Related
Hi folks,
I'm looking for advice to update to 23.1.A.1.28 Lollipop, I would prefer to do a nice fresh install with the 23.1.A.1.28 UK unbranded FTF file. I updated from 4.4.2 to 4.4.4 using the PRFCreator flashable zip. I have unlocked bootloader & would prefer to keep everything stock including kernel.
1. Can I do a full wipe in the dual recovery including wiping the entire internal SD & then flash the flashable zip? Or will the full wipe including formatting the internal SD wipe the recovery?
2. Just flash the 23.1.A.1.28 UK unbranded FTF file using flashtool & check all the wipe options before the flash & then use King root (even though Bitdefender flags it as possible virus when it has never ever flagged any other root exploit before) to root device & then run the latest NuT dual revovery?
3. I only use a couple of xposed modules that as far as I can read are compatible with xposed-sdk21-arm-20150430.zip & the correct steps to install xposed for Lollipop are
I. Flash xposed-sdk21-arm-20150430.zip in recovery after rooting with King root.
II. Install XposedInstaller_3.0-alpha2.apk to manage modules
III. Install Play store fixes & youtube adaway modules in the xposed app. I would like to use Lollipop Navigation Bar module but don't think it is compatible as yet.
The reason I want to do a fully clean install is due to the fact I have found the phone to run a bit slower since updating from 4.4.2 to 4.4.4 with the PRF creator flashable zip. This mainly shows in the apps screen which shows the loading bars for about 5-6 seconds & then takes another 10-15 seconds to list the apps & app sizes etc.
Sorry for all the questions, my previous devices were all Samsung so I'm used to full wipe including internal SD & then installing custom Rom.
Cheers in advance for any help given.
If you have unlouck bt you can just flash stock in flash tool and flash recovery after that because this best way you didn't have a problem
Cheers for the reply copra11
How would I flash recovery after flashing the FTF file with Flashtool? Can I use flashtool to flash recovery or just use the installer version of NuT's dual recovery?
Would I need to be rooted first before installing NuT recovery?
Another question I have is I still got app updates through the sony update centre app on 4.4.2 with unlocked bootloader but when I updated to 4.4.4 I never got any app updates through update centre at all, had to get them from here or xperiablog. Would relocking the bootloader allow me to get app updates again?
Can anyone else offer some advice? Would like to get this done today\tonight if possible.
Cheers.
on unlocked bootloader :
- Flash ftf using flashtool, once done unplug device
- Get twrp from here : http://dl.twrp.me/sirius, download *.img file - rename file to recovery.img for later use
- go in folder C:\Flashtool\x10flasher_lib (assuming you installed flashtools in the default place), paste recovery.img in this folder (from previous step)
- Put phone in fastboot mode (hold Vol-up while inserting usb cable)
- hold shift and right-click anywhere in folder (but not on any files) and choose "open command window here"
- in the cmd window that comes up type the following : fastboot flash recovery recovery.img
you'll get a short message about the flash being successful, then you can disconnect your phone.
Reboot your phone, once the let light is on during the first Sony screen press the power button multiple times, then you can enter recovery.
This is for Unlocked Bootloader ONLY, I also recommend using @AndroPlus awesome kernel, which includes its own recovery, in this case you can simply flash the kernel and not mess with the recovery, to do this :
- download latest @AndroPlus kernel from here http://dl.androplus.org/Xperia Z2 D6502_D6503_D6543/
- open zip file and extract boot.img from it
- copy boot.img to C:\Flashtool\x10flasher_lib
- Put phone in fastboot mode (hold Vol-up while inserting usb cable)
- hold shift and right-click anywhere in folder (but not on any files) and choose "open command window here"
- in the cmd window that comes up type the following : fastboot flash boot boot.img
Hope this helps
Cheers for the reply ticktock666
Thanks for the guide you posted, I assume once recovery is installed I can then just flash SuperSU or just flash the flashable zip I created with PRF Creator? Would just flashing SuperSU root the phone?
Again many thanks for your help
@ticktock666
Followed your first set of steps.
- Flash ftf using flashtool, once done unplug device
- Get twrp from here : http://dl.twrp.me/sirius, download *.img file - rename file to recovery.img for later use
- go in folder C:\Flashtool\x10flasher_lib (assuming you installed flashtools in the default place), paste recovery.img in this folder (from previous step)
- Put phone in fastboot mode (hold Vol-up while inserting usb cable)
- hold shift and right-click anywhere in folder (but not on any files) and choose "open command window here"
- in the cmd window that comes up type the following : fastboot flash recovery recovery.img
you'll get a short message about the flash being successful, then you can disconnect your phone.
Reboot your phone, once the let light is on during the first Sony screen press the power button multiple times, then you can enter recovery.
Click to expand...
Click to collapse
When I power on the phone there is no LED light & despite spamming the power button it just boots up normally into the first run wizard. The fastboot flash recovery recovery.img command says it flashed it ok as shown in image.
Do you have a D6503 model ? my friend does and his unit does not show the purple led light when booting like my unlocked D6502 one does, no idea why.
Have you tried spamming the vol-up OR vol-down button on reboot ? try this first then go down the kernel road, do the kernel steps, this way you'll 100% get the recovery (I never flashed the recovery image alone before). Once you install the kernel you simply need to press vol-up and you get the recovery.
a couple of things :
when flashing xposed, flash the zip from recovery, wipe cache/dalvik, boot into system, install apk, then from the xposed app do a Soft-reboot, and immediately enter recovery and do a cache/dalvik wipe, then reboot. This is how I usually do it and it's been working for me since .690, so I though I'd share, also I've tried the 2 navigation bar modules from the xposed repo at some point and they both worked, also gravitybox offers many navigation bar mods among other things.
just flashing SuperSU zip from recovery is enough for root, no need for the prerooted zip, you'll just just be reflashing the rom you already have.
@ticktock666
Yeah mate it's a D6503 model, have tried the steps several times & the cmd window shows the recovery as being installed but no LED light when booting & the power & volume up & down buttons have no effect either. Ended up flashing the Andro kernel you recommended & the LED was purple when booting & spamming power button got me into recovery.
Even tried adb reboot recovery before I flashed the kernel but still nothing, also for some reason when going through the first run wizard it didn't restore my google backup when I entered google account details.
Starting again from scratch using your guide so fingers crossed
BTW do you know a good sound boosting mod, I was using Sound Mod v3.1 For Z2 Normal.zip on 4.4.4 from this thread or this thread
Will follow your steps for installing xposed framework & app, bit surprised that dalvik would need to be wiped as Lollipop uses ART runtime instead but will play it safe
Cheers again for all the help mate, really appreciate it
guess the led thing is kernel related, but I have unlocked the bootloader only 3 days after getting the device, and have been using a custom kernel ever since, so this might be the issue.
I just wiped my device, since I somehow managed to royally fudge it up after the 1.28 update (maybe because I dirty flashed 690, 726, 1.28 on top of each other )
I did excatly what I told you, and i'm now doing a backup before testing some stuff (deodexing app & priv-app, bloatware removal script).
I never use any sound mods, since I mostly listen to audiobooks, so there's not much bass involved , as for dalvik I'm sure the folder exists (under "/", which is the root directory of the device), maybe to use with older apps that are not optimized for ART ? not sure really but better safe than sorry.
Also I recommend entering recovery using vol-up since you have Andro's kernel, since this one is optimized for our device (extra backup options and stuff)
Yeah mate, after flashing the FTF file & then going into fastboot mode & flashing the kernel the LED is purple & pressing volume up gets me into recovery.
I thought I had bricked the phone as I tried to use flashtool in fastboot mode to try & flash the recovery but phone was stuck on the sony logo screen, after panicking for a few mins I used the tiny reset button where the sim card goes & it vibrated a few times, was then able to reflash the FTF & use the Andro kernel
I needed the sound mod on 4.4.4 as I found the ringtone & notification volumes too low & kept missing calls etc when out & phone was in pocket. The mod added back xloud feature that helped boost the volume a good bit. From what I have read here about sony lollipop one of the biggest failings was volumes.
Sure I read somewhere that Lollipop removed the dalvik runtime completely but better to be safe than sorry & wipe cache & dalvik with xposed.
BTW is it ok to use streicson busybox installer to get the latest busybox installed, I know when I uses NuT's dual recovery you couldn't install it as it broke recovery?
Cheers again for all your help with this mate, hopefully I can help you out in future
All the best
The reboot button combination for the Z2 is Vol-up+power button, keep holding them until phone vibrates 3 times, better than looking around for something to push the tiny reset button with
as for busybox, I usually flash a zip, but the busybox app by streicson does the same thing.
I'm off to sleep now, and hope everything works for you nicely with no more issues
Hey guys,
I've had a total of 4 android smartphones during the last years, and I did root all of them and even install diferent ROM's, but on this phone (Honor 7) was kinda diferent.
The root process is way more complex than all the other androids I did root (simply flash a .zip file...) so I've been post-poning this task over and over..
Finally yesterday I gained courage to try out rooting my phone, and while attempting to root my Honor 7, after flashing SuperSU from TWRP, my phone no longer booted.
Stressed as I was, I just told to myself "f*ck it" and formatted the system and I didn't care much if there was a fix without needing to format the system. (but then I realised that I could not find any .img ROM files to flash from TWRP recovery, so basically I did my actions wrong once again)
I followed the tutorial from guidebeats.com which talks about rooting EMUI 4.0 Android 6.0 (I cant post links)
Basically this is the story:
While unlocking the bootloader, even though, the tutorial said the phone would reboot itself after typing "flashboot oem unlock 1234934829" I did a hard reboot (or reset?) holding (VOL+) + Power button and I have the feeling that the bootloader unlock was not 100% done, even if it said it was unlocked. (Phone was working perfectly fine there)
Then I flashed SuperSU, and I could no longer boot. After powering up my phone, after the first splashscreen, the screen would only turn black.
What (I think) I need to now is remove the TWRP recovery, and use the stock one and attempt to install an "update" using (Vol+) + (Vol-) + Power. (please correct me if I'm wrong)
But now there's some issues I got that I'd like some help with:
1- How can I get back to the stock recovery? (NOTE: I currently got no OS installed on my Honor 7, since I formated it)
2- Will I need to lock and unlock my bootloader again (if I want to 'fix' the bootloader unlock?)
3- Where can I get official Honor 7 stock ROM? (would be awesome if there was already the Android 6 stock rom for a clean install)
4- What are the steps on this tool (Honor 7 Multi-Tool) to root my phone?
I need my Honor 7 asap
Sorry for the long post, It's my first time doing a more advanced root and I have all these questions.
Thank you very much for any kind help!
joaomPT said:
Hey guys,
I've had a total of 4 android smartphones during the last years, and I did root all of them and even install diferent ROM's, but on this phone (Honor 7) was kinda diferent.
The root process is way more complex than all the other androids I did root (simply flash a .zip file...) so I've been post-poning this task over and over..
Finally yesterday I gained courage to try out rooting my phone, and while attempting to root my Honor 7, after flashing SuperSU from TWRP, my phone no longer booted.
Stressed as I was, I just told to myself "f*ck it" and formatted the system and I didn't care much if there was a fix without needing to format the system. (but then I realised that I could not find any .img ROM files to flash from TWRP recovery, so basically I did my actions wrong once again)
I followed the tutorial from guidebeats.com which talks about rooting EMUI 4.0 Android 6.0 (I cant post links)
Basically this is the story:
While unlocking the bootloader, even though, the tutorial said the phone would reboot itself after typing "flashboot oem unlock 1234934829" I did a hard reboot (or reset?) holding (VOL+) + Power button and I have the feeling that the bootloader unlock was not 100% done, even if it said it was unlocked. (Phone was working perfectly fine there)
Then I flashed SuperSU, and I could no longer boot. After powering up my phone, after the first splashscreen, the screen would only turn black.
What (I think) I need to now is remove the TWRP recovery, and use the stock one and attempt to install an "update" using (Vol+) + (Vol-) + Power. (please correct me if I'm wrong)
But now there's some issues I got that I'd like some help with:
1- How can I get back to the stock recovery? (NOTE: I currently got no OS installed on my Honor 7, since I formated it)
2- Will I need to lock and unlock my bootloader again (if I want to 'fix' the bootloader unlock?)
3- Where can I get official Honor 7 stock ROM? (would be awesome if there was already the Android 6 stock rom for a clean install)
4- What are the steps on this tool (Honor 7 Multi-Tool) to root my phone?
I need my Honor 7 asap
Sorry for the long post, It's my first time doing a more advanced root and I have all these questions.
Thank you very much for any kind help!
Click to expand...
Click to collapse
As you are already familiar with adb and other stuff so will write a short post for you.
To download latest firmware, head to
http://forum.xda-developers.com/hon...tock-firmware-packages-honor-7-t3448747/page1
Google, download and install Huawei update extractor and open UPDATE.APP in it (obtained after extracting firmware).
You can see all the images. Just extract recovery and boot to platform-tools folder.
Meantime, do the unlocking command again, with
Fastboot OEM unlock xxxxxxxxxxxxxxxx
Followed by fastboot reboot
And press and hold the vol down button again until you reboot in bootloader.
Flash the recovery and boot you extracted using
Fastboot flash recovery recovery.img
Fastboot flash boot boot.img
(I got a habit of extracting and flashing system and Cust using
Fastboot flash system system.img
Fastboot flash Cust Cust.img
But they are not necessary)
Now you are set to try a 3 button update (sometimes it gets stuck so if it's stuck for 15 minutes, try 3 button again).
Please do report back if it comes to life.
To root, just flash twrp and then use SuperSU 2.62 (no other version) and update it later using play store.
Sent from my PLK-L01 using XDA Labs
Hey!
Thank you alot for your reply.
From the link you sent about the firmwares, there are alot of Builds for the L01 (EU) model. Can I simply use the latest from the list or I gotta install 1 by 1 (from older to newer)?
Also, the bootloader unlock thing, is it ok if I wait to do it until I install the stock ROM again? Because I think I don't have the code anymore (Also don't know about IMEI)
Other thing, yesterday before bricking my phone, I tried to re-unlock the bootloader as you said above, but it didnt let me because "it was already unlocked".
I really have no idea if it's 100% unlocked or not.
important thing!
With those ROM's, I still have the right to receive official OTA updates from the HiCare app right?
Thank you again
joaomPT said:
Hey!
Thank you alot for your reply.
From the link you sent about the firmwares, there are alot of Builds for the L01 (EU) model. Can I simply use the latest from the list or I gotta install 1 by 1 (from older to newer)?
Also, the bootloader unlock thing, is it ok if I wait to do it until I install the stock ROM again? Because I think I don't have the code anymore (Also don't know about IMEI)
Other thing, yesterday before bricking my phone, I tried to re-unlock the bootloader as you said above, but it didnt let me because "it was already unlocked".
I really have no idea if it's 100% unlocked or not.
important thing!
With those ROM's, I still have the right to receive official OTA updates from the HiCare app right?
Thank you again
Click to expand...
Click to collapse
Just use B380 as it's the latest full firmware available there.
Unlocking bootloader again was just a precautionary measure (proceed without it and if it is not 100% unlocked and if something goes wrong, we can troubleshoot later, which imo, won't happen)
And yep, if you keep the firmware as it is, but if you flash twrp and root, you will still see the update available in Hicare but will have to install stock recovery again before upgrading. (Nothing else is needed as SuperSU 2.62 gives a systemless root so you only need to flash back stock recovery for an update)
I am not against honor-tool bit it's best to do things manually as it makes you learn stuff and is easy to troubleshoot if something is amiss.
Sent from my PLK-L01 using XDA Labs
muradulislam said:
Just use B380 as it's the latest full firmware available there.
Unlocking bootloader again was just a precautionary measure (proceed without it and if it is not 100% unlocked and if something goes wrong, we can troubleshoot later, which imo, won't happen)
And yep, if you keep the firmware as it is, but if you flash twrp and root, you will still see the update available in Hicare but will have to install stock recovery again before upgrading. (Nothing else is needed as SuperSU 2.62 gives a systemless root so you only need to flash back stock recovery for an update)
I am not against honor-tool bit it's best to do things manually as it makes you learn stuff and is easy to troubleshoot if something is amiss.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Alright, btw, about the thing you said
"Now you are set to try a 3 button update (sometimes it gets stuck so if it's stuck for 15 minutes, try 3 button again)."
I gotta do that myself with an "update.app" file or what?
Sorry, I missed that part
Cheers!
joaomPT said:
Alright, btw, about the thing you said
"Now you are set to try a 3 button update (sometimes it gets stuck so if it's stuck for 15 minutes, try 3 button again)."
I gotta do that myself with an "update.app" file or what?
Sorry, I missed that part
Cheers!
Click to expand...
Click to collapse
You have to make a dload folder in SD card and copy UPDATE.APP to that folder.
Then just turn off the phone, press and hold power + vol up + vol down until phone boots.
Let go of power but keep others two pressed for 5, 6 sec more. Your phone will boot into recovery and start installing UPDATE.APP
It likes to get stuck at 5% (most reports) but sometimes, somewhere else. If its stuck for 15 minutes on a particular percentage, just press and hold the above three buttons again using the same process.
Multiple tries make it work...
Sent from my PLK-L01 using XDA Labs
muradulislam said:
You have to make a dload folder in SD card and copy UPDATE.APP to that folder.
Then just turn off the phone, press and hold power + vol up + vol down until phone boots.
Let go of power but keep others two pressed for 5, 6 sec more. Your phone will boot into recovery and start installing UPDATE.APP
It likes to get stuck at 5% (most reports) but sometimes, somewhere else. If its stuck for 15 minutes on a particular percentage, just press and hold the above three buttons again using the same process.
Multiple tries make it work...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Hey man!
Good news, my phone is alive and root is done.
The problem was on the SuperSU that I flashed, it was version 2.71, instead of the one you said » version 2.62 «
I cant thank you enough!! Can I pay you a coffee?
Thank you!
joaomPT said:
Hey man!
Good news, my phone is alive and root is done.
The problem was on the SuperSU that I flashed, it was version 2.71, instead of the one you said �?�» version 2.62 �?�«
I cant thank you enough!! Can I pay you a coffee?
Thank you!
Click to expand...
Click to collapse
That's great... Enjoy your phone and as for coffee, well, let's say, you owe me one and we will leave it at that
Better yet, you can search DigiGoon and pay him for the coffee, he taught me what I told you.
You can find him somewhere in this thread
http://forum.xda-developers.com/honor-5x/help/honor-5x-kiw-ul00-boot-loop-t3449554/page1
Decision is yours
muradulislam said:
That's great... Enjoy your phone and as for coffee, well, let's say, you owe me one and we will leave it at that
Better yet, you can search DigiGoon and pay him for the coffee, he taught me what I told you.
Whichever you like...
Click to expand...
Click to collapse
Alright man, cheers
joaomPT said:
Alright man, cheers
Click to expand...
Click to collapse
Hello
How did you format your phone?
I'm still struggling with going back to Android 5 and EMUI 3.1 since there is no rollback file available. (PLK-AL10, B396) Maybe formatting and installing the old rom could be a solution, like in your case?
tgergo said:
Hello
How did you format your phone?
I'm still struggling with going back to Android 5 and EMUI 3.1 since there is no rollback file available. (PLK-AL10, B396) Maybe formatting and installing the old rom could be a solution, like in your case?
Click to expand...
Click to collapse
Hello.
Do you have unlocked bootloader and TWRP recovery? You can format your phone from TWRP recovery.
I think the only option for you is to get the old ROM img and flash it (starting from 0)
You can dirty-flash (Flash a different ROM with same android version as yours, e.g: flashing custom android 5 ROM over your stock android 5 ROM without factory resetting your phone) but I dont think you can do that from Android 6 to 5.
joaomPT said:
Hello.
Do you have unlocked bootloader and TWRP recovery? You can format your phone from TWRP recovery.
I think the only option for you is to get the old ROM img and flash it (starting from 0)
You can dirty-flash (Flash a different ROM with same android version as yours, e.g: flashing custom android 5 ROM over your stock android 5 ROM without factory resetting your phone) but I dont think you can do that from Android 6 to 5.
Click to expand...
Click to collapse
Yes I have unlocked bootloader and currently not twrp but I can flash it at any time.
The last two paragraphs you wrote are different solutions or the last one is a more detailed explanation of the previous?
I have android 6 so the later method won't work as you said.
But formatting it and flashing a stock android 5 rom - is it that simple? Nobody here suggested this before, however I have been asking for months.
All the phones are empty when they leave the assembly line.
How did you flash the new rom to your formatted phone? Extracted update.app and flashed each file with fastboot? Any issues you faced?
tgergo said:
Yes I have unlocked bootloader and currently not twrp but I can flash it at any time.
The last two paragraphs you wrote are different solutions or the last one is a more detailed explanation of the previous?
I have android 6 so the later method won't work as you said.
But formatting it and flashing a stock android 5 rom - is it that simple? Nobody here suggested this before, however I have been asking for months.
All the phones are empty when they leave the assembly line.
How did you flash the new rom to your formatted phone? Extracted update.app and flashed each file with fastboot? Any issues you faced?
Click to expand...
Click to collapse
From my last 2 paragraphs, the first was a solution, the second was an impossible alternative that I thought it would work.
My issue was that I had a custom recovery but I had no ROM installed, so I had to install the stock recovery and boot (extracting from update.app) and flashing it via fastboot, to afterwards force the update with 3-button method.
-----
What you'll need to do is:
- Flash TWRP
- Wype system, data, cache.. (so that you completely delete your current ROM)
- Extract recovery.img and boot.img from an update.app of an Android 5 ROM you'd like to have (Official ROM for your device model)
- Flash them via fastboot (You'll go back to stock recovery again)
- Shutdown your device
- Create a folder named "dload" on your sdcard and put UPDATE.APP file in it.
- Reboot
- Do the 3-Button update ([Vol+] + [Vol-] + Power)
- If it works, it will auto install
(- If it gets stuck on 5% for over 5/10min, force reboot pressing [Vol+] + Power) and try again the installation
- After installing it will boot normally (first boot takes a while)
NOTE: I'd recommend creading the dload folder before wiping the ROM, because usb didnt work for me afterwards. (It would still work if I was on recovery tho)
>> Remember to make a full system backup before wiping aswell, dont be stupid like me xD (thats why I had to full wipe my system after soft-brick)
Im answering based on what I did and was explained here to me
joaomPT said:
From my last 2 paragraphs, the first was a solution, the second was an impossible alternative that I thought it would work.
My issue was that I had a custom recovery but I had no ROM installed, so I had to install the stock recovery and boot (extracting from update.app) and flashing it via fastboot, to afterwards force the update with 3-button method.
-----
What you'll need to do is:
- Flash TWRP
- Wype system, data, cache.. (so that you completely delete your current ROM)
- Extract recovery.img and boot.img from an update.app of an Android 5 ROM you'd like to have (Official ROM for your device model)
- Flash them via fastboot (You'll go back to stock recovery again)
- Shutdown your device
- Create a folder named "dload" on your sdcard and put UPDATE.APP file in it.
- Reboot
- Do the 3-Button update ([Vol+] + [Vol-] + Power)
- If it works, it will auto install
(- If it gets stuck on 5% for over 5/10min, force reboot pressing [Vol+] + Power) and try again the installation
- After installing it will boot normally (first boot takes a while)
NOTE: I'd recommend creading the dload folder before wiping the ROM, because usb didnt work for me afterwards. (It would still work if I was on recovery tho)
>> Remember to make a full system backup before wiping aswell, dont be stupid like me xD (thats why I had to full wipe my system after soft-brick)
Im answering based on what I did and was explained here to me
Click to expand...
Click to collapse
I'll try... But seems too simple to be true...
joaomPT said:
From my last 2 paragraphs, the first was a solution, the second was an impossible alternative that I thought it would work.
My issue was that I had a custom recovery but I had no ROM installed, so I had to install the stock recovery and boot (extracting from update.app) and flashing it via fastboot, to afterwards force the update with 3-button method.
-----
What you'll need to do is:
- Flash TWRP
- Wype system, data, cache.. (so that you completely delete your current ROM)
- Extract recovery.img and boot.img from an update.app of an Android 5 ROM you'd like to have (Official ROM for your device model)
- Flash them via fastboot (You'll go back to stock recovery again)
- Shutdown your device
- Create a folder named "dload" on your sdcard and put UPDATE.APP file in it.
- Reboot
- Do the 3-Button update ([Vol+] + [Vol-] + Power)
- If it works, it will auto install
(- If it gets stuck on 5% for over 5/10min, force reboot pressing [Vol+] + Power) and try again the installation
- After installing it will boot normally (first boot takes a while)
NOTE: I'd recommend creading the dload folder before wiping the ROM, because usb didnt work for me afterwards. (It would still work if I was on recovery tho)
>> Remember to make a full system backup before wiping aswell, dont be stupid like me xD (thats why I had to full wipe my system after soft-brick)
Im answering based on what I did and was explained here to me
Click to expand...
Click to collapse
Hi again,
I'm doing this OS installation now. It starts fine but stucks at 90%, (I'm trying to install the latest stock ROM which can be downloaded from Huawei site, B220 or221). Did you have the same issue? I waited more than half an hour at 90% but did not go on.
tgergo said:
Hello
How did you format your phone?
I'm still struggling with going back to Android 5 and EMUI 3.1 since there is no rollback file available. (PLK-AL10, B396) Maybe formatting and installing the old rom could be a solution, like in your case?
Click to expand...
Click to collapse
Maybe formatting, Flash stock Android 5 recovery using Honor multitool , and then Flash a Android 5 firmware
Not sure it Will Work without rollback..
Finally, after 2 months of struggling I managed to get back to Android 5 and EMUI 3.1 without a rollback file.
Here is what I did:
0. Download a full ROM you want to install
1. Backup of the current system with Hisuite (everything. Apps, media, contacts, call log, etc.)
2. Flash TWRP recovery with fastboot (start phone in fastboot mode)
3. Wipe (and format!) everything you can with TWRP
4. Extract boot.img and recovery.img from update.app of the new ROM with Huawei Update Extractor
5. Flash boot.img and recovery.img with fastboot.
6. Copy update app to dload folder on SD card, insert into the phone.
7. Restart phone with [VOL+] + [VOL-] + [Power] buttons to force update.
8. The system will be installed from SD card. I had no issues with the installation. First I did not format the phone (just wiped) and it did not work.
9. Restore data from backup.
The only strange thing is that the native app icons look different than my previous lollipop system. Don't know why. They are less colorful. I installed C00B220 for PLK-AL10.
tgergo said:
Finally, after 2 months of struggling I managed to get back to Android 5 and EMUI 3.1 without a rollback file.
Here is what I did:
0. Download a full ROM you want to install
1. Backup of the current system with Hisuite (everything. Apps, media, contacts, call log, etc.)
2. Flash TWRP recovery with fastboot (start phone in fastboot mode)
3. Wipe (and format!) everything you can with TWRP
4. Extract boot.img and recovery.img from update.app of the new ROM with Huawei Update Extractor
5. Flash boot.img and recovery.img with fastboot.
6. Copy update app to dload folder on SD card, insert into the phone.
7. Restart phone with [VOL+] + [VOL-] + [Power] buttons to force update.
8. The system will be installed from SD card. I had no issues with the installation. First I did not format the phone (just wiped) and it did not work.
9. Restore data from backup.
The only strange thing is that the native app icons look different than my previous lollipop system. Don't know why. They are less colorful. I installed C00B220 for PLK-AL10.
Click to expand...
Click to collapse
Is this really work? i cant rollback to any version.
Yuaru said:
Is this really work? i cant rollback to any version.
Click to expand...
Click to collapse
Yes it does. (It did for me.) Technically this is not a rollback but installing a brand new system on an empty phone. That's why it is important to do a backup upfront.
tgergo said:
Yes it does. (It did for me.) Technically this is not a rollback but installing a brand new system on an empty phone. That's why it is important to do a backup upfront.
Click to expand...
Click to collapse
Thanks for the answer. Im gonna try this method. I can't reflash any region rom.
Back to Stock with @raystef66's Files
This guide used a method stemmed from paranoia. Now that we have decent flashable files everything is much simpler!
We'll be using raystef66's flashable TWRP files to go completely back to stock. At the end there's instructions if you want to lock your bootloader.
Be sure that you are on the latest TWRP version!
1) Files to Download:
- TWRP Flashable Bootstack/Stocksystem Image from here: Download Center. Download the latest BOOTSTACK and STOCKSYSTEM from there.
- If you want to lock the bootloader, also download the STOCK RECOVERY zip from the same stocksystem version that you downloaded. The flashable stock recovery zips are on the Factory Images Division, right above the TWRP flashable files.
- Magisk 15.2 (or latest), or SuperSU 2.79 (Latest not recommended ). If you will relock the bootloader, skip this part.
2) Installation
- Put all the files on the internal storage or SD card. Backup your important stuff from the internal storage, because you might need to format it!
- Go to TWRP. Wipe data, system and cache (don't format data though).
- Install the bootstack that you downloaded. Then install the stock system.
- If you will NOT relock the bootloader, install Magisk or SuperSU
- Reboot
If the phone asks for a password when it gets to the system, go to TWRP. It will ask for a password, just select Cancel. After you're on the main TWRP screen, select Wipe, then Format data, then type yes. After that, reboot.
3) 5 second screen removal / restore Fastboot
This is useful whether you're relocking the bootloader or not. Just go to raystef66's guide and follow it completely. After doing it your phone will have Fastboot (very good for softbricks and relocking), no 5 seconds screen (your phone will boot up faster) and it will be even closer to full stock.
4) ONLY FOR RELOCKING - Replace TWRP with Stock Recovery
Simply go to TWRP and flash the stock recovery file you downloaded. After that, enable OEM unlocking and USB debugging from the dev options, and then go to Fastboot and issue "fastboot oem lock".
@Choose an username... thanks for the credits.
you can return to stock in that way. you can reflash twrp with tool, allways checking bootloader still unlocked.
I allway update in this way, reboot to twrp, flash the recovery image, not a zip, its the same, but I make sure that the recovery correspond to the base version in my phone. after that, I reboot to system directly, update in the ota way, or the zip way, but from running android, rooted or not, and I dont have to wipe.
After update is done, the most important thing is leave the phone till it is completly booted, then you can reflash twrp with axon7tool again.
You dont need to root, you dont need anything to keep twrp. You only need to flash supersu or magisk if you use darkenfx zips. And if you do it, you have to backup wipe and restore cause you lose encryptation.
But thats all. I think stock rom its still the best, not in battery life, but in camera and bundled apps, It works perfectly, except, I have 2 bugs since allways, wake up with proximity sensor covered, and whatsapp online with app in background, I can live with that
I can re-lock bootloader after this process?
thanks for the guide.
Help Needed ! A2017g Bricked while trying to returning to stock
Hi, Please help me to get my Axon 7 in a working state. I was using Xenon HD Rom for A2017g Oreo. With twrp version as suggested in the guide.
I followed the procedure, installed the bootstack and then stock system B09
But when I tried to reboot, it said no OS Installed. Then I rebooted, and it was stuck at bootloader with no twrp and just the message as follows :
Android Recovery : ZTE/P996A04_N/ailsa_ii
7.1.1/NMF26V/20171120.101942
user/release-keys
Use volume up/down and power
and then certain other options in blue
Please help !
I also have a Problem.
I tried going back to stock from LOS 14.1. Now I am stuck on the 5 seconds screen, it won't continue.
The files I used were the Nougat B10 Files :-/
HansWursT619 said:
I also have a Problem.
I tried going back to stock from LOS 14.1. Now I am stuck on the 5 seconds screen, it won't continue.
The files I used were the Nougat B10 Files :-/
Click to expand...
Click to collapse
Enter the recovery, it should be the stock one (turn the phone off, then hold vol+ and power). Then download a stock B10 file (not the twrp flashable one) and install it from an SD card
No its not the stock one, its still TWRP.
I only flashed Bootstack and stock system (step 2). The reboot afterwards doesnt work
What do you mean by "a stock B10 file"? There are so many files types :-/
I am not quite sure what I should do now, do I have to do the EDL route? That one sounds confusing as well.
EDIT: I tried using B08 Files and now the reboot prompt in TWRP tells me there is no os installed.
Will I, like naveen09y, end up without TWRP if I reboot now?
HansWursT619 said:
No its not the stock one, its still TWRP.
I only flashed Bootstack and stock system (step 2). The reboot afterwards doesnt work
What do you mean by "a stock B10 file"? There are so many files types :-/
I am not quite sure what I should do now, do I have to do the EDL route? That one sounds confusing as well.
EDIT: I tried using B08 Files and now the reboot prompt in TWRP tells me there is no os installed.
Will I, like naveen09y, end up without TWRP if I reboot now?
Click to expand...
Click to collapse
Probably, so just don't. You should just wipe system and data, flash the bootstack, then the system. Also follow raystef's guide to "remove bootloader unlocked inscription"
I now managed to get the phone working with EDL flash of MM B10.
But I cant relock the bootloader :-/
Bascially my bootloader is gone so I cant reboot to it and do "fastboot oem lock".
Why is this such a hassle
HansWursT619 said:
I now managed to get the phone working with EDL flash of MM B10.
But I cant relock the bootloader :-/
Bascially my bootloader is gone so I cant reboot to it and do "fastboot oem lock".
Why is this such a hassle
Click to expand...
Click to collapse
You didn't follow my instructions. Follow raystef's removed unlocked bootloader inscription and you'll get fastboot back. You can do that with the phone on.
Don't relock it unless it's really necessary (i.e. warranty). If you're gonna sell it just follow that guide and don't relock, the 5 seconds screen will disappear and it'll look like it's locked
I cant follow the guide because I can't access the bootloader...
Also the TWRP files in https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379 this guide (step 6) are no longer accessible.
HansWursT619 said:
I cant follow the guide because I can't access the bootloader...
Also the TWRP files in https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379 this guide (step 6) are no longer accessible.
Click to expand...
Click to collapse
What? Lol
First of all - you are basically installing the bootloader with raystef's guide, so I have no idea why you want to enter it...
You have to enter TWRP and follow the guide from there.
The guide from Controllerboy is basically the same guide but it also has instructions on other things (i.e. unlock etc.). I don't know what you are trying to accomplish with it. Use EDL Tool by djkuz if you want to install TWRP (it is explained there how to do that).
Phone was rooted with Magisk 16, I was on AEX Android 8.1 ROM. I'm trying to return to stock and relock bootloader.
I wiped everything, I flashed A2017G-N-B10-bootstack and A2017G-N-B10-stocksystem from "TWRP flashable Bootstack/Stocksystem Images" section. Booted to system and now phone is stuck on the ZTE POWERED BY android boot screen. 5 minutes there. Is it normal?
Edit: Got tired of waiting and kept pressing the power button. After doing so, the phone reboots but same thing. And I can't access TWRP with VOL INCREASE + POWER BUTTON.... VOL DECREASE + POWER BUTTON takes me to Factory Test Mode.
aLexzkter said:
Phone was rooted with Magisk 16, I was on AEX Android 8.1 ROM. I'm trying to return to stock and relock bootloader.
I wiped everything, I flashed A2017G-N-B10-bootstack and A2017G-N-B10-stocksystem from "TWRP flashable Bootstack/Stocksystem Images" section. Booted to system and now phone is stuck on the ZTE POWERED BY android boot screen. 5 minutes there. Is it normal?
Edit: Got tired of waiting and kept pressing the power button. After doing so, the phone reboots but same thing. And I can't access TWRP with VOL INCREASE + POWER BUTTON.... VOL DECREASE + POWER BUTTON takes me to Factory Test Mode.
Click to expand...
Click to collapse
Try this.
Oki said:
Try this.
Click to expand...
Click to collapse
Yes, thanks. I already had seen it some minutes ago. It's so convenient that you posted this guide today lol
I want to flash stock rom from RR Nougat. I have installed latest twrp, flash bootstack and then stock system. After that I flash supersu 2.79. But when I press reboot system it say no OS installed
Willchi said:
I want to flash stock rom from RR Nougat. I have installed latest twrp, flash bootstack and then stock system. After that I flash supersu 2.79. But when I press reboot system it say no OS installed
Click to expand...
Click to collapse
The best way to return to stock is via EDL, for example MiFlash or EDL tool. If you have an U, then DrakenFX's zips can do that, it happened to me already. Usually G zips like raystef's work just fine.
Try using Magisk instead of SuperSU, just in case. Use 16.7
@Choose an username...
Thanks for posting this.
Credits to all concerned a big thumbs up.
I do however feel that there are to many versions of the Axon 7 packages and I can see why people are ending up with boot issues etc.
Syberclone said:
@Choose an username...
Thanks for posting this.
Credits to all concerned a big thumbs up.
I do however feel that there are to many versions of the Axon 7 packages and I can see why people are ending up with boot issues etc.
Click to expand...
Click to collapse
what
you do realize this guide is older than a year right?
Yeah, its all good
Hi all,
I went ahead and rooted my Mate 10 Pro today - I unlocked my bootloader, installed TWRP and got it running pretty sweet. Then, like a tool - tried installing xposed framework and got myself into a boot loop.
I can get to fastboot, I can get into twrp - but for the life of me don't know how to get a system wipe and fresh format! I've tried flashing LineageOS - but that's stuck on a loading screen and then boot loops after about 10minutes.
What happens is I turn my phone on - see the bootloader message - if I do nothing there's a 50/50 changes Huawei's eRecovery window opens (where if i connect it to the wifi, it fails and gives me the option of reboot or shutdown) or LineageOS boot animation loops for about 10minutes before shutting down.
At this stage, I don't mind what rom i get working - i just want something working and I'm really regretting xposed (I should of googled!).
I really don't want to pay $40 usd - and am happy tinkering around, but would appreciate some solid advice on how I can use TWRP to wipe everything and start again!
I'm also a little confused as to why eRecovery is coming up at all - and why it can't download anything!!!!!
Can someone help me get a phone back?
Thanks!
Yeah, I bootlooped going with xposed too, but I have the Mate 10 (regular) and no TWRP. Can you get to TWRP and simply flash a clean ROM? If not, which I presume is the case, can you get to Fastboot? To try, when you get to the eRecovery window, use the option to shut down your phone. Then press the power button and, while holding it, plus in your USB cable (the other end which should already be attached to your computer). Then go to Mankindtw's thread for flashing ROMs (Mate 10 Flash Oreo one). Basically, you download three zip files from a russian language page with all the latest Huawei ROMs, repackage them within his utility, and then flash them from within his utility. Worked for me.
download update.zip (for your firmware) from http://pro-teammt.ru/firmware-database
Extract update.app from update.zip
Download Huawei Update Extractor (open it and go to settings and disable header check)
Open update.app in Huawei Update Extractor
Extract SYSTEM from update.app using Huawei Update Extractor.
(Not sure if Xposed modifies vendor too, so you might have to extract that as well)
Fastboot flash system system.img
See if it boots now. If not you could try extracting recovery_ramdisk and flash recovery_ramdisk.img to the recovery_ramdisk partition then factory reset from stock recovery.
If it does modify vendor you'd have to flash vendor as well.
Or you could try flashing lineage os system, flash recovery_ramdisk and factory reset from stock recovery (factory reset is needed to get aosp roms running)
If it still fails, use mankindtws HWOTA as described by rogerinnyc above. (link: https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814)
Stock rom seems to be installing. TY for your help
Toldorn said:
The problem I'm having now is, on my win7 and win10 pc's - when I enter fastboot, neither PC will accept drivers for it and therefore, I can't fastboot flash anything.
I just get '<waiting for device>' even when plugged in (and windows 'driver no successful' message)
Is there a way to transfer the files via twrp adb sideload?
Click to expand...
Click to collapse
Sadly no, this corresponds to reflashing the whole phone, block by block.
have you tried to find matching drivers ? (it should be pretty easy on windows 10 normally...)
Toldorn said:
The problem I'm having now is, on my win7 and win10 pc's - when I enter fastboot, neither PC will accept drivers for it and therefore, I can't fastboot flash anything.
I just get '<waiting for device>' even when plugged in (and windows 'driver no successful' message)
Is there a way to transfer the files via twrp adb sideload?
Click to expand...
Click to collapse
ChriKn said:
Sadly no, this corresponds to reflashing the whole phone, block by block.
have you tried to find matching drivers ? (it should be pretty easy on windows 10 normally...)
Click to expand...
Click to collapse
Install this regfix https://www.dc-unlocker.com/huawei-mate-10-fastboot-usb-device-not-recognised-fix
However, you would probably have had problems before too when flashing twrp.
But worth a shot I guess.
Didn't see it said you tried on win 7 too.
And if it worked before on Win 10 it should work without it.
I guess you could push system.img to /data/system.img then tap Install and selectInternal storage, tap on (go up one level) in browser, now you'll be at /. Tap on /data and then on system.img. Flash to 'System Image'.
Edit: I've tested with recovery and that flashes fine from /data/.
please see below;
Hi all. My SDCARD was encrypted in TWRP, so I googled and saw I should run this command;
recovery --wipe_data --set_filesystem_encryption=off
Which I did on TWRP terminal - and now im boot looping again. I tried fastboot system.img and it's still bootloading. I see there's supposed to be a 'boot.img' in my update.app, but there isn't.
Any ideas?
Toldorn said:
Hi all. My SDCARD was encrypted in TWRP, so I googled and saw I should run this command;
recovery --wipe_data --set_filesystem_encryption=off
Which I did on TWRP terminal - and now im boot looping again. I tried fastboot system.img and it's still bootloading. I see there's supposed to be a 'boot.img' in my update.app, but there isn't.
Any ideas?
Click to expand...
Click to collapse
Boot.img is for Nougat. Oreo uses ramdisk.
Try wiping data in TWRP (Wipe - Format Data).
You can't turn off encryption in TWRP. It's controlled by /vendor/etc/*.fstab (* = kirin970 in this case). (You can temporarily turn off encryption but it re-encrypts after booting if fstab is untouched)
But removing encryption won't fix you bootlooping, and that command you used is for Full disk encryption, we use file based encryption.
You could also try flashing back stock recovery and do factory reset from there.
Edit: Oh, you're the guy who PM'd me
I've reflashed my 'system.img' as before - but im having trouble getting into factory reset menu.
all it ever does is go into e'Recovery instead, which is useless.
Also, my booting image is still a green page of pixels - rather than a huawei logo.
Hi. I have a bla-a09 and need help. can boot into twrp but will not boot.
Hey guys,
I already soft bricked my device (I think) -.- I rooted it with the patched boot image and accidently installed a magisk module which caused a boot loop.
I booted into TWRP and didn't read that for now we can't mount the important partitions, so there went that. I rebooted to stock recovery and erased my complete device (factory reset + userdata) and now it bootloops into the bootloader.
Can't boot stock recovery or ROM.
Is there any chance to recover it with the current tools we have or do I have to wait for a fully working TWRP?
Any tip is appreciated
Is this topic something you can work with?
https://forum.xda-developers.com/7t-pro/development/recovery-oxygen-os-stock-recovery-adb-t3991865
MarkSnijders said:
Is this topic something you can work with?
https://forum.xda-developers.com/7t-pro/development/recovery-oxygen-os-stock-recovery-adb-t3991865
Click to expand...
Click to collapse
Thanks for the hint, but no chance. After flashing the recovery and reboot, the 7t pro always reboots to bootloader :-\
Edit: Could switch the boot slot and was able to enter recovery. Tried the modified one with adb function, but sideloading a rom is not possible adb: sideload connection failed: closed
I think I have to wait for TWRP
dre-z said:
Thanks for the hint, but no chance. After flashing the recovery and reboot, the 7t pro always reboots to bootloader :-\
Edit: Could switch the boot slot and was able to enter recovery. Tried the modified one with adb function, but sideloading a rom is not possible adb: sideload connection failed: closed
I think I have to wait for TWRP
Click to expand...
Click to collapse
Try this:
- Reboot to bootloader (If not possible, hold "Volume Down" & "Powerbutton" to boot into recovery, from there select "Boot Fastboot")
- Open CMD and type "fastboot flash boot boot.img" (I attached the 7tPro AA Boot.img)
##EDIT##: Well, unfortunately I'm not allowed to post extern links, so you have 2. options. Somewhere here in the Opt7tPro threads, some guy posted a link where he uploaded the stock boot image. Should be found here https://forum.xda-developers.com/7t-pro/help/rooting-oneplus-7t-pro-t3983533/page2 (scroll down ). Option 2, you downlaod the 7T OTA from OP website and extract the payload.bin with the programm "payload_dumper-win64". This will extract a more or less working boot image..
Your phone should then be able to boot normally again.
If it does, you will probably find out, that your WiFi, Speakers & Camera won't work.
Don't worry, this is because you maybe need the BA boot.img.
Then there are to options.
1. You wait until OP releases the original files on their website, as they did with the 7t
2. You go to "Settings", "System" & "Factory Reset", to reset your phone. (By now, this is the only way to fix the problem, so you can use the patched boot again)
If you choose option 2, after the "installation" screen, where it asks to enter your language, you must boot your phone into fastboot again.
Then you can flash the patched boot image again and your phone should work as normal
I was on same situation, i planned to root, but not found really 7T PRO rom, 7T ot 7 PRO has totally different ROMs, so i made a big mistake, to flash different rom. Phone stuck in boot loop. After 1.5 day google searching, i found one, that can bring back phone to live. I found a fresh 7T PRO rom, and simply flashed back, it booted, and finally everything's works good. Must to download fresh factory rom: https://androidfilehost.com/?fid=4349826312261606254, unzip it to any folder, start your phone in fastboot mode, plug in usb cable, (other eng plug to PC) and then simply do double click at the unzipped folder to flash all.bat file. You will get some errors, it's totally normal. Within 4-5 minutes your phone will works again. Hope it will work at you.
You, my fellow xda guys, are amazing!!! The solution with the stock boot.img helped me out!
Now I can start using my 7t pro after 3 days ^^