hello, i have problem, i have thl t6s and i have damaged recovery, i tried to change os with original android recovery, but it didnt work, so i rooted android, unlocked bootloader and with adb change recovery, used twrp, carliv, cwm and no one work. then i unlock bootloader (i think twrp was installed), and my phone cant boot android, only restarts. recovery mode and normal boot mode dont work, works only fastboot. how can i fix my problem? sry for english, thanks for answers
Read this :
https://flashstockrom.com/flash-stock-rom-thl-t6s/
thanks, i have it, it worked
Related
Hi guys, now here again.
I would like to install a Costum Rom. I have problems that I can not reconstruct or apparently no one had before me.
I rooted my TF201 with DebugfsRoot_Generic_v2.3 tool. Worked well.
After this I installed the CWM via RomManager. I realized I forgot to unlock the boot loader.
So I unlocked the Bootloader via ASUS Tool.
Then I tried to access to the CWM. Did not work. Does not work, not from RomManager and not on the Volume Down + Power.
So I asked. I recommend the TWRP is articulated.
Goomanager loaded and instaled rcovery. Now I get into the recovery. but only from the CWM??` I have tried a backup. Gets: "Boot image Error" What can i do now? Starting the TF201 tells me the device is unlocked and I can also boot as normal. But I think fastboot and ADB does not work.
What can I do now? I am at the end.
Please help me. Thanks for the support.
Hi. I have had the OnePlus X for a very long time, and I have recently bricked .
Ok, here it goes :fingers-crossed:. I had a OnePlus X running CM13 with TWRP but a locked bootloader. I decided to try cyanogenmod recovery but soon realized it was terrible.
I was unable to flash img. files and the UI was unappealing to me. However at that point I was able to reboot into my ROM (CM13) with no issues. Knowing this, I thought that the only way I could get TWRP back was through a fastboot command (fastboot flash recovery recovery.img).
For me to execute that command, I needed to unlock my bootloader first, so I took all the necessary steps in the developer options settings menu. I then booted into fastboot mode and executed this command: fastboot oem unlock. This was my big mistake, as I read up after that you should not unlock bootloader on a custom recovery.
After executing this command, it booted me into recovery. I tried many times without success to wipe data and flash a rom zip via external sd card but they never worked. To make things worse, I was unable to boot up the device. Whenever I tried to power on the device, it booted straight into recovery. I am able to boot into fasboot and recovery, but that is pretty much it. Can someone please help me? I am willing to donate.
If you were able to flash the Cyanogen recovery with a locked bootloader you should be able to flash the official OPX recovery as well. You can download that from this link: https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img
Then you should be able to unlock the bootloader!
Or if @Tanner1294's doesn't help, flashing stock rom via fastboot will surely help..
PS: Don't ever flash anything on a locked bootloader.
i cant boot up my phone(moto g 1st gen-- FALCON) .... it's stuck in a boot loop running cm13 and recovery twrp 3.0.0-0
the phone only boots the boot loader and recovery....but the recovery is in read only mode ... and there is no option to change it to read-mode ..... when i try to flash any rom, it takes a lot of time at first and at the end there is a STATUS 7 error.... i tried to search for the error and found out a fix by changing asserts... but it din't work. i tried to flash another recovery using flastboot(cwm or another version of twrp) it was successful but when it rooted back to the recovery it din't change.. same twrp3.0.0
i also tried to flash rom using adb side-load ...but din't work
seems like recovery is in some kind of read only mode ...it does not allow to perform any action other than clearing cache ...
i tried to unroot and install stock firmware through commands at the boot loader but there were some errors ....so din't worked
also can't copy move or delete any files from internal memory (though adb push command works ...only for root directory)
my phone now is good for nothing ... like a hard brick..
any help would be greatly appreciated ...thanks
No matter how I try to flash the TWRP recovery image to the recovery partition, TWRP gets replaced by the crappy stock recovery!! This is absolutely maddening!
Specifically, it seems that no matter what method to use to flash the TWRP recovery, it gets overriden by the stock loader when the phone reboots.
My bootloader is UNLOCKED and I've installed a custom rom just fine by using the command fastboot boot twrp.img to boot into the twrp image. This is the only way I'm able to use TWRP at all.
I've tried:
fastboot flash recovery twrp.img
Booting into TWRP, and flashing the image over the recovery partition
Flashify to flash the TWRP over the recovery partition from within the rom
Trying to flash cyangenmod's recovery from within the rom (was pretty desperate at this point..)
I've also tried many different versions of TWRP, I can boot into them just fine but none of them stick when I flash them to the recovery partition.
It always says it's successful when I try to flash it, I reboot into recovery, and it boots into the piece of crap EmUI stock recovery screen every time
Anyone have any pointers here? It's not the end of the world but it's pretty aggravating having a completely useless recovery if I'm not near a computer,.
Try using Flashify or Flashfire.
Sadly didn't work. It doesn't seem to matter how I flash the recovery, the bootloader replaces it with the stock recovery when it boots. I'll update the OP to clarify, but thank you
I am having same issue have you found a fix
Have you tried starting completely over? Like, downloading the official MM build (b331, C564D003) from Huawei (Assuming you're on L24)?
On the new, freshly installed ROM, make sure that USB Debugging is and enable OEM Unlock are on in the developer settings.
Then, try flashing this build of TWRP again.
Before rebooting, do a Cache/Dalvik Wipe.
Boot up into the stock rom, then use 'adb reboot recovery' to see what happens next. It should work...
Hi mate,
It'd be easier to help you if you could post a screenshot of your FASTBOOT screen. There will be a line that will say FRP=LOCKED/UNLOCKED something like this.
if it is locked,
you have to install stock rom & enable OEM unlock from setting.
Then relock the boot loader. Then again unlock the boot loader.
For myself, I unlocked my BL unofficially, & this problem occurred . I solved it this way...
Hope it helps.
Cheers!
Hello! This is my first thread on the forum;
I'm writing because I think I soft bricked my Xiaomi Mi Pad 4 LTE, let me explain from the very beginning.
It's a brand new device, bought today, and with a custom italian ROM which was sold with.
I just wanted to root it, and the bootloader was already unlocked because it was a custom ROM, so I tried to install TWRP (mocha version for Mi Pad) with Fastboot and then I wanted to install Magisk.
The issue is that, when I tried to flash TWRP to recovery with fastboot flash recovery twrp.img, it all went "OK" but then TWRP was not actually flashed and couldn't boot it with key combinations, it just looked like it wasn't there. I also tried to boot it without flashing, with fastboot boot twrp.img but it gave me
"Failed to load/authenticate boot image: 00000050" error
Looking on the web, I found someone who told to try fastboot flash boot twrp.img and so, without even thinking, I did it.
That's the main issue. I rebooted, and found that TWRP started, but now I couldn't boot my device anymore, because the default boot.img file was replaced by twrp.img. So, practically, TWRP replaced my device's default system (I think?).
Then, I tried to find a stock firmware for Mi Pad 4 (Clover) on the web, and I found it, so I flashed the stock firmware boot.img, fastboot flash boot boot.img, but when I rebooted, the device was stuck in the loading screen with three dots loading over a "Powered by Android" logo. I waited 20 minutes, nothing, it looks stuck, so this stock boot.img doesn't seem to work.
I can actually flash TWRP and that stock boot image both whenever I want and switch between them; the first works, the latter doesn't.
So, in poor words: I flashed twrp.img as boot.img and now I can't boot normally, but TWRP starts when turning on my device.
But I just want to get my default boot.img or system, or any other way to reaccess to my device. That's fine even if I have to hard reset or wipe everything, it's fine even if I am going to lose data, but please, just help me.
Can someone help me? I'm just a newbie in this world, please help me unbricking my device.
Thanks in advance.
Try installing twrp again and boot to it
Download custom rom.of your choice ( im using hovac and it been great for a year now )
Move it to your mipad via comouter
Format everything in twrp and install the rom and gapps
--- I just remembered havin same issue u having and if im not mistaking : u should reboot to recovery right after installing twrp ( you dont reboot to system )
Im not really sure about it cause it happened long time ago
@DanielVipx
Sorry, seems you tried that already. Did you try the mi flash tool?
This might help:
https://osdn.net/projects/xiaomifirmwareupdater/storage/Stable/V10/clover/