Features from Volt
Main Tweaks:
CPU OC (2112/2592)
CPU Undervolt (uh numbers are on github)
GPU 180mhz step
GPU Undervolt (by -100mv)
Governors
Alucard
Zzmoove
Cultivation
Blu_active
Tripndroid
I/O Schedulers
Maple
Fiops
Sio
Zen
Misc Features
Dynamic Stune Boost
5,75,175mhz underclock on both clusters
WQ power savings
Backlight dimmer
Sound Control
Boeffla Wakelock Blocker
LED control
Fsync Toggle
Westwood TCP
State Notifier
And other mic tweaks under the hood (all on github)
XDA:DevDB Information
Volt, Kernel for the OnePlus 5T
Contributors
Zombie
Source Code: https://github.com/UndeadDeveloper/Volt-OP5/
Kernel Special Features: Overclock
Version Information
Status: Testing
Created 2018-01-11
Last Updated 2018-01-15
Reserved
First, cheers. GOnna try asap
All the best with your kernel, make it a beast
Ayeeeeeeeeee alright, re-opened. Now, Im working blind on this kernel since I only have the 5 and not the 5T. I would enjoy some testers in my telegram group. Heres the link https://t.me/joinchat/FxSOb0RXgohqVWCKPHha5w
As for people who dont want to join the group and be testers, can you test this real quick and tell me if it boots? https://www.androidfilehost.com/?fid=817906626617958383
Doesnt have any features other than overclock and undervolt, im just seeing if it boots
Zombie said:
Ayeeeeeeeeee alright, re-opened. Now, Im working blind on this kernel since I only have the 5 and not the 5T. I would enjoy some testers in my telegram group. Heres the link https://t.me/joinchat/FxSOb0RXgohqVWCKPHha5w
As for people who dont want to join the group and be testers, can you test this real quick and tell me if it boots? https://www.androidfilehost.com/?fid=817906626617958383
Doesnt have any features other than overclock and undervolt, im just seeing if it boots
Click to expand...
Click to collapse
Well she boots!! I'm 3 min into testing but it looks and feels good. OC frequencies look to stick!! Will continue testing but looks like a winner on OB1 rooted with Magisk 15.3. Nice job Dev!!
Ideas4ya said:
Well she boots!! I'm 3 min into testing but it looks and feels good. OC frequencies look to stick!! Will continue testing but looks like a winner on OB1 rooted with Magisk 15.3. Nice job Dev!!
Click to expand...
Click to collapse
After more testing I've noticed the following things...
1) The offscreen gestures may need to be looked at because drawing a V to enable my flashlight didn't work
2) Battery life seems to be substantially less. In 1 hr I lost 7% during idle drain while I was getting ready for work this morning.
3) Everything else seems good to go (wifi, Bluetooth, LTE, OC, etc) all good
Alright here we go. Added the features and it boots. Enjoy kiddos
Volt V1 Is Out!
Includes most if not all of the features listed in op. Cant really remember haha. Been working on 3 kernels today. One issue is that Alucard governor sticks at high frequencies so I wouldnt use that unless youre on a charger all day
Click this totally safe link to download
Is it compatible with Open Beta 2:
http://www.androidpolice.com/2018/01/16/oneplus-5t-open-beta-2/
SlyUK said:
Is it compatible with Open Beta 2:
http://www.androidpolice.com/2018/01/16/oneplus-5t-open-beta-2/
Click to expand...
Click to collapse
Should work just fine, ill update it later today or tomorrow with ob2 sources when I have the time. Feel free to test it and see if its working right now
V2 IS OUT!!!
Alright V2 is out. If you guys want I might go ahead and make a custom rom kernel too since I have one for the 5.
Update: Updated for latest open beta
Download Here
Zombie said:
V2 IS OUT!!!
Alright V2 is out. If you guys want I might go ahead and make a custom rom kernel too since I have one for the 5.
Update: Updated for latest open beta
Download Here
Click to expand...
Click to collapse
Thank you!
I want a custom rom kernel! !
Zombie said:
V2 IS OUT!!!
Alright V2 is out. If you guys want I might go ahead and make a custom rom kernel too since I have one for the 5.
Update: Updated for latest open beta
Download Here
Click to expand...
Click to collapse
I would greatly appreciate that as I am running DU for weeks now, thanks bud
@Zombie Custom rom Volt kernel would be amazing, if convenient and you have the time to do
I posted this one the 5 forums and so im just going to link it here
https://forum.xda-developers.com/showpost.php?p=76210645&postcount=174
Zombie said:
I posted this one the 5 forums and so im just going to link it here
https://forum.xda-developers.com/showpost.php?p=76210645&postcount=174
Click to expand...
Click to collapse
Will you have an XDA thread for Volt Kernel on the OP 6 forums, if possible.
SlyUK said:
Will you have an XDA thread for Volt Kernel on the OP 6 forums, if possible.
Click to expand...
Click to collapse
Maybe, If I do im not sure how long it will remain active. Right now im just planning on using Singularity, getting overclocking and maybe possibly undervolt working and then ill just publish the commits for everyone to use, theres just a lot going on in life and I don't have the time or energy to maintain a kernel.
Zombie said:
Maybe, If I do im not sure how long it will remain active. Right now im just planning on using Singularity, getting overclocking and maybe possibly undervolt working and then ill just publish the commits for everyone to use, theres just a lot going on in life and I don't have the time or energy to maintain a kernel.
Click to expand...
Click to collapse
Yeah that no problem
Related
AOSP Kernels for HTC's 8x50, 7x30, and 8x60 Devices
Also available for the Motorola Xoom
Tiamat kernels are designed for use on all ROMs that are built from the AOSP source code. This includes ROMs built from MIUI, CyanogenMod, and others.
Tiamat receives no support for use with ROMs based on HTC's Sense - use at your own risk.
Click to expand...
Click to collapse
Tiamat Kernels
You can find full details about Tiamat Kernels at our website. The site is up and running and serves as a more centralized location to get updates, downloads, and changelogs for all Tiamat Kernels. There is no forum or Registration, it’s just a more convenient way to keep things organized as we work to add support for more devices.
Click to expand...
Click to collapse
Support
Join the Tiamat Kernel developers on IRC at irc.freenode.net, #tiamat. Support and questions are generally handled faster there than the forums. You can easily join via webchat here.
Click to expand...
Click to collapse
Special Thanks to:
toastcfh, slayher and the CyanogenMod team for the base kernels and everything else they do for the Android community
bcnice20 for generally being awesome
TeamWin for also generally being awesome
netarchy, chad0989, cuviper, and invisiblek for some great code
intersectRaven and redstar3894 for the Mjolnir compiler
JasonK75 for updating threads
Click to expand...
Click to collapse
Quick Links
Click to expand...
Click to collapse
8x50 Changelog
8x60 Changelog
7x30 Changelog
Downloads
FAQ
Source Code
reserved for later
This kernel has been around for the Inc and the Evo. Now I'm bringing it to the N1 and the Desire!!
Great stuff, always nice to have more kernel choices
MOD : Can you post only Nexus One kernel on your post please (more readable)
Had been having some wifi issues this past week using cm7 nightly along with various kernels. Wifi was frequently dropping or just very slow. Spent most of Sunday screwing with my home network which seems stable now. I think comcast must have been doing something. however, my phone wifi was still poor. installed this kernel last night and so far phone is performing as it should on wifi. the difference was immediate. not sure whats going on. cant comment on battery life yet, but it's looking very good through this mornings use. Thank you!
allofusjw said:
Had been having some wifi issues this past week using cm7 nightly along with various kernels. Wifi was frequently dropping or just very slow. Spent most of Sunday screwing with my home network which seems stable now. I think comcast must have been doing something. however, my phone wifi was still poor. installed this kernel last night and so far phone is performing as it should on wifi. the difference was immediate. not sure whats going on. cant comment on battery life yet, but it's looking very good through this mornings use. Thank you!
Click to expand...
Click to collapse
I'm glad it's working for you, but that is strange... The only change I make to wifi from CM is undervolting it. And now that I think about it, I may have forgotten to bring that tweak over to the n1 and desire...
Can you summarize how your kernel differs from the others (CM, pershoot, wildmonks, redstar).
mr_raider said:
Can you summarize how your kernel differs from the others (CM, pershoot, wildmonks, redstar).
Click to expand...
Click to collapse
Versus the main CM kernel, this has unrestricted overclocking, HAVS, smartass, undervotling, sysfs interface and several other tweaks/improvements. I don't have a N1 and honestly dont know anything about the other kernels out there for it. The kernel started on the Inc and Evo, mostly around MIUI, and I was asked by a few people to bring it over to the N1 and Desire, so I figured I would post it up for everyone.
Hi all,
Been running this since 0800 this morning (its now 1800) no problems at all.
Can't say its faster or better on the battery for sure but its certainly no worse than CM stock.
Whats the smartass govenor? Just the same as on demand as it seems to replace it?
Oh, just one thing, although it has the option (in SetCPU) to go down to 128mhz, I've not seen it go lower than 245mhz which makes me wonder if its clocking down to 128 with the screen off.
Anyone else?
bryanchapman9999 said:
Hi all,
Been running this since 0800 this morning (its now 1800) no problems at all.
Can't say its faster or better on the battery for sure but its certainly no worse than CM stock.
Whats the smartass govenor? Just the same as on demand as it seems to replace it?
Oh, just one thing, although it has the option (in SetCPU) to go down to 128mhz, I've not seen it go lower than 245mhz which makes me wonder if its clocking down to 128 with the screen off.
Anyone else?
Click to expand...
Click to collapse
The on demand governor was removed to force the default to smartass (the default is usually set to on demand by the ramdisk and is not affected by setting the default in the kenrel), but the two are not similar. Smartass was built off the interactive governor.
As for the 128Mhz floor - that is something finicky about the smartass governor. It should drop to 128 on any other governor though.
Smartass Governor shows real potential...thanks for this!
what about the wonk?
From what I gather the wonk is due to something in CM7 kernel. I also noticed that it is absent from stock 2.3.3 and also absent from AOSP builds.
Has anyone tried CM7 with this kernel?
thanks for the N1 kernel.
I'll try ASAP.
I will try this kernel now, thanks for posting. New kernel cooks are always welcomed.
After about 18 hrs on this kernel, the results are pleasing.
Extremely stable on the Smartass Governor, which is surprising because I've had friends compile me kernels incorporating this governor, and the end result = unusable.
Battery life seems fantastic so far.
Clocked 128-998. No profiles.
Thank you again for this kernel.
Results on N1
I have been running this kernel for 24hrs at 128/1228 and it's been running great with smartass selected on my AT&T N1. I tried going even higher than 1228 but that causes it to crash immediately (I'm surprised it can even handle 1228.) Linpack is a little low at 23 compared to other kernels that can get up to 40. Quadrant also comes up behind at only 1051.
tried going at the highest setting & it crashed my N1 , BACK TO RESDTAR'S kernel .
Been using the kernel for a few hours, Kernel seems stable but definatly doesnt feel snappy.
phewizzo said:
Been using the kernel for a few hours, Kernel seems stable but definatly doesnt feel snappy.
Click to expand...
Click to collapse
same here, got some freeze
btw oc at 1267 without any crash
Thread closed.
Thread closed..
Thread closed...
Thread closed...
Thread closed.....
Reserved.
amazing!
will try it on SlimBean rom
thanks mate
SignalX said:
amazing!
will try it on SlimBean rom
thanks mate
Click to expand...
Click to collapse
Just gimme another hour or so, I've a few Linux versions to go to be at 3.0.52
JP.
Hey JP!
Nice to see you made an aosp kernel,bravo!
I was considering trying an aosp based rom but i was wondering...
Are there any bugs or anything that's not working on aosp roms compared to sammy ones?
The last thing i remember that was an issue(a long time ago... )
Was that cm10 had memory leak,which now is fixed...
nfsmw_gr said:
Hey JP!
Nice to see you made an aosp kernel,bravo!
I was considering trying an aosp based rom but i was wondering...
Are there any bugs or anything that's not working on aosp roms compared to sammy ones?
The last thing i remember that was an issue(a long time ago... )
Was that cm10 had memory leak,which now is fixed...
Click to expand...
Click to collapse
Well I've been running Paranoid Android 2.54 for one day with stock kernel, and I liked it that much that I decided to "port" my Sammy kernel to CM10, or to be more precise, to add the same mods to a CM10 base as those I added to the Sammy kernel.
I'm test-compiling 3.0.45 right now, next step will be 3.0.52
JP.
Ok, time to shoot, here it is, just readily cooked, be carefull, still hot
Changelog v1.0
Based on CyanogenMod CM10 kernel for i9300 sources (Linux 3.0.31)
updated to kernel.org Linux 3.0.52
using Paranoid Android 2.54 ramdisk
swap support
/proc/config.gz support
optimized for size
Aroma installer with options
USB Forced Fast Charge v1.2a (Yank555.lu)
CPU OC up to 1.6GHz (Yank555.lu)
Triangle Away support (Chainfire)
Dynamic fsync control (faux123)
TCP westwood congest ctrl (faux123)
Proport. Rate Reduction TCP (faux123)
ARM AES/SHA1 (faux123)
JIT compiler for packet filters(faux123)
fix ipv6 protocol lookup (faux123)
ipv4 check ret.val. dst_alloc (faux123)
ipv6 check ret.val. dst_alloc (faux123)
updated LZO compression (faux123)
do_fsync() to fget_light() (faux123)
reduce mali utilization sampling timeout (AndreiLux)
mdnie: custom settings (AndreiLux)
Includes hardcore sharpnes fixes, and black gamma curve adjustment for black crush
ntfs (rw) support (kernel support only)
zram support (Android optimized)
Download link (MD5 fd4bbc970ef350621a8a3ed9c8003e8c)
Please do consider this v1.0 as beta, I've started working on this CM10 kernel this evening, and it's just done compiling, so you're testing this with me
Yank555 said:
Well I've been running Paranoid Android 2.54 for one day with stock kernel, and I liked it that much that I decided to "port" my Sammy kernel to CM10, or to be more precise, to add the same mods to a CM10 base as those I added to the Sammy kernel.
I'm test-compiling 3.0.45 right now, next step will be 3.0.52
JP.
Click to expand...
Click to collapse
I see...
Looking good!
Is anything not working or have bugs mate? (on the aosp side i mean not on your kernel)
I think you get that some want to have some info before flashing things on their phones.
nfsmw_gr said:
I see...
Looking good!
Is anything not working or have bugs mate? (on the aosp side i mean not on your kernel)
I think you get that some want to have some info before flashing things on their phones.
Click to expand...
Click to collapse
Well the base (CM10 stock kernel) behaved perfectly well, today (I've not used it any longer, as I got my second S3 only yesterday )
So far, I'm running v1.0 since I compiled it about 1 hour ago, looking peachy, but well 1 hour is quite a little too short to make any conclusions.
JP.
Yank555 said:
Well the base (CM10 stock kernel) behaved perfectly well, today (I've not used it any longer, as I got my second S3 only yesterday )
So far, I'm running v1.0 since I compiled it about 1 hour ago, looking peachy, but well 1 hour is quite a little too short to make any conclusions.
JP.
Click to expand...
Click to collapse
A second S3, wow. :silly:
I use this kernel with Helly_Bean (CM10) and everything is just fine!
Can I change the voltage settings and the touch-boost level?
Thanks!
BenjaminX2 said:
A second S3, wow. :silly:
I use this kernel with Helly_Bean (CM10) and everything is just fine!
Can I change the voltage settings and the touch-boost level?
Thanks!
Click to expand...
Click to collapse
Voltage control is something I'm not keen on introducing, as it brings close to no battery gain (nothing you could actually really measure) but adds a whole lot of risk of instability, especially users pushing the limits or even slightly above I wouldn't want any flooding with weird random reboot reports due to this
CPU and GPU (governor) behaviour is stock (except for the CPU OC ti 1.6GHz).
JP.
Yank555 said:
Voltage control is something I'm not keen on introducing, as it brings close to no battery gain (nothing you could actually really measure) but adds a whole lot of risk of instability, especially users pushing the limits or even slightly above I wouldn't want any flooding with weird random reboot reports due to this
CPU and GPU (governor) behaviour is stock (except for the CPU OC ti 1.6GHz).
JP.
Click to expand...
Click to collapse
I like to undervolt the CPU 100mV and the GPU 25/50mV. That is stable for me and reduces the temperature of the phone a bit. Most noticeable with the touch boost turned down to 200 MHz.
Let's see if a governor change can help.
BenjaminX2 said:
I like to undervolt the CPU 100mV and the GPU 25/50mV. That is stable for me and reduces the temperature of the phone a bit. Most noticeable with the touch boost turned down to 200 MHz.
Let's see if a governor change can help.
Click to expand...
Click to collapse
Not sure using a different gogernor than pegasusq is going to work well...
UV for temperature might be a good idea, but not for better battery as that doesn't realy make any measurable difference, brings only the risk of instability.
JP.
Sent from my Paranoid Android 2.54 / Yank555.lu CM10 kernel v1.0 (3.0.52) powered Galaxy S3 i9300 using Tapatalk 2
Okay,i switched over from hoxhound to helly bean and i must say this is great!
Your kernel works fine here...
I really really reallyyyy hope you update this kernel like the other one!
nfsmw_gr said:
Okay,i switched over from hoxhound to helly bean and i must say this is great!
Your kernel works fine here...
I really really reallyyyy hope you update this kernel like the other one!
Click to expand...
Click to collapse
Will keep them in line each time I change something that can fit both
Just moved my daily to PA, switched S3, the white one's in my pocket now
So no worries there
JP.
Sent from my custom ARHD 14.0 / Yank555.lu JB kernel v2.5 Aroma (JB-U6 / Linux 3.0.52) powered Galaxy S3 i9300 using Tapatalk 2
Yank555 said:
Will keep them in line each time I change something that can fit both
Just moved my daily to PA, switched S3, the white one's in my pocket now
So no worries there
JP.
Sent from my custom ARHD 14.0 / Yank555.lu JB kernel v2.5 Aroma (JB-U6 / Linux 3.0.52) powered Galaxy S3 i9300 using Tapatalk 2
Click to expand...
Click to collapse
That's great man!Cheers!
Finally after someone pm'd me I looked back into GPU Overclocking.
New thread created issues with old thread OP permissions (people seem to be asking the same questions over and over again all information will be kept in OP & DO READ THE THREAD, repetitive questions will now be ignored)
Benefits:
Smoother UI
Handle 2d & 3d core GPU intensive applications & games
Currently only 2D core has been overclocked working on 3D core OC
2D-core original value - 192mhz OC to 245mhz DONE achieved 25% performance boost grp_2d_clk outputs 245760000hz
3D-core original value - 245mhz OC to 300+mhz WIP hoping to achieve 40-50% performance boost
2D-core OC only Download: Coming soon...
Download Links for other devices coming soon...
Works for all HTC Sense/Cm9/Cm10 kernels (Just ask a kernel developer for your device to implement the source code)
Note: Don't have internet on PC so providing 3 main files that need replaced for 2D-core OC to work
Download link to source code: http://d-h.st/wbH
3D-CORE OC TESTS Download: Coming soon...
Do check under sys/kernel/debug/htc_clock/clks/ look for file with all clocks & look for GRP_clks (Graphics clock)
OK so basically today I've been thinking and I've come to the conclusion that I will release the 2D-core OC patch As Soon As Possible, 3D-core Core OC is NOT Impossible but for now I'll give it a break, I will attempt 3D-core OC If/When I can get a hold of a msm7x30/msm8x55 device, as it will make it much easier for both me & users.
So for now you can enjoy the 50mhz increase/bump up, perf boost 25% in 2D-core (will increase performance in both 2D/3D intensive appications as 2D-core is used for 3D AFAIK and increase User Interface performance (Note: This will not take a hit on battery life)), I will also release a couple of fixes on patchas kernel that shouldnt be there/set etc.
(Theres a device available in my area for roughly £90, if anyone wants to contribute towards getting that device or can donate a device , more than welcome and shoot me a PM so I can list you here.)
(This isnt a promise of 3D-Overclock if you donate, if you donate please do so expecting nothing I will only attempt 3D-overclock)
Working device list - all kernel 3.0+ msm7x30/msm8x55 soc devices.
Main thread is in Desire HD Android Development section: http://forum.xda-developers.com/show....php?t=2368497
Shaky156 said:
Finally after someone pm'd me I looked back into GPU Overclocking.
New thread created issues with old thread OP permissions (people seem to be asking the same questions over and over again all information will be kept in OP & DO READ THE THREAD, repetitive questions will now be ignored)
Benefits:
Smoother UI
Handle 2d & 3d core GPU intensive applications & games
Currently only 2D core has been overclocked working on 3D core OC
2D-core original value - 192mhz OC to 245mhz DONE achieved 25% performance boost grp_2d_clk outputs 245760000hz
3D-core original value - 245mhz OC to 300+mhz WIP hoping to achieve 40-50% performance boost
2D-core OC only Download: Coming soon...
Download Links for other devices coming soon...
Works for all HTC Sense/Cm9/Cm10 kernels (Just ask a kernel developer for your device to implement the source code)
Note: Don't have internet on PC so providing 3 main files that need replaced for 2D-core OC to work
Download link to source code: http://d-h.st/wbH
3D-CORE OC TESTS Download: Coming soon...
Do check under sys/kernel/debug/htc_clock/clks/ look for file with all clocks & look for GRP_clks (Graphics clock)
Click to expand...
Click to collapse
Don't over clock The GPU On MSM7X30 I over clocked the gpu from 245 to 260 it caused severe battery drain and laggy fps
extremetempz said:
Don't over clock The GPU On MSM7X30 I over clocked the gpu from 245 to 260 it caused severe battery drain and laggy fps
Click to expand...
Click to collapse
Sorry but no one has managed to overclock GPU yet (until ive released) modifying kgsl pdata only is NOT overclocking at all itll push the 3dcore back to 192 in sync with axi, please show me the work (source code) and dmesg showing successful overclock including grp_3d_clk outputting overclocked value
Shaky156 said:
Sorry but no one has managed to overclock GPU yet (until ive released) modifying kgsl pdata only is NOT overclocking at all itll push the 3dcore back to 192 in sync with axi, please show me the work (source code) and dmesg showing successful overclock including grp_3d_clk outputting overclocked value
Click to expand...
Click to collapse
I found in the kernel source code arch/arm/mach-msm semc_board_Zeus and i changed the clockspeed from 245MHz to 260 MHz and I have checked the clock speed In root explorer and it seemed to work as I said it makes the device hot,lag and causes battery drain not to mentain the long time effects
Honestly what people say on here I take with a pinch of salt, why? cause people are narrow minded, people said GPU OC is impossible yet I have managed it. I don't won't take your advice based on what you say, show me code/show me evidence then I will believe you. BTW heres some advice takes more than modifying 1 file to GPU OC the 3d-core
Like I said show me evidence then I will believe you
Shaky156 said:
Honestly what people say on here I take with a pinch of salt, why? cause people are narrow minded, people said GPU OC is impossible yet I have managed it. I don't won't take your advice based on what you say, show me code/show me evidence then I will believe you. BTW heres some advice takes more than modifying 1 file to GPU OC the 3d-core
Like I said show me evidence then I will believe you
Click to expand...
Click to collapse
this is an example from dooms github
https://github.com/DooMLoRD/Xperia-...mmit/8ea76470f307426d3f4b0db322708e7f862b474a
extremetempz said:
this is an example from dooms github
https://github.com/DooMLoRD/Xperia-...mmit/8ea76470f307426d3f4b0db322708e7f862b474a
Click to expand...
Click to collapse
Hi, thanks, as I said, it takes more than editing the kernel graphics software layer platform data , that was not overclocking lol!
Wow, great work dev! This is incredibly awesome, especially for us Jellybean users who could use every bump in performance possible. After a lot of hard work, I finally have my 4.1.2 r800x on Paranoid Android at in AnTuTu. I can't wait to see what increases I yield with the 2D overclock and ESPECIALLY the 3D overclock. Please, oh please, try and get 3D overclocking implemented successfully. You will be a god-send to many of us Xperia Play users. While an old device, its purpose built and many of us still use it daily as a phone if not simply for an advanced gaming device. Expect a donation your way soon. I'm not sure if this falls on you or kernel developers but please make sure CDMA users aren't left outside the gate. We miss far too much in what's already a small development scene and I'm afraid this is something we simply cant afford to miss. Thanks again for your hard work. Keep it up!
On a side note, Turbo Kernel is no longer in development. Would you or anyone else be willing to patch these changes and compile the source for us still using the kernel? It's the best kernel I tested that works irregardless of phone or software version.
Shaky156 said:
Hi, thanks, as I said, it takes more than editing the kernel graphics software layer platform data , that was not overclocking lol!
Click to expand...
Click to collapse
it does work because many devs that have included in their kernel have taken it out and if u push your min clock speed to 245MHz its an immediate GPU over clock but.it has many side effects
zefyx said:
Wow, great work dev! This is incredibly awesome, especially for us Jellybean users who could use every bump in performance possible. After a lot of hard work, I finally have my 4.1.2 r800x on Paranoid Android at in AnTuTu. I can't wait to see what increases I yield with the 2D overclock and ESPECIALLY the 3D overclock. Please, oh please, try and get 3D overclocking implemented successfully. You will be a god-send to many of us Xperia Play users. While an old device, its purpose built and many of us still use it daily as a phone if not simply for an advanced gaming device. Expect a donation your way soon. I'm not sure if this falls on you or kernel developers but please make sure CDMA users aren't left outside the gate. We miss far too much in what's already a small development scene and I'm afraid this is something we simply cant afford to miss. Thanks again for your hard work. Keep it up!
On a side note, Turbo Kernel is no longer in development. Would you or anyone else be willing to patch these changes and compile the source for us still using the kernel? It's the best kernel I tested that works irregardless of phone or software version.
Click to expand...
Click to collapse
It falls on kernel developers as I have released the source, GPU OC isn't GSM specific so CDMA users sure will get it .
I usually release kernel before source code but due to my slow PC & Laptop, and I only have net access on the slow laptop I released source code first, cause kernel compiling for me is time consuming, when I do get more time, I sure will pull and compile that kernel for you
extremetempz said:
it does work because many devs that have included in their kernel have taken it out and if u push your min clock speed to 245MHz its an immediate GPU over clock but.it has many side effects
Click to expand...
Click to collapse
hahaha I've requested multiple times evidence and you have failed to provide it, if you believe that was GPU OC please flash that kernel with those changes with debug file system enabled and show me the graphics clocks, if you simply cannot provide evidence I will start reporting your posts as troll posts, thank you
EDIT: I have simply done the job for you
https://github.com/DooMLoRD/Xperia-...mmit/4df2f67a4bc475116cec29fd7abe4d388474b191
take your time to read the comments within that commit
I don't have my play ATM
but if you ask one of the users using my dxengine extreme or fast editions they will be able to provide for you
we havent working 3.x kernel. so this thread is useless.
better if you make this for 2.6.x kernels, and with antutu cpu master's GPU control support.
Nuck-TH said:
we havent working 3.x kernel. so this thread is useless.
better if you make this for 2.6.x kernels, and with antutu cpu master's GPU control support.
Click to expand...
Click to collapse
You dont have a working 3.0?!? Didnt expect that, no problem ill create a kernel patch for k2.x
Its the 2d-core OC only at the moment at 245mhz there isnt any need for GPU control support
"300mhz+ ... " You said. Well you man are awesome if u make that happen! If you need tester or anything i'll test anything with pleasure ! I see you have double thanks than posts so I'm sure you're good so good luck !!
Shaky156 said:
Yeah plus I think I can make it more battery efficient without it affecting performance anywayz whats the codename for xperia play? Test compiling 2.6 turbo kernel
Click to expand...
Click to collapse
R800i is GSM
R800x is CDMA
R800a i don't know
R800at i think is at&t's 4G variant.
Is it zeus? Pheonix? Ayame? Iyokan? Haida? Anzu? Hallon?
Shaky156 said:
Is it zeus? Pheonix? Ayame? Iyokan? Haida? Anzu? Hallon?
Click to expand...
Click to collapse
zeus
MegaRacingHD said:
zeus
Click to expand...
Click to collapse
Cheers, compiling kernel now check the sys/kernel/debug/clk/grp_2d_clk if its running @ 245mhz
Compiling turbo_zeus kernel
https://dl.dropboxusercontent.com/u/58024932/2.6xXplayGPUOC - Copy.zip
devhost was giving issues so i dropboxed it instead
not a flashable zip
included kernel & modules
turbo kernel + 2dcore gpu OC
This is loosely based on CTXz's kernel. I just wanted a little more from it. I'm using it on my "Nook". Hence the name.
So may I present to you.....
Nuki - Kernel
Install:
Just flash this through TWRP recovery. I use 2.8.7.0. It'll do it's own wipes.
It's built for the "Nook" version. But should work for any WiFi only ROM.
My preferred tuner for the kernel is Kernel Audiutor . But others should work also.
Changelog
V1.1 - Ubertec and Linaro toolchains
Enabled KSM and tweaked
init.d support
Selinux permissive
V1
OC to 1344mhz
Intelliplug 3.9
govs added - lionheart, pegasusq, conservativeX, darkness, nightmare.
Shedulers - sio, vr, zen. I haven't been able to get "row" to compile without errors.
Frandom
Lots of tweaks/optimizations
Downloads:
Nuki-V1.1-Linaro
Nuki-V1.1-Uber
Nuki-V1
Stock-OG1-Nook-Kernel
Thanks to
@CTXz
@laufersteppenwolf
@friedrich420
And the ton of other git's I went through to get this.
XDA:DevDB Information
[Kernel] Nuki-Stock-T230NU, Kernel for the Samsung Galaxy Tab 4
Contributors
engine95
Source Code: https://github.com/engine95/Degaswifi-CPU-tweaks.git
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2015-10-17
Created 2015-10-17
Last Updated 2015-10-17
reserved
Mine! Will post feedcack! :fingers-crossed:
@engine95 - awesome. Gonna test it out and let you know
Looking good. Confirm working looking the SM-T230NU......should work on SM-T230 as well.
Well done. I hope it works good for you all!
Just a little update.
I'm trying to work on the GPU now, and it's proving very interesting. This GC1000 GPU treats the cores as being separate. Meaning one is for 2d @ 416mhz the other is for [email protected]
It looks like our possible freq's are 533, 624, 702. And maybe one close to 800 according to the specs.
The problem I see happening, is that we'll be locked into whatever freq I build into it. Meaning there isn't a way to change it through a kernel tuner.
So far, I havent had any luck OC'ing either of them. But we'll see what happens.
V1.1 is in OP See read changelog
Still no luck with OC GPU. But theres 2 builds: Linaro and Ubertec toolchains. Let me know which one you like/prefer.
Enjoy
Nice
so what's the point?
new features?
overclocked?
emoboy (Official Name!)
Nice
so what's the point?
new features?
overclocked?
Click to expand...
Click to collapse
I don't know you. So I don't know if this is sarcastic or not. So I'll play this answer in the middle.
Read the change log and look at the git. Almost everything here has been reworked, updated and/or added. Oc is the only thing I haven't touched. Yet.
@engine95 - for me, my tablet runs smoother on the linaro build.
Nice update and thank you.
g_ding84 said:
@engine95 - for me, my tablet runs smoother on the linaro build.
Nice update and thank you.
Click to expand...
Click to collapse
Thanks
On my past kernels, Ubertec seems to usually run faster. While Linaro runs smoother. But on this tab, it's harder to tell. So Thanks for letting me know. :good:
I am impressed with a lot of the optimizations that "Sammy" has already build into this. Source code I'm used to changing is already in it. And this thing sleeps like a baby.
It's too bad Marvell/Vivante/Sammy has throttled this CPU/GPU so much according to the specs. I mean, for a low-end setup it could be a lot better. But then, it would probably lose battery.
I'm not going to add anymore "stuffs" to it, as I think we have a good selection now. What is in it should satisfy " battery thru performance" depending on the settings people choose.
I haven't even looked a OC CPU yet. All I've tried so far is GPU and that hasn't gone well.
These will be the next things I'll work on. Unless......"SQUIRREL!"
forgive my ignorance, normally i would use the googles and xdas to educate myself before asking such a question, however, I have basically given up on this tablet.....so does your development of this kernel bring the tab 4 7" owners any close to getting an aosp build, this tablet is useless running TW?
edit: upon review, my post was thankless but i am very thankful for you doing what you do for this tablet, it so needs the attention!
gammaxgoblin said:
forgive my ignorance, normally i would use the googles and xdas to educate myself before asking such a question, however, I have basically given up on this tablet.....so does your development of this kernel bring the tab 4 7" owners any close to getting an aosp build, this tablet is useless running TW?
edit: upon review, my post was thankless but i am very thankful for you doing what you do for this tablet, it so needs the attention!
Click to expand...
Click to collapse
Its all good. No worries.
Unfortunately, no. It just improves on stock.
Im new to Samsung, so its all a new learning curve for me. I am kinda shocked at how "low-end " this is for a mainstream tablet. I'd have thought it would be.....better.
T-230 with nuki v1.1 linaro. Working amazingly. Thank you much.
Thank you for this kernel! I've never even thought to use another kernel for this low-end device.
Mine was originally the Nook version as well but I have flashed the latest non-nook firmware and heavily modded it.
I'm using the Linaro version. Xposed is running with a few modules. tuning with Kernel Audiutor.
The device it running very well. smoother than normal. It's a bit warmer too. but we'll see about that though.
Uber variant. Makes a huge difference. Thank you!!!
Still using the linaro. I can't seem to make either of the CPU frequencies stop being max. (1344)
Any suggestions? I'll end up trying the Uber kernel in a moment.
brossovitch said:
Still using the linaro. I can't seem to make either of the CPU frequencies stop being max. (1344)
Any suggestions? I'll end up trying the Uber kernel in a moment.
Click to expand...
Click to collapse
When you reboot, you'll need to set min, manually. I don't know why.
Or, try a different gov. Lionheart and conservativex are my preference.
You may need to remove the set on boot option, then reenable it.
It shouldn't be sticking like that
Mhh, that all sounds very interesting. Possible I can test it this weekend.
CTXz kernel is my first choice all that last year, so I can test it against yours. Don't get me wrong it will be very interesting to see what's different.
Not to see what is better, I wish to see the difference. Every ROM has his specific use and modifications. So it is the science guy who wish to know it .
Will report later about it and CTXz I will be every time a fan of your work .
B14CKB1RD
Kernel for the Motorola Nexus 6
B14CKB1RD Kernel is made with stability and suitability for what uses you want from your phone. I like a happy medium of minimal and just the right amount of features added in as to not be overbloated. As usual happy flashing. Just note i am not responsible if you the user messes up your phone. I will always be around to help in any way i can so if any issues arise please feel free to send me a pm. ABSOLUTELY NO TROLLING, BASHING, OR ARGUING on the post please. Actions will be taken and you will loose my personal support.
Feel Free to Join us on our public Telegram Chat B14CKB1RD Kernel Nexus 6 Users
https://t.me/B14CKB1RDN6
Note: This kernel is Permissive by default but does allow Enforcing. Also this is NOT force encrypted
Downloads:
For Latest Nougat build:
Download Here
Click to expand...
Click to collapse
For Last Marshmallow build:
Download Here For Upstream Version
Download Here For 3.10.40 Version
Click to expand...
Click to collapse
How to Install:
Boot to recovery
Wipe Cache
Wipe Dalvik/ART Cache
Flash Kernel .zip
Reboot to profit
Click to expand...
Click to collapse
Features:
Governors:
Barry_Allen
Chill
Conservative
Dancedance
Darkness
Interactive
Nightmare
Ondemand
Performance
ZZMoove
I/O Schedulers:
Bfq
Cfq
Deadline
Fiops
Maple
Noop
SioPlus
Zen
TCP Congestion Controls:
Bic
Cubic
Highspeed
Htcp
Hybla
Illinois
Lp
Reno
Scalable
Sociopath
Vegas
Veno
Westwood
Yeah
Other:
Built using B14CKB1RD AnyKernel made by Snuzzo
Updated to latest August mr1.6 Google patches
Linux Kernel 3.10.107
Built with gcc 8.0 toolchain self compiled from GNU/Linaro
KEXEC MultiRom Support
CPU UnderClock
Adreno Idler
CPU OverClock
GPU UnderClock
GPU OverClock
Simple GPU Algorithm
Adreno Idler
Input CPU Boost
AutoSMP Hotplug
Mako Hotplug
State Helper
UnderVoltage Control
CFS Scheduler Policy
LZ4 Compressor/Decompressor
F2FS Support
ExFAT Support
Flar2 Wake Gestures
Franco High Performance Audio
Franco Sound Control
Battery Optimizations
Enhanced Power Efficiency
Fast Charge
Wakelock Controls
Adaptive Low Memory Killer
Power Suspend Mode
State Notifier Mode
Kernel Mode Neon
Asynchronous FSync
Dynamic FSync
Updated LED Blink support
Backport and Updates of LED qpnp driver from Nexus 6P
And many more..
Notes::
For maximum stability. Before I flash each update of my kernel, I go to settings>apps>Kernel-AduitorMod>storage and wipe the cache and data for it for a fresh new setup. I do this because when and if i do add or remove a feature you set on boot and its not there. it may cause conflict.
Starting with Version 1.9. The current rom you're on must have the latest google security patches as of august 2016 in order for wifi to work properly.
If you come across a bug or issue please do not spam the thread. either pm me or reach me on hangouts or g+ by [email protected]
Grab the kernel adiutor i use from here
Grab the version of Viper4Android i use from here
Source:
click here
Frequently Asked Questions:
Q: What is the difference between Upstream and the 3.10.40 version?
A: Upstream (currently 3.10.107) has the latest kernel patches from the Linux kernel upstream updates from kernel.org where as the 3.10.40 is where Google has left the kernel at stock for the n6. Basically it's just updates from Linux Mainline that have fixed issues found in their code. For those that also don't know, Android is a mobile form of Linux and uses the Linux kernel.
Click to expand...
Click to collapse
Q: Whats your current setup using the modded kernel aduitor from yoinx?
A: Darkness governor
CPU Min Frequency is at 300mhz
CPU Max Frequency is at 2496mhz
GPU max frequency is at 600mhz
Hotplug is set to AutoSMP with 4 Max cores online and 2 Min cores online
Screen Color Profile is set to Deep Black Colorful
Sounds Volume Gain is set to 4
DoubleTap2Wake is set to Fullscreen
Vibration is set to 50%
TCP is set to Sociopath
Everything else i leave AS IS.
Click to expand...
Click to collapse
Credits & Thanks
@Snuzzo (for teaching me all he knows about kernel and his code used on many devices)
@hellsgod (for his support, code, and friendship)
@frap129 (for his specially made 6.3.1 toolchain)
@apophis9283 (For his friendship, help and contributions to android)
@xanaxdroid (for his toolchains)
@buckmarble (for his code and contributions)
@Xileforce (for his code and contributions)
@franciscofranco (for his code, contributions and audio tweaks)
@faux123 (for many of his awesome kernel contributions and code)
@flar2 (for Gesture Wake Controls and)
@savoca (for his work and code such as kcal control)
@DespairFactor (for his code and contributions)
@DragonHunt3r (for his code and contributions)
@alucard_24 (for his code and contributions)
@bbedward (for zen decision and his code and contributions)
@Yoinx (for his awesome work on kernel adiutor and general help)
@RenderBroken (For his code, contributions and his friendship)
AOSP for having all this a possibility with open source
All Other Developers who make android a great hobby to enjoy
All of my testers and users thank you for keeping me going.
To any other devs i missed...all your work is very much appreciated. if you feel i should put you on the list let me know via pm and ill gladly do so
Get while it's hot folks.. This one is a beast
Which apps for control kernel synapse ?
cool.boy said:
Which apps for control kernel synapse ?
Click to expand...
Click to collapse
I use kernel aduitor
cool.boy said:
Which apps for control kernel synapse ?
Click to expand...
Click to collapse
Definitely kernel auditor. Much nicer ui, and easier over all
Sent from my Nexus 6 using XDA
---------- Post added at 01:07 AM ---------- Previous post was at 01:06 AM ----------
Mmmmm faux sound control. Tasty. Any chance of your personal settings?
Sent from my Nexus 6 using XDA
Nice!
Welcome back to the fold! Can't wait to try this out.
not balanced said:
Welcome back to the fold! Can't wait to try this out.
Click to expand...
Click to collapse
Glad to be back...and trust me I'm not done yet lol
REV3NT3CH said:
Glad to be back...and trust me I'm not done yet lol
Click to expand...
Click to collapse
Excuse me sir,but i have to ask..
What is different from other kernels,your kernel?
have you done any development for this particular phone?
or just a basic kernel?
im telling you this because i cant find a kernel or a ROM with real development A.K.A coding.
i see that most roms just have features like advanced reboot and framework stuff.
and about kernels i see a lot of overhead,so many choices about tcp congestion, i/o schedulers, cpu governors and stuff,without even explaining what a particular governor has different from the other or tcp congestion choices...
Sorry if this is insulting,will delete asap if you are insulted.
Cheers! :highfive:
The Funky Pear said:
Excuse me sir,but i have to ask..
What is different from other kernels,your kernel?
have you done any development for this particular phone?
or just a basic kernel?
im telling you this because i cant find a kernel or a ROM with real development A.K.A coding.
i see that most roms just have features like advanced reboot and framework stuff.
and about kernels i see a lot of overhead,so many choices about tcp congestion, i/o schedulers, cpu governors and stuff,without even explaining what a particular governor has different from the other or tcp congestion choices...
Sorry if this is insulting,will delete asap if you are insulted.
Cheers! :highfive:
Click to expand...
Click to collapse
Actually there is a whole thread floating around on XDA that explains each governor and what makes them unique as well as I/O Schedulers and TCP controls. Ive put together this kernel with what I feel has the right amount of features needed without over bloating it with them like some and having more than the average minimalist style kernels. Also the more a kernel is overbloated the more chance of bugs you will have as well as it bogging down the overall speed. I do plan on putting some more originality to it like my own governor I'm working on as well as a few other features ive had planned for the future. The biggest thing is stability first and I try to achieve that as much as humanly possible while still getting the best speed, battery life and user experience possible. So whilst currently it has what others have seen here and there ive also spent days finding that right sweetspot of what's been needed to achieve that in the huge world of open source and not just including what's specific to nexus 6 only. I did have a ROM out at one point back in lollipop but has not been around since...that did have originality to it. And will again possibly in the future. Ive worked on and maintained for a few separate devices in the past and was more well known for those older devices. Sad to say besides those few ROM builds I posted last year. Ive been absent in the public scene for about a year total lol. I needed that absense and hiatus away from here for quite a few reasons. I'm one of those ones that's chill and not a "insert bad word here" haha. To simply put it Android is a very fun hobby when no drama is around. And I enjoy sharing my hobby
Sent from my Nexus 6 using Tapatalk
hi,
Can i also ask something?
Are the default settings good for daily use? I just want to flash, that's all.
Droidphilev said:
hi,
Can i also ask something?
Are the default settings good for daily use? I just want to flash, that's all.
Click to expand...
Click to collapse
Sure. I further tweak it with what's available for best use for how I use my phone. I'll also gladly share how I have it set up personally
REV3NT3CH said:
Sure. I further tweak it with what's available for best use for how I use my phone. I'll also gladly share how I have it set up personally
Click to expand...
Click to collapse
Why not? Will follow your settings then
Droidphilev said:
Why not? Will follow your settings then
Click to expand...
Click to collapse
It'll be a bit gotta get the kid on the bus and get some breakfast
REV3NT3CH said:
Actually there is a whole thread floating around on XDA that explains each governor and what makes them unique as well as I/O Schedulers and TCP controls. Ive put together this kernel with what I feel has the right amount of features needed without over bloating it with them like some and having more than the average minimalist style kernels. Also the more a kernel is overbloated the more chance of bugs you will have as well as it bogging down the overall speed. I do plan on putting some more originality to it like my own governor I'm working on as well as a few other features ive had planned for the future. The biggest thing is stability first and I try to achieve that as much as humanly possible while still getting the best speed, battery life and user experience possible. So whilst currently it has what others have seen here and there ive also spent days finding that right sweetspot of what's been needed to achieve that in the huge world of open source and not just including what's specific to nexus 6 only. I did have a ROM out at one point back in lollipop but has not been around since...that did have originality to it. And will again possibly in the future. Ive worked on and maintained for a few separate devices in the past and was more well known for those older devices. Sad to say besides those few ROM builds I posted last year. Ive been absent in the public scene for about a year total lol. I needed that absense and hiatus away from here for quite a few reasons. I'm one of those ones that's chill and not a "insert bad word here" haha. To simply put it Android is a very fun hobby when no drama is around. And I enjoy sharing my hobby
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
well said..
First of all,im sorry for my post, i sounded like a ***** who cries for the best rom and kernel..
I dont know very good english,my native languange is Greek and im from the poorest families you can find in Greece. my very first android smartphone was the international Galaxy S3 EXYNOS and since then i found myself very passionate about android,hold this in your mind-EXYNOS.
this phone was my everything ,i used it to even watch tv and movies on the royal navy that i served for 1 year..and i just became very addicted to XDA and the community in general..
That time,HUGE things going on (development and coding wise).
we had some developers that-i dont know why (they had the money to purchase something better)they loved this phone.
in particular JustArchi..
so much dedication for one phone..
he even booted LINUX inside android via a custom app he coded.
so much optimizations
so much care to the community..
it was a blast..
BUT it just seems i cant find this ecosystem and dedication and above all the excitement from developers to do something different instead of just Blisspop ressurection remix blazing fast rom SUperduper fast etc.
it is the originality that bothers me in this phone.
and im so jeallous i cant code by my self because i wanted to be software engineer but i dropped school with good grades to go to work and contribute to income (money) to my family . (my dad is not in family,and i didnt talk or see him in years)
Anyways,to the topic,it would be nice to see something different!
keep it up,dev.
:good:
Droidphilev said:
Why not? Will follow your settings then
Click to expand...
Click to collapse
Take your time. It's just a hobby so...
BTW: the kernel works on stock and CM based?
Droidphilev said:
Take your time. It's just a hobby so...
BTW: the kernel works on stock and CM based?
Click to expand...
Click to collapse
Yes it works on aosp and cm based roms
Sent from my Nexus 6 using Tapatalk
Droidphilev said:
Take your time. It's just a hobby so...
BTW: the kernel works on stock and CM based?
Click to expand...
Click to collapse
I'm using it on CM13 so far it's pretty solid
Awesome good to see your kernel again Rev3nT3ch, always room for a good permissive kernel.
Thanks my friend
Kernel good, mako hotplug cause's app stoppage and bsod's and also only two cores online?
Edit: only if turned on by the way, so kept off everything ok
Sent from my Nexus 6 using Tapatalk