lg g4 - Android Q&A, Help & Troubleshooting

Hello i need help with my LG G4. Am trying to find the offical firmware but i have failed.
The phone model number in the settings says H811, the back sticker under the battery say H811 and when i opened command prompt and send command adb devices it says it is verizon
Before it had lollipop and was working well so i tried to upgrade to 6.0 and thats when issues sarted. After upgrade it works but the sim not detect network is not working imei show 'null' and other lots of features not working
I have tried to install several firmwares using the LGUP but all fail bringing me an error of kdz is invalid.
I have tried the LG Flash Tool and it have failed too.
Can anyone hlep me find the stock firmware for this phone.

What about this rom: http://www.lineageosrom.com/2017/02/official-lineage-os-for-lg-g4-h811.html

Related

Sprint LS990 Model Information Check Failed

I attempted to root my Sprint LG G3 and bricked it. I am attempting to restore it with the following.
LG Flashtool V.1.8.6.527
LGLS990_20140704_LGFLASHv160.dll
LS990ZV4_04.51101.tot
I have tried to restore but it keeps telling me the Model Information Check Failed.
I have seen a post about a Verizion phone with the same problem and was told to swap out the dll file with a differant version and that fixed his problem, I am unable to find an allternitive dll for my LG G3 any help would be appreciated.
Hi
I would advise that you check the model number of your phone on the motherboard.
My phone had D855 written all over it, but when I opened it up, the motherboard was LS990!
It was a refurbished phone
Have you figured out a solution to this? I also have a Sprint G3, a LS990, and am having the same issue when trying to flash a .tot file with LG FlashTool.

[SOLVED] Flashing a KDZ fails on H860 using LGUP and LGFlashTool

Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
This forum is not as useful as it used to be once upon a time. Disappointed.
Try with LG support tool from LG
Please update me with this case. I have twn vrsion also bought from one of the online shop in dubai and i want to flash also the uae kdz. thanks
---------- Post added at 06:49 PM ---------- Previous post was at 06:30 PM ----------
Dr.Alani said:
Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
Click to expand...
Click to collapse
Please try this one:
thebiker said:
I solved the problem. I have just updated all LG file. LG UP, LG Lab, LG 850 DLL. Finally I successfully updated my phone.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g5/help/lg-g5-brick-root-t3411389
Get the updated tools here for H860:
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
medo18 said:
Try with LG support tool from LG
Click to expand...
Click to collapse
Thanks for the suggestion. The LG support tool does not work with my version of LG G5 (I am not sure if it works with any G5 at all), it says that I need to use LG Bridge instead because LG Support Tools does not support my phone.
However, I tried the "Recovery" option in LG bridge, but it checks the IMEI and decides that my phone needs the latest Taiwan rom instead of what I want (which is UAE).
engineer000 said:
Please update me with this case. I have twn vrsion also bought from one of the online shop in dubai and i want to flash also the uae kdz. thanks
---------- Post added at 06:49 PM ---------- Previous post was at 06:30 PM ----------
Please try this one:
http://forum.xda-developers.com/lg-g5/help/lg-g5-brick-root-t3411389
Get the updated tools here for H860:
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
Click to expand...
Click to collapse
I already got the the newest version of LG UP. The phone is recognized, but it does not proceed with the upgrade properly.
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
Where did you bought yours? I bought from Yallashop.
Where are you seeing that error? As your phone startup? How about using the proper DLL on the guide and flash it again?
it seems to be related to different customizations. i don't know if flashing tW version will stop it. but this stopped me from flashing a AE fw
engineer000 said:
Where did you bought yours? I bought from Yallashop.
Where are you seeing that error? As your phone startup? How about using the proper DLL on the guide and flash it again?
it seems to be related to different customizations. i don't know if flashing tW version will stop it. but this stopped me from flashing a AE fw
Click to expand...
Click to collapse
I got mine from souq.com.
The error shows only at phone startup. Its not causing any other visible problem.
I couldn't get the H860 DLL msi anywhere on the web.
Sent from my LG-H860 using XDA-Developers mobile app
Dr.Alani said:
I got mine from souq.com.
The error shows only at phone startup. Its not causing any other visible problem.
I couldn't get the H860 DLL msi anywhere on the web.
Sent from my LG-H860 using XDA-Developers mobile app
Click to expand...
Click to collapse
Try it here:
Get the updated tools here for H860:
http://www.mylgphones.com/download-l...g-g5-h860.html
engineer000 said:
Try it here:
Get the updated tools here for H860:
http://www.mylgphones.com/download-l...g-g5-h860.html
Click to expand...
Click to collapse
I think the link is broken.
Dr.Alani said:
I think the link is broken.
Click to expand...
Click to collapse
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
http://www.mylgphones.com/download-lg-flash-files-dll-for-lg-g5.html
sorry it is broken :/
try this:
http://downloads.codefi.re/autoprime/LG/LG_G5/LGFlash/LGH860_20160316_LGFLASHv216.dll
http://downloads.codefi.re/autoprime/LG/LG_G5
Dr.Alani said:
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
You can eliminate the error by reflash the phone with LG bridge (can download officially from LG). In "Software update" tab, there's "Update error recovery" which will automatically download the official firmware for your G5 and of course, the annoying startup error message will go away.
ted presley said:
You can eliminate the error by reflash the phone with LG bridge (can download officially from LG). In "Software update" tab, there's "Update error recovery" which will automatically download the official firmware for your G5 and of course, the annoying startup error message will go away.
Click to expand...
Click to collapse
I am afraid that it might download the software based on the IMEI and then my phone will be back to Taiwan software instead of the AME currently installed.
Sent from my LG-H860 using XDA-Developers mobile app
Can you please write a detailed tutorial of how to flash a kdz on H860 variant? I have the same error and I can't find a way how to solve this. So many informations and nothing works. Thank you very much.
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
After this update is possible to root the H860?
Not working for me
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
I installed required latest drivers.
I did exactly same procedure as mentioned above, but not working for me.
Although it recognizes my device. (attached pic 1).
But when i try to select it gives error. (attached pic 2).
I also followed the procedure in last post by "BaBaK SpY" in following link
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
But same result as above.
I face the same problem as u did
Dr.Alani said:
Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
Click to expand...
Click to collapse
pLEASE Help me i face the same problem u did . i Tried evry method n facing the same problem :crying::crying::crying::crying:
---------- Post added at 12:13 PM ---------- Previous post was at 11:19 AM ----------
QSR1 said:
I installed required latest drivers.
I did exactly same procedure as mentioned above, but not working for me.
Although it recognizes my device. (attached pic 1).
But when i try to select it gives error. (attached pic 2).
I also followed the procedure in last post by "BaBaK SpY" in following link
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
But same result as above.
Click to expand...
Click to collapse
my lgup says cannot load my h860 model
. i have h860 and update it with v20a hongkong rom. every thing is good only fast charge disppointing me and take alot of time to charge about 1.30hour to fully charge. i update via lgup and usb .
anybody face to this problem ?
any way or recommend to solve it?
i will attach the graph of battery charge in android 6 and android 7.
slope of line in android 6 battery charge is much higher than 7 .
---------- Post added at 05:02 PM ---------- Previous post was at 04:46 PM ----------
graph of battery charging in android 6 vrs android 7 in my lg h860.
http://s2.picofile.com/file/82827979...7_09_23_58.png
http://s3.picofile.com/file/82827982...6_22_30_00.png
android 7 charging speed very bad and is slow. and its clear in pictures.
why the reason???

LG L65 D280n no IMEI no baseband

Hello,
I'm here trying to get help to solve a LG L65 D280n with the null IMEI problem.
I'm hopping there's no problem with the hardware as it was working ok and didn't fall or something else. It just got that way and it was nw unlocked some months ago.
Well, I've 1srt search and follow many youtube videos and read a lot of threads.
At 1srt I've tried to use official software form LG. LG mobile tool and drivers.
I download and install them everything goes well, phone is detected and after usb connection the firmware download started.
Problem was, after the point that it decompress the firmware and it was supposed to start copying it to the phone, the LG app just hangs with the windows error as it stops responding.
Using a machine with Win7 Pro x64.
From this saved the LG kdz file and the dll file that was downloaded.
I can't get another because the links from:
http://redirect.viglink.com/?format...g-phone-firmware.com/firmwar...-Tutti-50.html
are broken to the Europe/Portuguese version A or B of this phone that was original from MEO/TMN
Then I've tried another LG tool, older I believe. It requires qualcomm software, visual c++ etc.
All went well until I've selected a com port at the QPST configuration and then at the RF NV manager were I would try to write the IMEI it fails.
I select the COM port I've added before at the QPST configuration app but when I select the READ from phone option it just returns error ... DM command 19-24.
I was hopping to flash the modem only or to write the IMEI manually but its getting hard to solve the communication problem even after trying in different computer and with 3 version of drivers and software.
Recovery mode only shows if I wanna do factory reset, I did.
Can someone help?
Tried also EFS Professional now using Qualcomm NV tools, I can select the phone COM port but if I try to connect to it with 000000 Send SPC option on, It returns error, unable to send SPC to the phone.

Lg g5 h860 kdz flash help !!

LG G5 H860 INDIAN VERSION RUNNING ON V10F-IND-XX
Phone says uptodated software but lg bridge shows v10k update which is volte update !!
service centres doesnt have v10k update yet in hyderabad .
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I HAVE A V10K KDZ I WANT TO UPGRADE TO IT !! TRIED EVRY POSSIBLE WAY COULDNOT SUCCEED !! Please Someone Help me !!

F700l model to F700k

Hello everyone, I'm residing in Korea by the moment... my carrier is olleh (KT)... I used to have an LG G pro 2 from the carrier so had no problem at all. recently I switched to a new G5. the problem now it's the model is F700L (from other carrier) and there are some benefits I get with my carrier (KT) that I can't when the phone doesn't match the same carrier ...
I've been reading and researching about changing the rom to the one from the other carrier, and LGUP throws error when saying: Error F700L > F700K ... I know there won't be any problem doing this because the hardware is the same. And as far as I know there's no possible way to root the phone and unlock the bootloader or install a custom one for later on install the other rom from there... :silly::crying::crying: .... so....
after so many days trying got disappointed and annoyed... gotta ask... is there any other way to flash without confirmation? (with Odin or other?... FlashTools doesn't get to communicate with the device in download mode... and LG Flash.. requires a DLL and can't find it anywhere...) ... or getting inside the phone using ssh (i'm linux user) or other with the help of the adb ... and get to edit the model just to change the freaking L by a K??
The other possible way could be editing the actual KDZ to match the info... I've tried WinHex but LGUP says: Invalid KDZ after the edition.... some other way?
will appreciate any idea... thanks!

Categories

Resources