Greetings Everyone,
First, as a newbie to this site, thanks for all the great assistance. Two suggestions to other newbies, if I may be so bold.
1) Recovery Mode - In literally hours of searching, I couldn't figure out why my S3 wouldn't go into recovery when pushing Volume Up, Home, and Power keys. Finally, I found one post that suggested I push the Volume Up and Home Keys first, then press the Power Key. This has worked consistently ever since. Don't know if it's a quirk specifically to the S3, but it certainly empowered me.
2) Download Mode Soft Brick Bootloop - My S3 was soft-bricked with a bootloop in Download mode. I searched for hours for a solution. Finally, one post said I simply had to use Odin to give it something to Download, which would subsequently release it from its bootloop. When I did this, the progress bar magically appeared, the file transferred, and when it was done, my phone was no longer stuck. Problem solved.
Since these two fixes worked for me, but were so hard to find, I thought I'd post them again, in case someone else gets stuck in the same hell I was. Literally spent a day on these two issues alone.
Thanks again to all. I surely would have been stuck in many other states of confusion if it wasn't for this wonderful forum. Best to all.
It's nice to see a post where the user has used their noggin and fixed it by trial and error!.
Well done and thanks for posting!.
shivadow said:
It's nice to see a post where the user has used their noggin and fixed it by trial and error!.
Well done and thanks for posting!.
Click to expand...
Click to collapse
Thanks. )
Related
Everything was great.. did the update rebooted gtab worked great. Has always been stock. I shut it down and when I got home from work i hit the power button and I get the viewsonic birds then the tap n tap logo then the n just stays there and that is it has been stuck on the n for hours. I turn it off and back on and the same thing. Any advice would be appreciated.
Thank you
Have the same problem on stock Gtab.Mine gets to the birds and sticks.Tried holding power and volume up at the same time, but won't reset.Can't discharge the battery because it still goes into sleep mode after 10 min.Computer won't read when plugged into USB.Bought on Woot so a return will be a major p.i.t.a. I am new to Android devices
and was just getting enough balls to try rooting and flashing!!! FML
Yea bought mine from woot also... I liked the stock rom was also afraid to try to load a new rom. Looks like I will be sending it back
hvideo1 and sepder,
You have a choice to make. What both of you have is called a "boot loop".
Sometimes they happen because somebody does something wrong -- and
sometimes like in your case they just seem to happen.
You can return them if that is your desire -- or you can try to fix them.
Usually if one partitions the tablet and cleans it up, it can be fixed. But
that means you have to do some quick learning.
First, you have to get back to a fully stock, hopefully working version. Look
at the following procedure -- which we wrote hoping everyone would be able
to understand and use:
http://forum.xda-developers.com/showthread.php?t=861950
If you complete this procedure and the reflashed stock version works, then
we can load a program called CWM and do the partitioning and cleaning. If
the boot loops persist, then a second choice is to nvflash CWM and use it
to partition/clean up.
http://forum.xda-developers.com/showthread.php?t=865245
http://forum.xda-developers.com/showthread.php?t=1030042
The threads above give you more info on the various procedures.
Post back here what you decide to do or if you have questions.
Rev
I would try a simple data wipe first. Much easier and less invasive.
http://forum.xda-developers.com/showthread.php?t=1030915
Thanks for the replies. I don't want to send my gtab back so I'm reading both post and going to see what happens. I will reply back (hopefully with the gtab) Thanks again
I'm in the same boat as hvideo1 and sepde
Already tried the nvFlash first method mentioned by butchconner but can't get past the "Booting recovery kernel image" message, just sits there on the viewsonic splash.
Going to read and try the "CWM and do the partitioning and cleaning" next.
Appreciate everyone's help!
lrgche,
To NVFlash, you have to press Power/Volume - to activate APX. It will usually come
up with the white screen and then turn black.
"Booting recovery kernel image" indicates you may be pressing Power/Volume + , which
starts up Recovery -- a different process.
Go back through the procedure again and double check that everything is right and
it should work.
Rev
K J Rad said:
I would try a simple data wipe first. Much easier and less invasive.
http://forum.xda-developers.com/showthread.php?t=1030915
Click to expand...
Click to collapse
This worked for me. Thank you back up and working. the only reason I didn't go the other way was because I didn't understand alot of reading and just confused me (not hard to do)
Lol. Thanks to both of u
hvideo1 said:
This worked for me. Thank you back up and working. the only reason I didn't go the other way was because I didn't understand alot of reading and just confused me (not hard to do)
Lol. Thanks to both of u
Click to expand...
Click to collapse
Glad to help. You should learn that other procedure if you plan on doing any serious modding in the future though. It may become necessary next time.
Hey everybody. I am sure this issue has happened before and there is probably a current post about this exact problem but I wasn't able to find anything. I attempted to install ClockworkMod and something happened. I hit a wrong button or something. Now whenever I try to boot into cwm the boot screen just hangs there and booting recovery kernel image is the only thing that displays with the dumb parrots.
Any ideas what I should do? Thanks in advance!
If you cannot get to CWM by hitting the power AND + button, then I suspect your next step will be to try the NVflash method as described on GoodIntentions (his username) site called "G Tablet for Dummies". Google it and it's one of the first (if not first) results.
It might look intimidating at first (at least for me), but following it step by step turns out to be pretty easy.
joseph.fox said:
It might look intimidating at first (at least for me), but following it step by step turns out to be pretty easy.
Click to expand...
Click to collapse
It was actually super easy to do and it fixed the issue. The issue was bootloader 1.2 after I did some research, I figured out that my G-tab (after getting RMA'd) came back with the newest TnT and that's what the issue was. Thanks a ton for the info and I appreciate the response!
Sorry I was in a similar issue but was not reading properly. My bad
Well, I have a d2pad SN 201301 on the back so its somewhat new
It uses rk2829 rockchip.
Anyways Ive been trying to get recovery on it for the past couple hours to use a new rom, finally got recovery working, did everything installed my rom, and let it restart.
Well, The rom isnt compatible, there was a later version a few pages into the thread that might have been, but the one I got wasnt.
So now I'm stuck, at the intro d2 logo
I only have 1 button and it is power.
Ive tried to get adb working, because it at least says its connected, but with no success anyone have any ideas?
wzzupp548 said:
Well, I have a d2pad SN 201301 on the back so its somewhat new
It uses rk2829 rockchip.
Anyways Ive been trying to get recovery on it for the past couple hours to use a new rom, finally got recovery working, did everything installed my rom, and let it restart.
Well, The rom isnt compatible, there was a later version a few pages into the thread that might have been, but the one I got wasnt.
So now I'm stuck, at the intro d2 logo
I only have 1 button and it is power.
Ive tried to get adb working, because it at least says its connected, but with no success anyone have any ideas?
Click to expand...
Click to collapse
Hey, I realize that it's been a couple years since you posted this question. I never saw any responses. So how did it all end?
Also, there was one critical piece of information you failed to share with the XDA community...you said you worked on getting into recovery with a device that only had a power button and no volume buttons. May I ask how on earth you managed to get into recovery using only a power button? Reason I ask is that I am now facing this situation. NTech Alexis RX3HD8 tablet, rockchip RK2928 processor, power button and no volume buttons! I need to get into recovery but I cannot turn on USB debugging (and the tablet is pattern locked but the pattern was entered too many times....so I am locked out).
At this point, if I cannot enter recovery mode, the tablet is a permanently soft-bricked which is, for all intents and purposes, the same as a hard-brick.
I think what happened for me was, wanted to install new rom, got into recovery to install it, then it bricked my tab, after that I was at the logo
in my case i fixed everything by getting a rkflasher, to reinstall it, and contacting support for the factory image, which is lucky they new something about it, some companies abandon support, or dont know enoguh about what they sell, lol
as for your situation
these are the things i'd try
1. If it has google play, and is connected wifi even if its locked you can try this page
https://www.google.com/android/devicemanager
and then pick ur device and factory reset it is an option (although ive never tried it)
2. search around on the internet for 1 button recovery methods, I've seen quite a few weird tablets, and some I can think of with 1 button recovery
A. a pin hole thats not the reset button or the mic, was an actual button, and that was used to get into recovery with a safety pin, and doing the normal holding it while powering on method
B.. holding the power button, and instead of letting go when u see a logo, keep holding it, till it shuts off again, then power it on
C. plug it in to pc via usb, and turn it on, while its booting, see if ur pc recognizes it at any point during the startup and try to run some commands, ive had a brand of tabs, that give u adb access during boot, but then remove it after finished booting
4. their website is in spanish, and they dont have firmware/manual links available for your tablet
You could contact support for recovery instructions or reflash instructions,, and hope they speak english or you speak Spanish
Most of the time with 1 button tablets, if theirs no info of similar ones online, unless you can contact support, you might be out of luck
PS, my edit:
also, I saw ur post on the youtube video while looking up stuff about this tablet, if that guy can get you a firmware, you have another option of trying to get to download mode too
my tablet, with rk2928 uses these instructions to get it to show up in the RKBatchTool.
https://www.d2pad.info/docs/OSFirmwareInstallInstruction_D2-721.pdf
maybe they can help you get into download mode on urs
all of this being said, I hope my first suggestion will work, IDK if wifi is disabled during pattern lock, or if u can factory reset any tablet, I just know I always see that option when I'm using it to find my devices ect.
CVAngelo said:
Hey, I realize that it's been a couple years since you posted this question. I never saw any responses. So how did it all end?
Also, there was one critical piece of information you failed to share with the XDA community...you said you worked on getting into recovery with a device that only had a power button and no volume buttons. May I ask how on earth you managed to get into recovery using only a power button? Reason I ask is that I am now facing this situation. NTech Alexis RX3HD8 tablet, rockchip RK2928 processor, power button and no volume buttons! I need to get into recovery but I cannot turn on USB debugging (and the tablet is pattern locked but the pattern was entered too many times....so I am locked out).
At this point, if I cannot enter recovery mode, the tablet is a permanently soft-bricked which is, for all intents and purposes, the same as a hard-brick.
Click to expand...
Click to collapse
Without ADB a soft-brick can become permanent state!
wzzupp548 said:
I think what happened for me was, wanted to install new rom, got into recovery to install it, then it bricked my tab, after that I was at the logo
in my case i fixed everything by getting a rkflasher, to reinstall it, and contacting support for the factory image, which is lucky they new something about it, some companies abandon support, or dont know enoguh about what they sell, lol
as for your situation
these are the things i'd try
1. If it has google play, and is connected wifi even if its locked you can try this page
https://www.google.com/android/devicemanager
and then pick ur device and factory reset it is an option (although ive never tried it)
2. search around on the internet for 1 button recovery methods, I've seen quite a few weird tablets, and some I can think of with 1 button recovery
A. a pin hole thats not the reset button or the mic, was an actual button, and that was used to get into recovery with a safety pin, and doing the normal holding it while powering on method
B.. holding the power button, and instead of letting go when u see a logo, keep holding it, till it shuts off again, then power it on
C. plug it in to pc via usb, and turn it on, while its booting, see if ur pc recognizes it at any point during the startup and try to run some commands, ive had a brand of tabs, that give u adb access during boot, but then remove it after finished booting
4. their website is in spanish, and they dont have firmware/manual links available for your tablet
You could contact support for recovery instructions or reflash instructions,, and hope they speak english or you speak Spanish
Most of the time with 1 button tablets, if theirs no info of similar ones online, unless you can contact support, you might be out of luck
PS, my edit:
also, I saw ur post on the youtube video while looking up stuff about this tablet, if that guy can get you a firmware, you have another option of trying to get to download mode too
my tablet, with rk2928 uses these instructions to get it to show up in the RKBatchTool.
https://www.d2pad.info/docs/OSFirmwareInstallInstruction_D2-721.pdf
maybe they can help you get into download mode on urs
all of this being said, I hope my first suggestion will work, IDK if wifi is disabled during pattern lock, or if u can factory reset any tablet, I just know I always see that option when I'm using it to find my devices ect.
Click to expand...
Click to collapse
Hey thanks for getting back to me. You've been extremely helpful and your response may hopefully be found in future by others who have the same problem.
Here's how it's working out for me with this device:
1. It has Google Play but unfortunately the wifi is turned off and there's no way to connect. But in any event, the little kid whose tablet it is (I'm working on the tablet at the request of her father who is my friend), she doesn't remember the Gmail account name or password.
2. I've searched the entire Internet (LOL) including Spanish and Chinese websites/videos but no luck. I can't find anything about putting this badboy into recovery. The reset button is just for show...it only turns the tablet off in case the power button is unresponsive.
3. I've been to the website of "manufacturer". It's a Portuguese company (I speak the language) but they haven't responded to any contact requests. And they appear to offer the firmware for the devices but download link is dead. So I cannot even get the firmware to flash it. The dude on YouTube has not sent me any link to firmware.
But the bigger problem and the key to the issue is that I cannot get the tablet to be recognized by the computer no matter what I've tried. I've tried all kinds of combinations of power button play but I never get that satisfying BEEP that indicates that there is a connection open. You see, I have the drivers for the tablet but there is no way to install them without the tablet giving the opening (even if it would come back as Unknown Device). So, I'm crap out of luck with this soft-brick.
Again, thanks for your help. After 3 days and probably 15 hours spent trying to reset this thing, I'm going to have to throw in the towel. Important lessons learned:
#1. NEVER PURCHASE AN ANDROID DEVICE THAT HAS NO VOLUME KEYS (or without knowing how to get into recovery). You're only asking for trouble if anything should go wrong. And believe me, this is the THIRD TIME I've seen a device that cannot go into recovery. In one case, I was able to flash new firmware directly on bootup off the external SD card (it was an Android laptop with WM8505 chip). I guess one out of three ain't bad odds...but they are not the kind of odds you want with expensive devices.
#2. ALWAYS TURN ON USB DEBUGGING WITH ANY ANDROID DEVICE YOU OWN AND TELL YOUR FRIENDS TO DO THE SAME. One day, it may end up being the savior of the life of that device because it usually means you can access the device via ADB in case of a soft-brick. LOL.
CVAngelo said:
Hey thanks for getting back to me. You've been extremely helpful and your response may hopefully be found in future by others who have the same problem.
Here's how it's working out for me with this device:
1. It has Google Play but unfortunately the wifi is turned off and there's no way to connect. But in any event, the little kid whose tablet it is (I'm working on the tablet at the request of her father who is my friend), she doesn't remember the Gmail account name or password.
2. I've searched the entire Internet (LOL) including Spanish and Chinese websites/videos but no luck. I can't find anything about putting this badboy into recovery. The reset button is just for show...it only turns the tablet off in case the power button is unresponsive.
3. I've been to the website of "manufacturer". It's a Portuguese company (I speak the language) but they haven't responded to any contact requests. And they appear to offer the firmware for the devices but download link is dead. So I cannot even get the firmware to flash it. The dude on YouTube has not sent me any link to firmware.
But the bigger problem and the key to the issue is that I cannot get the tablet to be recognized by the computer no matter what I've tried. I've tried all kinds of combinations of power button play but I never get that satisfying BEEP that indicates that there is a connection open. You see, I have the drivers for the tablet but there is no way to install them without the tablet giving the opening (even if it would come back as Unknown Device). So, I'm crap out of luck with this soft-brick.
Again, thanks for your help. After 3 days and probably 15 hours spent trying to reset this thing, I'm going to have to throw in the towel. Important lessons learned:
#1. NEVER PURCHASE AN ANDROID DEVICE THAT HAS NO VOLUME KEYS (or without knowing how to get into recovery). You're only asking for trouble if anything should go wrong. And believe me, this is the THIRD TIME I've seen a device that cannot go into recovery. In one case, I was able to flash new firmware directly on bootup off the external SD card (it was an Android laptop with WM8505 chip). I guess one out of three ain't bad odds...but they are not the kind of odds you want with expensive devices.
#2. ALWAYS TURN ON USB DEBUGGING WITH ANY ANDROID DEVICE YOU OWN AND TELL YOUR FRIENDS TO DO THE SAME. One day, it may end up being the savior of the life of that device because it usually means you can access the device via ADB in case of a soft-brick. LOL.
Click to expand...
Click to collapse
At last, did we find at last how to enter in recovery mode if there is only one button (power). I am in the same situation with @CVAngelo .Is it possible not to exist recovery mode at all? My tablet is BENEVE R708G with Rockchip RK2928. I tried every combination with power button and reset button but no luck at all.I have boot loop after trying to change the bootanimation.The weird thing is that the new boot animation ''works'' but after that it goes on boot loop forever.
Hi,
BeforeI begin I would like to state the I have searched the forum for solutions but the ones i findthe person can get into DL mode the only one that is just like my issue doesnt show how ODIN worked for him. but anywho...
I have a Glaxy SGH-I717 and it is stuck at the "FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN."
How this started was I newly installed Kies and tried to back it up, but by mistake started to upgrade it. not wanting to mess up the phone I let it run without the phone being in download mode. after a bit the upgrade failed and my phone was stuck at the error message screen above. to reboot the phone i have to remove the battery. pressing the button on turns it off but back on at the error screen. my computer makes the sound like it recognizes the phone but doenst show it in my computer. Kies just says connecting for awhile then stops.
Things I cant do with the phone
- get into download mode - when trying it goes the the press up or down button (ethier one goes to error screen)
- get into recovery mode - the samsung logo flashes for a second then goes to the error screen
things i have tried
- Using oding to flash ROM(tried two different files both from da_g for flashes)
each time odin states it failes at the write stage
- Kies emergency recovery (it freezes at 0% somtimes it says the phone is disconnected)
- Used one click fix program (made me click more then once)
I'am curently looking into trying the adb solution usind android sdk. just making the post here to see if anyone knew a easier solution to this.
Fixed
Problem is fixed, switched USB ports and found a different ROM to flash in ODIN. I now see why people love ODIN better then Kies
heelllp
Rremann1 said:
Problem is fixed, switched USB ports and found a different ROM to flash in ODIN. I now see why people love ODIN better then Kies
Click to expand...
Click to collapse
what ROM did you use? where can I find it? I have the same problem you had, except I was only trying to hard reset the sgh-i717 but the only option I could seem to get to was "A custom OS can cause critical problems in phone and installed applications. If you want to download a custom OS, press the volume up key......" etc This is my friends phone I was just trying to hard reset it because she forgot her pattern lock, so I downloaded a ROM and odin and when I attempted to flash it, it got to that error screen you had. It lets me get back to the previous screen but always goes back to firmware upgrade issue screen no matter if i choose up or down. :crying: I have flashed a couple phones before by following tutorials on the web. I though it was only giving me that option because the phone might have already been rooted, it never let me go to the wipe data menu. The instructions all said to hold volume up + home + power, it never did anything for me. I was only able to get to the custom OS screen by holding volume down and power button. you were able to get back to the ready to flash screen? Tried taking out the battery and turning off with power button always goes back to Firmware upgrade encountered. Please help if you can, if I am breaking some forum rules sorry! just need help! Am running windows xp, since the phone was loccked have no idea what it was running, just that its an att samsung galaxy note sgh-i717. it saysin odin mode, custom binary download: no, current binary : samsung official.
thank you!
---------- Post added at 10:50 PM ---------- Previous post was at 10:03 PM ----------
tech_girl85 said:
what ROM did you use? where can I find it? I have the same problem you had, except I was only trying to hard reset the sgh-i717 but the only option I could seem to get to was "A custom OS can cause critical problems in phone and installed applications. If you want to download a custom OS, press the volume up key......" etc This is my friends phone I was just trying to hard reset it because she forgot her pattern lock, so I downloaded a ROM and odin and when I attempted to flash it, it got to that error screen you had. It lets me get back to the previous screen but always goes back to firmware upgrade issue screen no matter if i choose up or down. :crying: I have flashed a couple phones before by following tutorials on the web. I though it was only giving me that option because the phone might have already been rooted, it never let me go to the wipe data menu. The instructions all said to hold volume up + home + power, it never did anything for me. I was only able to get to the custom OS screen by holding volume down and power button. you were able to get back to the ready to flash screen? Tried taking out the battery and turning off with power button always goes back to Firmware upgrade encountered. Please help if you can, if I am breaking some forum rules sorry! just need help! Am running windows xp, since the phone was loccked have no idea what it was running, just that its an att samsung galaxy note sgh-i717. it saysin odin mode, custom binary download: no, current binary : samsung official.
thank you!
Click to expand...
Click to collapse
I have read several forums searching for answers, no one ever stated that odin will still work while on the screen that said "Firmware upgrade encountered an issue..." pretty positive it flashed the lock screen background and the user settings that were on the lock screen are no longer there it had said something to the effect of " ____ password protected!" ill leave the blank up to your imagination. The user settings are gone but not the pattern lock! all I want to do is hard reset to eliminate the lock pattern lock???
Thanks
ROM Link
tech_girl85 said:
what ROM did you use? where can I find it? I have the same problem you had, except I was only trying to hard reset the sgh-i717 but the only option I could seem to get to was "A custom OS can cause critical problems in phone and installed applications. If you want to download a custom OS, press the volume up key......" etc This is my friends phone I was just trying to hard reset it because she forgot her pattern lock, so I downloaded a ROM and odin and when I attempted to flash it, it got to that error screen you had. It lets me get back to the previous screen but always goes back to firmware upgrade issue screen no matter if i choose up or down. :crying: I have flashed a couple phones before by following tutorials on the web. I though it was only giving me that option because the phone might have already been rooted, it never let me go to the wipe data menu. The instructions all said to hold volume up + home + power, it never did anything for me. I was only able to get to the custom OS screen by holding volume down and power button. you were able to get back to the ready to flash screen? Tried taking out the battery and turning off with power button always goes back to Firmware upgrade encountered. Please help if you can, if I am breaking some forum rules sorry! just need help! Am running windows xp, since the phone was loccked have no idea what it was running, just that its an att samsung galaxy note sgh-i717. it saysin odin mode, custom binary download: no, current binary : samsung official.
thank you!
---------- Post added at 10:50 PM ---------- Previous post was at 10:03 PM ----------
I have read several forums searching for answers, no one ever stated that odin will still work while on the screen that said "Firmware upgrade encountered an issue..." pretty positive it flashed the lock screen background and the user settings that were on the lock screen are no longer there it had said something to the effect of " ____ password protected!" ill leave the blank up to your imagination. The user settings are gone but not the pattern lock! all I want to do is hard reset to eliminate the lock pattern lock???
Thanks
Click to expand...
Click to collapse
Hi I am sorry if this is hard to read i' am a little bit ____ ill leave the blanks up to your imagination. below is the link to where u can use the rom i used. and yes you can run odin on the error screen.
go to this site download pdr.tar there's a link for odin as well. GL
Hope this helps ^^
Sorry to rez such an old post but i broke screen on my current phone and needing another phone asap I ventured into the big bin labeled Misc Phone Parts and all i could find (screen came on)was my old Note. Popped in in Sim using an adapter.
And thought i was good until I saw Phone icon dots Yellow triangle dots PC monitor. Firmware Upgrade encountered an issue. Please select recovery mode in Kies & try again.
After about 6 hours I do not have it working. I am not new to samsung flashing having flashed my first phone 4 years ago and since then installed 30 plus custom ROMS on all my Galaxy phones through out the years. Sure I can just find used much better phone but then this will not be resolved and will keep me up at night. (if your like this you know what I am talking about).
So back on XDA where I am thankful and appreciate all the members who have contributed helpful information that has saved this world from filling with an ocean of frustration. Myself being one of those who has been saved many times by reading and following directions of what others have done. I like to think that a persons efforts to help someone last well beyond their own lifetime. Thank you sir or miss (yes you) for the work done selflessly with out recognition and reward that continues to help make the lives of others who they may never meet or know better and more happy.
This may turn out a bit long...
My s2 has been playing up in one way or another for a few months now such as freezing, turning itself off and kept going into drive mode by itself then last week all my messages deleted and I couldn't send or receive any more and then the next day it turned itself off and I can't get it back on properly. It turns on, goes onto the Samsung Galaxy S2 screen then onto the O2 welcome screen then to the screen with the flashing S then just goes between that and the O2 screen over and over again. Been looking for help the last few days and the main thing I could find was to go into recovery mode and restore it but I can't do that because my home key doesn't work. So nor could I do the second thing I read could help which was to go into download mode and flash it. I didn't even know anything about recovery mode, download mode, flashing, rom, odin or anything else until last week. My phone is exactly as I bought it. I then read about a usb jig which would force it into download mode which I got today and it didn't do anything. I actually couldn't care less about the phone, I would love to just smash it to bits! BUT is there any chance I will ever be able to do anything get it back on just once so I can get my photos and videos off it? I've connected it to the computer but it comes up as an Android Modem so that I can't get the files off that way and it won't connect through Kies either. I know sending it to be repaired would end up with it coming back totally wiped so no point doing that. I normally wouldn't be so bothered it's just there's pictures of my daughter's first birthday and holiday and videos of her first steps. Is there anything else that can be done? Thanks.
There's a 0.000001% chance the phone will boot normally & your stuff will be intact if you can get into download mode & flash a one part stock rom. The more likely scenario is you'll need to flash a 3 part rom which will wipe the device.
You could try ADB to get into download mode, but you're going to need to be motivated to learn how to use it (plenty of tutorials on XDA/elsewhere; search). If that doesn't work for whatever reason, try fixing the home button.
Being a former betting man though, I don't like your chances of recovering data.
MistahBungle said:
There's a 0.000001% chance the phone will boot normally & your stuff will be intact if you can get into download mode & flash a one part stock rom. The more likely scenario is you'll need to flash a 3 part rom which will wipe the device.
You could try ADB to get into download mode, but you're going to need to be motivated to learn how to use it (plenty of tutorials on XDA/elsewhere; search). If that doesn't work for whatever reason, try fixing the home button.
Being a former betting man though, I don't like your chances of recovering data.
Click to expand...
Click to collapse
Thanks for replying. I don't have a clue what a one part or three part rom are sorry! Doesn't look good then. I'm so annoyed. I had planned to sort through my files and get them backed up last weekend because I knew this would end up happening and the stupid phone died on Thursday! I don't think fixing my home button would help because the volume button didn't work much either, it's a wreck to be honest! Had a quick look at ADB, looks complicated but I'll have a proper look later on as a final hope otherwise I'll just have to accept my files are gone for good
Just an update...tried to get into download mode with adb but it doesn't find my phone. Is this because it only comes up as an android modem by any chance? Think I may have to give up hope. At least I will learn from this and back things up a lot more often!