So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
kazador07 said:
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
I fixed the zte avid plus z828 frp problem!
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
please do!!!!
Yerhope said:
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
Click to expand...
Click to collapse
Hello yerhope!
from your last report on zte z828 frp bypass, i understood that you finally fix the , not able to access the Developer option nor access the factory reset. I am very keen to know how you did it.
I am a victim of this same circumstance.
guide please?
cant click reset my self
Hey, I would like to highly request the tutorial....
Furthermore, I'd like to say I've poured over these sort of sites, rephrased my questions, etcetc all trying to get the same things accomplished, getting past the google password, and yet you with your quick clearly stated actually step by step explanation were the one to get me the farthest in fixing this problem. :highfive:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
can root and remove with gcpro.
thats what i did. with this, even wen u get into settings and tap factory reset, ntn will happen.
re: zte z828 resolved problem???
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
xdauser9981 said:
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
Click to expand...
Click to collapse
He did get in. I did get in myself but when i tap factory reset nothing happen.
(Security patched)
Maybe he did resolve it like i did.
Root and remove it with gcpro
Thats what i did.
On some ZTE phones (has worked on 1 but not another for me), you can use the emergency dialer to dial:
*983*987#
This will lead you directly into factory reset options (if it works).
Solution worked on Acer Iconia B1-850 Tablet
Yerhope said:
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
Click to expand...
Click to collapse
Solution!
Yerhope said:
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Click to expand...
Click to collapse
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
o12VOLTSo said:
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
Click to expand...
Click to collapse
Does this mean you have confirmed this on ZTE?
Yerhopes solution worked for my zte lever
Follow yerhopes solution after step 15 while in settings go to backup and reset make sure back up data is off then factory reset erase Everything phone will reboot old owners info gone no need to download anything worked for 2 Zte levers i bought from ebay.
Bought a EE Jay Tablet (also a ZTE tablet) that had FRP enabled, easiest way I could do it was
1. connect to wifi, get to the previous account required screen.
2. open the keyboard and hold the @ symbol and open the keyboard settings.
3. top right corner press the 3 dots and choose help and type in apps in the search box.
4. access the app settings screen via the link from the help section then goto all and launch settings app
5. enable unknown sources in security and return to app settings screen and launch chrome this time or any browser.
6. goto http://rootjunkysdl.com/files/?dir=Apps and download this file com.sika524.android.quickshortcut.apk
7. you may get a download notification that the file has finished if not go back again to the app settings screen and all again and launch downloads app
8. you will now see the file download open it and install and then open the app
9. in the quick shortcut app search for google account and choose email and password and select try
10. now the google accounts manager has launched, in the top right corner press the 3 dots and choose browser sign-in
11. sign in with a google account and once done it will close and go back to the quick shortcut maker.
12. you still won't have access yet but all I done was reboot the device and continued the setup, this time there was no errors or required sign in and had full access.
Hope this helps someone, this was basically a copy of this video which may be helpful https://www.youtube.com/watch?v=GKdVvBSIb0M
Idk wat im doing but watever I do cant make crap any worse so I went under security and theres a place says trusted agents I clicked that and it said google smart lock so I turned it off im hoping this works guys ill let u know
yes
Arykit said:
Does this mean you have confirmed this on ZTE?
Click to expand...
Click to collapse
I used this method, personally, for zte Avid I believe. Yerhope's solution works for some firmwares prior to firmware i was on. i'm sorry, i do not recall that at this moment as it was some time ago. if Yerhope's solution is not effective for you, then progresss to my steps that pick up right where previous solution left off. so once again, YES, this worked on my device, did not test for others. my understanding is kingo can acquire root access in a special way as well that will allow you to adb clear frp. looking for commands? i do not have them sorry.
hi
i'm trying to frp bypass for infinx hot 4 android 6.0 ... with frb baybass 1.0.apk and quick shortcut maker apk but i can't found Browser sign-in to enter the new account .. any way to do this ?
is it mtk or qualqam phone?
ahmedsaber20005 said:
hi
i'm trying to frp bypass for infinx hot 4 android 6.0 ... with frb baybass 1.0.apk and quick shortcut maker apk but i can't found Browser sign-in to enter the new account .. any way to do this ?
Click to expand...
Click to collapse
i had this problem on my android 5.1 , after tried many way to fix , i found a new working way for my phone ,you must try this step :
1) STEP 1. Go to the Google page where it is showing to enter the login details. Â Shown in below fig.
STEP 2. Now you have to find that How can you go to the Phone Setting from the keyboard. First You try to go to the Keyboard Setting anyhow and from there to the Phone Setting. It is pretty simple.
NOTE: You can go to the keyboard setting from the Keyboard itself. You have to find that after pressing which key it will take you to Keyboard setting option. Like in my case (using Google keyboard) I can go to the Google Setting by holding the commas for some sec. Â So you have to find this yourself , Which key takes you to keyboard setting.
STEP 3. When you are at the Keyboard Setting. Chick on the three dot menu at the top to the right.
STEP 4. Go to About  and then to Open source Licences and copy any text there.
STEP 5. After copying text, there is Search bar option appears in the top to the right. Click on search bar.
STEP 6. Then it will show to Complete Action using. You will click on Chrome only.
STEP 7. In the search bar of Chrome, type SETTING and it also give suggestion of Phone Setting. Â Click on phone setting.
STEP 8. Account / choose exiting / enter email and password of any gmail account to sign in / just wait account to sync / just reboot the phone
STEP 9. ACCOUNT ADDED ( FRP BYPASSED)
Bypasa FRP by VLonco Channel
U can check my tutorial on youtube. Keywordd VLonco Channel
Use miracle box. Works for me all the time
AndroidHQ254 said:
Use miracle box. Works for me all the time
Click to expand...
Click to collapse
Can i get it throught the inthernet without paying one hundred dollars ????
SamsungGalagaxy said:
Can i get it throught the inthernet without paying one hundred dollars ????
Click to expand...
Click to collapse
You can get a patched version on the internet
I was able to make activate google assistant in my rooted android instance on Chromebook Pro. However, I get stuck on the screen "setting not supported". Any ideas? Assistant on this thing would be a game changer. I can't take a picture of the actual error box because google greys out screenshots when sensitive dialog boxes are being displayed. The warning is literally just "setting not supported" I'm guessing there is no assistant support at all in this version of android but maybe it's possible to add it?
can chromebook plus do that?
can you please post your method?
I had it!!!!
I was able to get Google Assistant working on my rooted Chromebook cb3 - 532 using Google app version 6.11.19.21 and the latest assistant app on the playstore.. However, no sooner than I updated, it was no longer working. I came up with another idea which I'm trying out now.... I'm attempting to alter two PROP files using the rooting shell scripts provided by Nolirium at blogspot for rooting chrome os to make the drive writable and set selinux to permissive, in order for my changes to build.prop and default.prop to survive the reboot, and be effective.
tdct12 said:
I was able to make activate google assistant in my rooted android instance on Chromebook Pro. However, I get stuck on the screen "setting not supported". Any ideas? Assistant on this thing would be a game changer. I can't take a picture of the actual error box because google greys out screenshots when sensitive dialog boxes are being displayed. The warning is literally just "setting not supported" I'm guessing there is no assistant support at all in this version of android but maybe it's possible to add it?
Click to expand...
Click to collapse
Hey!!!
Actually it is possible on all chromebooks in the canary channel. I’ve done it to my dell chromebook 11 candy model from 2015. Here is how you do it:
1. Be in developer mode (assuming you already are in it.)
If you aren’t in it and don’t know how to, press esc+refresh+power. When it boots up, press control+d and again when it boots up again. NOTE THIS DOES POWER WASH YOUR DEVICE!!!
2. Once you sign into your account again, press control+alt+t and a terminal will show.
3. Type in “shell” and hit enter.
4.Then type in “live_in_a_coal_mine” and press enter again.
5. Press “y”
6. when it is done, go to your settings and update your machine.
7. When it is done, go to chrome://flags and search for “assistant” and then enable it.
8. Then reboot.
9. When your device is done rebooting, go to chrome://assistant-optin and follow the instructions. 10. Then you have google assistant installed!!!
You can find it in the launcher. It’s the assistant button next to the search bar. If you set voice activation, you can also activate it by saying “ok google” or “hey google”
FRP Bypass Samsung Galaxy S10 - 100% WORKING!
This method works!! No simcard is need to be inserted, no puk code is need to be used or other crap I have seen on alot of places, this is simple and a very easy way to frp bypass your samsung galaxy 10 without paying money for "pro" tools, this method is so easy so even your grandmother would succeed.
Totally there is three ways that I have found that allows anyone to bypass FRP very easy on the latest firmware (2020-03-14)!
One method is via NFC, the second option is via OTG cable between one android device on android v9.0 and your samsung s10 that is on android v10.0 and the third option is the most easy one so i decided to describe it for you all out there.
0. Turn off the device and remove simcard.
1. Enter recovery mode by keep device off and then press volume up + bixby + power button
2. Wipe cache and do a factory reset and then choose to reboot your device
3. Phone will now start as normal, change language to your prefered language
4. Take a screenshot at welcome screen with power + vol down, you will see "Allow samsung capture to access photos, media and files of your device" - Choose 'Deny' here.
5. Take another screenshot at welcome screen, an extra option that is 'Deny & dont ask again' - Choose this one this time
6. Now, take a third screenshot at welcome screen and you will get a totally different option, You will get a Allow Permission window popup instead now, choose 'Site Settings' here.
7. You will now get into Samsung Capture option, choose to allow permissions for storage if you want to be able to take screenshot, however the important part is to go to Permission option.
8. Now you should see 'Storage, Camera and Microphone, choose Storage' option here and then press on See all apps with this permission
9. Now press on the three dots in upper right corner and choose "Show System" option
10. There is many options you can choose here, let us browse down to "Google Chrome/Chrome" browser - Edit option from Deny to Allow and then press on see all Chrome permissions if you want to start chrome for example.
11. But even more interesting is that you will see settings icon at top, press on 'See all Settings permissions' - In next window just double click the settings icon at top for get to next window and now in down left corner - Choose 'Open' and you're in settings!
12. Scroll to bottom and press on 'about phone' and u will see "Reset" button, press on it to reset settings only and keep your data. (optional)
13. Now you just need download google account manager and add a new account and the old one will be overwritten (use web login in google account manager by pressing in upper right corner when you started account manager). If you want to join System UI just choose system ui in quickshortcutmaker.
quickshortcutmakercan be downloaded from: quickshortcutmaker
Pictures for those who prefer that can be found on my repo, click can be found on my github, click here for visit the repo.
Enjoy your fully unlocked Samsung Galaxy 10 device.
// wuseman
14 april 2020
I believe they fixed it. Is there any other method like going previous version and trying it again?
What's the furthest security patch
Up to what security patch does this support?
Does not work on A
download is offline....
speckdeckel said:
download is offline....
Click to expand...
Click to collapse
Fixed the url.
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
BishalPo said:
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
Click to expand...
Click to collapse
yeah "Add unlock FRP all version, all model (paid service)" really ?!?!?
BishalPo said:
In 2023 i just try today to bypass my Samsung FRP using SamFw FRP Tool it work's and it 100% free and one click work.
Click to expand...
Click to collapse
very doubtful about this, is it possible to check the source code?
I don't see how it would work in practice, especially when it is not possible to use mtp commands (at the time of writing it is not possible afaik, not last week when I tried on s23) on the recent android phones
It might work on older models but hardly on today's, tell me more technical details how that tool work please?
Hi,
I managed to get the Android 11 update with a bit of stuffing around and thought I would share for everyone else, I did this on a unlocked Australian variant bought from Optus, you're mileage may vary.
This will activate dual sim mode on the phone with a single IMEI, I left my location set to Europe so it is upto you if you follow the last step to remove Dual Sim Mode.
You will need to backup anything you don't wish to lose as a full factory reset is required.
I did some digging and this will work with the same rom on A52, A72 and A92.
Could I get a moderator to cross post this to the other device forums please?
Requirements:
OPPO A72/A52/A92 - My bootloader is locked, My simlock is off
CPH2067_11_A.54 Latest European ROM for the device - Download Here: https://support.oppo.com/nl/software-update/software-download/?m=A72
Oppo Free Unlock Tool - https://forum.xda-developers.com/t/...de-to-coloros-11-and-enable-dual-sim.4191787/
A Google account to download ExpressVPN (This is the second last step so leave for now)
A Windows PC with a internet connection
WIFI or Mobile data on phone.
Latest ADB Drivers - https://adb.clockworkmod.com/
Instructions:
1) Backup all settings and user data.
2) Remove all accounts and screen lock security settings on phone.
3) Format all data, factory reset phone.
4) Download Oppo Free Unlock Tool from the link provided to PC.
5) Follow these instructions to install Microsoft Loopback Adaptor -
6) Open Device Manager and expand the Network Adapters category.
7) Find your Loopback Adaptor and double click it to open its properties.
8) Go to the Advanced tab and find the Network Address option in the Property pane.
9) Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
10) Install ADB Drivers.
11) Extract OPPO Free Unlock Tool, You're antivirus may give a false positive so you will have to manually add an exception for the tool.
12) Go to where you extracted the unlock tools. Open Sec5.exe.
13) Plug in phone via USB and select "Transfer Files".
14) Enable developer options on phone and activate USB Debugging.
15) Press Allow when prompted to give PC ADB access.
16) Open Sec5 window.
17) After about a second, a string of numbers and letters should show up in the left pane, Press Start Unlocking and few seconds later, "OK" should start flashing in the right pane.
18) Press stop unlocking and disconnect phone.
19) Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. (Take note of the one highlighted in green as you will need this in the final step).
20) Choose this one: "Europe EUEX" and click Ok you're phone will restart.
21) Download the rom from provided link to the phone and install through recovery mode.
22) Add your google account and download ExpressVPN from Play Store.
23) Open ExpressVPN and start 7 day trial then set to Netherlands server.
24) Goto Settings then Software Update and you will see Android 11 available to download.
25) Click Download then when complete Click Install
26) Remove Google Account from phone and factory data reset again.
27) Use instructions 12-20 to set your phones location back to your original setting.
That's All Folks
@MuntedJester THREAD CLOSED as duplicate of
Android 11/ColorOS 11 OPPO A72 Update with VPN
Hi, I managed to get the Android 11 update with a bit of stuffing around and thought I would share for everyone else, I did this on a unlocked Australian variant bought from Optus, you're mileage may vary. This will activate dual sim mode on the...
forum.xda-developers.com
The thread has also been moved from the development section into this sub-forum.
XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse
Also review the sticked "Device Forum Rules (Read before posting)" with special focus on the conditions what threads qualify for the development section.