[ROM][Unofficial] LineageOS 13.0 for OnePlus 2 [06/01]

[ROM][Unofficial] LineageOS 13.0 for OnePlus 2 [06/01] - OnePlus 2 Android Development

I know some of you may wonder why even post something as old as marshmallow. I still get a lot of use from LOS 13, and have been building it for myself for a while. I figured I'd upload the latest with Jan security patches, for those who want it. Happy flashing.

Not sure about the support we'll get from LOS going forward. They never merged February security patch, but they may have just been busy. We'll see.

does it have hal3 with hdr and all that cool quality we used in marshnallow?

chxei said:
does it have hal3 with hdr and all that cool quality we used in marshnallow?
Click to expand...
Click to collapse
It does, HAL3 and hdr
I run mine with amplify, greenify, android n-ify, gravitybox, and alert slider app

monark88 said:
LOS 13.0 Unofficial, ROM for the OnePlus 2
Click to expand...
Click to collapse
wow, this is great!
thank you mate!

You can get volte by flashing the kenzo patches. Just saying.

I also built this ROM myself to which I had mentioned in another post. Good job!
Any chance you're able to build with release keys instead? This will then allow some apps (its quite minimal) to run correctly.

Woodzrul said:
I also built this ROM myself to which I had mentioned in another post. Good job!
Any chance you're able to build with release keys instead? This will then allow some apps (its quite minimal) to run correctly.
Click to expand...
Click to collapse
The download link now points to a signed version. You can download it here:
https://www.androidfilehost.com/?fid=673956719939814327

using 22nd Jan build since yesterday.
I missed so much the great customization that CMTE brings to LOS!
as far as I can see 'til now, there's no issue at all with your ROM.
excellent work, thank you!

utkarsh102 said:
You can get volte by flashing the kenzo patches. Just saying.
Click to expand...
Click to collapse
More info on this, please?
Kenzo is redmi note 3 iirc
Would the .zips work for OP2?

GuyGotMadNameGame said:
More info on this, please?
Kenzo is redmi note 3 iirc
Would the .zips work for OP2?
Click to expand...
Click to collapse
Yes. They will. Flash the patch1 zip, boot up the phone, wait 10-15 seconds until you start seeing that the com.android.phone has stopped working. Then go to recovery and flash patch2 zip, clear dalvik cache and reboot. Voila.

utkarsh102 said:
Yes. They will. Flash the patch1 zip, boot up the phone, wait 10-15 seconds until you start seeing that the com.android.phone has stopped working. Then go to recovery and flash patch2 zip, clear dalvik cache and reboot. Voila.
Click to expand...
Click to collapse
I'll add this to the first post

utkarsh102 said:
Yes. They will. Flash the patch1 zip, boot up the phone, wait 10-15 seconds until you start seeing that the com.android.phone has stopped working. Then go to recovery and flash patch2 zip, clear dalvik cache and reboot. Voila.
Click to expand...
Click to collapse
Thanks for this. I updated first post.

Does anyone know of any cm13 theme which properly themes all the essential apps?

This ROM has been a really good ride for the past month or two for me - very stable and actually there is not much new in Android 7.x which really matters. LineageOS unfortunately made 14.x unstable by reworking the kernel in the middle. It's ok for the most time but then some random event happens and it will drain your battery in few hours.
I think I will stay on this ROM assuming Android security patching still happens in future. Thanks monark88!

aiwan3 said:
This ROM has been a really good ride for the past month or two for me - very stable and actually there is not much new in Android 7.x which really matters. LineageOS unfortunately made 14.x unstable by reworking the kernel in the middle. It's ok for the most time but then some random event happens and it will drain your battery in few hours.
I think I will stay on this ROM assuming Android security patching still happens in future. Thanks monark88!
Click to expand...
Click to collapse
I've got a new build, but nothing is significantly changed. I've been working on a custom kernel for MM, with extra governors and upstream merges. I'm running this ROM myself, so you can bet when there is a security patch, I'll upload it for us all.
I'm with you on anything above android 6.0. When LOS 14.x kernel was reworked, I was on RR unofficial. I remember the drastic changes. I compiled this not soon after and have been on it since. I've watched on the forums as everyone has scrambled after HAL3, and balancing HAL3 with HDR (or the lack there-of) and all the non-sense that goes with it.
Meanwhile we've got manufacturer supported blobs and code for everything our phone was meant to do, in a nice stable OS.
If you're reading this, and thinking about trying it, just download the ROM, flash xposed (or use xposed magisk) and get Android N-ify, Amplify, Greenify, Alert Slider, and GravityBox. You'll be kicking it on the OP2 old school, updated, and stable.

That's right. Many people don't seem to be very methodical when testing new ROMs. Mostly noted on comments about battery life. I don't use my phone much as the majority of my daily work / comms happens on PC - so its easy for me to see changes when I update the phone. I don't use gapps either, so my testing is purely based on the kernel and the ROM performance. This ROM can go up to 5-6 days in idle / light usage, whereas the latest official LineageOS 14.x is probably around 4 days same use. Feel free to test. Same applies to boeffla-kernels, they consume much more battery on idle than the LineageOS stock.
I'm not a developer myself but it's easy to understand that all this hacking for newer Android versions than the source code provided by manufacturer, can very easily lead into problems. It could be ok, but unfortunately many people always think that the latest is always better. I think it's fair to say that new android versions just complicate the menus and slow down devices more than the useful features provided. As long as security is updated, I don't really see any need for Oreo in my phone.
It's nice to hear that you are also testing for new things in kernel, I might test them if provided as separate update.zip. However I assume most people using LOS 13 or your build are probably after stability.

Hold on right here...i need a minute to comprehend...so, basically, if i flash this, i will get the most stable android experience there is, it will most likely improve my battery live over N/O roms, i will have all the OOS 3.6.1 OP2 features working (including things such as slow motion, HDR and panorama), the latest security patch will be installed and the only drawback is that it will be a MM release? whats the catch ?

Jackill said:
Hold on right here...i need a minute to comprehend...so, basically, if i flash this, i will get the most stable android experience there is, it will most likely improve my battery live over N/O roms, i will have all the OOS 3.6.1 OP2 features working (including things such as slow motion, HDR and panorama), the latest security patch will be installed and the only drawback is that it will be a MM release? whats the catch ?
Click to expand...
Click to collapse
Lol, for the most part (and in my opinion) yes.
The catch is that if you like the latest cutting edge features, we don't have that built-in here. All we offer is a stable phone that has ALL of the features working in some form or another, without wondering what will break in the next build.
For the record, I still flash Oreo ROMS on MultiROM to stay aware, but I run this as a daily driver.

Related

[ROM][OFFICIAL][PAYTON][NIGHTLIES]Lineage OS 17.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Introduction:
This is the official Lineage OS thread for the Motorola Moto X4, codename payton.
We support all the T-Mobile, International, and Project Fi variants, as their bootloaders are unlockable, while we can't support the Verizon and AT&T variants, as their bootloaders are permanently locked.
How to install:
Boot the newest TWRP .img from the Official TWRP Project Site.
IF YOU ARE COMING FROM STOCK AND WANT TO INSTALL CUSTOM ROMS FOR FIRST TIME, INSTALL "Copy Partitions Zip" FROM POST #2
In TWRP, click "Wipe", "Format Data", then type "yes" as prompted.
ADB sideload the newest weekly
(Optionally) You can flash the newest TWRP Installer also found at the Official TWRP Project Site if you wish to maintain TWRP, though the pre-installed Lineage Recovery instance will do everything you need it to in most cases. We don't recommend or support the use of the TWRP installer, as it is overwritten on every update (will need to be re-installed every update), and has no addon.d-v2 persistence.
Click "Reboot, then choose "Recovery", this will boot you to either Lineage Recovery or TWRP depending on your choice to install TWRP or not. It is necessary to reboot between ROM flash and GApps/Addon flash due to verity/slot-swap logic.
(Optionally) Flash GApps - MindTheGApps arm64 are recommended, OpenGApps are compatible with A/B as of 09102018, but I still only reccoemend and support MindTheGApps.
(Optionally) Flash SU - you'll need to turn it on from in developer settings after first boot Lineage OS SU Addon. - Magisk works fine, though is not supported.
Reboot
Notes:
Official Lineage OS builds will not pass CTS/SafetyNet -- due to the AVB flag's "red" status. (Magisk works fine, though is not supported.)
Official Lineage OS builds ship with full treble compatibility, with VNDK runtime enforcement! This means that unlike most "ported treble" you'll see, ours is just as it would be from the OEM, and can run any GSI (yes, even Pie!) without need for hacks or additional flashable zips. We relabeled /oem as /vendor (as /oem isn't used in custom ROM's anyway). To use a GSI, flash official Lineage, then flash your GSI, it's that simple! Flashing a factory image will likely write over /oem and remove the mock vendor image. Please don't report GSI bugs here, report them instead to the GSI's maker.
Download:
LineageOS Updater
XDA:DevDB Information
Lineage OS 17.1, ROM for the Moto X4
Contributors
erfanoabdi, Lineage Team
Source Code: https://github.com/LineageOS
ROM OS Version: 10.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Official Pie
Version Information
Status: Stable
Created 2018-09-01
Last Updated 2019-03-02

Copy Partitions Zip
- courtesy @ @filipepferraz
Download
Firmwares
XT1900-1 Android 8.0
firmware_27.251.12_payton_retail_xt1900-1.zip
Only tested on
XT1900-1
XT1900-2
XT1900-5 (https://forum.xda-developers.com/showpost.php?p=76934354&postcount=173)
XT1900-7 (https://forum.xda-developers.com/showpost.php?p=76779696&postcount=14)
feel free to test on other Moto X4 models running 8.0.
XT1900-6 Android 8.0 - courtesy @filipepferraz
https://www.androidfilehost.com/?fid=674106145207492371
XT1900-1 Android 8.1 - courtesy @ptn107
https://www.androidfilehost.com/?fid=890278863836292604
tested on XT1900-7 as well (https://forum.xda-developers.com/showpost.php?p=76816113&postcount=92)

About OTA: see post #778
Back to Stock :

Nice work, guys!

Excellent work! It's impressive that you could get this done when one person didn't have the phone. That's a good ol' fashioned hackathon.

Can somebody confirm if encryption works?

i love you guys <3

igna.98 said:
Can somebody confirm if encryption works?
Click to expand...
Click to collapse
It says "Phone Encrypted" under Settings. So, yes.
---------- Post added at 03:15 AM ---------- Previous post was at 02:53 AM ----------
Also happy to report that Magisk works successfully by sideloading the zip in TWRP (Data will not get decrypted when you boot into TWRP after the first boot - just hit cancel to get to the TWRP main menu > Advanced > ADB Sideload and sideload the Magisk ZIP.) SafetyNet passes too! And Google Pay works (finally!!! ...It was broken for me on stock).

Just got set up:
- AOSP firmware flash working on google fi version running 7.1
- Twrp decrypt not working with pin on the linked twrp or 3.2.1.1. Have to remove pin before booting to recovery
- videos recorded are choppy and lag during playback through camera app. I'll check when I install another gallery app but I rarely record so not a huge issue right now.
- bluetooth working well
Liking Lineage so far, especially the dark theme it seems to default to. I'll update with more as I play around with this. Thanks.

Speaker not working
Edit: seems it's just media, not phone
Just ran into an issue, speaker doesn't work with any app I've tried. There is sound with Bluetooth in the same apps. Attached some logcats.

brandontowey said:
Edit: seems it's just media, not phone
Just ran into an issue, speaker doesn't work with any app I've tried. There is sound with Bluetooth in the same apps. Attached some logcats.
Click to expand...
Click to collapse
Interesting. Working for me - tested using the Amazon Music app.
Edit: YouTube was used to test as well. However, the speaker volume level across all apps is lower than stock.

smmankad said:
Interesting. Working for me - tested using the Amazon Music app.
Huh, just tried and it stutters and no sound in YouTube. What model are you using and did you have Oreo already? I'm on the Google fiber variant and came from 7.1. maybe I need to upgrade to stock Oreo then flash.
Click to expand...
Click to collapse

brandontowey said:
smmankad said:
Interesting. Working for me - tested using the Amazon Music app.
Huh, just tried and it stutters and no sound in YouTube. What model are you using and did you have Oreo already? I'm on the Google fiber variant and came from 7.1. maybe I need to upgrade to stock Oreo then flash.
Click to expand...
Click to collapse
I was on stock Oreo 8.0.0/March 2017 (am having the XT1900-1 RETUS non-Fi version). Maybe that's why.
Click to expand...
Click to collapse

Thank you so much, my Payton is now flying. XT1900-7

igna.98 said:
Thank you so much, my Payton is now flying. XT1900-7
Click to expand...
Click to collapse
which firmware file did you use? xt1900-1 or xt1900-6?

Dumb question, can you flash if you're on 8.1?

munchy_cool said:
which firmware file did you use? xt1900-1 or xt1900-6?
Click to expand...
Click to collapse
XT1900-1

Wow nice job.
Sent from my Moto G5 Plus using XDA Labs

Not using it yet...
But I wanted to thank you guys SO much for working on this. I see using Lineage as the long-term plan for my phone (and my wife's) but these are our daily drivers and can't afford them to be offline for long. Once it is verified solid, I will likely switch. Thank you again!

ebrandsberg said:
But I wanted to thank you guys SO much for working on this. I see using Lineage as the long-term plan for my phone (and my wife's) but these are our daily drivers and can't afford them to be offline for long. Once it is verified solid, I will likely switch. Thank you again!
Click to expand...
Click to collapse
Its pretty damn solid as is. I've been using it since yesterday and no random reboots, no glitches, and super fast. My X4 is my daily driver too, btw.

[ROM][8.1][A3 2016] ResurrectionRemix 6.2.1 for Galaxy A3 2016 | a3xelte | SM-A310xx

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Galaxy A3 2016 | a3xelte | SM-A310xx
UNOFFICIAL | Android 8.1
Download: HERE
Changelog:
Code:
[COLOR="Teal"]2019-02-08[/COLOR]
- Upstreamed new Kernel again from v3.10.61 to 3.10.108 for enhanced security and performance
- Fixed audio recording issue by not allowing to record with a bitrate below 48000 in the audio policy
- Updated stock vendor blobs from CRG1 to CRH1 for better security and stability (this time it mostly improved GPS)
- Fixed bluetooth calling
[COLOR="Teal"]2019-01-30[/COLOR]
- Initial release
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Click to expand...
Click to collapse
Installation instructions:
1. Make sure you have TWRP installed on your device to be able to flash the rom.
2. Download the latest build from the link above and copy it to a place where you can find it later.
3. Optionally download GApps for using the Play Store and other Google related services from here: https://opengapps.org. Choose ARM as architecture and 8.1 as the OS version. The size of the GApps package is upon to you how much apps you want to have preinstalled. Copy this zip aswell to a place where you can find it easy later. If you download it with Chrome or with the Google Drive App it should be by default in the Download folder.
4. Turn your phone off and press Volume UP + Home Button + Power button at the same time until the splash screen appears. Then your device should boot into the recovery. There you wipe following partitions: Data, System, Cache, Dalvik if this is your first install. All of your installed applications get lost by this. Your photos, videos etc. won't get deleted if you haven't ticked the box for internal storage. As the kernel also supports F2FS i would change the filesystem for the cache partition from ext4 to f2fs for a better system performance. Now go to the main TWRP menu, click on install and go to the place where you have placed your zips and first select the rom and then click on the left button if you have downloaded the optional GApps package to add another zip to the queue. Now swipe the slider at the bottom to install and reboot the phone to the system. The first boot can take a while and after booting you could experience some lags because of the GApps initialization but they should disappear after some time.
5. Now you have successfully installed the rom and you're ready to use ResurrectionRemix on your device. Congratulations!
Bugs:
- VoLTE (isn't working on samsung devices and won't work anytime in the future too)
- Same as LineageOS 15.1
Credits:
@danwood76 for maintaining the a3xelte device tree
@Stricted for maintaining the common device tree
Contributors:
@Borduni
Source Code:
https://gitlab.com/dariotrombello
https://github.com/ResurrectionRemix
https://gitlab.com/Exynos7580
Version Information
Android: 8.1 Oreo
Kernel: Linux 3.10.108
Status: Stable
Stable Release Date: 2019-30-01
Created: 2019-30-01
Last Updated: 2019-02-08

reserved

Many thanks:good:

I would just like to thank @Borduni @danwood76 @Stricted and all the devs that are helping maintain our device and bringing us updated ROMs! This was a rom i was wishing for very much! Thank you for all your efforts and time dedicated for us.

4-core processor or 8-core processor?
If 8 core enabled, can we get 4 core enabled version?
Also thank you all of you guys for still developing for A310F users. I wish i can donate for you guys but PayPal is not avalaible in our country.

senemir said:
4-core processor or 8-core processor?
If 8 core enabled, can we get 4 core enabled version?
Also thank you all of you guys for still developing for A310F users. I wish i can donate for you guys but PayPal is not avalaible in our country.
Click to expand...
Click to collapse
Quad Core Kernel. I won't publish any of my new roms with Octa Core Kernel's because of the high battery drain.
You don't need to donate me anything. I don't even have set up PayPal :laugh:.

Borduni said:
Quad Core Kernel. I won't publish any of my new roms with Octa Core Kernel's because of the high battery drain.
You don't need to donate me anything. I don't even have set up PayPal :laugh:.
Click to expand...
Click to collapse
Thanks bro. I will try this rom tomarrow.
And i dont like Octa Core too. Phone overheats and battery drain is too much like you said.
Keep up that great work !

Does sound work in all apps? I've used three other 8.0 roms and they all recorded mic very quietly in apps like Snap and Insta.

hajdud said:
Does sound work in all apps? I've used three other 8.0 roms and they all recorded mic very quietly in apps like Snap and Insta.
Click to expand...
Click to collapse
This will be fixed soon, it's on my list

2019-02-08
- Upstreamed new Kernel again from v3.10.61 to 3.10.108 for enhanced security and performance
- Fixed audio recording issue by not allowing to record with a bitrate below 48000 in the audio policy
- Updated stock vendor blobs from CRG1 to CRH1 for better security and stability (this time it mostly improved GPS)
- Fixed bluetooth calling

As I see this rom audio recording is working fine right? I had another issue with L15.1 which was that I couldn't get faceunlock to work at all, it didn't even show up in the setings. It wasn't the gapps cause I use those same gapps on extendedAOSP and it worked. Also at some point the mic stopped working, etheir for calls nor audio recording. I'm on 14.1 now but it doesn't play flac natively and the music player I use doesn't support flac by itself, all the rest is great en 14.1. So, if anyone is kind enough to advice me about this ROM that'd be great, I'm getting a little tired of flashing, mostly because I need the phone for work during the day and the microphone dying is not cool XD Thanks in advance.

LucasNerv said:
As I see this rom audio recording is working fine right? I had another issue with L15.1 which was that I couldn't get faceunlock to work at all, it didn't even show up in the setings. It wasn't the gapps cause I use those same gapps on extendedAOSP and it worked. Also at some point the mic stopped working, etheir for calls nor audio recording. I'm on 14.1 now but it doesn't play flac natively and the music player I use doesn't support flac by itself, all the rest is great en 14.1. So, if anyone is kind enough to advice me about this ROM that'd be great, I'm getting a little tired of flashing, mostly because I need the phone for work during the day and the microphone dying is not cool XD Thanks in advance.
Click to expand...
Click to collapse
Most audio issues are fixed in the latest version.
RR should be as stable as my Lineage OS builds as it is based on my trees. Only current issue is buggy MTP but this will be mostly solved in our kernel tree soon.

RR-Pie-v.7.0.1 is coming soon

Hi,
(This is my first post on xda, so I'm not sure I'm doing it right. Tell me if I should do it differently so I learn)
I like this rom, and have used it in various versions of several devices, so I'm happy to see it is developed for this device too.
However, when i try to flash it to my SM-A310F, I get the error that this rom is for a3xelte, while my device is (blank space) .
I use TWRP v. 3.0.2.1 and have flashed the revolution OS rom with success. This rom works ok, but I just miss some the customizations and functionalities in RR.
-And also the lack of samsung software, which I use none of and just disable.
I general, I can install roms which are based on the stock samsung rom in some way or another (like the revolution OS), but not roms like RR, dotOS or lineages.
From Software settings (running revolution OS):
Baseband: A310FXXU2BPG6
Kernel version: 3.10.105-NOUGAT-ALX-0.0.2
So, do any of you clever people have a good idea why my SM-A310F is not considered worthy for RR? Is there a way to flash it anyway, or is this a hardware issue of some sort?
And thanks!

Bobbobelob said:
Hi,
(This is my first post on xda, so I'm not sure I'm doing it right. Tell me if I should do it differently so I learn)
I like this rom, and have used it in various versions of several devices, so I'm happy to see it is developed for this device too.
However, when i try to flash it to my SM-A310F, I get the error that this rom is for a3xelte, while my device is (blank space) .
I use TWRP v. 3.0.2.1 and have flashed the revolution OS rom with success. This rom works ok, but I just miss some the customizations and functionalities in RR.
-And also the lack of samsung software, which I use none of and just disable.
I general, I can install roms which are based on the stock samsung rom in some way or another (like the revolution OS), but not roms like RR, dotOS or lineages.
From Software settings (running revolution OS):
Baseband: A310FXXU2BPG6
Kernel version: 3.10.105-NOUGAT-ALX-0.0.2
So, do any of you clever people have a good idea why my SM-A310F is not considered worthy for RR? Is there a way to flash it anyway, or is this a hardware issue of some sort?
And thanks!
Click to expand...
Click to collapse
You need to update TWRP. Here you find the latest official build: https://eu.dl.twrp.me/a3xelte

And also you could do a baseband update. Flash the newest firmware for your country via ODIN and install TWRP and RR after that again.
I recommend you to use RR 7 (Android 9) instead of this. I haven't published a build since a long while.

Thanks so much for the very quick response! I will give both a try starting with updating twrp. I'm not sure where to look for the baseband update, but I will try to find it if twrp update does not work.

Bobbobelob said:
Thanks so much for the very quick response! I will give both a try starting with updating twrp. I'm not sure where to look for the baseband update, but I will try to find it if twrp update does not work.
Click to expand...
Click to collapse
You can use the tool samfirm (google it) or updato.com
Baseband updates can improve signal strength/battery life. But it is not necessary.

Thanks again, I really appreciate your help.
I'd love to try RR7, but I can't find the download link in the relevant thread (it says removed by OP) or in the RR homepage. Therefore I chose this version instead. Is RR7 available somewhere else.

https://forum.xda-developers.com/sa...m-rr-7-0-1-galaxy-a3-2016-a3xelte-sm-t3919153

[ROM] [10/Q] [2020/06/06] [DISCONTINUED] LineageOS 17.1 for oneplus one

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
Disclaimer:
- We're not responsible for bricked devices, dead SD cards, thermonuclear war,
- or you getting fired because the alarm app failed. Please do some research
- if you have any concerns about features included in this ROM
- before flashing it! YOU are choosing to make these modifications, and if
- you blame me in any way for what happens to your device, I will laugh at you.
What is LineageOS:
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Instructions:
- Download the latest build and gapps/root and place them in your phones storage
- Reboot to twrp
- Wipe system, data, cache and dalvik
- Flash it all
- Reboot to system
- SUCCESS!
Known issues:
- You tell me
Please note:
- DO NOT report bugs if you have xposed or other than the rom original kernel
- This build is almost fully stable and its stable enough for daily use
- I recommend using opengapps (link: LINK )
- if the rom doesnt pass safetynet WITH magisk installed, go to the magisk manager settings and re-enable magisk hide (turn it off and turn it on)
Downloads:
Lastest build: https://mega.nz/file/CqhFCDBC#46Qs7xKoSYCZ6E8r3Z5FaJCIx_nqSuxLSeVy4pfW0Kw
Changelogs:
- 2019/11/11: Its the first build so nothing
- 2019/11/19: November security patches and switched to stock Q kernel for reasons (if you want the best performance like the first build flash fz kernel)
- 2019/11/22: Added ota, no need to flash updates anymore. A lot of bug fixes, wellbeing now works, FZ kernel again and new accent color that red lovers might like .
- 2019/12/2: Many bug fixes, extra customazation by lineage, this build is pretty major, you should update
- 2019/12/14: Fixed battery procentage, screen-off guestures are fixed, livedisplay is fixed, my own fixes, switched to a cleaner tree
- 2020/01/13: GPS is fixed, all customazation is fixed, lineageos 17.0 to 17.1, systemui bug is fixed and jan patches
- 2020/03/13: February security patches, lastest lineageos source, maybe the final update
- 2020/03/14: March security patches, cleaned the thread a littlebit
- 2020/04/13: April security patch, Google Camera Go prebuilt (snap is still avaible) and lineageos is officially 17.1 now (NOT THE BUILDS, THE RELEASE OF 17.1)
- 2020/06/07: June security patches, removed cam go as people can just install it themselves, bug fixes and a ton of new features introduced by the lineage team
- 2020/09/14: Discontinued as official lineage builds are out
XDA:DevDB Information
[ROM] [10/Q] [2020/06/06] [DISCONTINUED] LineageOS 17.1 for oneplus one, ROM for the OnePlus One
Contributors
ender1324, xawlw
Source Code: https://github.com/Feinzer/fz_kernel_oneplus_msm8974/tree/fz-ten
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Lastest stock firmware
Based On: AOSP
Version Information
Status: No Longer Updated
Created 2019-11-13
Last Updated 2020-09-14

ok, this is basically a non-devdb thread because xda is having some shet problems with posting, ill make it devdb later on:
CREDITS TO:
@awlw for the trees and @Thespartann for helpin
Edit: alright, a xda mod made this thread devdb, I'll wait till the devdb editing option gets fixed and fix some of the stuff like the android version of the rom being 2.3 in the thread (its not really, its android 10) and the rom being in testing state (it's stable), I will update eith November patches and oneplus guestures when lineageos merges them
Another edit: I fixed the thread, now everything is fine ^^, just gotta wait for the november patch

Am I the only person that thinks this is a Fab rom or what....
Well done to the developer

rob.d.s i9505 said:
Am I the only person that thinks this is a Fab rom or what....
Well done to the developer
Click to expand...
Click to collapse
nah, people are probably sleeping

Which Gapps To be flashed ? & is gps working ?

Bunty1924 said:
Which Gapps To be flashed ? & is gps working ?
Click to expand...
Click to collapse
Bi Gapps...my GPS is working...
---------- Post added at 08:06 AM ---------- Previous post was at 08:06 AM ----------
ender1324 said:
nah, people are probably sleeping
Click to expand...
Click to collapse
Any updates yet as November security patch

rob.d.s i9505 said:
Bi Gapps...my GPS is working...
---------- Post added at 08:06 AM ---------- Previous post was at 08:06 AM ----------
Any updates yet as November security patch
Click to expand...
Click to collapse
I am waiting for the lineage team to merge it

Bunty1924 said:
Which Gapps To be flashed ? & is gps working ?
Click to expand...
Click to collapse
GPS is working, use bitgapps or opengapps (Bitgapps link: http://www.mediafire.com/file/vbskbno8oi7d1l0/BiTGApps-arm-10.0.0-v0.5-SW_signed.zip/file )

ender1324 said:
nah, people are probably sleeping
Click to expand...
Click to collapse
I do not think so,
look at this:
ender1324 said:
ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
:laugh:

Wow nice. Going to try it soon.

ze7zez said:
I do not think so,
look at this:
:laugh:
Click to expand...
Click to collapse
feel free to read the first post and see why is it like that , and also i fixed it now

rockmadhavan said:
Wow nice. Going to try it soon.
Click to expand...
Click to collapse
Nice, report what you think

I will install this on my dead touch screen bacon
Edit: flashing is so fast, even faster than pie
Edit2: Except battery percentage can't be shown, back swipe not working in trebuchet launcher, digital wellbeing is stopping working; rest is fine, feel smooth and better than Android pie. I believe lineage source is bug because pe is running fine for most phones on Android 10. Hope lineage can fix all their bug and remove some duplicate stuff, which already supports on Android 10 such as theme

Thanhbat said:
I will install this on my dead touch screen bacon
Edit: flashing is so fast, even faster than pie
Edit2: Except battery percentage can't be shown, back swipe not working in trebuchet launcher, digital wellbeing is stopping working; rest is fine, feel smooth and better than Android pie. I believe lineage source is bug because pe is running fine for most phones on Android 10. Hope lineage can fix all their bug and remove some duplicate stuff, which already supports on Android 10 such as theme
Click to expand...
Click to collapse
Wellbeing is crashing on pie too so idk about that,
But thanks for saying and testing :good:

Just like to say.....did a thorough test yesterday on GPS,as I was out around town and it performed well....

cool! nice to see the continued lineage support!! Almost felt nostalgic while browsing the ringtone and notification sounds. Some of those tunes are there since android 1.5 or 2.1!
Otherwise seems ok. There is some (micro)stutter when scrolling or expanding the notification bar. Also traffic indicators are in the middle instead of lined up to the right. Not many settings but that was never the point of lineage. for an early build it looks pretty good!
Also a tip for the rest: (as of the time of posting) you can flash android 10 open gapps. since it greyed out on their mainpage you have to go to their sourceforge and then the beta folder where android 10 beta gapps can be found. works for me and could log in. No issues so far. flashed magisk too but both safety net checks didn't pass.

oneplusausage said:
cool! nice to see the continued lineage support!! Almost felt nostalgic while browsing the ringtone and notification sounds. Some of those tunes are there since android 1.5 or 2.1!
Otherwise seems ok. There is some (micro)stutter when scrolling or expanding the notification bar. Also traffic indicators are in the middle instead of lined up to the right. Not many settings but that was never the point of lineage. for an early build it looks pretty good!
Also a tip for the rest: (as of the time of posting) you can flash android 10 open gapps. since it greyed out on their mainpage you have to go to their sourceforge and then the beta folder where android 10 beta gapps can be found. works for me and could log in. No issues so far. flashed magisk too but both safety net checks didn't pass.
Click to expand...
Click to collapse
try magisk props config module or whatever it was called and change fingerprint to onyx, it might do something, the slutter when scrolling should be fixed in the next build i think and thanks for using it :highfive:
Edit: ok you don't actually have to use the magisk props config module, just turn magisk hide off and on and it will fix safetynet

Hello,
Thanks for the rom, it is super smooth and fast.
Some issues:
Quick charge doesn't work (origninal and aftermaket chargers)
customization doesn't work (black dark theme crashes)
override force-dark autodisables after reboot
battery life seems worse than LOS 16
Regards

For me black theme work.
Magisk and yt vanced working.
Led notification not working.
Swipe lock screen is not accurate. Sometimes I have to slide my finger a few times before unlock.
Long loading photos on galery. On Los16 works fine with the same number of pictures.
Battery profiles are removed? Or moved somewhere else?
Customize navigation buttons?
Besides that, great rom. I love bacon.

I had troubles with gestures (back gesture do not work). Also pill home button is not working (nothing happens when I choose this type of buttons), and I could not find setting to disable hardware buttons under the screen. Besides that it works ok. Google pay is not working and it said that I have rooted Phone (netflix is also not visible on Google play), but safetynet is passed

[ROM][Redmi 7A][PINE][10.0] LineageOS 17.1 [Unofficial]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
HTML:
/*
* Your warranty is now maybe void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
About project
LineageOS 17.1 (Android 10) for Redmi 7A (pine)
What's working :
•Boots
•WIFI
•Audio
•Sensors
•LED
•Hotspost
•Bluetooth
•Encryption
•Camera
•And rest things
[UPDATE-03/03/2020]
CHANGELOGS:
• Fixed in call audio
• Added support for VoLTE
Known Bugs :
•SElinux Permissive
•Expanded desktop doesn't work. LineageOS team planning to remove this feature entirely.
•APN Settings is not accessible (However, that won't cause any issues as I've included all probable APNs in my build)
Instructions
•Reboot to Recovery
•Take a full backup
•Wipe Dalvik-Cache, Cache, System, Data
•Flash the ROM
•Flash GApps (optional)
•Format Data by typing "yes"
•Flash Magisk (optional)
•Reboot to System
Downloads
ROM: lineage-17.1-20200302-UNOFFICIAL-pine.zip
GApps: Any 32 bit Gapps OpenGapps, NikGapps or BitGapps
Recovery: PitchBlack (Optional)
Magisk: Latest Magisk build (If you want root)
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
HTML:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Hit Thanks if you wanna support and like this project ;D Happy Flashing
XDA-DevDB Information
[ROM][BETA][pine][10] LineageOS 17.1, ROM for the Xiaomi Redmi 7A
Contributors
priyabratMI
YaAlex
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
ROM Firmware Required: MIUI v10.2.5.0 (MUST)
Version Information
Status: Beta
Created 2020-02-22
Last Updated 2020-03-03

Good performance
Very good battery life
Ambient display not working (23.2. image)
Great work, looking forward to a final release.

This custom ROM looks like it could be worth a try. The first post says that MIUI v10.2.5.0 firmware is required but what if the Redmi 7A is on MIUI 11? Is that okay?

You have to downgrade. Otherwise lineage will not boot.

Just wanted to use this i love lineage,running on my zuk z2...but volte is what is have to use ?

partner if I want to root in the ROM just flashes magisk? or do you need to flash another plugin? Why are there some ROMs of other computers that have magisk root to flash and another complement so that something like a permission is not brickee, in this ROM for redmi 7a it is only the magisk and it starts the system?

Been using the rom a few hours. Performing amazing! The only real issue is with the in call audio as written, everything else works amazing. Maybe the signal is a bit lower than with miui, but that's fine. Hope the call audio issue gets fixed asap! Thank you! ?
Update: bluetooth audio is also not working. Completely frozen video playback when bluetooth audio device is connected.

friend did you root? and you just flashed the magisk file or some other file other than the magisk to boot the system ??

Depressing what xda have turned into.. before more people ask, yes, root is easy, just flash magisk, no need to do anything. This is not gsi or miui rom.

GabbyWC said:
This custom ROM looks like it could be worth a try. The first post says that MIUI v10.2.5.0 firmware is required but what if the Redmi 7A is on MIUI 11? Is that okay?
Click to expand...
Click to collapse
You base firmware must be MIUI v10.2.5.0 . Otherwise, it will not boot.

DebrupGhosh said:
Just wanted to use this i love lineage,running on my zuk z2...but volte is what is have to use
Click to expand...
Click to collapse
I am working on it to fix VoLTE. Please keep patience

jason2781 said:
partner if I want to root in the ROM just flashes magisk? or do you need to flash another plugin? Why are there some ROMs of other computers that have magisk root to flash and another complement so that something like a permission is not brickee, in this ROM for redmi 7a it is only the magisk and it starts the system?
Click to expand...
Click to collapse
You can just flash Magisk to root the ROM. No need of another plugins to root it..

gingerboy92 said:
Been using the rom a few hours. Performing amazing! The only real issue is with the in call audio as written, everything else works amazing. Maybe the signal is a bit lower than with miui, but that's fine. Hope the call audio issue gets fixed asap! Thank you!
Update: bluetooth audio is also not working. Completely frozen video playback when bluetooth audio device is connected.
Click to expand...
Click to collapse
Thanks for the feedback. Will fix them soon..

jason2781 said:
friend did you root? and you just flashed the magisk file or some other file other than the magisk to boot the system ??
Click to expand...
Click to collapse
It will boot without rooting. If you want to root it , you can directly flash Magisk . Not any other files required to root it other than Magisk.

Deleted

priyabrat MI said:
I am working on it to fix VoLTE. Please keep patience
Click to expand...
Click to collapse
Thank you
Are you intending to make it official once it becomes stable?

thank you for your hard work. i was about to regret paying 30usd for this phone because of the lack of software update and 3rd party development, the good battery life is the only reason i still haven't threw it out of the window ?

gingerboy92 said:
thank you for your hard work. i was about to regret paying 30usd for this phone because of the lack of software update and 3rd party development, the good battery life is the only reason i still haven't threw it out of the window ?
Click to expand...
Click to collapse
Me2 ...miui in this device is so buggy especially indian version, that i think custom rom is much better as a daily driver than this garbage
Also who wants a spyware in their mobile!?!!

After flashing the .img file I always get a black screen even after waiting for half an hour. (Same with every rom)
Help is really really really appreciated
Thank you
Redmi 7a
Arm
Android 9
Now on mokee 9 (nightly) (only this one works for me not even aosp)

DebrupGhosh said:
Thank you
Are you intending to make it official once it becomes stable?
Click to expand...
Click to collapse
Ofc

[ROM][OFFICIAL][NIGHTLIES] LineageOS 17.1 Harpia

Reserved

Always giving thanks to @facuarmo and @Akyanonimous for the great support

Help. i tried to flash this ROM and my phone have bootloop.

I was a long term user of Pixel Experience ( Android 9 / Pie) and enjoyed it's stability. As it is no longer maintained I thought I would try out some of the latest Android 10 / Q ROMs to see how they compared. I still kept the zip file for Pixel on my SD card by way of a fall back if I wasn't happy with the latest unofficial Android 10 ROMs.
I gave Havoc OS a try for a few days and to an extent I liked it with the ability to very much set up the ROM as you like with multiple customisation options. I , however, found that the overall experience wasn't very good with quite a bit of lag and some random crashes of apps etc. I am sure with future updates it will be a much better ROM and I may well give it another try out.
After Havoc I went back to Pixel Experience for a few weeks until the next unofficial Android 10 ROM was released. Thus far I have been very happy with Lineage 17 with no bugs , lag , crashes or issues at all thus far. The only slight grumble is that the music app widget is not really required on the ' 2nd page ' and indeed was just a big black blob. I deleted it straight away. I will probably continue to use this as my daily driver for some time to come and give thanks to @jeferson1979 and any other Devs who contributed for all their hard work and for us to be able to keep our old Harpia phones going with the latest android version.

Indiawallah71 said:
I was a long term user of Pixel Experience ( Android 9 / Pie) and enjoyed it's stability. As it is no longer maintained I thought I would try out some of the latest Android 10 / Q ROMs to see how they compared. I still kept the zip file for Pixel on my SD card by way of a fall back if I wasn't happy with the latest unofficial Android 10 ROMs.
I gave Havoc OS a try for a few days and to an extent I liked it with the ability to very much set up the ROM as you like with multiple customisation options. I , however, found that the overall experience wasn't very good with quite a bit of lag and some random crashes of apps etc. I am sure with future updates it will be a much better ROM and I may well give it another try out.
After Havoc I went back to Pixel Experience for a few weeks until the next unofficial Android 10 ROM was released. Thus far I have been very happy with Lineage 17 with no bugs , lag , crashes or issues at all thus far. The only slight grumble is that the music app widget is not really required on the ' 2nd page ' and indeed was just a big black blob. I deleted it straight away. I will probably continue to use this as my daily driver for some time to come and give thanks to @jeferson1979 and any other Devs who contributed for all their hard work and for us to be able to keep our old Harpia phones going with the latest android version.
Click to expand...
Click to collapse
How you installed this ROM? Because i flash with TWRP 3.2.1-0 (the last version for Harpía) and use ARM Gapps for Android 10 but dont boot (have bootloop).

Sakul94 said:
How you installed this ROM? Because i flash with TWRP 3.2.1-0 (the last version for Harpía) and use ARM Gapps for Android 10 but dont boot (have bootloop).
Click to expand...
Click to collapse
I have indeed installed the latest Lineage 17.1 Rom and it works great. I , too , have the latest TWRP and found it very straight forward to install the zip file for Lineage , with ARM GAPPS for Android 10 and the latest Magisk for rooting my device. I assume when flashing the Rom etc you did a clean install by doing an Advanced wipe of Davlik/ART Cache , System , Data and Cache before proceeding. Good luck and hope you are able to get it going.

Indiawallah71 said:
I have indeed installed the latest Lineage 17.1 Rom and it works great. I , too , have the latest TWRP and found it very straight forward to install the zip file for Lineage , with ARM GAPPS for Android 10 and the latest Magisk for rooting my device. I assume when flashing the Rom etc you did a clean install by doing an Advanced wipe of Davlik/ART Cache , System , Data and Cache before proceeding. Good luck and hope you are able to get it going.
Click to expand...
Click to collapse
Yes, i did every step to flash this ROM but no result. The phone have bootloop.

latest TWRP for harpia is 3.2.3-r1. find that here - https://forum.xda-developers.com/devdb/project/?id=16870#downloads
try that and see if it bootloops.

bacanos said:
latest TWRP for harpia is 3.2.3-r1. find that here - https://forum.xda-developers.com/devdb/project/?id=16870#downloads
try that and see if it bootloops.
Click to expand...
Click to collapse
Thank you very much. You are an genius.

@jeferson1979 Your roms are what a rom should be! I have never thought that android 10 can run this smooth in this tiny device. All Thanks to you. Rom is very stable and is best rom available right now after AEX pie which is again your offering.
Unlike past developers your focus is more towards usage and fixing things rather than pure compiling/half baked pieces and that's what old time developing was...
Thanks to keeping this device alive. I use it because of it's light and small and easy to carry.
Now the only thing remaining is- I guess SELinux.

Thanks for all the work, I will flash this later today and post my feelings. Would it be possible to make this an official build? I loved the automatic updates via OTA from the official builds.

The ROM works great, however SELinux is not enabled, would it be possible to enable it?

Sakul94 said:
How you installed this ROM? Because i flash with TWRP 3.2.1-0 (the last version for Harpía) and use ARM Gapps for Android 10 but dont boot (have bootloop).
Click to expand...
Click to collapse
Liteh said:
The ROM works great, however SELinux is not enabled, would it be possible to enable it?
Click to expand...
Click to collapse
you can manually set SELinux to enforcing by enabling the terminal shell in the Developer options and using the command, "setenforce enforcing"
this enables enforcing but i have no idea if the SELinux policy is written or doing what it needs to be doing, and this manual enforcing only lasts until reboot. does anyone know more on this subject?

Liteh said:
The ROM works great, however SELinux is not enabled, would it be possible to enable it?
Click to expand...
Click to collapse
Selinux is on mode permissive, but you can expect next update to be on enforcing mode, by now don't turn enforcing

jeferson1979 said:
Selinux is on mode permissive, but you can expect next update to be on enforcing mode, by now don't turn enforcing
Click to expand...
Click to collapse
That's great, I'll be waiting for the next update. After a day using it, I have to say that it is indeed a wonderful ROM, very fluid and responsive.

Flashed this ROM, till now everything works great. Thank you!
Gesendet von meinem GM1903 mit Tapatalk

jeferson1979 said:
Selinux is on mode permissive, but you can expect next update to be on enforcing mode, by now don't turn enforcing
Click to expand...
Click to collapse
Can you please also release Android GO variant of Lineage. Recently I have seen one Go device, and it was so smooth even with 1GB RAM. We have 2GB so I guess Android GO will improve responsiveness and battery life slightly? Please correct me if I'm wrong.

newinnov said:
Can you please also release Android GO variant of Lineage. Recently I have seen one Go device, and it was so smooth even with 1GB RAM. We have 2GB so I guess Android GO will improve responsiveness and battery life slightly? Please correct me if I'm wrong.
Click to expand...
Click to collapse
You will see some minor improvement at memory management, but we will loose in other side. Maybe we can do some tests

I agree with newinnov. In fact i think it should be nice for the LineageOS team to keep supporting older devices (like ours) officially but in Android GO form. It would keep millions of phones out of landfills.
In our case I think the benefits overcome the loses. At this point i'm sure all of us are using our g4p for bare minimun tasks like whatsapp, email, browsing, social networking, and such. Mostly no functionality-intensive apps. Given that all of that can be done with Android GO i don't think we would lose that much

Better Mobile App

welcome