Hi,
I have Lenovo Desktop and TP-Link USB WiFi adapter TL-WN723N.
I have access to the internet via cable, but there is no surfing through WIFI Stick.
Unable to connect to WiFi adapter.
Do anyone have any ideas how to solve the problem?
Thanks.
Related
All,
I have the following situation:
I have a laptop that has a wired internet connection and I have a Archos Gen 8 tablet. The laptop and Archos both have bluetooth. The laptop is running Windows 7 Ent. and the Archos is running the latest stock firmware (2.4.19 / Android 2.2)
What I want to do:
I want to connet my Archos to the BT of the laptop and then use the laptop's internet connection to access the internet.
Does anyone know a solution for this? Searching google only results in tethering a tablet to a mobile phone or tether a laptop to a mobile phone.
Regards,
Johan
If your laptop use wire internet why don't you just buy a router and use a wireless to connect you Archos. Don't have to looking for a hard work man...
Another hand, you can access internet anytime without turn on you laptop.
Sent from my A101IT using XDA Premium App
Steven,
Thanks for the reply, but the problem is that I cannot plug in a wireless router in the places I want to use this solution (mainly at work).
Regards,
Johan
http://www.connectify.me/windows.html This might help you.
Connect your laptop with a wired connection and use your laptop as a wireless hot spot:
http://lifehacker.com/280002/turn-your-laptop-into-a-wireless-hot-spot
I've done this before and it works, similar to the poster above me!
Hi, I have a MK808 which I have connected to a usb to ethernet converter. I boot directly into XBMC, but the ethernet connection can be a little flakey. Sometimes on boot it connects to the ethernet fine but other times it doesn't and I need to go into setting and switch the ethernet off and back on and that works.
My idea is to have tasker switch the ethernet off and on just after booting so that I can be assured it would work every time, but I can't see any ethernet option in tasker does anyone know a way of doing this.
Thanks
BW
Hi People......i search a long time for an adapter, that can charge and use Usb on the Note 10.1 2014 (p600) at the same time.....no docking station do this, and all other adapters don't, cause the pins are channeled otherwise than on other devices......don't know why....but the adpater from Note Pro 10.1 with ethernet does.....but if i connect an ethernet Cable to it, nothing happens, cause (i think), Android has no Protocol to give a dhcp Adress to an ethernet device, and set the wifi Adapter off....
l found a tool for Nok 3, but I'm not sure, that will work on a P600. But on a mobile , it will not be needed as on a tablet ...
Anyone got an Idea to convert the ethernet drivers from Note Pro to the P600 kitKat ?
Sony for my ugly English
If you're rooted, this app should work: https://play.google.com/store/apps/details?id=xda.usbhost.test
I've never tried it with the Samsung branded ethernet adapter from the PRO series tablets, but I've used it in combination with an OTG cable and a generic USB to ethernet adapter, so it should work.
Thx a lot man......by the way, this is the same app, i wrote in the OP, i read about in the Note 3 Forum......i try and report
Result. ...is really strange.......the app accept the adapter, and get an ip adress...... ( it's a network Connection, coming from a router)....status gets to enabled, but i get no Internet Connection. ...strange.....i guess, Wifi have to be off. I also try to set the ip adress manually, also Router and Subnet Mask, but the same result, if i open a browser, no connection to the internet. Super SU Version is 2.02 .....any ideas?
Dear experts,
I have an issue with my Android multimedia device Orbsmart S82 which is powered by an AMLogic S802 chip. All my devices (phone, tablet, pc, NAS, orbsmart s82) are connected to the internet via Wifi.
To view HD-content on my TV, my plan was to connect my Orbsmart via ethernet cable to my NAS to receive stutter free video output. This works seamlessly. BUT: I cannot turn on Wifi and Ethernet on the Orbsmart at the same time. So each time I want to view content from my NAS, I have to go to the system settings and enable Ethernet. As Wifi gets disabled automatically by that action, I have to activate Wifi in the system settings in order to be able to view online content. But then, the ethernet interface is turned off again.
No matter what I try, only Wifi or Ethernet can be active.
Does anyone have a similar setup? What is your solution?
Thanks in advance!
In the meantime I found a possible explanation for the Orbsmart's behavior. Obviously, Android only allows one data connection at the same time per default. There seems to be a workaround if you can code. Unfortunately, I am not much of a coder...
http://stackoverflow.com/questions/18143534/android-ethernet-and-wi-fi-at-the-same-time
Any suggestions to fix this without coding are much appreciated.
I found a solution. It only works for me if I connect an Android compatible USB / Ethernet Adapter. If I configure both Wifi and Ethernet manually with different subnets, I can make both work simultaneously. I use this adapter: Assmann DN-10050-1 Digitus USB network adapter.
Cheers.
Hey guys anyone can help?
Same problem here. I replaced WiFi with Ethernet cable, but Bluetooth still doesn't work:crying: