Related
Hi,
Today i received a notification on my L22 to update to Marshmallow (310).
But when it reboots into recovery (stock), it says system update failed.
Note:
I have rooted my phone and installed custom rom before. But i used to get back to stock (both rom and recovery) with a TWRP restore. This has worked with all the previous updates of Lollipop (e.g. 130 to 150), but its not working with Marshmallow.
Can someone please help!!.
Can someone please help. I hope this is a beta version. Actually I had opted for the beta previously.
there are no restoration files zips for MM yet, alternatively, you can flash TWRP back via adb and restore your back up. else, follow the steps in thread below....good luck!
http://forum.xda-developers.com/honor-5x/help/bricked-honor-5x-t3328308
Thank you @nandakalyan @Arobase40 for the information.
I can check with them. But when i tried to login to their community, for some reason, my login credentials weren't recognized.
As an update, I tried the following
I downloaded the lollipop 150 firmware and flashed the BOOT, RECOVERY, SYSTEM and CUST image files. But I received REMOTE: COMMAND NOT ALLOWED error while flashing CUST. I even tried installing the USB/ADB drivers again. Still no luck.
Then i tried the update. Still the same error.
Again i followed step 1, then relocked the bootloader (successfully). But still got the same error. (Because i read somewhere that it could be due to modified firmware)
Looks like some issue with the package. So i might have to get back to them.
I will post the update once i get the update from them. Thank you very much guys.
Arobase40 said:
The CUST image file can't be flashed !
But I saw someone was able to rebuild the /Cust folder and its content but I'm too lazy to do the search...
It's in the Honor 5x thread.
Click to expand...
Click to collapse
That is correct, cust.img can't be flashed through ADB, I have had this issue too.
@mani0608
The only best way is to flash stock recovery, create a dload folder in the root of the sd-card, place the update.app (original firmware file) in it, boot into download mode (power + vol up + vol down) and let the whole factory image be flashed.
nandakalyan said:
That is correct, cust.img can't be flashed through ADB, I have had this issue too.
@mani0608
The only best way is to flash stock recovery, create a dload folder in the root of the sd-card, place the update.app (original firmware file) in it, boot into download mode (power + vol up + vol down) and let the whole factory image be flashed.
Click to expand...
Click to collapse
I followed this and then tried the OTA and voila it worked!!
mani0608 said:
I followed this and then tried the OTA and voila it worked!!
Click to expand...
Click to collapse
Super....congrats! Glad it worked
Hi everyone guys,I'm from Dubai.United Arab Emirates. I'm in trouble.
Maybe i bricked my phone.
I Rooted it, installed TWRP, and then i updated it not with the TWRP.
Since then i have got a bootloop issue, stuck with the Honor logo.
I can access the BOOTLOADER and the stock recovery (i tried to wipe and reset the phone here, but it do all the things and don't solve the problem) and ERecovery (same here i've got an error)
Try to put an update firmware on the MicroSD and make it run but didn't do anything, what can i do
U sure its a bootloop? First boot after update can make about 30 minutes. Anyways Flash stock recovery and try the update with the SDcard.
Demian3112 said:
U sure its a bootloop? First boot after update can make about 30 minutes. Anyways Flash stock recovery and try the update with the SDcard.
Click to expand...
Click to collapse
yes I'm sure its bootloop...
Please tell me how to I can flash stock recovery.how can I update it..
So to clarify you flashed your stock recovery, put your extracted stock firmware on your external sd card under \dload. Then you entered recovery and installed the local update and it did not work?
jonsama585 said:
So to clarify you flashed your stock recovery, put your extracted stock firmware on your external sd card under \dload. Then you entered recovery and installed the local update and it did not work?
Click to expand...
Click to collapse
I'm don't try this.
can u give me this stock recovery download link
What's the exact model ? KIW-L21C432 ?
You don't need the stock recovery, just plug the charger, then the phone will boot on erecovery (second/alternate recovery)
You need the full ROM though, not an update.
If it's a KIW-L21C432, here is the stock ROMs:
KIW-L21 B140
KIW-L21 B330
unzip the dload folder, put it on you sdcard, then bot with the three buttons pressed.
mooms said:
What's the exact model ? KIW-L21C432 ?
You don't need the stock recovery, just plug the charger, then the phone will boot on erecovery (second/alternate recovery)
You need the full ROM though, not an update.
If it's a KIW-L21C432, here is the stock ROMs:
KIW-L21 B140
KIW-L21 B330
unzip the dload folder, put it on you sdcard, then bot with the three buttons pressed.
Click to expand...
Click to collapse
After plug in charger its showing fastboot&rescue mode.
Arobase40 said:
Look at the hihonor website of your country and search for any firmware you could find for your device...
EDIT : you could try to get this one :
http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c185b130-middle-east-stock-t3408202
Click to expand...
Click to collapse
Thanks..but please tell me how to reflash it???
Thank you arobase for helping this guy out
jonsama585 said:
Thank you arobase for helping this guy out
Click to expand...
Click to collapse
need to unzip this file???
to piggy back on that he may need to extract his stock recovery from the update file, am I mistaken? Since the return to stock update to marshmallow guide does not have his stock recovery in OP.
Arobase40 said:
- Make sure you have a stock recovery
- Unzip the downloaded file
- Remove your sdcard from your phone and plug it into your computer using a sdcard reader.
- Copy the dload folder with the UPDATE.APP file to your sdcard.
- Remove your sdcard properly from your computer and plug it back to your phone.
- make sure you have enough battery, so leave your phone connected to the main power supply.
- Hold Power On+ both Volume buttons at the same time : it could be tricky to pass this process, so you may have to repeat it many times.
- Once done, the update should start !
- Once you get a success message, wait long enough until the process complete.
- You could then search for newer updates.
- Finally, stop using Cyanogenmod if you're a noob.
Click to expand...
Click to collapse
thanks..but I'm already trying it..
huawei software installing..after install 8% showing software install failed
Nahid s said:
Thanks..but please tell me how to reflash it???
Click to expand...
Click to collapse
It should be explained in a PDF file inside the zip.
edit: didn't see it was already answered....
Arobase40 said:
Can you tell us for sure if you have a stock recovery or TWRP in your phone ???
Can you also be honest and tell if you flashed CM13 ?
Click to expand...
Click to collapse
I have stock recovery..and I'm don't flashed cm13
Arobase40 said:
- Make sure you have a stock recovery
- Unzip the downloaded file
- Remove your sdcard from your phone and plug it into your computer using a sdcard reader.
- Copy the dload folder with the UPDATE.APP file to your sdcard.
- Remove your sdcard properly from your computer and plug it back to your phone.
- make sure you have enough battery, so leave your phone connected to the main power supply.
- Hold Power On+ both Volume buttons at the same time : it could be tricky to pass this process, so you may have to repeat it many times.
- Once done, the update should start !
- Once you get a success message, wait long enough until the process complete.
- You could then search for newer updates.
- Finally, stop using Cyanogenmod if you're a noob.
Click to expand...
Click to collapse
Thank you arobase40 Worked for me and my 5x is back running stock firmware again
Arobase40 said:
You're welcome !
Don't forget to push the Thank button, it doesn't hurt.
Click to expand...
Click to collapse
Ok Sir
Goodafternoon,
I tried to root my Honor 7, but failed, don't know why, was stuck in a bootloop. Then I unfortunately deleted the whole system with TWRP recovery..
Then I downloaded the current ROM from a forum called modaco which seemed to be trustworthy and extracted it with HuaweiUpdateExtractor to then install the data with fastboot. I installed everything like system, boot, data etc. and everything works fine, except for the internal storage. Normally it should have about 13 GBs, but now has less than 3. When I go to Storage in the settings, it tells me I only have 3 GB internal storage in total.
As I don't exactly know how to describe this problem and therefore don't know how to google it, I ask you. If you need some more information let me know.
Would be very kind if anybody could help me or have some advices as I am not a real genius in doing such things.
Thanks!!
Hi,
First of all, is the custom rom deodexed ?
because on stock rom ( emui ) , you juste have to go into recovery, then factory reset, with a Custom, idk
I can only tell you before trying factory reset, make a full backup, then you could try
Maxdr13 said:
Goodafternoon,
I tried to root my Honor 7, but failed, don't know why, was stuck in a bootloop. Then I unfortunately deleted the whole system with TWRP recovery..
Then I downloaded the current ROM from a forum called modaco which seemed to be trustworthy and extracted it with HuaweiUpdateExtractor to then install the data with fastboot. I installed everything like system, boot, data etc. and everything works fine, except for the internal storage. Normally it should have about 13 GBs, but now has less than 3. When I go to Storage in the settings, it tells me I only have 3 GB internal storage in total.
As I don't exactly know how to describe this problem and therefore don't know how to google it, I ask you. If you need some more information let me know.
Would be very kind if anybody could help me or have some advices as I am not a real genius in doing such things.
Thanks!!
Click to expand...
Click to collapse
After manually flashing all the .img files you should perform a force update aka three button update, by putting the same version of UPDATE.APP from which you extracted those .img files.
DigiGoon said:
After manually flashing all the .img files you should perform a force update aka three button update, by putting the same version of UPDATE.APP from which you extracted those .img files.
Click to expand...
Click to collapse
So you mean, I have to flash the phone with bootloader with the extracted files from update.app and then put it on my SD card and manually update my phone with exactly that update.app file? or am I wrong? I already tried something similar, but couldn't find the option in my honor 7 in the update settings, to manually update (I have put the update.app on my sd card).
I tried to install another ROM (MoDaCo - ROM) with hard resets etc. but didn't solve the problem.
I do exactly have 3.87 GBs of internal storage after flashing the new ROMs or update.app files. I found somebody else with the exact same problem. He solved it by hard resetting his phone with the TWRP recovery, but didn't work for me. In that forum they told him, he has some "ghost ROMs" on his phone, from flashing his phone before.
If you do have any ideas or clues for me, don't hesitate to tell me. And thanks for your help!!
Maxdr13 said:
So you mean, I have to flash the phone with bootloader with the extracted files from update.app and then put it on my SD card and manually update my phone with exactly that update.app file?
Click to expand...
Click to collapse
Yes, you have to do exactly that, flash files like cust.img, system.img, recovery.img, userdata.img(DELETES YOUR DATA), boot.img after extracting them using Huawei Extractor tool from UPDATE.APP.
After you do that follow below steps:
Put that UPDATE.APP in dload folder in your External SDCARD.
Switch off your phone.
Press the three button combo (Vol UP + Vol DOWN + Power).
After this your whole device will get flashed with that UPDATE.APP file you put in dload folder.
Try these steps, then tell me if the problem still persisits. I hope this solves it.
DigiGoon said:
Yes, you have to do exactly that, flash files like cust.img, system.img, recovery.img, userdata.img(DELETES YOUR DATA), boot.img after extracting them using Huawei Extractor tool from UPDATE.APP.
After you do that follow below steps:
Put that UPDATE.APP in dload folder in your External SDCARD.
Switch off your phone.
Press the three button combo (Vol UP + Vol DOWN + Power).
After this your whole device will get flashed with that UPDATE.APP file you put in dload folder.
Try these steps, then tell me if the problem still persisits. I hope this solves it.
Click to expand...
Click to collapse
Thanks! That's what I'll try tomorrow! I will let you know if it helped.
Maxdr13 said:
Thanks! That's what I'll try tomorrow! I will let you know if it helped.
Click to expand...
Click to collapse
Good luck!
DigiGoon said:
Good luck!
Click to expand...
Click to collapse
Sorry last question:
Currently I have the custom MoDaCo ROM installed (don't know if you know it). To follow the steps you mentioned above, do I have to get back to stock ROM first, or can I just leave ROM as it is and flash it?
Thanks.
Maxdr13 said:
Sorry last question:
Currently I have the custom MoDaCo ROM installed (don't know if you know it). To follow the steps you mentioned above, do I have to get back to stock ROM first, or can I just leave ROM as it is and flash it?
Thanks.
Click to expand...
Click to collapse
No you can leave it as it is, it will get wiped in the process.
DigiGoon said:
No you can leave it as it is, it will get wiped in the process.
Click to expand...
Click to collapse
Thank you so much, everything went fine! Great!
To update my firmware in future, I have to download the new update.app and do the 3 button update, right? Or any other way? Are OTA updates no more possible?
Thanks again :laugh:
@Maxdr13 If you are rooted, then flash manually the img files then do a three button update, but if you are on stock ROM and recovery, just dong three button update by putting UPDATE.APP in dload folder will do.
DigiGoon said:
@Maxdr13 If you are rooted, then flash manually the img files then do a three button update, but if you are on stock ROM and recovery, just dong three button update by putting UPDATE.APP in dload folder will do.
Click to expand...
Click to collapse
and userdata etc. won't be wiped with the three button update (phone is not rooted) ? is there no chance to get back to normal status so I can update with OTA?
@Maxdr13 I can't confirm about userdata, as once I did a three button update my data was intact, but some people also reported that data gets wiped, and after the three button update you will get OTAs.
DigiGoon said:
@Maxdr13 I can't confirm about userdata, as once I did a three button update my data was intact, but some people also reported that data gets wiped, and after the three button update you will get OTAs.
Click to expand...
Click to collapse
@DigiGoon thanks mate! Great help
@Maxdr13 You're welcome, always here to help.
Hi guys,
I am using the link below to perform the restore to stock from CM13 but I think I am not interpreting the questions in this post correctly.
http://forum.xda-developers.com/honor-5x/how-to/guide-kiw-l24-to-stock-t3318268
I tried to follow them to get my Honor 5x back to stock rom (while still keeping TWRP) and it was a no go. I kept getting stuck in a boot loop. I was able to immediately reflash CM13 though and get it functionaly. Would someone be kind enough to verify for me as to what steps exactly I need to follow (including ROM names, etc.)? I would greatly appreciate it.
Thanks.
@DigiGoon here's a person needing your help
I have a couple questions for you:
1) Before flashing CM13, what stock firmware version were you on? (e.g. b130, b140, b151, b331)
2) Before flashing CM13, did you take a NANDROID backup of your stock setup? Most guides have this step.
Follow these steps, and you'll get your stock ROM back.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps you.
@DigiGoon
You are a lifesaver. That seems to have done the trick. Thanks a lot man!
fistfullofbeer said:
Hi guys,
I am using the link below to perform the restore to stock from CM13 but I think I am not interpreting the questions in this post correctly.
http://forum.xda-developers.com/honor-5x/how-to/guide-kiw-l24-to-stock-t3318268
I tried to follow them to get my Honor 5x back to stock rom (while still keeping TWRP) and it was a no go. I kept getting stuck in a boot loop. I was able to immediately reflash CM13 though and get it functionaly. Would someone be kind enough to verify for me as to what steps exactly I need to follow (including ROM names, etc.)? I would greatly appreciate it.
Thanks.
Click to expand...
Click to collapse
There is also a full, latest twrp, recovery backup o.o for b331
You restore everything except data, erecovery, and recovery... 1.6 gig download o.o does the job in one fell swoop as long as you have latest twrp.
Just did this the other day...
fistfullofbeer said:
@DigiGoon
You are a lifesaver. That seems to have done the trick. Thanks a lot man!
Click to expand...
Click to collapse
Happy to help buddy.
DigiGoon said:
Follow these steps, and you'll get your stock ROM back.
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Flash all other extracted files similarly firing these commands.
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Hope this helps you.
Click to expand...
Click to collapse
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
Yes it does replace, and you simply need to reflash TWRP again
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
It replaces the TWRP, and if you are flashing stock via 3 button method, then there is no way you can keep it, but if you are getting on stock by flashing individual files then just dont flash the recovery file and you will just have the TWRP alone.
gabepaul said:
Just wondering, does this replace the TWRP recovery with stock? And is there a way to keep TWRP if so?
Click to expand...
Click to collapse
Instead of flashing full update.app , i can help u just to stop doing a lot of work after flash
DigiGoon said:
It replaces the TWRP, and if you are flashing stock via 3 button method, then there is no way you can keep it, but if you are getting on stock by flashing individual files then just dont flash the recovery file and you will just have the TWRP alone.
Click to expand...
Click to collapse
So which is the three button method and which is the other?
gabepaul said:
So which is the three button method and which is the other?
Click to expand...
Click to collapse
Three button method is nothing but by placing update.app in /sdcard/dload/
And then put off the phone followed by pressing vol down+vol up+ power button . This will let it install full stock rom and phone looks brand new in terms of software
gabepaul said:
So which is the three button method and which is the other?
Click to expand...
Click to collapse
As @gopinaidu77 said about three button method, its just that. And about the other one, in that you have to extract all the important img files from UPDATE.APP and flash it via fastboot commands.
DigiGoon said:
As @gopinaidu77 said about three button method, its just that. And about the other one, in that you have to extract all the important img files from UPDATE.APP and flash it via fastboot commands.
Click to expand...
Click to collapse
so I've tried both, and I'm getting stuck on the "Honor for the brave, powered by Android" screen.
I should probably also add that im trying to downgrade from lineage 14.0 Nougat to the android 6.1 emui 3.1
gabepaul said:
so I've tried both, and I'm getting stuck on the "Honor for the brave, powered by Android" screen.
I should probably also add that im trying to downgrade from lineage 14.0 Nougat to the android 6.1 emui 3.1
Click to expand...
Click to collapse
Sorry. 6.0.1 is emui 4.0.1 . Well bro , u can still unbrick ur device . Can i know which build number u are on before u flashed lineageos ?
gopinaidu77 said:
Sorry. 6.0.1 is emui 4.0.1 . Well bro , u can still unbrick ur device . Can i know which build number u are on before u flashed lineageos ?
Click to expand...
Click to collapse
Oh yeah, I have restored it already. I made a nandroid backup, and so when it happened, I just rebooted into fastboot and reflashed TWRP, then restored my phone from the backup. Not sure which build. Wondering what went wrong? And how I can successfully convert to stock
gabepaul said:
Oh yeah, I have restored it already. I made a nandroid backup, and so when it happened, I just rebooted into fastboot and reflashed TWRP, then restored my phone from the backup. Not sure which build. Wondering what went wrong? And how I can successfully convert to stock
Click to expand...
Click to collapse
Extract UPDATE.APP via Huawei Update Extractor tool, pull out relevant img files (system.img, boot.img, recovery.img, recovery2.img(if not in your device), cust.img) flash this one by one via fastboot by booting your device in fastboot mode, fire the given below commands.
Code:
fastboot flash <img name w/o extension> <full path to the relevant img file>
After this try the three button method, if it doesn't work then boot into eRecovery then tap "Download Latest Firmware". It will connect to Wi-Fi and will start downloading the latest firmware of your device. After the process gets completed you'll be on stock ROM with your bootloader in "Locked" state.
You are guiding wrong bro . There is a need of extension too. Else it will give error saying file not found
CUST issue
Hi,
I tried to do the same, Boot.img, system.img and recovery.img are flashed successfully but I cannot flash CUST.img, following error occurs, please help.
it says: while writing 'cust'...,
error: FAILED (remote: command not allowed)
Please help, thanks in advance.
Hi guys,
I want to flash any of the openkirin roms but when I unlock the bootloader I have no more audio/sound anymore and also I can't make any phone calls.
When making a phone call I starts dialing and it makes connection but the other person on the line can't hear me and after a while my phone gives me an error saying there is no network connection..
After this the dialer stops and the pincode screen comes up and I have to enter my pin again..
I had RROS installed, it was working fine except the volume level was a little low so I started tweaking with default_volume_tables.xml and mixer_volumes_BLANC_ce.xml. I also installed an app called "precise volume" from the play store and directly after this installation the problems started. So after i revert to stock completely..
The phone did a factory reset lowlevel because i relocked the bootloader, after it reboots and everything back to stock all was working fine again.
Then i unlocked the bootloader again and flashed RROS and the problem is there again..
So locking gives me a fully working phone, unlocking breaks functions.
Anyone that can help me with this?
U can try to relock?
wooley4766 said:
U can try to relock?
Click to expand...
Click to collapse
Yes, relocking result in a fully working phone.
But I want to run on openkirin. ?
Marcuss4 said:
Yes, relocking result in a fully working phone.
But I want to run on openkirin.
Click to expand...
Click to collapse
Have you tried re-installing firmware?
You could use TWRP with HuRUpdater.
Factory reset only wipes /data, but all other partitions are kept as they are.
Download TWRP by Pretoriano80: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
And HuRUpdater: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Easiest way for firmware is Firmware Finder app from Playstore. Search for your cust+build (for example BLA-L29C432B150, make sure you download firmware for your model and cust) and download FullOTA. Firmware is downloaded to /sdcard/TeamMT/FirmwareFinder/<versionnumbers>/
Make a new folder in /sdcard named Update, move update.zip, update_data_full_public.zip and (example, depends on your cust) update_full_BLA-L29_hw_eu.zip from the <versionnumbers> folder to the /sdcard/Update folder.
Rename update_full_BLA-L29_hw_eu.zip to update_all_hw.zip and update_data_full_public.zip to update_data_public.zip.
Place HuRUpdater zip in there as well. Reboot to TWRP and flash HuRUpdater zip and wait for installation to finish.
ante0 said:
Have you tried re-installing firmware?
You could use TWRP with HuRUpdater.
Factory reset only wipes /data, but all other partitions are kept as they are.
Download TWRP by Pretoriano80: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
And HuRUpdater: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Easiest way for firmware is Firmware Finder app from Playstore. Search for your cust+build (for example BLA-L29C432B150, make sure you download firmware for your model and cust) and download FullOTA. Firmware is downloaded to /sdcard/TeamMT/FirmwareFinder/<versionnumbers>/
Make a new folder in /sdcard named Update, move update.zip, update_data_full_public.zip and (example, depends on your cust) update_full_BLA-L29_hw_eu.zip from the <versionnumbers> folder to the /sdcard/Update folder.
Rename update_full_BLA-L29_hw_eu.zip to update_all_hw.zip and update_data_full_public.zip to update_data_public.zip.
Place HuRUpdater zip in there as well. Reboot to TWRP and flash HuRUpdater zip and wait for installation to finish.
Click to expand...
Click to collapse
Wow the one and only ante0!! ?
Thanks for your response, I will try this later today.
Will let you know if this worked!
ante0 said:
Have you tried re-installing firmware?
You could use TWRP with HuRUpdater.
Factory reset only wipes /data, but all other partitions are kept as they are.
Download TWRP by Pretoriano80: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
And HuRUpdater: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Easiest way for firmware is Firmware Finder app from Playstore. Search for your cust+build (for example BLA-L29C432B150, make sure you download firmware for your model and cust) and download FullOTA. Firmware is downloaded to /sdcard/TeamMT/FirmwareFinder/<versionnumbers>/
Make a new folder in /sdcard named Update, move update.zip, update_data_full_public.zip and (example, depends on your cust) update_full_BLA-L29_hw_eu.zip from the <versionnumbers> folder to the /sdcard/Update folder.
Rename update_full_BLA-L29_hw_eu.zip to update_all_hw.zip and update_data_full_public.zip to update_data_public.zip.
Place HuRUpdater zip in there as well. Reboot to TWRP and flash HuRUpdater zip and wait for installation to finish.
Click to expand...
Click to collapse
This worked! Thanks big time!!
Just a little off topic question..
As you are also in developing..
Do you know what sound mod is available for my device? Mate 10 pro now running on openkirin rros.
I used Ainur Sauron, i hear a clearer sound but still bt volume is low.
With my mate 9 i had the same problem but with this phone i had v4a working togerher with dolby atmos wich could boost the whole thing.
Any suggestions?
Best regards
Marcuss4 said:
This worked! Thanks big time!!
Just a little off topic question..
As you are also in developing..
Do you know what sound mod is available for my device? Mate 10 pro now running on openkirin rros.
I used Ainur Sauron, i hear a clearer sound but still bt volume is low.
With my mate 9 i had the same problem but with this phone i had v4a working togerher with dolby atmos wich could boost the whole thing.
Any suggestions?
Best regards
Click to expand...
Click to collapse
V4A relies on drivers, but AFAIK those only work on Nougat for EMUI. :/ and no other sound mod does what v4a does.
As for your earlier problem; sound xmls exist in almost all partitions, and they do the same things. If you edit/break the one it tries to load first it will keep trying to load it when unlocked = broken sound/edited file is loaded.
If you lock bootloader, dm-verity is tripped and it won't load that file at all, but will load it from another partition where is not modified.
ante0 said:
V4A relies on drivers, but AFAIK those only work on Nougat for EMUI. :/ and no other sound mod does what v4a does.
As for your earlier problem; sound xmls exist in almost all partitions, and they do the same things. If you edit/break the one it tries to load first it will keep trying to load it when unlocked = broken sound/edited file is loaded.
If you lock bootloader, dm-verity is tripped and it won't load that file at all, but will load it from another partition where is not modified.
Click to expand...
Click to collapse
I understand, thanks for the clarification.
I have learned something new!!
Next time i know what to do!!
Best regards.