Disclaimer I am not responsible for your phone bricking or anything else this rom flashes best from stock firmware do not flash this Rom from lineage 14.1 without restoring your backup an reinstalling firmware it will not work right ! Read all instructions before starting THANK YOU !!!!
Galaxy J727P
This is a updated Deodexed Rom made from the Latest firmware files J727PVPS3ARA1 build I Deodexed it added tweaks an added xposed framework an app this was made using ASSAYYED KItchen hope everyone likes it !
https://mega.nz/#!mFsE0bxa!pyEk_n4QhSxBUxAIdtX-Zc83B71kTioXTYWfeo3t-Xc
Install with the twrp of your choice I'm using twrp 3.2.1-1 now !
1 wipe data factory reset wipe system
2 flash zip
3 wipe cashe an dalvilk cashe
4 reboot give it about 5 min to boot
5 If it stop in setup pull Battery an reboot it will be fine .
6 when you are finished setting up go into xposed app an update framework if you like xposed !
6.2 If you don't want xposed go into xposed app an uninstall framework then go into Root explorer system app xposed apk an Delete apk !
7 Enjoy !!
Here is my Build with ADB enabled an encriptoin in kernel disabled same install as #1
This is a Rooted Deodexed an Tweaked with ADB enabled encrypt an DM verity Disabled for you out there that don't like Xposed same install process as the others hope you like it !!
An yes in all of these Builds knox has bin removed an security log agent too ! enjoy
Build #3 just a little lighter then the RDAV Build so enjoy !
https://mega.nz/#!rcsXCJKB!gsjdknb7A-73BfLAqWV9Ai7phxwjUURYxY3_VHA7TB8
An a big thanks out to RS.85243 for the link for the new firmware
https://www.androidfilehost.com/?w=files&flid=244089
An yes anyone that would like to use any of my Builds for a themed Rom or anyone that want to build an use my Rom as a base you have my Blessing !!
Here is a return to stock Rooted twrp flashable Rom for you if you want it !
https://mega.nz/#!3ZEFXCiY!MInpkXNZnjaPHU9hztfbVvyZskwZLk_AtNI-_sXqid4
same install an will stop in stepup just pull an replace battery an reboot !
Link to twrp
https://twrp.me/samsung/samsunggalaxyj72017qcomsprint.html
peter couniaz said:
Galaxy J727P
This is a updated Deodexed Rom made from the Latest firmware files J727PVPS3ARA1 build I Deodexed it added tweaks an added xposed framework an app this was made using ASSAYYED KItchen hope everyone likes it !
https://mega.nz/#!bB1GTRxK!QKJWri0Y4glfW1R7Qu9zdl2YJCemEPJK1NFddK2qhAI
Install with the twrp of your choice I'm using twrp 3.2.1-1 now !
1 wipe data factory reset wipe system
2 flash zip
3 wipe cashe an dalvilk cashe
4 reboot give it about 5 min to boot
5 If it stop in setup pull Battery an reboot it will be fine .
6 when you are finished setting up go into xposed app an update framework if you like xposed !
6.2 If you don't want xposed go into xposed app an uninstall framework then go into Root explorer system app xposed apk an Delete apk !
7 Enjoy !!
An a big thanks out to RS.85243 for the link for the new firmware
https://www.androidfilehost.com/?w=files&flid=244089
Click to expand...
Click to collapse
Now who is this Rom for ?
Sent from my SM-J727P using Tapatalk
Galaxy J727P
Bee101 said:
Now who is this Rom for ?
Sent from my SM-J727P using Tapatalk
Click to expand...
Click to collapse
This is for the J727P new firmware update just made a Quick DEODEXED ROM with add ADB AN REMOVE ENCRYPTION SUFF Done !
New firmware is in bottom link !
peter couniaz said:
This is for the J727P new firmware update just made a Quick DEODEXED ROM with add ADB AN REMOVE ENCRYPTION SUFF Done !
New firmware is in bottom link !
Click to expand...
Click to collapse
Take your time...no rush on my part...what is new with update...I ok with the last build.
Sent from my SM-J727P using Tapatalk
Galaxy J727P
Bee101 said:
Take your time...no rush on my part...what is new with update...I ok with the last build.
Sent from my SM-J727P using Tapatalk
Click to expand...
Click to collapse
Will do it's all good !!
virgin mobile Galaxy J727P
Bee101 said:
Take your time...no rush on my part...what is new with update...I ok with the last build.
Sent from my SM-J727P using Tapatalk
Click to expand...
Click to collapse
one last Build for this Firmware is up in OP for you that don't like Xposed Rom #3 Just put it up today 1/30/2018 . Hope you like it !!
peter couniaz said:
Galaxy J727P
This is a updated Deodexed Rom made from the Latest firmware files J727PVPS3ARA1 build I Deodexed it added tweaks an added xposed framework an app this was made using ASSAYYED KItchen hope everyone likes it !
Build # 1
https://mega.nz/#!bB1GTRxK!QKJWri0Y4glfW1R7Qu9zdl2YJCemEPJK1NFddK2qhAI
Install with the twrp of your choice I'm using twrp 3.2.1-1 now !
1 wipe data factory reset wipe system
2 flash zip
3 wipe cashe an dalvilk cashe
4 reboot give it about 5 min to boot
5 If it stop in setup pull Battery an reboot it will be fine .
6 when you are finished setting up go into xposed app an update framework if you like xposed !
6.2 If you don't want xposed go into xposed app an uninstall framework then go into Root explorer system app xposed apk an Delete apk !
7 Enjoy !!
Here is my Build with ADB enabled an encriptoin in kernel disabled same install as #1
Build # 2
https://mega.nz/#!mFsE0bxa!pyEk_n4QhSxBUxAIdtX-Zc83B71kTioXTYWfeo3t-Xc
Build #3
https://mega.nz/#!mVNTBT4K!Oa519-9wCqRndfj0JTkwNU1jS2zdw4whRKhdOZytRAs
This is a Rooted Deodexed an Tweaked with ADB enabled encrypt an DM verity Disabled for you out there that don't like Xposed same install process as the others hope you like it !!
An a big thanks out to RS.85243 for the link for the new firmware
https://www.androidfilehost.com/?w=files&flid=244089
Click to expand...
Click to collapse
This is exactly what I wanted, thank you. Just bought this phone, havnt had a deodexed rom since I had an s3 running wicked x bare bones deodexed on 4.4.2. Any other plans?
Hey whats the md5 on #3 deodex build. I have it downloaded and ready to go just need to check integrity.
Galaxy J727P
n00b-xda-disciple said:
Hey whats the md5 on #3 deodex build. I have it downloaded and ready to go just need to check integrity.
Click to expand...
Click to collapse
It all good that's my faverit #3 build should work fine but it's a flushable ZIP for twrp md5 are tar file for Odin you flash the AP BL CP an csc files threw odin if you want to go back to stock unRooted ! Thay are the latest firmware files in the bottom link ! If that's what you asking !
Need stock firmware for j727p
I did the stupidest thing. I was having a problem with adb devices unauthorize , I update udev rules ,usb on . Still did not work....so a turn usb debugging off and dev. options off then reboot. You geuss it phone will noy boot....ftp lock. Are you familar with this problem... I am guessing I still can boot to recovery ? will check that but I need stock firmware files please.
Galaxy J727P
lamike said:
I did the stupidest thing. I was having a problem with adb devices unauthorize , I update udev rules ,usb on . Still did not work....so a turn usb debugging off and dev. options off then reboot. You geuss it phone will noy boot....ftp lock. Are you familar with this problem... I am guessing I still can boot to recovery ? will check that but I need stock firmware files please.
Click to expand...
Click to collapse
Stock firmware file are in first post at the bottom ! Where I thanked the person for posting them !
Download the AP ,BL ,.CP AN CSC files an flash threw Odin ! Good luck ! If you still can boot twrp that mite be your best beat ! I just don't know ! Try flashing my #3 should turn debugging back on !
peter couniaz said:
Galaxy J727P
An a big thanks out to RS.85243 for the link for the new firmware
https://www.androidfilehost.com/?w=files&flid=244089
Click to expand...
Click to collapse
Just to be clear, is this a link for the un-rooted, completely stock rom? I went ahead and grabbed a copy of the files from the site, but I just want to be sure of what this is in case I need to flash a bare stock rom- a different "stock" rom I found was labeled for virgin mobile, but seemed to be for t-mobile or some other carrier (wouldn't recognize my sprint/vm sim to use data, but texting still worked fine)
Also- somewhat unrelated to that link but related to this post, I flashed the #3 rom and it flashed/booted successfully but it's stuck in the initial setup at "just a sec..." or what I assume is looking for updates- regardless of if I'm using wifi or data. Is there some way around this? It's been sitting there for several minutes...I've tried the home button and sliding the notification bar down but neither worked
Galaxy J727P
mehpersonguy0 said:
Just to be clear, is this a link for the un-rooted, completely stock rom? I went ahead and grabbed a copy of the files from the site, but I just want to be sure of what this is in case I need to flash a bare stock rom- a different "stock" rom I found was labeled for virgin mobile, but seemed to be for t-mobile or some other carrier (wouldn't recognize my sprint/vm sim to use data, but texting still worked fine)
Also- somewhat unrelated to that link but related to this post, I flashed the #3 rom and it flashed/booted successfully but it's stuck in the initial setup at "just a sec..." or what I assume is looking for updates- regardless of if I'm using wifi or data. Is there some way around this? It's been sitting there for several minutes...I've tried the home button and sliding the notification bar down but neither worked
Click to expand...
Click to collapse
Yes it is it is the stock firmware !!! #3 when it stop setup PULL battery an reboot it will be fine this is all in my first post !! All you had to do was follow the instructions in my post !!
peter couniaz said:
Yes it is it is the stock firmware !!! #3 when it stop setup PULL battery an reboot it will be fine this is all in my first post !! All you had to do was follow the instructions in my post !!
Click to expand...
Click to collapse
I fixed it, rebooting didn't help- I had to pull the sim card to get through the setup (with wifi turned off) then re-insert the sim after getting past that point
virgin mobile Galaxy J727P
mehpersonguy0 said:
I fixed it, rebooting didn't help- I had to pull the sim card to get through the setup (with wifi turned off) then re-insert the sim after getting past that point
Click to expand...
Click to collapse
Did you flash my Rom after Running lineage 14.1 if so that was your problem this works best if flashed from stock firmware !!!!!
QUOTE=peter couniaz;75472627]It all good that's my faverit #3 build should work fine but it's a flushable ZIP for twrp md5 are tar file for Odin you flash the AP BL CP an csc files threw odin if you want to go back to stock unRooted ! Thay are the latest firmware files in the bottom link ! If that's what you asking ![/QUOTE]
I was talking about the integrity of the download. Sometimes files get corrupted during download and after file transfers. It's the only sure way to tell if you have the same exact files you were trying to get. I use md5 checker to double check. If it's the same, flash away. If it's different, the file needs to be redownloaded. I guess I'm just spoiled by @bilgerryan , he provided an md5 for every Rom Build he posted. It's all good though. I'll backup and try it out. Cheers.
This is what md5 checker says it is.
Galaxy J727P
n00b-xda-disciple said:
This is what md5 checker says it is.
Click to expand...
Click to collapse
Ok got you that's new for me thanks !
An here is something that you mite like !
https://forum.xda-developers.com/ga...pp-touchwiz-oreo-beta-stock-launcher-t3702023
Go to mirror link an download launcher rename it TouchWizHome_2016C.apk replace you original with this an set permissions to rw-r--r-- using Rootexplorer an reboot double chick it two times before reboot !
Thank you for you hard work on this device! Without your time and skill set honestly we were at a stand still in till you saved the day. Your rooted/deodexed Roms have worked each time I used them....
Just want to personal say THANK YOU for your development and hard work on this device! Please keep at it...
Flashed and working great sir, thank you for the deodexed tweaked rom. There is still knox remnants in the build but it's completely disabled notheless; I went ahead and cleaned it up.
I'm really impressed with the added build prop tweaks. Saved me a lot of time, I was going to put a bunch of those on there after I flashed.
My only question is, did you try them all out or is there a chance some don't work? Great job man, I recommend #3 download for sure.
Related
Latest Update Of Patched AOSP Based MIUI v4 (4.1.2)
Click to expand...
Click to collapse
................................................................................................................................................................................................................
JELLY BEAN VERSION
INSTALATION GUIDE FOR FIRST TIME
1. Make sure you're rooted and on ICS bootloaders. This ROM is on android 4.1.2
2. Reboot to recovery.
3. Wipe data/Factory Reset
4. Wipe cache
5. Mounts and Storage > Format System
6. Wipe Dalvik Cache
7. Install MIUI ROM
9. Reboot & Personalize Rom as Normal & ENJOY.
NO INSTALING OF OTHER KERNEL
Click to expand...
Click to collapse
INITIAL DOWNLOADS
I777 - MIUI v4 - 3.3.1 - 4.1.zip
ADDONS
1.Gapps - JB - 2012.10.11 - MIUI - i personally dont use this gapps...i download it seprately...
2.I9100 - Language Pack - 3.2.8.zip - I have'nt tested it yet...so plz do a nandroid backup before you install this pack...as per biohazard this should work on I777
3.MIUI V5 - White.mtz - Put the MTZ file in MIUI/Themes and install it via theme manager...
Click to expand...
Click to collapse
................................................................................................................................................................................................................
BUGS & WORKAROUNDS???
TO CHANGE THE DPI - AFTER THE ROM IS SETUP PROPERLY, INSTALL ROM TOOLBOX LITE AND CHANGE THE STRING WHICH SAYS ro.sf.lcd_density
DISABLE THE ANIMATIONS IN DEVELOPERS OPTIONS TO GET SMOTH ROM USAGE
THIS SHOULD BE YOUR PRIMARY ROM. OR YOU MIGHT FACE BOOT LOOPS.
................................................................................................................................................................................................................
ALL THANKS GO TO
IXANZA - For the 4.1 discovery and porting so far.
MIUI - For the I9100 update files.
GERGUTER - For letting us know and use the updates so far.
Faryaab - For the I9100 Rom & Kernel
-BioHaZard- - For the Multi Language Pack
Lord Of Hell - For whatever way you think I helped you
badblood_antony said:
First of All I tried porting the update package to our I777.
But for some DAMN reasons it wont get past the boot screen.
So i decided to port the entire package.
**********************************************************************************************************************************************************************
Follow the Colour Codings Plz -
Green - M sure It Works.
Orange - M not sure. Maybe or Maynot Work.
Red - May god help u.
Installation Guide For first timers :
Make sure you're rooted and on ICS bootloaders. This ROM is on android 4.1.2
Reboot to recovery.
Wipe data/Factory Reset
Wipe cache
Mounts and Storage > Format System
Install MIUI ROM
Install Siyah Kernel
Please, REBOOT, and then flash Gapps.
Do NOT flash them back to back! It will cause Home button not working..!
Reboot Again
DONOT CHANGE THE KERNEL OTHER THAN PROVIDED SIYAH TILL FURTHER INFO. PLZ REPORT ANY ONE WITH ISSUES.
Update Guide :
Download the update file from the link above or from the bottom of this post.
Put it into your SDCard
Reboot to recovery
Install update through recovery
Fix Permissions
Reboot Phone
Note : You must be on the previous version to update to the latest version. EG :Update 3.1.25 requires you to be on 3.1.18
Enjoy. Once again I have just ported the Rom. I found this and I'm just Porting this for you guys.
**********************************************************************************************************************************************************************
Bugs ???
Low Sound Issue - (ISSUE RESOLVED WITH THE LATEST UPDATE)
**********************************************************************************************************************************************************************
All thanks goes to -
IXANZA - for the 4.1 discovery and porting so far.
MIUI - for the I9100 update files.
GERGUTER - for letting us know and use the updates so far.
Ktoonsez - for the awesum kernel.
Myself - for whatever way you think I helped you
**********************************************************************************************************************************************************************
Downloads -
1.
2. Siyah-I777-v7.8.5
3. gapps-jb-20121011_MIUI
Click to expand...
Click to collapse
Looking forward to trying!
:laugh:
Done Uploading...
badblood_antony said:
Done Uploading...
Click to expand...
Click to collapse
Acting a little buggy. Won't boot to lock screen. Sometimes you can get to the home screen but when you push the power button to lock the phone will restart. Just a little heads up.
gerguter said:
Acting a little buggy. Won't boot to lock screen. Sometimes you can get to the home screen but when you push the power button to lock the phone will restart. Just a little heads up.
Click to expand...
Click to collapse
Hmm...didnt encounter this still yet..
badblood_antony said:
Hmm...didnt encounter this still yet...lets work on it....
Click to expand...
Click to collapse
Strike what I said before. I think I may have done a couple of things wrong. I'll get back to ya in a few minutes.
gerguter said:
Acting a little buggy. Won't boot to lock screen. Sometimes you can get to the home screen but when you push the power button to lock the phone will restart. Just a little heads up.
Click to expand...
Click to collapse
gerguter said:
Strike what I said before. I think I may have done a couple of things wrong. I'll get back to ya in a few minutes.
Click to expand...
Click to collapse
OK...try full wipe n install this time no Gapps...cuz i never installed them myself...also this should be your primary rom. as per siyah kernel multiboot dosent work on Samsung JB..
working on the rom for some new modifications like the boot screen and lock screen in the same pack..hope it works..meanwhile uploading the new rom which shows I777
badblood_antony said:
OK...try full wipe n install this time no Gapps...cuz i never installed them myself...also this should be your primary rom. as per siyah kernel multiboot dosent work on Samsung JB..
working on the rom for some new modifications like the boot screen and lock screen in the same pack..hope it works..meanwhile uploading the new rom which shows I777
Click to expand...
Click to collapse
Everything is working good. Just got the order wrong. I was in a hurry! Thanks for the update and looking forward to more releases! I will let you know if I find anything. Again, thanks for your work!
gerguter said:
Everything is working good. Just got the order wrong. I was in a hurry! Thanks for the update and looking forward to more releases! I will let you know if I find anything. Again, thanks for your work!
Click to expand...
Click to collapse
no issues buddy...m just sharing things which help others as u do...lemme know if any bugs comes up...n m working on the updates part..take care..:good:
Great work, I'll definitely try this out! One question, more of a very general MIUI question. One of my favourite things about my current ROM is that I have a unread notification (bubble over the app icon), is there anything like that stock in MIUI or is there some theming required?
EDIT - Install failed, your prop file is funky...
EDIT 2 - I followed the instructions to the letter, and it boots up into the OS then back to boot animation...
Arcen1k said:
Great work, I'll definitely try this out! One question, more of a very general MIUI question. One of my favourite things about my current ROM is that I have a unread notification (bubble over the app icon), is there anything like that stock in MIUI or is there some theming required?
EDIT - Install failed, your prop file is funky...
EDIT 2 - I followed the instructions to the letter, and it boots up into the OS then back to boot animation...
Click to expand...
Click to collapse
Build Prop Issues: This happened to me as well. Install the kernel first and then choose the option to reboot into recovery and install the ROM. That should clear up your build prop issues.
Install: Install the ROM. Boot system. Reboot into recovery after it loads. Wipe cache partition and dalvick cahce. Reinstall kernel. Boot system. Reboot into recovery after it loads. Wipe cache partition and dalvick cache again. Install the gapps package. Boot system and enjoy!
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
Thanks for the reply gerguter...are those steps working ?? It should as I tried those same steps yesterday...it worked for me...couldn't reply as I had a morning shift as per IST...
Also I'll update the same steps in OP if any1 else have got them working...
sent from Hell using SGH-I777
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
Arcen1k said:
Great work, I'll definitely try this out! One question, more of a very general MIUI question. One of my favourite things about my current ROM is that I have a unread notification (bubble over the app icon), is there anything like that stock in MIUI or is there some theming required?
EDIT - Install failed, your prop file is funky...
EDIT 2 - I followed the instructions to the letter, and it boots up into the OS then back to boot animation...
Click to expand...
Click to collapse
Well the only notifications on apps I get is when I install go launcher along with the notification plugin and that too only on msg, calls and gmail...
sent from Hell using SGH-I777
badblood_antony said:
Thanks for the reply gerguter...are those steps working ?? It should as I tried those same steps yesterday...it worked for me...couldn't reply as I had a morning shift as per IST...
Also I'll update the same steps in OP if any1 else have got them working...
sent from Hell using SGH-I777
Click to expand...
Click to collapse
Those are the same steps I used to get everything working yesterday so I think they should work for everybody.
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
gerguter said:
Those are the same steps I used to get everything working yesterday so I think they should work for everybody.
Click to expand...
Click to collapse
Alright I have updated both the steps in the OP...
Let's continue those steps while I upload the modified ROM...should be available in couple of hrs...also I have uploaded the new screenshots of the modified ROM...
sent from Hell using SGH-I777
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
OP updated with link to new ROM build....
badblood_antony said:
OP updated with link to new ROM build....
Click to expand...
Click to collapse
Hold on...OP not getting with the link...
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
badblood_antony said:
Hold on...OP not getting with the link...
Click to expand...
Click to collapse
Uploaded the moded rom and also the latest siyah kernel..lemme know if there is any bugs..
Sent from my SGH-I777 using xda app-developers app
Does not work! Did everything by guide. Phone reboots every time! Crappy firmware! Before you upload - you need to test!
Re: [ROM][PORT][JB][AOSP][SGH-I777] MIUI v4.1 Update 3.2.8
ClubOK said:
Does not work! Did everything by guide. Phone reboots every time! Crappy firmware! Before you upload - you need to test!
Click to expand...
Click to collapse
It seems it works for all others specially me and gerguter... also m using the ROM from yesterday...haven't got even single issue...why all issue comes to u man ???
Sent from my SGH-I777 using xda app-developers app
This is a Deodexed Version Of the newest JellyBean 4.1.2 N5110UEDMD1
Kinda Bored and Noticed you guys have nothing to flash so figured id help out a bit
I currently dont have the tablet but plan on getting one soon, please let me know how it goes it should be perfect
Features:
Rooted
insecure boot.img
BusyBox
Zipaligned
Deodexed
Init.d support
adb as root
Bash
Nano
Download: http://www.androidfilehost.com/?fid=22926241640220009
md5: b5a83f9c4aecc2fee0f2bdf4784a7223
Disclaimer: nothing has been edited this is a full stock rom that you would expect to get from samsung just rooted and deodexed for easy modability,themability
Thanks to:
SamMobile - for the basefirmware package
Dsixda - for the kitchen used to deodex
ChainFire - for superSU
Reserved
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
rfb813 said:
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
Click to expand...
Click to collapse
great news i was hoping it would be good the only thing i was worried about was the update binary file but sense we have the same partitions as the note 10.1 i used a known working one and apparently all is good GREAT NEWS!! and ps thanks a bunch
This is what I am talking about flashing now
Edit: Works perfect thanks cant wait for you to get this device Mr Beanstown106
Can international version (N5100) flash this? Will I lost the 3g ability or it does not matter?
Thanks
rfb813 said:
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
Click to expand...
Click to collapse
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
shaoran_ojo said:
Can international version (N5100) flash this? Will I lost the 3g ability or it does not matter?
Thanks
Click to expand...
Click to collapse
WILL LOOSE 3g i will make a n 5100 version roday
itd be easier if u dump partitioni ask itin general
Sorry for asking here, can someone upload:
framework/framework-res.apk
usr (folder)
vendor (folder)
build.prop
bin/sdcard; rild
etc/vold.fstab
desantim said:
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
I Flashed CWM 5110 Ex#4 with Odin on my Note with auto reboot off. Rebooted into Recovery to check that I had CWM, I did and then rebooted. CWM asked if I wanted to make this my permanent recovery. I said yes. Note then rebooted. I installed Goo Manager so I could easily reboot into Recovery. Did a nandroid backup of my Note's Rom for safety, downloaded the zip file and saved it to my external sdcard (you could use your internal memory) and flashed it. Worked perfectly. I did have to reformat my 64gb sdcard to Fat32 for CWM to recognize it.
desantim said:
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
Flashed with emwno CWM #4 port http://forum.xda-developers.com/showthread.php?t=2244252
Made a backup first wipe and flash there is no progress bar at least it doesn't work properly n CWM so you just have to wait.
emwno said:
Sorry for asking here, can someone upload:
framework/framework-res.apk
usr (folder)
vendor (folder)
build.prop
bin/sdcard; rild
etc/vold.fstab
Click to expand...
Click to collapse
Emwro, here are the files from the Deodexed Rom you asked for:
https://www.dropbox.com/sh/bnxyel2l6t9lm56/X-0cOX2ZFA
beanstown106 said:
WILL LOOSE 3g i will make a n 5100 version roday
itd be easier if u dump partitioni ask itin general
Click to expand...
Click to collapse
Done, hope that help and thanks for your work
shaoran_ojo said:
Done, hope that help and thanks for your work
Click to expand...
Click to collapse
thanks will do the 5100 version when i get home from dinner
Do I need to wipe everything or just cache ?
Nanaki666 said:
Do I need to wipe everything or just cache ?
Click to expand...
Click to collapse
I just wiped cache and dalvik cache and installed.
worked fine
beanstown106 said:
thanks will do the 5100 version when i get home from dinner
Click to expand...
Click to collapse
Yeah N5100 version is much more interesting, because 8 " is portable with 330 g
rfb813 said:
I just wiped cache and dalvik cache and installed.
worked fine
Click to expand...
Click to collapse
did the same just now, working well!
Just as an aside, if you do flash this, some of the prepackaged samsung apps will detect root and will exit upon trying to run them. I dont use those apps anyway, but if you do its just a forewarning
beanstown106 said:
great news i was hoping it would be good the only thing i was worried about was the update binary file but sense we have the same partitions as the note 10.1 i used a known working one and apparently all is good GREAT NEWS!! and ps thanks a bunch
Click to expand...
Click to collapse
One of the best Roms for the S3 was developed by enewman. He started out with the base Rom like you provided and then did a cookbook approach where he provided zippable Mods for things like 4 way reboot, battery icons, etc. This allow you to flash and modify the rom to your choosing. He later developed his own Rom, the Devils Reject. But the initial effort was successful in giving us the ability to modify our Rom. Any chance we can get something like this started until you have the opportunity to develop you own Rom?
Anyone noticed samsung is going backwards with this firmware with regards to auto brightness slider?
JKAY DELUXE [I9300 JB 4.1.2]
This is a completely 100% stock rom built from the P5200XXUAMK8 base. It's in flashable zip format, but there is absolutely no tweaking done to this rom; its primary purpose is as a base for anyone wanting to build a mod rom for the P5200 3G, as well as being there for anyone who wants to return stock without odin.
As it is 100% stock it's fully bloated, odexed, and non-rooted. You can attain root by flashing root.zip (not included in this post, but it's in the main forum) thus, if you have any complaints, bring them to Samsung, not me. Flashing instructions and download link below.
Edit: I've now also posted a deodexed + rooted build. See download link below. No other changes have been made to this version besides deodex/root.
Flashing instructions:
-Full wipe (factory reset in twrp)
-flash ROM
-reboot, let sit for about 10 minutes
-You're now 100% stock. Enjoy!
Download link:
100% stock
Rooted/Deodexed
Thanks a bunch, this will save me somewhere down the road !
Thanks a bunch, this will save me somewhere down the road ! :good:
I just opened my Tab 3, 10.1 Build JDQ39.P520UEUAMK1.
So the P5200XXUAMK8 is newer?
serendipityguy said:
Thanks a bunch, this will save me somewhere down the road ! :good:
I just opened my Tab 3, 10.1 Build JDQ39.P520UEUAMK1.
So the P5200XXUAMK8 is newer?
Click to expand...
Click to collapse
I think it's just a region difference, will work just fine on your tab though, there's no difference in the internals
Just changed hosts to mediafire due to reports of problems with mega
just added a deodexed / rooted build. No other changes have been made to the second build
I have fc on galery and camera what can i do to fix them ?
Sent from my GT-P5200 using XDA Premium HD app
Lump800 said:
I have fc on galery and camera what can i do to fix them ?
Sent from my GT-P5200 using XDA Premium HD app
Click to expand...
Click to collapse
Flash stock Rom via Odin only this fix this Problem ... Have the same Problem
Sent from GT-I9305 CM11 20140131-NIGHTLY + Agni PureCM v2.6c
And after that I can flash directly the file from above?! To get rot and deodexed?
Sent from my GT-I9305 using XDA Premium 4 mobile app
Yes ... Don't forget to flash twrp ... Odin flash the stock recovery with the Firmware
Sent from GT-I9305 CM11 20140131-NIGHTLY + Agni PureCM v2.6c
Would you please make a mirror maybe at mega? I think mediafire sucks really hard. Just visit it without adblick and you know why
Max4000 said:
Would you please make a mirror maybe at mega? I think mediafire sucks really hard. Just visit it without adblick and you know why
Click to expand...
Click to collapse
hmm, strange. I have a mediafire pro account, the downloads should be direct links. Gonna contact mediafire about it
Restl3ss said:
hmm, strange. I have a mediafire pro account, the downloads should be direct links. Gonna contact mediafire about it
Click to expand...
Click to collapse
hi guys
just a question
deodexed version is flashable by recovery or by odin?
thanks in advance
I have boot loop on p5200 but i don't know what was wrong I downloaded a stock rom i flashed it with odin and it was all good but the tab keeps rebooting on samsung logo
tried to flash twr and do all the wipes but still rebooting i can access normally download and recovery mode
if i flashed ur rom will it fix this?
saba7o0o said:
I have boot loop on p5200 but i don't know what was wrong I downloaded a stock rom i flashed it with odin and it was all good but the tab keeps rebooting on samsung logo
tried to flash twr and do all the wipes but still rebooting i can access normally download and recovery mode
if i flashed ur rom will it fix this?
Click to expand...
Click to collapse
check the recovery that you are using...
where is the md5 file i downloaded the stock.zip and cant find it
Newby question
Hello, is this the correct download for unrooting my tab 3?
I have a cwg mod installed and cannot get my firmware updated by samsung software
it wont update from the tab also.
greetings wolfgang
It seems i cant download the file from the link here rapid gator net/ file /72cb51702f19de71ac6ce8dbdcfcc611
semms like it is to big to be downloaded in the free time slot...
bootloop after flashing , boots reaches galaxy tab logo then reboots again
Same here! bootloop after flashing.
TWRP 2.8.7.1
hello friend ..
I want to share GTI9152 (GALAXY MEGA DUOS) already deodex rom
I JUST MAKE THIS LOOK TO BE EASIER
DETAIL ABOUT ROM
Deodex
Base firmware I9152XWUAML3 Dec 23 2013
Slim rom 485MB
No tweak
Delete some apps that are not essential
THEME BY ME
Hiden icon signal SIM 2
Hiden tray icon SIM in the expander
Transparent expander
HOW TO INSTALL
1. Sure you have custom recovery (recomended using twrp)
2. Copy download file to sd card
3. Now go to twrp (shutdown your device – press home – vol up - power)
4. Backup your phone
5. Go wipe tab (WIPE DATA, WIPE CACHE, WIPE DALVIK)
6. Go back to home and install the rom ( select from sdcard)
7. Your just waiting up to all installation proses done.
8. Clear dalvik and chace
9. Reboot
OPTIONAL THEME S5 LOOK
DOWNLOAD ROM
How did you get it to boot after you deodexed everytime i deoodex a rom i cant get it to boot
---------- Post added at 03:17 AM ---------- Previous post was at 03:16 AM ----------
I am currently trying to port i9152Plus rom and also i9200 rom
allenjthomsen said:
How did you get it to boot after you deodexed everytime i deoodex a rom i cant get it to boot
---------- Post added at 03:17 AM ---------- Previous post was at 03:16 AM ----------
I am currently trying to port i9152Plus rom and also i9200 rom
Click to expand...
Click to collapse
I'm just trying to pull all the systems, and building a rom with android kitchen.
Im trying to get a fully deodexd rom with kernel to flash and one without kernel to flash so it updates everything and i cannot get either to boot i use android kitchen also
good job bro...finally you made it...keep it up...
allenjthomsen said:
Im trying to get a fully deodexd rom with kernel to flash and one without kernel to flash so it updates everything and i cannot get either to boot i use android kitchen also
Click to expand...
Click to collapse
try to read the logcat ...
previously I also found the same problem. This part of my results after testing several times failed.
sitifire said:
good job bro...finally you made it...keep it up...
Click to expand...
Click to collapse
thank sir..
Thanks, finaly i found something for my device. what about stability?
fazal.mehmood said:
Thanks, finaly i found something for my device. what about stability?
Click to expand...
Click to collapse
I think this is very stable: D
so far I have not found the problem, if there is a problem as soon as possible I will try to fix it.
Why my firmware is showing 4.2.2 after installing this rom?? in your screenshot it is 4.4.2..
so simple
fazal.mehmood said:
Why my firmware is showing 4.2.2 after installing this rom?? in your screenshot it is 4.4.2..
Click to expand...
Click to collapse
4.4.2 is fake..
if you want try change like 4.4.2
1. open root explorer
2. go to system
3. find file "build.prop" (open as text editor in root explorer)
4. find this line "ro.build.version.release=4.2.2" and then change 4.2.2 to what do you want
5. done -> save and exit
6. remove file "build.prop.bak"
7. reboot
Google Services error
Can't use google apps such as hangouts and google plus. Keeps saying this phone is incompatible with google play services.
ClassickWORLD said:
Can't use google apps such as hangouts and google plus. Keeps saying this phone is incompatible with google play services.
Click to expand...
Click to collapse
go here,,
http://forum.xda-developers.com/galaxy-mega/development/rom-zaizado-gt-i9152-final-t2817056
Hi Zaizado, lots of people ask a porting for mega 6.3 i9205, would you do it please?
Thanx in advance
vampirexx said:
Hi Zaizado, lots of people ask a porting for mega 6.3 i9205, would you do it please?
Thanx in advance
Click to expand...
Click to collapse
I've tried several times, but it seems impossible ..
it is caused, at least observer in the galaxy still mega primarily for series 5.8
Thank you for answer me, hope you can make it sooner or later.
zaizado said:
I've tried several times, but it seems impossible ..
it is caused, at least observer in the galaxy still mega primarily for series 5.8
Click to expand...
Click to collapse
I haven't updated yet.. but.. I hv a question th.t.. there were some games.. which r not supported by android jellybean because they required minimum android of kit kat.. so will they work after the updare of android????
layer
the file is currepted
I have got request from many users so here I have made 3minit battery mod
I have made based on N910G but it should work on other variant too.
Also it should work on odexed (wanam's) /deodexed rom too.
If you are not much knowing about how to restore /revert in case anything goes wrong Kindly make nandroid before flashing rom. Otherwise simple trick to revert is
Extract Systemui.apk and if your rom is odexed then SystemUI.odex too
And drag and drop to same file of mod in zip/system/priv-app folder and flash it.
Credits and thanks @gharrington and all battery design themes. Original topic
Download (flash from custom recovery) [KITKAT]
http://d-h.st/15h
Download [LOLLIPOP] - PS Some recovery may not able to flash this.(I am using CWM chenglu's recovery and working fine)
https://mega.co.nz/#!tJt01ToB!PbwNIN-DzI8_vFtdmdHUhjbaEr8I0cd0XgmPALkooNM
PS : If you get msg about battery setting app update then get it from official download page of 3minit and install as regular apk
http://www.3minit.com/#three
Thanks..
It works with Wanam Rom but I had to disable the circle battery from Wanam Xposed otherwise 2 battery icons on status bar.
Thanks again.
using on my t-mobile Note Edge without issue so far.
Works fine with.:
Model: SM-N910F
Version: Android 4.4.4
PDA: N910FXXU1ANK4
CSC: N910FOXA1ANK4
MODEM: N910FXXU1ANK4
Stock-Rom
Rooted
Great work :good:
best regards
can you share N910U Full screen caller ID
dr.ketan said:
I have got request from many users so here I have made 3minit battery mod
I have made based on N910G but it should work on other variant too.
Also it should work on odexed (wanam's) /deodexed rom too.
If you are not much knowing about how to restore /revert in case anything goes wrong Kindly make nandroid before flashing rom. Otherwise simple trick to revert is
Extract Systemui.apk and if your rom is odexed then SystemUI.odex too
And drag and drop to same file of mod in zip/system/priv-app folder and flash it.
Credits and thanks @gharrington and all battery design themes. Original tipic
Download (flash from custom recovery)
http://d-h.st/15h
PS: post your result on your device model so other users can get benefit.
Sent from my SM-N910G using xda premium
Click to expand...
Click to collapse
Dearr.Ketan
can you share N910U Full screen caller ID
thank you
Thanks @dr.ketan for this mod. Can i request for a mod to hide clock on lockscreen status bar & show carrier icon on status bar? Or at least please guide me how to do it. Thanks in advance.
Works perfectly on my SM910F UK handset with stock BTU ROM, rooted and flashed with Philz CWM.
Thanks so much Dr Ketan, very easy
Working for me
Works....Verizon Note 4 DE.......Thanks !!
Edit: I went back and edited my own SystemUI....now I am working with the proper SystemUI for my phone. I never had a problem with this version, my phone worked fine with it...it just had a different build and icon than my original...lol
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / StarKissed / TWRP 2.8.3.0 trltevzw
dr.ketan said:
I have got request from many users so here I have made 3minit battery mod
I have made based on N910G but it should work on other variant too.
Also it should work on odexed (wanam's) /deodexed rom too.
If you are not much knowing about how to restore /revert in case anything goes wrong Kindly make nandroid before flashing rom. Otherwise simple trick to revert is
Extract Systemui.apk and if your rom is odexed then SystemUI.odex too
And drag and drop to same file of mod in zip/system/priv-app folder and flash it.
Credits and thanks @gharrington and all battery design themes. Original topic
Download (flash from custom recovery)
http://d-h.st/15h
PS: post your result on your device model so other users can get benefit.
Sent from my SM-N910G using xda premium
Click to expand...
Click to collapse
Why do you extract the .odex file? Do you just mod the apk or are you also doing something with the odex file?
Hi everyone,
Can someone explain me how to install this on a stock rooted ROM for Note 4 please ?
Thanks
Work perfect too on stock rooted M910H. Thanks a bunch Dr. Ketan.
Sent from my SM-N910H using Tapatalk
eriedroid said:
Work perfect too on stock rooted M910H. Thanks a bunch Dr. Ketan.
Sent from my SM-N910H using Tapatalk
Click to expand...
Click to collapse
Sorry to bother you but could you please explain me how to install this on my phone?
I just need a few screen capture or explanation of what to put where please.
Thanks
Sent from my SM-N910F using XDA Free mobile app
You needs cwm /twrp recovery to flash this mod
Sent from my SM-N910G using xda premium
dr.ketan said:
You needs cwm /twrp recovery to flash this mod
Sent from my SM-N910G using xda premium
Click to expand...
Click to collapse
You mean, I just take the zip file and install it using twrp (which is the one I have)? That's all I need to do?
Thanks
Edit : I just tried and I really thank you... I'm getting old and I would have tried this a few years ago without asking ☺☺but I'm happy you told me to. Thanks, I love 3Minit.
Edit2 : I have the impression that it drains my battery.. is it the case for others ?
Sent from my SM-N910F using XDA Free mobile app
thank you very much dr ketan, works fine with my N910c stock root
Working fine on n910w8 stock odexed rom !thanks!
Hello! When I try to download the zip file my antivirus stop me because the file that I would download is not a zipfile but an exe and is infected. Can anyone reupload the zip file please? Thank you.
gius87 said:
Hello! When I try to download the zip file my antivirus stop me because the file that I would download is not a zipfile but an exe and is infected. Can anyone reupload the zip file please? Thank you.
Click to expand...
Click to collapse
turn off the antivirus , here is no problem !
ManDone.vRs said:
turn off the antivirus , here is no problem !
Click to expand...
Click to collapse
I turn off the antivirus, ok, but the downloaded file is not a zip, but a exe. Why?