Guys.. i rooted my mi a1 without disabling ita update and i have successfully unlocked the bootloader but i cant install magisk manager..it says file cant be extracted..any one help me to solve this plz..
- Device platform: arm64
- Extracting files
- Use boot image: /data/user_de/0/com.topjohnwu.magisk/install/boot.img
- Mounting /system, /vendor
- Device skip_initramfs detected
- Unpacking boot image
MagiskBoot v15.3(1531) (by topjohnwu) - Boot Image Modification Tool
Parsing boot image: [/data/user_de/0/com.topjohnwu.magisk/install/boot.img]
No boot image magic found!
! Unable to unpack boot image
Failed!
! Installation failed
Related
HELLO PEOPLE, I need your help, I have a mate 10 RNE-L23, which had the [ROM] [MorfuZ V3.4] EMUI 8.0 Kangvip Mate 10 Lite of Catuva21,
https://forum.xda-developers.com/ma...her-development/rom-emui-8-0-kangvip-mate-10- lite-t3784834
*
which gives me the fpr, in the fastboot mode close the bootloader again, but forget to install the recovery stock, then gave me this error, Error mode: error 11 no recovery, error 2 failed to load,
Help
I tried to relock my bootloader but when the device restarted it went straight to error mode.
https://forum.xda-developers.com/huawei-p9lite/help/error-mode-error-11-recovery-error-2-t3740112
buy dc-phoenix but I can not find the stock on this page for the RNE-L23
search in many pages and I have 12 different roms but at the moment of installing in (RECOVERY MODE) it stagnates in 5%
DC-PHOENIX
Looking for a device in upgrade mode
COM6: DBAdapter Reserved Interface (COM6)
COM7: Android Adapter PCUI (COM7)
16/7/2018 12:40:29 Starting to write device in UPGRADE mode...
File to update: UPDATE.APP
Current version: RNE-AL00C00B001
Validating file...
Looking for attached port...
Preparing to write...
Writing file 1 of 22: SHA256RSA...OK
Writing file 2 of 22: CRC...OK
Writing file 3 of 22: CURVER...OK
Writing file 4 of 22: VERLIST...
Error downloading file 4 of 22
EditQuote Comment Flag Like 0
#3
1 day ago
TELOKLAVO
TELOKLAVO
Junior Member
Join Date: Jul 2018 Posts: 5
Looking for a device in upgrade mode
No devices detected in upgrade mode
Looking for a device in fastboot mode
Device found: M4VDU18417000099
16/7/2018 12:55:45 Starting extracting partitions from file UPDATE.APP
Current version: RNE-AL00C00B001
Cannot create extract directory: C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\tmp\20180716_125545_UPDATE\
Extract files to directory: C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\
Extracting partition: XLOADER OK
Extracting partition: FW_LPM3 OK
Extracting partition: FASTBOOT OK
Extracting partition: MODEMNVM_UPDATE OK
Extracting partition: TEEOS OK
Extracting partition: TRUSTFIRMWARE OK
Extracting partition: SENSORHUB OK
Extracting partition: FW_HIFI OK
Extracting partition: BOOT OK
Extracting partition: RECOVERY OK
Extracting partition: RECOVERY2 OK
Extracting partition: DTS OK
Extracting partition: MODEM_FW OK
Extracting partition: SYSTEM OK
16/7/2018 13:02:37 Extracting partitions finished OK
16/7/2018 13:02:38 Starting to write device in FASTBOOT mode...
Device found: M4VDU18417000099
IMEI: 866224034319763
Build number: :MorfuZ-*ƒæ¢ 3.4
Product model: RNE-L23
Writing XLOADER partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\XLOADER.img
XLOADER partition UPDATE ...FAILED
Cannot get FBlock info from device
Cannot activate backdoor
Activating backdoor: DONE
Writing XLOADER partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\XLOADER.img
XLOADER partition UPDATE ...OK
Writing FW_LPM3 partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\FW_LPM3.img
FW_LPM3 partition UPDATE ...OK
Writing FASTBOOT partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\FASTBOOT.img
FASTBOOT partition UPDATE ...OK
Writing MODEMNVM_UPDATE partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\MODEMNVM_UPDATE.img
MODEMNVM_UPDATE partition UPDATE ...OK
Writing TEEOS partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\TEEOS.img
TEEOS partition UPDATE ...OK
Writing TRUSTFIRMWARE partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\TRUSTFIRMWARE.img
TRUSTFIRMWARE partition UPDATE ...OK
Writing SENSORHUB partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\SENSORHUB.img
SENSORHUB partition UPDATE ...OK
Writing FW_HIFI partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\FW_HIFI.img
FW_HIFI partition UPDATE ...OK
Writing BOOT partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\BOOT.img
BOOT partition UPDATE ...OK
Writing RECOVERY partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\RECOVERY.img
RECOVERY partition UPDATE ...OK
Writing RECOVERY2 partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\RECOVERY2.img
RECOVERY2 partition UPDATE ...OK
Writing DTS partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\DTS.img
DTS partition UPDATE ...OK
Writing MODEM_FW partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\MODEM_FW.img
MODEM_FW partition UPDATE ...OK
Writing SYSTEM partition with file C:\Users\Dell\Desktop\__DANIE__\RNE-L23\DC_Phoenix_v57\SYSTEM.img
SYSTEM partition UPDATE ...OK
Software written
16/7/2018 13:11:28 Writing device finished OK
Waiting for fastboot device...
Writing rescue_recovery partition with file recovery
rescue_recovery partition UPDATE ...OK
Looking for device in upgrade mode...
COM6: DBAdapter Reserved Interface (COM6)
COM7: Android Adapter PCUI (COM7)
16/7/2018 13:25:17 Starting to write device in UPGRADE mode...
File to update: UPDATE.APP
Current version: RNE-AL00C00B001
Validating file...
Looking for attached port...
Preparing to write...
Writing file 1 of 22: SHA256RSA...OK
Writing file 2 of 22: CRC...OK
Writing file 3 of 22: CURVER...OK
Writing file 4 of 22: VERLIST...
Error downloading file 4 of 22
I already consult dc-unlocker forum but I have not had an answer, if anyone could help me I would appreciate it,
on this page no logo get the rom For this specific model (RNE_L23), this for the RNE-L21 RNE-L22, can I install some of these?
+ info
Which recovery its installed? Have you flashed a firmware N or O?
Paniaguajuanm said:
Which recovery its installed? Have you flashed a firmware N or O?
Click to expand...
Click to collapse
I had installed twrp oreo, then I installed more than 12 official ROMs between nougat and oreo with DC-PHOENIX and it does not manage to install the rom completely, it continues indicating the same model of Rom
Found Phone: RNE-L23
Model: Huawei phone in fastboot mode
IMEI: 86622403xxxxxxx
Serial NR. : M4VDU184xxxxxxxx
Firmware: MorfuZ-ðŸ'½ 3.4
I think that is why it is not a base firmware because the dc-unloker page is not available for this model RNE-L23
As the title said, i'm having some errors while i try to flash something in fastboot, i'm folowing this steps:
First i open CMD (with administrator rights) or Terminal (root mode) and Type this:
Code:
adb devices
adb reboot-bootloader
My device reboot into bootloader, then i use:
Code:
Fastboot devices
Fastboot flash [partition] [path to file]
In this case: Fastboot flash recovery recovery.img
And here is where the problems begins
Code:
Fastboot flash recovery (path to the recovery.img file)
Sending 'recovery' (42834 KB) Failed (remote: 'not support "-u" option')
Fastboot: error: command failed
I do a little research about "-u" and got something about erasing a overwriting stuff so...
Code:
Fastboot erase recovery
(Everything is ok)
Fastboot flash recovery (path to the recovery file)
Sending 'recovery' (42834 KB) OKAY
Writing 'recovery' FAILED (remote: 'write partition:recovery')
Fastboot: error: Command Failed
I can't even do a Fastboot boot because of the '-U' option error...
I've tried with RKtools (because of my rk3368h chipset) and there i can flash everything succesfuly but when i try enter in recovery mode my device get stuck in the initial boot image (not the CR boot image)
So, i don't know if i'm using a wrong recovery.img or if my device is the problem. I hope someone can help me :laugh:
P.D: My device is a generic (unpopular) Android, so the only useful info that can i bring you is:
Android version is 8.1 (November 2018 security patch)
Device uses a rk3368h chipset
Bootloader is Unlocked
Obviously isn't rooted (that's why i'm trying to flash a CR)
Similar device: Teclast P10 (probably the m3f5)
And i'm trying to flash a ported TWRP (ported by ME )
That's all, thank you for reading my post and trying to help me.
Hi -
was trying to root my Note 10 lite and unfortunately i am now getting the following error. have gone back to stock firmware but anyone have any ideas why? followed these instructions androidinfotech.com/root-samsung-galaxy-note-10-lite-android-10
- Odin Mode (AVB Fail)
- vbmeta: error verifying vbmeta image: OK_NOT_Signed(3)
- vbmeta: VERIFICATION_DISABLED bit is set.
- vbmeta: NO sign info
- vbmeta
thanks
Rambam81 said:
Hi -
was trying to root my Note 10 lite and unfortunately i am now getting the following error. have gone back to stock firmware but anyone have any ideas why? followed these instructions androidinfotech.com/root-samsung-galaxy-note-10-lite-android-10
- Odin Mode (AVB Fail)
- vbmeta: error verifying vbmeta image: OK_NOT_Signed(3)
- vbmeta: VERIFICATION_DISABLED bit is set.
- vbmeta: NO sign info
- vbmeta
thanks
Click to expand...
Click to collapse
where abe to solve problem.. i am into the same situation
I am trying to install a custom ROM on a Huawei P Smart FIG-LX1. I have a system.img that i should flash to the system partition.
So when i try to flash the image i have two system partitions:
Ona named "System" and one named "System Image".
If i try flashing it to the "System" partition i get this error:
Code:
[IMAGE FLASH STARTED]
Image to flash: '/external_sd/system.img'
Calculating restore details...
E:Cannot flash images to file systems
If this can help i have wiped the system partition containing the original ROM.
useless double posts
Can't flash system images in fastboot - FAILED (remote: 'sparse flash write failure')
Hi, i am trying to install a system.img to the system partition using fastboot using fastboot flash system C:\Users\user\Desktop\system.img but when i run the command i get this error: Sending sparse 'system' 1/7 (460796 KB) OKAY [...
forum.xda-developers.com
Size of image is larger than the target device in TWRP
Hi, I am trying to flash a system image in TWRP. When i try flashing the system.img to the System Image partiton i get this error: Size of image is larger than target device How can i solve this error? I tried the resize partition option on the...
forum.xda-developers.com
Hi, i am trying to install a system.img to the system partition using fastboot using
Code:
fastboot flash system C:\Users\user\Desktop\system.img
but when i run the command i get this error:
Code:
Sending sparse 'system' 1/7 (460796 KB) OKAY [ 13.966s]
Writing 'system' FAILED (remote: 'sparse flash write failure')
fastboot: error: Command failed
i don't know if this is related to this other issue https://forum.xda-developers.com/t/...-cannot-flash-images-to-file-systems.4535981/
but i can't flash system images neither from recovery nor from fastboot (i have tried also other images).
it doesn't seem to be a memory issue because i have also used the -S option to split the image and it still doesn't work.
Help
Don't put your img file on desktop screen.Move the img file on the C drive and flash again with the right command.Hope it will be solved.
shaon121$ said:
Don't put your img file on desktop screen.Move the img file on the C drive and flash again with the right command.Hope it will be solved.
Click to expand...
Click to collapse
It still doesn't work as administrator and with the image in the C drive root.
Change your img file and try again..or download again... What is your phone model?
shaon121$ said:
Change your img file and try again..or download again... What is your phone model?
Click to expand...
Click to collapse
I have already tried different images, the phone is a Huawei P Smart FIG-LX1.
useless double posts
Can't flash system.img in TWRP - E:Cannot flash images to file systems
I am trying to install a custom ROM on a Huawei P Smart FIG-LX1. I have a system.img that i should flash to the system partition. So when i try to flash the image i have two system partitions: Ona named "System" and one named "System Image". If...
forum.xda-developers.com
Size of image is larger than the target device in TWRP
Hi, I am trying to flash a system image in TWRP. When i try flashing the system.img to the System Image partiton i get this error: Size of image is larger than target device How can i solve this error? I tried the resize partition option on the...
forum.xda-developers.com
slx23 said:
Hi, i am trying to install a system.img to the system partition using fastboot using
Code:
fastboot flash system C:\Users\user\Desktop\system.img
but when i run the command i get this error:
Code:
Sending sparse 'system' 1/7 (460796 KB) OKAY [ 13.966s]
Writing 'system' FAILED (remote: 'sparse flash write failure')
fastboot: error: Command failed
i don't know if this is related to this other issue https://forum.xda-developers.com/t/...-cannot-flash-images-to-file-systems.4535981/
but i can't flash system images neither from recovery nor from fastboot (i have tried also other images).
it doesn't seem to be a memory issue because i have also used the -S option to split the image and it still doesn't work.
Help
Click to expand...
Click to collapse
[Solved] Fastboot flash super error - FAILED (remote: 'failed to check sparse crc')
Hi, I'm getting an error trying to install stock rom from xiaomirom.com via fastboot. D:\Downloads\vili_eea_global_images_V12.5.21.0.RKDEUXM_20220224.0000.00_11.0_eea>fastboot flash super...
forum.xda-developers.com