[Q] Nabi SE ROM request (NBTY07SMKG) - Fuhu Nabi 2

Has anyone done a ROM backup (preferably scatter, but a fastboot backup may do) for these things? Been trying to get this demo unit to cooperate with SP Flash Tool lately, but I end up with a DA DOWNLOAD FAIL error. @diplomatic says this may be due to a restricted bootloader or something along the lines of it (MTK bootloaders by design are able to restrict access to SPFT afaik), but does anyone have or know how to get this off a working device?

blakegriplingph said:
Has anyone done a ROM backup (preferably scatter, but a fastboot backup may do) for these things? Been trying to get this demo unit to cooperate with SP Flash Tool lately, but I end up with a DA DOWNLOAD FAIL error. @diplomatic says this may be due to a restricted bootloader or something along the lines of it (MTK bootloaders by design are able to restrict access to SPFT afaik), but does anyone have or know how to get this off a working device?
Click to expand...
Click to collapse
Have you already tried holding volume up and/or volume down while inserting the cable? Or even disconnecting the battery? This might force it into boot ROM mode (Mediatek USB Port).

diplomatic said:
Have you already tried holding volume up and/or volume down while inserting the cable? Or even disconnecting the battery? This might force it into boot ROM mode (Mediatek USB Port).
Click to expand...
Click to collapse
Hmm, let me try that. I can more or less rule out the battery method as I have to crack this thing open i.e. heat up the touchscreen to gain access to the battery. :/

Bumping in case someone with a Nabi SE can do a ROM dump.

Anyone?

Would you be able to flash the original room if your getting bootloops after putting twrp recovery on it?

Gigabuster said:
Would you be able to flash the original room if your getting bootloops after putting twrp recovery on it?
Click to expand...
Click to collapse
Yup, and it would be prudent for you to have made an SP Flash Tool backup of the SE first before you even mess with it.

Sorry to bother. My digitizer seems a little better after wipe with twrp, but now I am unable to get system to mount to install different ROM. I know there is a backup posted but I am unsure if that will work for the se. Also, if I can find it after moving I have a twrp backup I made of nabi se if it helps with any type of development
Q is will that backup suffice for the se nabi2? running 3.0 sw I believe... Thx in advance

remarkablecow913 said:
Sorry to bother. My digitizer seems a little better after wipe with twrp, but now I am unable to get system to mount to install different ROM. I know there is a backup posted but I am unsure if that will work for the se. Also, if I can find it after moving I have a twrp backup I made of nabi se if it helps with any type of development
Q is will that backup suffice for the se nabi2? running 3.0 sw I believe... Thx in advance
Click to expand...
Click to collapse
Try flashing system.img and boot from this backup I made using SP Flash Tool, or perhaps the Flash Image feature built into TWRP:
Code:
https://www.4shared.com/rar/UzxacJrUfi/NBTY07SMKG_160823_ForFlashtool.html

Nm. I was able to download. Thank you very much for the help.
blakegriplingph said:
Try flashing system.img and boot from this backup I made using SP Flash Tool, or perhaps the Flash Image feature built into TWRP:
Click to expand...
Click to collapse

remarkablecow913 said:
Nm. I was able to download. Thank you very much for the help.
Click to expand...
Click to collapse
You're welcome!

Related

Oneplus Two - Solution for Hard Bricked Device

Hard brick for OPT happens when you change critical partitions. It will follow improper firmware flash or accidental erase of certain partitions. The phone won't show any response when hardbricked.
The solution for OPT is similar to OPO - you just need a Qualcomm driver and a recover package. The only full recovery package available is very big and it restore the phone to Hyrdogen OS, with everything wiped. So it would not be very attractive.
Fortunately, thanks to this post from Chinese supporting forum, a minimal version of restore package is provided. It does not wipe user data and guarantee a recovery entry. you would normally be freed using this package. if not, please use the full package in the end of the post
Download link for driver
Download link for Recovery tool
uncompress the files to a local folder.
First step, turn off drive signature enforcement in windows 8/8.1/10. Tutorial Here
Second step, hold the power key for 20 seconds to force turn off power. connect OPT to usb, hold volume+ and power until your PC finds a new hardware (if it doesn't work, try hold volume+ and volume- together)
Third step, go to device manager in your PC, find the new "QUALCOMM-HS USB Diagnostics 9006" device. Update its driver in property page using the Qualcomm driver provided (for 32bit windows, select x86 folder; for 64bit windows, select x64 folder).
Fourth step, when the driver is installed properly, run MSM8994DownloadTool.exe in the recover tools folder, using admin privileges . Clear start in top left corner and wait for it to finish.
Now your OPT should be able to enter TWRP recovery. It still won't boot but you can manually flash anything again (like the full Oxygen OS package).
The procedure is tested by me twice. Enjoy!
p.s: sorry the recovery image in the A2001_save_brick_mini.rar is Chinese. Please download this file, change the name to recovery.img and substitute the file in the recovery tool before flashing.
UPDATE:full Oxygen OS 150805 restoration package for those who experience recovery entry problem. Note that this package wipes everything including internal storage!
Awesome, I will go ahead and make a full recovery tool that includes these files as well as the latest version of OxygenOS as I did with the Oneplus one.
You write about a full Oxygen Package? What do you mean with it? a flashable .zip or fastboot .img?
CoreGaming said:
You write about a full Oxygen Package? What do you mean with it? a flashable .zip or fastboot .img?
Click to expand...
Click to collapse
Like i did before with my mod of the toolkit
https://forums.oneplus.net/threads/...ol-restore-stock-cm11s-fix-bricks-etc.237827/
okay and were can i get this package for the OPT?
CoreGaming said:
okay and were can i get this package for the OPT?
Click to expand...
Click to collapse
Havn't made it yet, still need to work on it. It is a little different than OPO so it might take some time.
okay this will be great. Take your time i'm ready
Hi,
anyone knows how I can force the OnePlus Two to enter QUALCOMM-HS mode?
I have a "semi-bricked" OP2.
It can boot, but the recovery is broken and I cannot enter it anymore. Worse enough, the bootloader is locked and I cannot unlock it anymore.
So I am kinda stuck and thought this manual would bring me back recovery. But - I cannot get it to enter this specific emergency recovery mode as boot loaders are intact.
Any idea?
Thanks
Andi
Lord Boeffla said:
Hi,
anyone knows how I can force the OnePlus Two to enter QUALCOMM-HS mode?
I have a "semi-bricked" OP2.
It can boot, but the recovery is broken and I cannot enter it anymore. Worse enough, the bootloader is locked and I cannot unlock it anymore.
So I am kinda stuck and thought this manual would bring me back recovery. But - I cannot get it to enter this specific emergency recovery mode as boot loaders are intact.
Any idea?
Thanks
Andi
Click to expand...
Click to collapse
Hmm, I may be able to help. Do you got a hangouts we can talk on so it could be easier? If so PM me your email so I can add you.
Zyxxeil said:
Hmm, I may be able to help. Do you got a hangouts we can talk on so it could be easier? If so PM me your email so I can add you.
Click to expand...
Click to collapse
Hi,
ok, I am one step further now.
I could bring the device in that mode, flashed via this recovery tool. All partitions were flashed but still no recovery. How can that be? ooops.
I did that many time on my OPO already successfully. But of course with the full recovery package.
So question is, I would not mind starting from scratch... anybody knows where the "big" recovery package that erases everything is available?
Thanks
Andi
Lord Boeffla said:
Hi,
ok, I am one step further now.
I could bring the device in that mode, flashed via this recovery tool. All partitions were flashed but still no recovery. How can that be? ooops.
I did that many time on my OPO already successfully. But of course with the full recovery package.
So question is, I would not mind starting from scratch... anybody knows where the "big" recovery package that erases everything is available?
Click to expand...
Click to collapse
I'm in a similar situation to you. I lost my recovery and somehow my boot loader is locked again. I can't set OEM unlock as I am on the old version of OxygenOS.
I tried the above instructions but they don't work. The phone reboots as normal, not in to recovery. If you solve this then let me know.
EDIT: I think flashing hydrogenos using this method is the best idea. We can then select the OEM unlock from developer settings, use fastboot to unlock the bootloader and flash a new recovery. The question is how? @qwsdert4
khr0n0s said:
I'm in a similar situation to you. I lost my recovery and somehow my boot loader is locked again. I can't set OEM unlock as I am on the old version of OxygenOS.
I tried the above instructions but they don't work. The phone reboots as normal, not in to recovery. If you solve this then let me know.
EDIT: I think flashing hydrogenos using this method is the best idea. We can then select the OEM unlock from developer settings, use fastboot to unlock the bootloader and flash a new recovery. The question is how? @qwsdert4
Click to expand...
Click to collapse
I am on Oxygen 2.0.1 and still do not have the option. Something is really odd...
Andi
Lord Boeffla said:
Hi,
ok, I am one step further now.
I could bring the device in that mode, flashed via this recovery tool. All partitions were flashed but still no recovery. How can that be? ooops.
I did that many time on my OPO already successfully. But of course with the full recovery package.
So question is, I would not mind starting from scratch... anybody knows where the "big" recovery package that erases everything is available?
Thanks
Andi
Click to expand...
Click to collapse
Hi, I got the "big recovery package" in question from OP support centre in China. It will recover your OPT to factory Hydrogen OS from which you could start over. I'll upload it onto Mega very soon so stay tuned.
Lord Boeffla said:
I am on Oxygen 2.0.1 and still do not have the option. Something is really odd...
Click to expand...
Click to collapse
HydrogenOS definitely has the option because it is how I flashed TWRP in the first place
khr0n0s said:
I'm in a similar situation to you. I lost my recovery and somehow my boot loader is locked again. I can't set OEM unlock as I am on the old version of OxygenOS.
I tried the above instructions but they don't work. The phone reboots as normal, not in to recovery. If you solve this then let me know.
EDIT: I think flashing hydrogenos using this method is the best idea. We can then select the OEM unlock from developer settings, use fastboot to unlock the bootloader and flash a new recovery. The question is how? @qwsdert4
Click to expand...
Click to collapse
Without recovery how do you flash hydrogenOS?
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
qwsdert4 said:
Hi, I got the "big recovery package" in question from OP support centre in China. It will recover your OPT to factory Hydrogen OS from which you could start over. I'll upload it onto Mega very soon so stay tuned.
Click to expand...
Click to collapse
Wow thanks, I was trying to do it with the one you posted but I couldn't since it was missing the info for system sectors. Now i can make my tool
Zyxxeil said:
Without recovery how do you flash hydrogenOS?
Click to expand...
Click to collapse
Using this tool and the full recovery package? Or am I missing something here?
khr0n0s said:
Using this tool and the full recovery package? Or am I missing something here?
Click to expand...
Click to collapse
The tool posted does not contain a system, but he is going to post the full one soon.
Zyxxeil said:
The tool posted does not contain a system, but he is going to post the full one soon.
Click to expand...
Click to collapse
Precisely, that is exactly what I meant. Fingers crossed that will solve this.
It could be I successfully recoverd following a hint by user @Zyxxeil (many thanks for the help).
If all works I will post soon what I did.
But - have everything running now again. Next I try to flash twrp again and root. If that worked, I will post the steps.
Andi
qwsdert4 said:
Hi, I got the "big recovery package" in question from OP support centre in China. It will recover your OPT to factory Hydrogen OS from which you could start over. I'll upload it onto Mega very soon so stay tuned.
Click to expand...
Click to collapse
Very nice. Wait for it...
Is a Version with Oxygen OS also aviable?

Problem with TWRP

EDIT: The problem is fixed, the problem was my dead SD card, as soon as I took it out and boot into TWRP the recovery has been working well. Thank you all for your help anyways.
What's going on guys, today I'm in need of some aid. Couple days ago I was trying to swap ROMs from PsyRom to FlyMeOS and when I tried to access TWRP recovery, it would get stuck on the TeamWin logo. I softbricked my phone by restoring the stock recovery and kernel (lol) and flashed the latest Fastboot ROM. Now I'm fine with MIUI8, and I flashed TRWP again (with Fastboot flash) but everytime I try to access TRWP it gives me that stuck logo or a black screen. I don't know what to do because I already tried with a rooted Dev ROM and flashify and even the TWRP Manager but I can't get anywhere. Do you know what I can do?
I've seen several TWRP versions for RN2.
Did you try with the official one?
https://dl.twrp.me/hermes/
gnazio said:
I've seen several TWRP versions for RN2.
Did you try with the official one?
https://dl.twrp.me/hermes/
Click to expand...
Click to collapse
Yes I did, and with the 2.8.7, and the other 3.0.x
Always the same result. Did Xiaomi lock the Redmi Note 2 bootloader?
kiko9895 said:
Yes I did, and with the 2.8.7, and the other 3.0.x
Always the same result. Did Xiaomi lock the Redmi Note 2 bootloader?
Click to expand...
Click to collapse
AFAIK the bootloader is not locked.
Otherwise I think that you can't even install TWRP.
I any case, I would try with an older fastboot ROM and with the official TWRP.
Have you tried this one: http://forum.xda-developers.com/redmi-note-2/general/twrp2-8-7-0-light-materialized-theme-t3308492
DarthJabba9 said:
Have you tried this one: http://forum.xda-developers.com/redmi-note-2/general/twrp2-8-7-0-light-materialized-theme-t3308492
Click to expand...
Click to collapse
Yes, it's the last one I tried, I used the one on the first link, with MIUI8 compatibility.
gnazio said:
AFAIK the bootloader is not locked.
Otherwise I think that you can't even install TWRP.
I any case, I would try with an older fastboot ROM and with the official TWRP.
Click to expand...
Click to collapse
I'm sorry but do you know where I can find an older one?
kiko9895 said:
Yes, it's the last one I tried, I used the one on the first link, with MIUI8 compatibility.
Click to expand...
Click to collapse
I am using this one: https://drive.google.com/file/d/0BwdRTuyj12_yVlJoMzJoeUJKLVE/view
I have no problem with it (MIUI8). To be honest, I don't think any of them should cause the problem that you are having. Trying to solve the problem without identifying the cause will probably prove unfruitful. How did you install the first one that you had problems with? Did it ever work at all? If so, when did it start malfunctioning?
DarthJabba9 said:
I am using this one: https://drive.google.com/file/d/0BwdRTuyj12_yVlJoMzJoeUJKLVE/view
I have no problem with it (MIUI8). To be honest, I don't think any of them should cause the problem that you are having. Trying to solve the problem without identifying the cause will probably prove unfruitful. How did you install the first one that you had problems with? Did it ever work at all? If so, when did it start malfunctioning?
Click to expand...
Click to collapse
Yes it used to work, I already tried a lot of ROMs, I had the one compatible with Android 6.0 which I flashed with TWRP itself (It worked since I flashed CM13 with it).
I don't really know when it started malfunctioning because the last time I made a backup was at least one month ago when I swapped to PsyRom (it was functioning well). But two days ago when I tried to access it to change to FlyMe it wouldn't work. Anyways I'm flashing a MIUI7 fastboot ROM to see if it works.
I'm sorry if I can't explain myself very well but I'm doing the best I can lol. Thank you for your help too.
Perhaps something messed up your file system or partitions. If all attempts don't work, then you might want to use the SP Flash Tool to flash a compatible ROM and working TWRP.
DarthJabba9 said:
Perhaps something messed up your file system or partitions. If all attempts don't work, then you might want to use the SP Flash Tool to flash a compatible ROM and working TWRP.
Click to expand...
Click to collapse
I just flashed MIUI 7 with SP Flash Tool. Gonna try and flash TWRP through fastboot and with update.zip method, see if anything works.
kiko9895 said:
I'm sorry but do you know where I can find an older one?
Click to expand...
Click to collapse
I should have a MIUI7 on my mega account, it should be the last 7 stable, saved just in case something was wrong with 8.
I can send you the link if you are still searching.
OK, I just noticed that you have solved yet.
Good, I hope that this time everything will be fine.
gnazio said:
I should have a MIUI7 on my mega account, it should be the last 7 stable, saved just in case something was wrong with 8.
I can send you the link if you are still searching.
OK, I just noticed that you have solved yet.
Good, I hope that this time everything will be fine.
Click to expand...
Click to collapse
Thank you very much for your kindness, I'm still trying tho ahah using WinDroid Toolkit now.
gnazio said:
I should have a MIUI7 on my mega account, it should be the last 7 stable, saved just in case something was wrong with 8.
I can send you the link if you are still searching.
OK, I just noticed that you have solved yet.
Good, I hope that this time everything will be fine.
Click to expand...
Click to collapse
Hello, after one month the issue is still not fixed, the recovery still hangs. Perhaps you could send me that fastboot rom you talked about please? Thank you.
I'm going to send you the link.
In the meanwhile...reading the thread again...what is "update.zip method"?
Are you try to install TWRP from Mi recovery?
This is not going to work anymore.
You should better stay with the last ROM and flash TWRP from fastboot.
This is the recovery image: https://dl.twrp.me/hermes/twrp-3.0.2-0-hermes.img
This is the guide: https://twrp.me/devices/xiaomiredminote2.html
Just start your RN2 into fastboot (vol down+power on), run fastboot flash recovery twrp.img and finally keep pressed vol up and send fastboot reboot and wait with the key pressed until it enter TWRP.
BTW:
in the official forum there should be a thread with link to all officially released ROMs for RN2.
kiko9895 said:
Hello, after one month the issue is still not fixed, the recovery still hangs. Perhaps you could send me that fastboot rom you talked about please? Thank you.
Click to expand...
Click to collapse
Here you should find every MIUI Global ROM released for RN2:
http://en.miui.com/forum.php?mod=viewthread&tid=394496
I just realized that the one I have is China version, used just to clean the phone from reseller ROM.
gnazio said:
I'm going to send you the link.
In the meanwhile...reading the thread again...what is "update.zip method"?
Are you try to install TWRP from Mi recovery?
This is not going to work anymore.
You should better stay with the last ROM and flash TWRP from fastboot.
This is the recovery image: https://dl.twrp.me/hermes/twrp-3.0.2-0-hermes.img
This is the guide: https://twrp.me/devices/xiaomiredminote2.html
Just start your RN2 into fastboot (vol down+power on), run fastboot flash recovery twrp.img and finally keep pressed vol up and send fastboot reboot and wait with the key pressed until it enter TWRP.
BTW:
in the official forum there should be a thread with link to all officially released ROMs for RN2.
Click to expand...
Click to collapse
The problem is I already tried the fastboot method as well, and the problem is always the same, stuck TWRP logo. Even if it was a partition problem, flashing the fastboot ROM should fix it, but it didn't. I tried the SP Flash Tools method too, and the flashing methods are successful, they all Flash TWRP, but when I try to access it it's stuck. I don't know why this is happening, it used to work.
@kiko9895 Sounds like you have screwed your partitions. You will need to load a full ROM using SP Tools to correct it as this is the only way to set the partitions back at their correct memory locations. Fastboot and Recovery rewrite the partitions by name not memory location so any fault in that will never be fixed. If you have flashed an Android 6.0 based ROM or something intended for another model phone, this will definitely be the case. Anyone flashing custom ROMs should first gather the skills and tools to recover from disasters - luckily, MTK based phones are virtually unbrickable!
As far as the "official" TWRP goes, it is not official and not a good version. It is just someone who has used the TWRP build server to knock out a random version. How does that make it "official"?
jajk said:
@kiko9895 Sounds like you have screwed your partitions. You will need to load a full ROM using SP Tools to correct it as this is the only way to set the partitions back at their correct memory locations. Fastboot and Recovery rewrite the partitions by name not memory location so any fault in that will never be fixed. If you have flashed an Android 6.0 based ROM or something intended for another model phone, this will definitely be the case. Anyone flashing custom ROMs should first gather the skills and tools to recover from disasters - luckily, MTK based phones are virtually unbrickable!
As far as the "official" TWRP goes, it is not official and not a good version. It is just someone who has used the TWRP build server to knock out a random version. How does that make it "official"?
Click to expand...
Click to collapse
Ahah I have the skills and the tools, I've been flashing ROMs for more than two years. This never happened before. If you read what I said before on this thread, you'll see that I already flashed a new ROM through SP Flash Tools. And yes I flashed a 6.0 rom before so that must be the problem, but since I already flashed a fastboot rom through SP Flash Tools I can't see where the problem is. The partitions should be fixed by now but that isn't the case.
@kiko9895 Sorry if it sounded like I was coming down hard on you. You should only need to flash a matching preloader, uboot, logo plus TWRP recovery using SP Flash Tools with the correct scatter file to get back into booting to TWRP. Any other problems can be sorted from there.
I will attach a known good scatter file because I know there are several floating around that will reverse one or two partitions on you (such as the RN3 version)

Mi Box 3S (MDZ-19-AA) broken boot (brick)

Hi everyone i have a problem (not only me). I think erased bootloader I tried a lot of ways to restore but nothing helped((( the only one in my opinion is the option to using usb burning tool (like mdz-16 JurassicPark) but I do not have the firmware and i cant find it((( So someone know where i can find it? Or someone can to make it? thanks
danilatrip said:
Hi everyone i have a problem (not only me). I think erased bootloader I tried a lot of ways to restore but nothing helped((( the only one in my opinion is the option to using usb burning tool (like mdz-16 JurassicPark) but I do not have the firmware and i cant find it((( So someone know where i can find it? Or someone can to make it? thanks
Click to expand...
Click to collapse
Such an .img file does not exist. Your only solution is to use recovery mode and flash a current update.zip file.
bigtalker said:
Such an .img file does not exist. Your only solution is to use recovery mode and flash a current update.zip file.
Click to expand...
Click to collapse
how to use recovery mode if the box does not turn on and therefore does not go into recovery?
And you leave out this trivial detail, hoping for a miracle.
Based on that, it is clearly dead, gone, vermisht, machula, muerto, chugoseyo.....

Question Lost IMEI after root

Hello all, I was asking if you can help me with an issue here.
While trying to root my Nord 2, I flashed the wrong boot.img version (A.10, while I was already update at the A.11), losing my WiFi and Bluetooth. So to recover them, I flashed the Full A.07 firmware and went back up to A.11 flashing the various OTAs. After flashing the A.07 firmware though, I've lost IMEI and Cellular functionality, and was never able to recover them.
I've done a backup of my nvram, nvdata, and nvcfg partitions before flashing, but restoring them didn't solve the issue.
I've use this guide for root: https://forum.xda-developers.com/t/root-tool-oneplus-nord-2-oxygen-11-3-dn2103_11_a-xx-eea.4332959/
And this guide to flash A.07 and OTAs: https://forum.xda-developers.com/t/oneplus-nord-2-oxygen-11-3-dn2103-eea-rom.4331695/
Does someone have any hints? Or should I send it back to Oneplus?
Raygen said:
Hello all, I was asking if you can help me with an issue here.
While trying to root my Nord 2, I flashed the wrong boot.img version (A.10, while I was already update at the A.11), losing my WiFi and Bluetooth. So to recover them, I flashed the Full A.07 firmware and went back up to A.11 flashing the various OTAs. After flashing the A.07 firmware though, I've lost IMEI and Cellular functionality, and was never able to recover them.
I've done a backup of my nvram, nvdata, and nvcfg partitions before flashing, but restoring them didn't solve the issue.
I've use this guide for root: https://forum.xda-developers.com/t/root-tool-oneplus-nord-2-oxygen-11-3-dn2103_11_a-xx-eea.4332959/
And this guide to flash A.07 and OTAs: https://forum.xda-developers.com/t/oneplus-nord-2-oxygen-11-3-dn2103-eea-rom.4331695/
Does someone have any hints? Or should I send it back to Oneplus?
Click to expand...
Click to collapse
You done the mess even I creted simple twrp and root method you choosed the patched boot.img way and This happened.
Try to restore your full backup of nandroid using twrp. Or fist install twrp and flash non patched boot images using twrp itself
pankspoo said:
You done the mess even I creted simple twrp and root method you choosed the patched boot.img way and This happened.
Try to restore your full backup of nandroid using twrp. Or fist install twrp and flash non patched boot images using twrp itself
Click to expand...
Click to collapse
Yeah I saw there was 2 different guides, I went with the newer one but it wasn't the right choice.
Already tried flashing a stock boot image, no change. Didn't do a Nandroid backup before hand, that's my bad.
Raygen said:
Yeah I saw there was 2 different guides, I went with the newer one but it wasn't the right choice.
Already tried flashing a stock boot image, no change. Didn't do a Nandroid backup before hand, that's my bad.
Click to expand...
Click to collapse
Try all boot images and test it
File folder on MEGA
mega.nz
Must work with anyone
sakarya1980 said:
Try all boot images and test it
File folder on MEGA
mega.nz
Must work with anyone
Click to expand...
Click to collapse
Those images are the first I've tried. I've then tried with the stock boot image linked in @pankspoo post, but with still no result. My guess is that flashing V.07 on top of V.11 rewrited some others partitions that should have not be touched
Well i am not happy to tell you, but if its true that partitions containing IMEI and WiFi connections got overwritten with nonsense information then the only thing that could save your phone is full nandroid backup which you do not have. And unfortunetly dont expect anyone else to provide it as that would mean that those 2 phones would have the same IMEI and MAC address.
I would suggest that you flash stock image, lock your bootloader and send it for RMA saying that you dont know what happened. You will have like 50/50 chance that they will just replace your motherboard without much of an investigation.
Raygen said:
Those images are the first I've tried. I've then tried with the stock boot image linked in @pankspoo post, but with still no result. My guess is that flashing V.07 on top of V.11 rewrited some others partitions that should have not be touched
Click to expand...
Click to collapse
If you have europe Version of nord2, flash Version v07, then update with otas to v09, v10, v11 with twrp
@Raygen did you get through with your imei repair? i have a similar issue.
BusterCZ said:
Well i am not happy to tell you, but if its true that partitions containing IMEI and WiFi connections got overwritten with nonsense information then the only thing that could save your phone is full nandroid backup which you do not have. And unfortunetly dont expect anyone else to provide it as that would mean that those 2 phones would have the same IMEI and MAC address.
I would suggest that you flash stock image, lock your bootloader and send it for RMA saying that you dont know what happened. You will have like 50/50 chance that they will just replace your motherboard without much of an investigation.
Click to expand...
Click to collapse
Yeah, I've already contacted OnePlus and I'm waiting for an RMA.
There's just a catch: I'm not able to re-lock the bootloader without getting the "boot image is corruptd" error. But I hope it's not an issue if I send it back all stock, with just the bootloader unlocked.
sakarya1980 said:
If you have europe Version of nord2, flash Version v07, then update with otas to v09, v10, v11 with twrp
Click to expand...
Click to collapse
Tried two times already, no change.
Keden said:
@Raygen did you get through with your imei repair? i have a similar issue.
Click to expand...
Click to collapse
Send it back to OnePlus sadly.
Raygen said:
Yeah, I've already contacted OnePlus and I'm waiting for an RMA.
There's just a catch: I'm not able to re-lock the bootloader without getting the "boot image is corruptd" error. But I hope it's not an issue if I send it back all stock, with just the bootloader unlocked.
Tried two times already, no change.
Send it back to OnePlus sadly.
Click to expand...
Click to collapse
Did any way you can flash stock. Firmware using sp flash tool of mediatek just like qualcoms MSM tool used for hardbricked devices
Raygen said:
Yeah, I've already contacted OnePlus and I'm waiting for an RMA.
There's just a catch: I'm not able to re-lock the bootloader without getting the "boot image is corruptd" error. But I hope it's not an issue if I send it back all stock, with just the bootloader unlocked.
Click to expand...
Click to collapse
Well my guess is that if they take a look at it and the bootloader will be unlocked they will send it back to you rejacted. Atleast that was my expirience once with my old Xiaomi phone. So probably try flashing original firmware using some kind of recovery utility such as Sp flash to help get rid of this message?
pankspoo said:
Did any way you can flash stock. Firmware using sp flash tool of mediatek just like qualcoms MSM tool used for hardbricked devices
Click to expand...
Click to collapse
BusterCZ said:
Well my guess is that if they take a look at it and the bootloader will be unlocked they will send it back to you rejacted. Atleast that was my expirience once with my old Xiaomi phone. So probably try flashing original firmware using some kind of recovery utility such as Sp flash to help get rid of this message?
Click to expand...
Click to collapse
I would like to use Sp flash but I don't know where I could find the files for the Nord 2 to use with it. Like the scatter file and the firmware in Raw format
Keden said:
@Raygen did you get through with your imei repair? i have a similar issue.
Click to expand...
Click to collapse
Might help ! Check,.
U need to get UMT dongle , Ultimate Multi tool software.

[Solved] Need help with SDMC DV8519 (bootloop)

Hello, I'm fairly new here. I've tried flashing TWRP to my Android TV box, but now it's just constantly rebooting over and over again. How do i fix that? How do i access the recovery mode?
TV Box: https://www.androidtv-guide.com/pay-tv-provider/united-group-eon-ott-smart-box/
Fzloop said:
Hello, I'm fairly new here.
Click to expand...
Click to collapse
Fairly? You joined yesterday. You could hardly be fairer.
Fzloop said:
I've tried flashing TWRP to my Android TV box, but now it's just constantly rebooting over and over again.
Click to expand...
Click to collapse
The good news is that since it is bootlooping, the bootloader is probably okay.
For this model device running android 9, neither of the bootable partitions can be modified (while still running the original bootloader), even if the bootloader is unlocked, without causing a signature check failure. Since flashing some twrp version has modified the recovery partition, which is a bootable partition, the signature check is failing.
Fzloop said:
How do i fix that?
Click to expand...
Click to collapse
One way is to flash the original recovery partition back to the device using burn mode.
Fzloop said:
How do i access the recovery mode?
Click to expand...
Click to collapse
By holding the button on the device. You'll need the worldcup drivers and command line "update" burn mode tool (not the GUI burning tool).
If you have a copy of the original recovery partition, you'd just flash that with the update tool and be done.
If you don't have a copy of the original recovery partition, you can use the update tool to dump a different partition, like system, in order to learn which version of the firmware is installed on your box. Report the version here, and maybe some member will have the matching recovery partition that you can flash to your device using the update tool.
goapy said:
Fairly? You joined yesterday. You could hardly be fairer.
The good news is that since it is bootlooping, the bootloader is probably okay.
For this model device running android 9, neither of the bootable partitions can be modified (while still running the original bootloader), even if the bootloader is unlocked, without causing a signature check failure. Since flashing some twrp version has modified the recovery partition, which is a bootable partition, the signature check is failing.
One way is to flash the original recovery partition back to the device using burn mode.
By holding the button on the device. You'll need the worldcup drivers and command line "update" burn mode tool (not the GUI burning tool).
If you have a copy of the original recovery partition, you'd just flash that with the update tool and be done.
If you don't have a copy of the original recovery partition, you can use the update tool to dump a different partition, like system, in order to learn which version of the firmware is installed on your box. Report the version here, and maybe some member will have the matching recovery partition that you can flash to your device using the update tool.
Click to expand...
Click to collapse
I did join yesterday, but I've been using this forum for a while without posting.
I managed to fix the box on my own, turns out all i needed was an SD card and a ROM.
Fzloop said:
I managed to fix the box on my own, turns out all i needed was an SD card and a ROM.
Click to expand...
Click to collapse
An alternative ROM, or the original ROM?
If you installed an alternative ROM, you may have "fixed" your box, but you've also blown away your drm keys forever.
If you're happy with the result, that's all that matters.
Although you could have posted that your issue had been resolved. That would have saved me from wasting my time. I always regret replying to posts about the dv8519. This is the last one for me.
goapy said:
An alternative ROM, or the original ROM?
If you installed an alternative ROM, you may have "fixed" your box, but you've also blown away your drm keys forever.
If you're happy with the result, that's all that matters.
Although you could have posted that your issue had been resolved. That would have saved me from wasting my time. I always regret replying to posts about the dv8519. This is the last one for me.
Click to expand...
Click to collapse
Unfortunately, alternative. I'm still looking for the original.
My apologies for wasting your time. Have a great day.
Fzloop said:
Unfortunately, alternative. I'm still looking for the original.
My apologies for wasting your time. Have a great day.
Click to expand...
Click to collapse
Hi @Fzloop,
can you share the ROM?
xfenixxx said:
Hi @Fzloop,
can you share the ROM?
Click to expand...
Click to collapse
BoskoWifiBT
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Worked fine at first, but after playing with it a bit more the box just wouldn't boot, so be careful.
Fzloop said:
BoskoWifiBT
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Worked fine at first, but after playing with it a bit more the box just wouldn't boot, so be careful.
Click to expand...
Click to collapse
Thank you very much, I'll still give it a try.
Hello, I've tried flashing TWRP to my Android TV box, but now it's just constantly rebooting over and over again. How do i fix that? How do i access the recovery mode?
TV BOX https://www.androidtv-guide.com/pay-tv-provider/dhiraagu-tv-joybox/
box connected AMLOGIC usb burn tool. but error uboot/getresult/Diskinitial error

Categories

Resources