Ok I took the chance in flashing my SM-N950U to the U1 firmware using Prince Odin and it worked. Be sure that both firmwares are bootloader v3 or you WILL BRICK also as a safe precaution i deleted my google accounts and any that controls the FRP so that it would be off.
BigHussle said:
Ok I took the chance in flashing my SM-N950U to the U1 firmware using Prince Odin and it worked. Be sure that both firmwares are bootloader v3 or you WILL BRICK
Click to expand...
Click to collapse
Which U1 firmware did you flash? And what firmware were you previously on?
So does that mean this whole "you can't cross flash between U and U1" thing has been debunked? It was just an issue with people trying to flash a lower level bootloader?
Edit: looks like it: https://forum.xda-developers.com/ga...block-carrier-switching-t3742409/post75423088
andrewNY said:
So does that mean this whole "you can't cross flash between U and U1" thing has been debunked? It was just an issue with people trying to flash a lower level bootloader?
Edit: looks like it: https://forum.xda-developers.com/ga...block-carrier-switching-t3742409/post75423088
Click to expand...
Click to collapse
Yes, just stick to BL 3 if you are on it and you are good.
Gus194 said:
Which U1 firmware did you flash? And what firmware were you previously on?
Click to expand...
Click to collapse
I was on AT&T 3BRA8 on a Note 8 I got from AT&T I deleted my google accounts from the device before doing the flash.
confirming. went from 3CRAE(oreo) to 3BRA5(U1) using prince odin.
guaneet said:
confirming. went from 3CRAE(oreo) to 3BRA5(U1) using prince odin.
Click to expand...
Click to collapse
Were you nervous watching it install. I was sweatin the whole time
BigHussle said:
Were you nervous watching it install. I was sweatin the whole time
Click to expand...
Click to collapse
Yeah. Funny thing is, I was doing this on my laptop which died halfway through the Odin. I just rebooted back into download mode and reflashed. I was almost in tears
What is the difference between u and u1?
guaneet said:
Yeah. Funny thing is, I was doing this on my laptop which died halfway through the Odin. I just rebooted back into download mode and reflashed. I was almost in tears
Click to expand...
Click to collapse
That happened to me once. But I have a spare phone now
Jay5583 said:
What is the difference between u and u1?
Click to expand...
Click to collapse
U is for the US carrier branded phones (950U) and has the carrier bloat added on top of what is downloaded during setup. The U1 (950U1) is for the US unlocked unbranded phones sold at Best Buy and others. That has no carrier bloat added and what is automatically downloaded depending on what sim you have can be uninstalled instead of disabled. The downside to U1 is you will be missing some carrier specific enhancements like VVM for Verizon and other features. But with that said there are some apps and features that are not hidden on the U1. I have a U1 and prefer the cleaner software it has.
Jay5583 said:
What is the difference between u and u1?
Click to expand...
Click to collapse
U is all US carrier
U1 is unlocked
Nevermind, figured it out!
Related
So I tried to root my phone and screwed it up (it was stuck on the Samsung boot screen).
Then I installed TWRP to try and recover it, but being the idiot I am I just ended up deleting the OS.
Now I don't know what to do, please help me.
Edit:
I have managed to fix this with the help of a user below!
What I did (for other users having this issue):
I downloaded the firmware for my device from Updato (link here).
Then used Odin 3 (version 3.12) and loaded the downloaded firmware into the AP slot.
I had to plug my device into the wall to allow it to charge (connecting it directly to my PC did not work), then I booted it up (it was stuck in the Samsung logo screen for a long while, but then it went into the setup).
DNeeded said:
So I tried to root my phone and screwed it up (it was stuck on the Samsung boot screen).
Then I installed TWRP to try and recover it, but being the idiot I am I just ended up deleting the OS.
Now I don't know what to do, please help me.
Click to expand...
Click to collapse
Use ADB file transfer using the fast boot command line. Then download a flashable zip rom and push it to your device then flash, you also want to get gapps if you want to have Google play.
Sent from my iPhone using Tapatalk
doughmay said:
Use ADB file transfer using the fast boot command line. Then download a flashable zip rom and push it to your device then flash, you also want to get gapps if you want to have Google play.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi man.
I'm sorry, but I am a real noob and not sure where to download a "flashable zip rom" from.
DNeeded said:
Hi man.
I'm sorry, but I am a real noob and not sure where to download a "flashable zip rom" from.
Click to expand...
Click to collapse
I'm very worried about this.
Also other solutions say to download the right firmware for my region from websites like SamMobile but my country isn't listed anywhere.
Sorry if I am giving unneeded information, but I am seriously stressed over this.
DNeeded said:
I'm very worried about this.
Also other solutions say to download the right firmware for my region from websites like SamMobile but my country isn't listed anywhere.
Sorry if I am giving unneeded information, but I am seriously stressed over this.
Click to expand...
Click to collapse
Did you search for SM-P355 ?
What country do you need for?
tys0n said:
Did you search for SM-P355 ?
What country do you need for?
Click to expand...
Click to collapse
Yes and my country is New Zealand.
DNeeded said:
Yes and my country is New Zealand.
Click to expand...
Click to collapse
Yeah, can't find anything either. You're sure it's SM-P355?
Can you go to download mode and check model number?
tys0n said:
Yeah, can't find anything either. You're sure it's SM-P355?
Can you go to download mode and check model number?
Click to expand...
Click to collapse
Just did and it says:
Product name: SM-P355
Click to expand...
Click to collapse
DNeeded said:
Just did and it says:
Click to expand...
Click to collapse
Maybe it's imported from another country then. I really don't know.
Do you remember what csc it had before wipe?
You can probably flash firmware from any country as long as it's unbranded. (not carrier specific)
I've done it a lot on all my phones to get the latest updates faster. I've had no problems at all.
tys0n said:
Maybe it's imported from another country then. I really don't know.
Do you remember what csc it had before wipe?
You can probably flash firmware from any country as long as it's unbranded. (not carrier specific)
I've done it a lot on all my phones to get the latest updates faster. I've had no problems at all.
Click to expand...
Click to collapse
No idea what the CSC was.
I will try installing another regions firmware.
You think I'll be able do that and then use Kies emergency firmware recovery to reinstall the original firmware? (Sorry if that doesn't make sense, again I don't really know what I am doing).
Appreciate your help mate.
tys0n said:
Maybe it's imported from another country then. I really don't know.
Do you remember what csc it had before wipe?
You can probably flash firmware from any country as long as it's unbranded. (not carrier specific)
I've done it a lot on all my phones to get the latest updates faster. I've had no problems at all.
Click to expand...
Click to collapse
Hey! I just managed to download the firmware from Updato and I am very relieved to let you know that I was able to boot up the tablet and it worked successfully!
All my files are gone, but that's alright, I deserve that for being and idiot and screwing up in the first place!
Just some final questions: Since the firmware region is "Indonesia", what exactly does this mean?
From my Google searches I see that firmware region doesn't mean much, just a few settings are different (such as having the language automatically on Indonesian). Is this true, or will I encounter any issues regarding this, since I am in a different region?
I appreciate your help and advice! You are a very good person and a valuable member of this community.
Thank you!
Good you got it going, and thank you for your kind words
You're right. It's mainly just small regional differences and as long as the phone/tablet isn't locked to specific carrier it usually works just fine with any csc.
Hi guys, this is the a full Odin tar files for offical Nougat. Person outside the US can Flash and use it.
Unzip this package and get five file, flash it by Odin.
PS: It is better to flash the pit files. Don't worry, your Network unlocked status will remain same after updates.
mega: https://mega.nz/#!ZQg0FCoY
By the way, Nougat on S7Active is too slow，I found S7's package in waiting it LoL....
The decription key is: !WHLOkv-PVKMzWhe4ARbXonkOIa_mh_phjU9mYSHmHL8
Would this work on cricket phone g930az? I currently have aqa1 fw...
smxwang said:
Hi guys, this is the a full Odin tar files for offical Nougat. Person outside the US can Flash and use it.
Unzip this package and get five file, flash it by Odin.
PS: It is better to flash the pit files. Don't worry, your Network unlocked status will remain same after updates.
mega: https://mega.nz/#!ZQg0FCoY!WHLOkv-PV..._phjU9mYSHmHL8
By the way, Nougat on S7Active is too slow，I found S7's package in waiting it LoL....
Click to expand...
Click to collapse
What is the decription key
dirtydodge said:
What is the decription key
Click to expand...
Click to collapse
mega link was omitted by XDA web......LOL
You can try again....
smxwang said:
mega link was omitted by XDA web......LOL
You can try again....
Click to expand...
Click to collapse
Lol. Ok thanks. I Just imported it to my mega box. Thanks bud
Judson1975 said:
Would this work on cricket phone g930az? I currently have aqa1 fw...
Click to expand...
Click to collapse
I'd like to know as well. I'm not too happy with Echoe but it seems like that's the only rom that works on a normal S7.
MJPByron said:
I'd like to know as well. I'm not too happy with Echoe but it seems like that's the only rom that works on a normal S7.
Click to expand...
Click to collapse
Have you tried Stang5.0litre rom from the Verizon thread. It's a kick ass rom. But you need to be on MM to run it since Verizon hasn't got there nougat release till today so the dev hasn't rebased it yet
dirtydodge said:
Have you tried Stang5.0litre rom from the Verizon thread. It's a kick ass rom. But you need to be on MM to run it since Verizon hasn't got there nougat release till today so the dev hasn't rebased it yet
Click to expand...
Click to collapse
I'm on 6.0.1 - wouldn't it have issues with my phone being a G930AZ? I thought the different networks would be a problem.
MJPByron said:
I'm on 6.0.1 - wouldn't it have issues with my phone being a G930AZ? I thought the different networks would be a problem.
Click to expand...
Click to collapse
I'm not on cricket, but i am on AT&T, all i had to do was manually put my apn in. Then i downloaded titanium and froze setup wizard to get rid of the "this is not a Verizon sim" notification. It worked for me.
Close thread
Is there one for the S7 Active?
ThunderingLight said:
Is there one for the S7 Active?
Click to expand...
Click to collapse
Hasn't been found yet
Ok can you update the post once it has been found?
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
So, I did this. Pretty impressed with the overall device feel now, SE9 is nice . No hang ups other thank it took a long friggin' time, also remember this will WIPE all the data, so make sure to do a backup prior to. The initial/first phone setup is very iPhone-ish, imo.
bobloblaw1 said:
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
Click to expand...
Click to collapse
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
PGHammer said:
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
Click to expand...
Click to collapse
Will it work for sm-g930u at&t ????
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
HIGHLY doubtful - not with a specific firmware check in place.
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
miko12312 said:
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
Click to expand...
Click to collapse
What's your bootloader version? (5th from last letter in build number)
Sent from my SM-G955U using Tapatalk
FatalONEM8 said:
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
If it weren't for this being a daily driver, I'd consider it. However, because it is, that's not an option. So I'll have to wait for either a neutral version or one that will work with the SM-G930T.
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
micallan_17 said:
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
Click to expand...
Click to collapse
Try using PrinceComsy Odin
Sent from my SM-G955U using Tapatalk
oreo otas
Goodnight friends, I started to update my phone to version 8.0 but it has more than 30 min in the option of patchin system files is normal or my step to better life is my s7.
Excuse me for my English since it is not my native language.
spend the fright of my life but finally install now approve to see how it works on android 8.0
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Has anyone been able to successfully downgrade back to RA1 after sideloading 8.0?
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
Just reboot in recovery mode and wipe cache
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
I had the same issue. The recommendation of rebooting into recovery and wiping Cache works.
:good:
Hi guys im having a heck of a time trying to flash U1 FW to my s9+ cause it has the stupid sprint lease lock on it so i'm trying to flash u1 to it. The U1 worked for my s8+ to remove the lock and sprint bloatware. I have a SM-G965U with build # G965USQU3ARG7 and i downloaded SM-G965U1_G965U1UES2ARF4 firmware but when i try to flash it just fails. i tired it useing prince comsy odin. tried odin 3b and odin v3.12.3 and none works they all fail. So im lost to why its not flashing the phone! any help would be appreciated.
l3igl3ang said:
Hi guys im having a heck of a time trying to flash U1 FW to my s9+ cause it has the stupid sprint lease lock on it so i'm trying to flash u1 to it. The U1 worked for my s8+ to remove the lock and sprint bloatware. I have a SM-G965U with build # G965USQU3ARG7 and i downloaded SM-G965U1_G965U1UES2ARF4 firmware but when i try to flash it just fails. i tired it useing prince comsy odin. tried odin 3b and odin v3.12.3 and none works they all fail. So im lost to why its not flashing the phone! any help would be appreciated.
Click to expand...
Click to collapse
The reason why it is failing is because you are on a high boot loader, you current on V3 while the U1 firmware that you was trying to flash is on V2.. You can only flash firmware that's on the same boot loader.
You would need to download G965U1UEU3ARG7 and flash it in order to be on the U1 firmware...
kevindevonwilliams said:
The reason why it is failing is because you are on a high boot loader, you current on V3 while the U1 firmware that you was trying to flash is on V2.. You can only flash firmware that's on the same boot loader.
You would need to download G965U1UEU3ARG7 and flash it in order to be on the U1 firmware...
Click to expand...
Click to collapse
Well crap do u know where i could get G965U1UEU3ARG7 firmware i google it but has nothing but pay sites
I don't believe the ARG7 for the U1 hasn't been released yet. I'm still on ARF4, I haven't gotten any updates for ARG7 yet.
But you can get the firmware using the link below when it becomes available. It's the same one I used.
https://www.sammobile.com/firmwares/SM-G965U1/XAA/
well Dameit thats sucks wonder how long it usely takes for samsung to releases FWs for the phones.
l3igl3ang said:
well Dameit thats sucks wonder how long it usely takes for samsung to releases FWs for the phones.
Click to expand...
Click to collapse
To be honest it takes as long as it takes... Though for the U1 firmware it does appear to be the last one released after the carriers.
I would imagine that before they release a firmware that covers all the carriers they want to make sure it works for the individual carriers... But that's a theory/speculation I have.
Use Odin3 v3.13.1_3B_PatcheD for flashing U1 firmware on your Sprint SM-G965U
l3igl3ang said:
Hi guys im having a heck of a time trying to flash U1 FW to my s9+ cause it has the stupid sprint lease lock on it so i'm trying to flash u1 to it. The U1 worked for my s8+ to remove the lock and sprint bloatware. I have a SM-G965U with build # G965USQU3ARG7 and i downloaded SM-G965U1_G965U1UES2ARF4 firmware but when i try to flash it just fails. i tired it useing prince comsy odin. tried odin 3b and odin v3.12.3 and none works they all fail. So im lost to why its not flashing the phone! any help would be appreciated.
Click to expand...
Click to collapse
Just use Odin3_v3.13.1_3B_PatcheD for flashing U1 firmware on your Sprint SM-G965U model.
mohibd73 said:
Just use Odin3_v3.13.1_3B_PatcheD for flashing U1 firmware on your Sprint SM-G965U model.
Click to expand...
Click to collapse
He can't because he updated his phone to the latest sprint version which uses the v3 bootloader.
The current U1 firmware uses V2 bootloader.
scottusa2008 said:
He can't because he updated his phone to the latest sprint version which uses the v3 bootloader.
The current U1 firmware uses V2 bootloader.
Click to expand...
Click to collapse
yeah they was alrdy updated when i got the phones i got both phones for 225 for the pair owed bills and now lease locks
l3igl3ang said:
yeah they was alrdy updated when i got the phones i got both phones for 225 for the pair owed bills and now lease locks
Click to expand...
Click to collapse
First time I have ever heard of a Sprint Lease Lock.. Now I am curious over what that is, so off to google searching for it.
Think I found what your talking about... I am not sure if flashing the U1 firmware will work in this case given it's an S9+ and not an S8. Hopefully it does when the appropriate U1 firmware is released.
Depending on where you got the phones from maybe try doing a return and get a refund?
scottusa2008 said:
He can't because he updated his phone to the latest sprint version which uses the v3 bootloader.
The current U1 firmware uses V2 bootloader.
Click to expand...
Click to collapse
Thanks for the helpful information. I didnot know that.
mohibd73 said:
Thanks for the helpful information. I didnot know that.
Click to expand...
Click to collapse
No biggie... Just for clarification (if it helps in the future) you can only flash files with the same bootloader version as what is currently installed. You can also flash bootloader versions that are higher then what is currently installed on the device.
What you can not do is flash bootloader versions lower then what is currently installed.
Finding the bootloader version is easy once you know how. Using the firmware version indicated:
G965USQU3ARG7
The bootloader version is the number before the last 4 characters of the firmware version... In this your looking for the number before ARG7... Since the number is 3 it means this firmware uses the version 3 bootloader.
l3igl3ang said:
Well crap do u know where i could get G965U1UEU3ARG7 firmware i google it but has nothing but pay sites
Click to expand...
Click to collapse
Do note that it will definitely wipe data.
U1 firmware (G965U1UEU3ARG7) https://androidfilehost.com/?fid=1322778262903999031
Also use this Odin to flash (Odin3_v3.13.1_3B_Patche) https://androidfilehost.com/?fid=5862345805528067951
kevindevonwilliams said:
Do note that it will definitely wipe data.
U1 firmware (G965U1UEU3ARG7) https://androidfilehost.com/?fid=1322778262903999031
Also use this Odin to flash (Odin3_v3.13.1_3B_Patche) https://androidfilehost.com/?fid=5862345805528067951
Click to expand...
Click to collapse
So it is out there?
When did this update become available for the G965U1?
I haven't even gotten a notification that it's available (nor does it show up when I check for software updates)..
scottusa2008 said:
So it is out there?
When did this update become available for the G965U1?
I haven't even gotten a notification that it's available (nor does it show up when I check for software updates)..
Click to expand...
Click to collapse
Few days, but its behind time. Its July patch..
The update is only available via the Odin files currently
kevindevonwilliams said:
Few days, but its behind time. Its July patch..
The update is only available via the Odin files currently
Click to expand...
Click to collapse
Ok.. Am flashing it now, will post results once I get the phone back up and running
Got it all flashed and back up and running... Just took a bit to restore everything and all my settings. Haven't seen anything amiss as of yet, sure I won't find out if there are any quirks until I let things settle for a day or two.
** Update 9/10 - So far so good, working like a charm. Even the wifi issue I had where it kept saying my internet might not be available (even though it was, and turning wifi off and back on would make it work) seems to be gone. Thanks for the link kevindevonwilliams
kevindevonwilliams said:
Do note that it will definitely wipe data.
U1 firmware (G965U1UEU3ARG7) https://androidfilehost.com/?fid=1322778262903999031
Also use this Odin to flash (Odin3_v3.13.1_3B_Patche) https://androidfilehost.com/?fid=5862345805528067951
Click to expand...
Click to collapse
Sorry for my noob question, but it is just flash the full firmware or do I have to flash any combination file before do that?
I tried to flash G965UOYN3ARG7 TMB to my Sprint S9+ (firmware G965USQU3ARG7), but it didn´t switch the carrier.
Thanks in advanced.
rocz.mx said:
Sorry for my noob question, but it is just flash the full firmware or do I have to flash any combination file before do that?
I tried to flash G965UOYN3ARG7 TMB to my Sprint S9+ (firmware G965USQU3ARG7), but it didn´t switch the carrier.
Thanks in advanced.
Click to expand...
Click to collapse
You trying switch your device from Sprint (SPR) to TMobile (TMB)?
What service are you using at the moment?
kevindevonwilliams said:
You trying switch your device from Sprint (SPR) to TMobile (TMB)?
What service are you using at the moment?
Click to expand...
Click to collapse
My device is unlocked, but I have the same problem of lease Sprint. I did search in the web and I found this thread, I did download the files you posted, but I have already the firmware before mentioned and flash it using Patched Odin, but it didn´t work. Still having the same warning from Sprint.
rocz.mx said:
My device is unlocked, but I have the same problem of lease Sprint. I did search in the web and I found this thread, I did download the files you posted, but I have already the firmware before mentioned and flash it using Patched Odin, but it didn´t work. Still having the same warning from Sprint.
Click to expand...
Click to collapse
To carrier switch you would need to flash the U1 firmware, then insert the carrier of your choice [not Sprint] then set up device, after download the latest U firmware which is 3SARI4 and flash it.
Do not flash the USERDATA unless it is for the carrier you switching to
I ordered an unlocked model, G965U1 from eBay, but the seller sent me a G965U Verizon. At least that's the firmware that it has on it. I'm familiar with Odin and everything, so I'm wondering if I should keep it and just flash it over to what I want. Is this a viable option, I already had to send back a OnePlus 6T back to OnePlus, so I'm getting kind of tired of sending phones back.
Will the phone be just as good as what I ordered if I flash a different firmware on it, radio band-wise and such?The phone says I do not have a Verizon sim in it but I seem to be getting service from my T-Mobile sim.... Is this because all Verizon phones come unlocked? Sorry I'm just so confused with a different models and different bootloaders and different firmwares, so any advice would be appreciated!
Issue resolved, big thanks to user @jcsww!
I'm having similar crisis, can you tell me the steps u did? I have downloaded Odin and the Tmobile firmware that I've yet to flash. I want to do a backup first but cannot find a TWRP for G965U, guess ill just create a backup on stock?
NekoXiu said:
I'm having similar crisis, can you tell me the steps u did? I have downloaded Odin and the Tmobile firmware that I've yet to flash. I want to do a backup first but cannot find a TWRP for G965U, guess ill just create a backup on stock?
Click to expand...
Click to collapse
I would start by reading where I posted in the other thread, and another member stepped up and laid it all out for me: https://forum.xda-developers.com/galaxy-s9-plus/how-to/g965u-g965u1-firmware-links-t3763487/page144. I don't have any clue about backing up or using TWRP on this device tho.
i have a g965u but i dont have VOLTE.The phone was from US and i use in Romania.the phone is ok but i dont have VOLTE.What i should do?
tanaru said:
i have a g965u but i dont have VOLTE.The phone was from US and i use in Romania.the phone is ok but i dont have VOLTE.What i should do?
Click to expand...
Click to collapse
What firmware does the phone have, from what US carrier? I I think the only thing you can try is flashing different firmwares to see if it will work. Maybe try converting it to a U S. factory unlocked G965U1, then the phone will reboot to configure the settings and features according to your sim card. No guarantee with this kind of thing tho.
I have ore 8.0 and the phone is from sprint but unlocked.i thin is from sprint cause i have sprint omadm
sm g965u
g965usqs3brj6
In settings-system updates is:UICC Unlock:Your device is unllocked for any SIM card
tanaru said:
sm g965u
g965usqs3brj6
In settings-system updates is:UICC Unlock:Your device is unllocked for any SIM card
Click to expand...
Click to collapse
You could try switching to the firmware for unlocked model G965U1, latest is 3ARJ6. No guarantee that it will make volte work though, that kind of thing is definitely hit and miss, and your phone is ideally suited for American carriers. But that's what I would try. You might also want to call up your service provider and see if they can do anything.
YrrchSebor said:
You could try switching to the firmware for unlocked model G965U1, latest is 3ARJ6. No guarantee that it will make volte work though, that kind of thing is definitely hit and miss, and your phone is ideally suited for American carriers. But that's what I would try. You might also want to call up your service provider and see if they can do anything.
Click to expand...
Click to collapse
You can learn me how to flash step by step?
My phone is a sprint version and is unlocked.When i start up my phone i have a notification"sprint omdam",I have SQS3BRJ6 software version.On this i have to put U1 version(3ARJ6)? I have to flash with odin patched or nonpatched because i want the feature updates?
tanaru said:
You can learn me how to flash step by step?
My phone is a sprint version and is unlocked.When i start up my phone i have a notification"sprint omdam",I have SQS3BRJ6 software version.On this i have to put U1 version(3ARJ6)? I have to flash with odin patched or nonpatched because i want the feature updates?
Click to expand...
Click to collapse
I flashed my Verizon G965U to G965U1. I used the patched Odin and used the CSC from the U1 firmware... My phone flashed and wiped, and then it booted up and detected my SIM card, then it rebooted again to configure all the settings based on my SIM card. After I did that I was getting the U1 updates directly to the phone.
Thanks!you can give me the variant of odin and soft to flash for my phone?
tanaru said:
Thanks!you can give me the variant of odin and soft to flash for my phone?
Click to expand...
Click to collapse
I don't remember exactly where I got them but they are easy to find by searching. I remember the Odin file ended in patcheD.zip. For the firmware I believe I used the Samfirmware site.
why is necesarily patched odin?
tanaru said:
why is necesarily patched odin?
Click to expand...
Click to collapse
I believe it's because you are flashing a firmware that does not match what is already on your phone.
YrrchSebor said:
I believe it's because you are flashing a firmware that does not match what is already on your phone.
Click to expand...
Click to collapse
and what the firmware i should choose ,cause are a lot of U1 on sammobile.it needs to flash all files or only csc?