Hello guys,
my phone ( Xiaomi Redmi note 3 Pro ) is bootlooping after flashing SuperSU.
I am using Nitrogen OS 7.1 and stuck in the logo.
I readed about booting the phone into recovery by pressing Volume +/- with power button.
But my phone did not respond to them even after pressing for a long time.
I hope you guys can help me
EDIT : I can enter to TWRP now but can I just use UnSU script to remove the flashed SuperSU that made my phone bootloop to fix the problem or do I need to factory reset it?
A Q R I N said:
Hello guys,
my phone ( Xiaomi Redmi note 3 Pro ) is bootlooping after flashing SuperSU.
I am using Nitrogen OS 7.1 and stuck in the logo.
I readed about booting the phone into recovery by pressing Volume +/- with power button.
But my phone did not respond to them even after pressing for a long time.
I hope you guys can help me
EDIT : I can enter to TWRP now but can I just use UnSU script to remove the flashed SuperSU that made my phone bootloop to fix the problem or do I need to factory reset it?
Click to expand...
Click to collapse
wipe everything and flash rom again.
A Q R I N said:
Hello guys,
my phone ( Xiaomi Redmi note 3 Pro ) is bootlooping after flashing SuperSU.
I am using Nitrogen OS 7.1 and stuck in the logo.
I readed about booting the phone into recovery by pressing Volume +/- with power button.
But my phone did not respond to them even after pressing for a long time.
I hope you guys can help me
EDIT : I can enter to TWRP now but can I just use UnSU script to remove the flashed SuperSU that made my phone bootloop to fix the problem or do I need to factory reset it?
Click to expand...
Click to collapse
Why still using SU?, use Magisk.
pritamdutt said:
wipe everything and flash rom again.
Click to expand...
Click to collapse
Are there another ways without flashing everything from the start?
Related
I somehow managed to get my ZTE Blade Q Maxi into a boot loop.
I know this can be solved by installing a new rom , but do i need CWM for that?
zbqm said:
I somehow managed to get my ZTE Blade Q Maxi into a boot loop.
I know this can be solved by installing a new rom , but do i need CWM for that?
Click to expand...
Click to collapse
enter recovery with power up vol combination reset phone and done
androidRAX said:
enter recovery with power up vol combination reset phone and done
Click to expand...
Click to collapse
Hi, I know that the thread is old but I've got the same problem as OP but can't boot the phone into recovery mode or download mode.
Stock Alcatel Onetouch Pop c5 5036
Hi there
So this happened to my phone just recently. I went to turn it on and it would boot up but it would stay in a boot loop showing the boot animation "smart choice".
The thing is that this phone is NOT rooted, so there is no custom recovery. Just the stock ROM. I tried booting into the stock recovery. No luck, the only thing it would display is the boot animation.
Next thing is tried was to flash the stock rom from This
This is from Forum Here
Nothing happened
I reckon it was that needed to be download mode or something but the instructions for installation were pretty vague so i have no idea.I tried different combinations of power + volume down and power + volume up and nothing but the boot animation would appear
I hope that i haven't Bricked my phone, but how tho. Its stock ROM.
If anyone could help me with anything regarding how to get my phone back to operation it would be much appriciated:good::good:
Just flash stock rom via spflashtool it will fix your problem...find correct model...because it have varient model like 5036a 5036d..and i have 5037x. for recovery mode..remove battery..press on button 5 10 second..put battery..hold volume up... poweron the devices keep holding volume up..until recovery languege appear..u can select by touch it...or u can flash cwm via spflashtool then flash custom rom....tq... hope help..
amlalodo said:
Just flash stock rom via spflashtool it will fix your problem...find correct model...because it have varient model like 5036a 5036d..and i have 5037x. for recovery mode..remove battery..press on button 5 10 second..put battery..hold volume up... poweron the devices keep holding volume up..until recovery languege appear..u can select by touch it...or u can flash cwm via spflashtool then flash custom rom....tq... hope help..
Click to expand...
Click to collapse
can u give give m the link to flash cwm via spflashtol..
I have TWRP recovery installed on moto e2 3g i.e XT1506. I am not able to flash CM 12.1 as when I slide to flash it, after processing for 3-5 seconds , it ends up again on the TWRP home. When I try to power off/reboot , it says that "No OS installed! Are you sure you wish to power off/reboot?". After sliding for power off/reboot, another message pops up showing ... Install SuperSu? "Your device does not appear to be rooted. Install SuperSu now? This will root your device. After swiping for SuperSu installation... it ends up on the Bootloader Unlocked Warning screen. I am stucked and don't know what to do.
U should try and use the latest squid TWRP.....the new build will have probably cured the bug u r facing
Sent from my XT1521 using Tapatalk
Moto E2 3G otus Stuck on Bootloader
I have TWRP recovery installed on moto e2 3g i.e XT1506. When I tried to install Lineage OS using TWRP, after processing for 3-5 seconds , it ends up again on the TWRP home. When I tried to power off/reboot , it says that "No OS installed! Are you sure you wish to power off/reboot?". After sliding for power off/reboot, another message pops up showing ... Install SuperSu? "Your device does not appear to be rooted. Install SuperSu now? This will root your device. After swiping for SuperSu installation... it ends up on the Bootloader Unlocked Warning screen. I got stucked with this warning screen. Got any idea? (pls note that i can't got to recovery mode). Pls help.
sonu abraham said:
I have TWRP recovery installed on moto e2 3g i.e XT1506. When I tried to install Lineage OS using TWRP, after processing for 3-5 seconds , it ends up again on the TWRP home. When I tried to power off/reboot , it says that "No OS installed! Are you sure you wish to power off/reboot?". After sliding for power off/reboot, another message pops up showing ... Install SuperSu? "Your device does not appear to be rooted. Install SuperSu now? This will root your device. After swiping for SuperSu installation... it ends up on the Bootloader Unlocked Warning screen. I got stucked with this warning screen. Got any idea? (pls note that i can't got to recovery mode). Pls help.
Click to expand...
Click to collapse
Try pressing the power button for 10-15 seconds to force the reboot, then quickly go into fastboot or bootloader mode and flash squid TWRP r5 and install again Lineage OS
Stuck at bootloader , cant boot into recovery (
danayrubio said:
Try pressing the power button for 10-15 seconds to force the reboot, then quickly go into fastboot or bootloader mode and flash squid TWRP r5 and install again Lineage OS
Click to expand...
Click to collapse
hey my device is stuck at bootloader warning and cant go into recovery mode by pressing power button and volume button , please help me how to solve this
Is there any way that i can boot into recovery ?
Hello,
I have a redmi 3S rooted with TWRP and dev rom EU.MI.
I tried to update my rom with the last dev rom, but I have made a wipe dalvik and cache before the installation, and not after... Now, my phone is stuck on MI logo.
I have tried to reboot in TWRP with vol up + power buttons, but I still obtain the MI logo. However, I can access to the Fastboot with vol down and power buttons.
Do you have an idea to repair my phone?
Thanks!
Edit : Resolved, I finnally succed to acces recovery TWRP
Can you share how?
I'm struck at MI logo and even if I shutdown it is restarting at struck at mi logo. If I hold volume and power button, I can see fastboot screen but nothing happens after that. Kindly help how to reset my mi pad
Same problem here.
chandidas said:
I'm struck at MI logo and even if I shutdown it is restarting at struck at mi logo. If I hold volume and power button, I can see fastboot screen but nothing happens after that. Kindly help how to reset my mi pad
Click to expand...
Click to collapse
Problem:
1.I had Resurrection Remix rom 7.1.2 installed with TWRP.
2. Tried to Install stock rom and stock recovery. Was able to install stock recovery but it was hanging in recovery. Could not move with volume buttons.
3. Then I tried flashing fastboot roms through miflashtool. Flashing was done successfully but nothing happens. It is now stuck on MI logo.
4. Mi logo only(No powered by android below or anything) It just restarts.
5. Cant go to recovery by any means tried everything.
6. Can only go to fastboot.
7. Adb does not detect device tried to install multiple times.
8. Cannot switch on Usb debuging since tablet wont boot even once.
9. I have no means to flash recovery as well.
Please help.
Same here
daewoo31 said:
Problem:
1.I had Resurrection Remix rom 7.1.2 installed with TWRP.
2. Tried to Install stock rom and stock recovery. Was able to install stock recovery but it was hanging in recovery. Could not move with volume buttons.
3. Then I tried flashing fastboot roms through miflashtool. Flashing was done successfully but nothing happens. It is now stuck on MI logo.
4. Mi logo only(No powered by android below or anything) It just restarts.
5. Cant go to recovery by any means tried everything.
6. Can only go to fastboot.
7. Adb does not detect device tried to install multiple times.
8. Cannot switch on Usb debuging since tablet wont boot even once.
9. I have no means to flash recovery as well.
Please help.
Click to expand...
Click to collapse
Iam with the same problem as you hope someone comes for our help
https://en.miui.com/forum.php?mod=viewthread&tid=2781455#lastpost i had the same problem, i follow the above guide and it works.