Nokia 5 TA1053 Error Flashing With Cm2
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 430 [MSM8937]
ID_BLOCK_S : 4838D9EF
ID_BLOCK_L : CDC92C120E8AC04168853E56D89F42B0
ID_BLOCK_L : 4878EF919778A4F339506A9D283CD512
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE13MB
Boot Ok!
Flash Chain : 65
Flashing now
Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : adspso.bin
Flashing : sec.dat
Flashing : splash.img
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : boot.img
Flashing : recovery.img
Flashing : hwconf.cfg
Flashing : sysinfo.cfg
Flashing : splashm.img
Flashing : hidden.img
Flashing : cda.img
Flashing : persist.img
Flashing : misc.img
Flashing : mdtp.img
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : system.img
Flashing : cache.img
Flashing : userdata.img
Invaild pointer opration
please help me
Related
Hey guys, i was upgrading from old 2.2 baseband to 2.3 baseband using lgmdp.exe method . described here http://forum.xda-developers.com/showthread.php?t=1149530
however when i did that burning eeprom froze in d middle . it wont progress any further as shown in the image. consequently i had to remove my phone which was in emergency mode at that time. i plugged it again but lgmdp.exe just wont read it.
I panicked removed the battery and then the phone wont start . (earlier i was using cm7 rc1 with old baseband using nightlyfour rom's patch) .howver i was able to get it back into recovery mode by pressing back and volume up keys together while starting the phone. i flashed stock 2.3 using kdz ,IT WORKED my phone gets netwokr and calls as normal but i think my baseband is somewat corrupted as is shown in kdz log.
[13:41:22:694] : =============================================
[13:41:22:694] : Log is started on 24.03.2012, at 13:41:22:694,
executable: E:\Android\ROMS\Original Tools\KDZ_FW_UPD_EN\KDZ_FW_UPD_EN\KDZ_FW_UPD.exe (ProcID: 0x000012ec),
compile time : Sep 13 2010 11:34:51
[13:41:22:694] : Version :
[13:41:22:696] : Get Usb Port
[13:41:22:702] : rsi.strFriendlyName=LGE Bluetooth TransPort (COM4)
[13:41:22:702] : Remove LGE Bluetooth TransPort (COM4)
[13:41:22:702] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM13)
[13:41:22:702] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[13:41:22:702] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM13
[13:41:22:702] : Port = COM13
[13:41:22:705] : UNKNOWN : Req(12) -> Rsp(13)
[13:41:22:706] : UNKNOWN : Req(12) -> Rsp(13)
[13:41:22:707] : UNKNOWN : Req(12) -> Rsp(13)
[13:41:22:707] : >> DIAG_STATUS_F FAILED
[13:41:22:712] : >>Get Model Name [DIAG_VERNO_F]
[13:41:22:713] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:714] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:715] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:716] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:717] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:718] : BAD CONN MODE : Req(0) -> Rsp(3)
[13:41:22:718] : FAIL (No Phone)
[13:41:22:718] : GetModelName() Operation Failed Check Diag CMD
[13:41:22:718] : EMERGENCY Booting Mode
[13:41:22:718] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[13:41:22:719] : BS/P500/7D\ROMS\Original Tools\Tail.exe
[13:41:22:719] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P500
[13:41:22:730] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[13:41:22:730] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[13:41:22:731] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[13:41:22:731] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[13:41:22:742] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[13:41:22:742] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[13:41:22:742] : NV Write Fail : NV ITEM 9028(9028)
[13:41:22:842] : >> GET DLOAD COMM MODE
[13:41:22:843] : [GetCommMode] Communication mode : 2
[13:41:22:843] : Pre Nand Download
[13:41:22:843] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[13:41:22:843] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[13:41:22:844] : [COM13] >>NandFlashInitWithFile(PARTITION TBL)
[13:41:22:844] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[13:41:22:936] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[13:41:22:936] : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[13:41:22:936] : [COM13] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[13:41:22:940] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[13:41:22:952] : [COM14] >>Dl_AsyncWrite()
[13:41:22:952] : >> AMSS FLASHING ...
[13:41:22:956] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[13:41:22:956] : Sending Pkt Seq : 0
[13:41:22:957] : Sending Pkt Seq : 1
[13:41:22:958] : Sending Pkt Seq : 2
[13:41:22:958] : Sending Pkt Seq : 3
[13:41:22:958] : Sending Pkt Seq : 4
note that i had taken nv2 backup before upgrading baseband which i cant restore now coz lgmdp.exe doesnt read my phone it detects but is unable to read any info no imei no bluetooth address
Now i am using cm7 rc wid new baseband but sometimes baseband in settings shows wild characters ! any inputs ????
Your basebamd is ok!This bug is from the rom... I have this too
Sent from my LG-P500 using xda premium
can u explain why lgmdp wont read it anymore. i think its coz of some temporary files mayb . also does successful flashing from kdz means baseband is ok ? baseband resides on a separate partition right ?
sarfaraz1989 said:
can u explain why lgmdp wont read it anymore. i think its coz of some temporary files mayb
Click to expand...
Click to collapse
Don't know, doesn't matter
sarfaraz1989 said:
also does successful flashing from kdz means baseband is ok ?
Click to expand...
Click to collapse
Yes
sarfaraz1989 said:
baseband resides on a separate partition right ?
Click to expand...
Click to collapse
Yes, for example:if you flash mik's cm7 or some custom rom made for old bb you won't get signal...
Need Scatter File
Please Help Me !
Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42018874D002211B
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42018874D002211B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 13C3F3528A921A594F14348381D36169
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
[AP] : Initial info read Ok!
Brand : Vodafone
ProdName : Vodafone_Smart_Tab_4
ProdModel : Vodafone Smart Tab 4
Device : Vodafone_Smart_Tab_4
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.TABLET.MP.V1
Done!
Elapsed: 00:00:12
Reconnect Power/Cable!
Operation : Remove Viruses [SmartAV] [ v1.47 ]
SmartAV Conf : 100/80/2000
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42018874D002211B
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42018874D002211B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 13C3F3528A921A594F14348381D36169
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Hello!
Not work radio on Xiaomi Redmi 2 after "fastboot erase modemst".
I reflash via fastboot files:
PHP:
fastboot flash hyp hyp.mbn
fastboot flash tz tz.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash modem NON-HLOS.bin
but it did not help.
Phone does not detect SIM card and displays IMEI 0
What to do?
I tried to flash the radio through via QPST, but "service programming" could not open the phone :crying:
PLEASE, HELP!!!
Hello my personal x400 positixo this rom with damaged did not find support firmware conpativel any possibility of find compatible firmware
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : 00B000B000B000B000B0000000000000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
Hi All
Few weeks ago i got hold of BQ phone that have safe dual boot option (Device CPU : MSM8952)
Feature is volume up and power to boot to main system , and normal power is to boot to fake os (empty one)
Normal boot is password protected..
What i want to do is to clone this dual boot feature on my nexus 5x or any other ..
reason why i want to do is simple... i cant get this model any more .. its and of line
After downloading all files from the phone i got the following :
adspso.bin
boot.img
cache.img
cmnlib.mbn
cmnlib64.mbn
devcfg.mbn
emmc_appsboot.mbn
fhfs.ldr
gpt_backup0.bin
gpt_main0.bin
keymaster.mbn
mdtp.img
misc.img
NON-HLOS.bin
persist.img
recovery.img
rpm.mbn
sbl1.mbn
sec.dat
splash.img
system.img
tz.mbn
userdata.img
due to my small knowledge in low level programming plz advise what files above contain information of the dual boot function
If anyone can help ill financially appreciate it
Thanks
php717 said:
Hi All
Few weeks ago i got hold of BQ phone that have safe dual boot option (Device CPU : MSM8952)
Feature is volume up and power to boot to main system , and normal power is to boot to fake os (empty one)
Normal boot is password protected..
What i want to do is to clone this dual boot feature on my nexus 5x or any other ..
reason why i want to do is simple... i cant get this model any more .. its and of line
After downloading all files from the phone i got the following :
adspso.bin
boot.img
cache.img
cmnlib.mbn
cmnlib64.mbn
devcfg.mbn
emmc_appsboot.mbn
fhfs.ldr
gpt_backup0.bin
gpt_main0.bin
keymaster.mbn
mdtp.img
misc.img
NON-HLOS.bin
persist.img
recovery.img
rpm.mbn
sbl1.mbn
sec.dat
splash.img
system.img
tz.mbn
userdata.img
due to my small knowledge in low level programming plz advise what files above contain information of the dual boot function
If anyone can help ill financially appreciate it
Thanks
Click to expand...
Click to collapse
Interesting ..
Is it BQ aquaris by any chance? )))
game_bit said:
Interesting ..
Is it BQ aquaris by any chance? )))
Click to expand...
Click to collapse
That is correct ..
Anyone can explain how to get this fixed ?