Samsung sm-c7000 nougat, FRP locked. I tried almost every method on YouTube. PLEASE help urgent.
Did you tried this ?
https://www.youtube.com/watch?v=huv1q3h8SC0
C7000 FRP locked. And cannot flash any ROM, Custom Binary blocked by FRP
I tried to flash latest Hong Kong Firmware on my C7 and Odin failed and now my phone is stuck at "an error occured while updating the device firmware" screen. Smart switch and Kies doesnt recognize the device now. I tried flashing stock Roms via Odin but fails at Custom Binary Blocked by FRP. Now I'm stuck between error occured screen and download mode.
I have tried various youtube solutions including FRP hack tools but they do not have c7000 in their list and didn't work for me.
PLEASE HELP ASAP.
Anybody to help on this
deadayya said:
I tried to flash latest Hong Kong Firmware on my C7 and Odin failed and now my phone is stuck at "an error occured while updating the device firmware" screen. Smart switch and Kies doesnt recognize the device now. I tried flashing stock Roms via Odin but fails at Custom Binary Blocked by FRP. Now I'm stuck between error occured screen and download mode.
I have tried various youtube solutions including FRP hack tools but they do not have c7000 in their list and didn't work for me.
PLEASE HELP ASAP.
Click to expand...
Click to collapse
Anybody to help on this
Related
Cause:- Turn off OEM unlock accidentally.
Phone:- Galaxy S7 Edge
Model:- SM-G935F
I think it has R4 binary maybe
Android version:- 8.0 Oreo experience on 9.0
Problem###########################
"Custom binary blocked by FAP" Not FRP.
Can someone give me a 100% accurate solution?
It's original firmware successful loaded in phone via Odin but phone didn't install the firmware and says "No Command".
And also I can't access recovery=TWRP.
I also tried combination and different tricks and files to flash it's original recovery but
The (Samsung customer care center) also says that they can't solve this stupid issue
Is there any tar or md5 file that can able to remove this FAP lock using Odin ?
Please someone reply
Hi , try with this :
https://updato.com/firmware-archive-select-model?record=E1F4162020FF11E99F15FA163EE8F90B
reply
ok but i am 80% sure that it will not work.
FAP lock
It's German file. I am living in Pakistan.
Can you give the download link of SM-G935F from Samsung update s website?
I think it's Latest firmware 11/03/2019 with PAK region!
Hello, I was recently given a Tab S3 (Verizon) by a friend, and it was FRP locked. When asked, the friend said that she had no Idea which account might have been on it, and none that she tried worked, so I was stuck. So far I have tried a lot, and most recently, I have been trying to use Odin to flash a Combo file that I found for this model, but it fails to flash, and the tablet states:
Code:
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 0
A couple of questions:
1) What does this mean?
2) Is this because it is FRP locked?
3) If it is, am I SOL?
4) If not, am I SOL anyway with the FRP lock?
I have had some experience with android modding, so I'm not a total noob, but don't take that for granted, I may have missed something very stupid/obvious.
The current firmware is: Oreo/T827VVRS2BRJ1
The combo firmware is: Oreo (I think)/T827VVRU0AQB9
Odin reports FRP Lock is on
Well, I managed to get firmware to flash by getting the same version that is on the tablet currently, but the flashing did not help, because FRP lock is still on. I even went as far as to get a partition table file and completely nuke the nand, which was probably a stupid idea, but nevertheless, even that didn't work to remove the FRP lock. Any ideas?
Thanks, SciFI101
P.S. Also note that the firmware that flashed was not a combo file, I have no idea what the difference is, do I need a combo file to remove FRP?
Flash combination firmware and then remove the google account and delete the Google account on device administration. Flash back original firmware all done.
Which combo firmware should I flash? Any that I have tried have failed with the SW REV CHECK FAIL error.
Also, the stock recovery seems to be shagged, after the blue "Installing updates"/"No Command" screen, the screen goes almost entirely dark, but it is still the same blue screen with Andy in the middle. It still boots into the OS and download mode otherwise. flashing BL and/or AP doesn't seem to fix it
Ok, so, I have an S9+ model G9650ZHS6CSK4 (Android 9.0, I only found one firmware version that matched my bootloader version and it was a 9.0 one)
It took me a long while, but I've downloaded this combination firmware G9650ZCU6ASJ2 (FA80)
Everything fine there, but, when I go to Odin and load the combo file in the AP slot of Odin, connect the phone and then click start it immediately stops, and in the phone it says:
FRP is enabled, ignore PIT download.
FRP is enabled, not allowed to download non-FRP abl binary
Here is the log of Odin when it happens: https://m.imgur.com/a/dEAwC26
What am I doing wrong? I know the phone is FRP locked, I want to bypass it.
Can you guys help me?
Hi guys, I rooted my Samsung C7 pro 701F phone recently and the phone was working just fine until the other day I restarted my phone and found the message on the phone reading the system software has not been authorized by Verizon wireless. it cant boot to recovery neither download mode. It also says custom binary blocked by frp lock (recovery.img) secure fail: recovery. Please help.
flash official rom with odin...download from sammobile
hi all,
I have Samsung SM-G935W8 (in Canada), bought used from someone. recently, try to play with android, and realized the phone PDA was G935UUEU4BRD1, and model was SM-G935U which is different from the model that showing on back cover. think the guy flashed a different rom for this phone.
couple days ago, I did hard factory reset for no reason, and get google account locked. then search online and learning how to fix it. seems like need to flash combination rom --> use tool bypass frp --> flash official rom to solve this issues.
i downloaded many combination firmware and all failed on odin flash. until i use one that allowed me to flash and success to open the phone as Factory Binary. But, I noticed the phone model changed to SM-G935A, which is AT&T firmware. the android version is 6.0.1, when I try to run program to do FRP bypass, no luck, think that because I can't turn on OEM- Unlock option(can't find it on developer option tough)? or bootloader locked?
now, I can only flash official rom that from AT&T, and android 8 that I can find it. if the phone can be fixed FRP issues, model change to G935A is fine, I dont care that model, I dont use the phone for call, only for wifi and camera. and maybe later can play flash to other model of ROM. not sure if possible.
current, the working combination rom I flashed is PDA : G935UUCUBATA1
ADB FRP to bypass FRP (not working)
and flashed to AT&T rom PDA: G935AUCUBCTB1_G935AATTBCTB1_8.0.0
FRP still not bypassed, and stuck on google account validation screen. any advice how and what tools can bypass FRP for this phone now model is SM-G935A? thanks in advance!