I've had my Gear S for about a month now, and I love everything about it, except for the software itself. Tizen is such a pain as I switched from my old urbane to this, and I'm actually kinda missing the urbanes functionality with android wear. Is there an updated method to install android wear on an SM-R750A. Please do tell
bump
Related
Maybe someone can help, but Beelink use to work great until the latest update to Wear devices was released.
If anyone is like me, they would like to have there watch be able to switch between phones without having to do a factory reset on the device every time (I use an old phone for working out and not my everyday phone).
Can someone help and make an app, similar to beelink (which is unavailable now), that can bring this functionality?
That would be super handy with so many roms to try it socks having to pair the watch over and over.
I agree. Another reason why this would be awesome! Can anyone help???
Ya I'm seriously interested as well. Been changing roms so much this past week.
This is a way
http://forum.xda-developers.com/and.../app-reset-wear-client-switch-phones-t3058962
So I tried out the new Lollipop builds floating around the VZW Dev forum (I tried every single build) and I'm having issues connecting to my G Watch. I have, since, reverted back to 4.4.4 LiquidSmooth to get it working again. It seems that 5.0 can see the watch via Bluetooth and the watch can see the phone, but the Wear app will not connect the two together. I haven't seen anything about this so far, but it's not likely that many people installing these ROMs are looking for compatibility with their smartwatch. I wanted to put it out there that, at least for my VS985 G3 and my LG G Watch, 5.0 won't connect the two. If anyone has had any luck with making a connection on a 5.0 ROM, please do reply and tell me exactly what you're using and what you did, because I have been eager to get 5.0 since Material Design and ART runtime was announced.
I know we have (or had) an issue with bluetooth calling devices, but since the watch works 100% on LS KK, I'm not sure what the issue could be here.
I've gotta factory reset my 360 any time I jump to another ROM. Can't speak for the G watch but the Moto 360 works fine on 5.0 so I'd assume you can. If that's the only thing keeping you off of 5.0 it'd be worth giving a reset a shot.
Need to reset you watch
I agree with dustinb17. Any time you move the watch to a new device or new rom, you have to reset the watch. It kind of makes sense in a way. its storing body vitals and such and it doesn't know that the phone is changing and not the person.
Hello,
since i have updatet to Android Nougat 7.0 last week i am unable to start the Android Wear app. The only thing i see is the Android Wear and the Google logo.
I have a Sony Smartwatch 3 and it wouldn't be very nice if this wouldn't work any more.
Could someone try, if the App works with another Z5C on Nougat?
Best Regards
Zillinda
it works on mine, i have a moto 260 gen 2, that is on wear 1.5.
i have intermittent bluetooth problems, the phone disables bluetooth sometimes.
I also have a smartwatch 3 at home that i stopped using a while ago, if you want i can check if i can pair it with my phone.
Also, i did a clean install of 32.3.0.378 and i wiped my watch to re-pair it with my phone
Zillinda said:
Hello,
since i have updatet to Android Nougat 7.0 last week i am unable to start the Android Wear app. The only thing i see is the Android Wear and the Google logo.
I have a Sony Smartwatch 3 and it wouldn't be very nice if this wouldn't work any more.
Could someone try, if the App works with another Z5C on Nougat?
Best Regards
Zillinda
Click to expand...
Click to collapse
I am having the same problem. Have you found a fix for it yet. I have a Samsung Galaxy S7 Edge with a Huawei watch. I am just getting the Android Wear Google logo and the app won't open. With that I can't resync my apps. It just started when my phone updated to nougat
DirtyJailGuard said:
I am having the same problem. Have you found a fix for it yet. I have a Samsung Galaxy S7 Edge with a Huawei watch. I am just getting the Android Wear Google logo and the app won't open. With that I can't resync my apps. It just started when my phone updated to nougat
Click to expand...
Click to collapse
I tried to reset my phone to factory status and now the app works.. I don't know what the problem was and it was really annoying to reinstall every app but now it works.
Zillinda
Hi all,
Just OTA upgraded my Z5 to Nougat and it immediately stopped my Sony Smartwatch 3 connecting, have tried resetting both phone and watch, to no avail. I then tried connecting my SW3 to my wives older sony phone and it worked perfectly, is anyone else having the same problem.
I have been a very loyal Sony customer over the years, but now after promising in writing that they would upgrade the SW3 to android wear 2.0 and then going back on their word and now not being able to use it at all since their official nougat upgrade, don't think I will buying another Sony Phone or accessory ever again, they used to be brilliant, really don't know what has happened to them lately.
Many thanks for your time in this matter, I look forward to reading your comments on this matter.
Kindest Regards - Ashe.
Hi, i have crazy idea in my mind. Can i make smartwatch of old android phone, everything what i need is just operating system for it(it has to be android), or something else what makes it like smartwatch. I think android wear is not possible (of course is? But you need drivers and kernels and so on) to flash onto phone. I love tinkering and this is the thing what i have been dreaming very long time
Hey guys!
Bought myself a Stratos 3 early this summer which was replaced under warranty because the battery was drained in a few hours, GPS unable to locate etc.
However, I could pair it with the (then) Amazfit App on my iPhone 11.
Last week I got my brand new replacement device which is impossible to pair with the (new) Zepp app. I’ve tried a million tips found online but it just won’t pair with my phone. I’ve scanned the QR code about 5000 times without success.
Tried with a friend’s Samsung model whatever and managed to link the device to my account. Then the watch is “unlocked”.
However, when trying to open the settings I keep getting the message “Unfortunately settings has stopped”. It still won’t sync with the iPhone and when resetting the device to factory settings I’m back at square one, unable to pair with iPhone.
Latest firmware in place according to the device when it’s “working”.
I’ve already contacted the company I’ve bought it from and I will return it the coming Monday.
However, I do like the looks of it and functions (when it’s working) so I thought I’d check with you guys if there are any ideas to get it working properly.
Thanks in advance!
Just update thé watch to latest Fw (search New Fw from the watch connected in WiFi) the app is unable to find it.
How do I do that when the watch says it has the latest fw?
Connect the watch to the WiFi then check update from the watch
So, i did pair it again with the Android, updated the device to latest fw.
It still won’t sync with my iPhone
Wonder if it’s something wrong with the Zepp app?
Anyway, I’ve had it with Amazfit. I’m returning it tomorrow.
I’m sorry to hear that, hope you approached [email protected]
I did the same thing, made a video and shared it with them selling hello. Eventually with a lot of issues. I gave up on the Stratos 3 Watch.
Now I don’t have to worry.
Plppppppppp
I haven’t reached out to their support, I cannot really see that they could help me out with this.
Anyway, fed up with trying to get it to work with me so it’s being sent back.
Might get an Honor Magicwatch 2 instead, they seem quite similar both in appearance and function.
Are you sure?? Does it work with iPhone as in iOS
As a last resort sort of try, I reached out to their support but to say the least, their support sucks a*s!
Haven’t sent it back yet, but will any day now.
Can anyone confirm that their Stratos 3 works fine with the iOS Zepp app? Particularly, Stratos 3 and an iOS iPhone 11? The fact that the watch works fine with Samsung Android devices but not with my (or anyone else’s iOS) device suggests that it’s their iOS Zepp app that’s corrupt!
Thanks!
Here many problems with iOS an Stratos 3. But same problems with both Zepp and Amazfit
New Zepp update for iOS released today
They’ve released numerous app updates during the past weeks/months but none of them has cured my problem
I’m traveling today but will check when I get home, fingers crossed.
Nope, doesn’t work.
With this I give up on any Amazfit/Huami watches (and all other products).
When clearly pointing out that Stratos 3 and the iOS Zepp app doesn’t work, total silence from the Amazfit support.
Never have I had a worser customer experience but I guess that I shouldn’t expect more..