Does anyone noticed that the AI makes phone to act unexpected?
For example my bt earbuds, speaker gets connected/disconnected for no reason sometimes .. for example I go to smoke at work, bt speaker stays at workplace, coming back, connecting my phone to speaker, starting to work and suddenly after some time music just stops. I see I'm connected to a speaker in Bluetooth settings, but once I start music again, music is playing thru the phone speaker instead. And I have to reconnect to a speaker again.. and it continues like that till I reboot my phone..
If I plug in fabric earphones which comes with phone, sometimes automatically music is started, sometimes after couple minutes, sometimes never.
Call recording apps/and overall all apps are killed without a reason even excluded from all battery optimations/savers.
Also never knew that I have so many different songs after trying different music player, have anyone noticed that also?
In my case I have about 200 songs in my library, but with default music player, it seemed that I have like 20songs only.. always listening on shuffle mode.
Related
The problem that I am having is that every time my phone connects to my truck (Ford sync) the music app opens and it starts playing. So I stop it and shut down the music app, but after I hang up from a call it starts back up. The first few days I had it there was no problem cause I didn't have any music on it yet, but now it does.
I have even gone as far as installing ATK and completely stopped that task, just to have it start up again after I hang up from a call.
Also, does anyone know if it is possible to get audio data over bluetooth?
I would like to see what song is playing over bluetooth on my dash.
I recently purchased some Nokia BH-505 bluetooth headphones. I like them and I primarily use Pandora to listen to music. I'm having a periodic issue where the headphones sort of disconnect and quit playing music. This only happens when I choose to turn the screen off. If I keep the screen on, I never have any disconnect issue. Pandora is happily still streaming music though, and if I power off the headphones, the phone/pandora realizes that it's no longer connected and starts playing through the speaker of the phone (that's why I say "sort of" disconnecting). If I power the headphones on again, they connect, pandora pauses, then I can resume play and then a short time after the condition happens again (if I turn the screen off). I imagine it's some sort of memory related thing because it seems if I make sure I have no programs running in the background things seem to work as desired. I haven't found any sort of setting to tweak, and neither Pandora or any bluetooth like program is in an autoclose list.
Anyone have any ideas on any workarounds to this issue?
Hi,
Before custom ROMS were built on ICS, when I was listening to streaming music in my car (via bluetooth), the phone would automatically stop playing when the car turned off. Same thing if I'm listening to music and I pull the headphones out, whatever was playing gets paused.
Now, when I turn my car off, the music doesn't stop playing, it just starts playing through the phone's speaker.
So my question is, is it the ROM that makes a player pause on disconnect or is it the actual APP that decides to either stop or keep playing through the speaker.
I know PowerAMP has options to auto play and auto stop on disconnect, but other apps like youtube, Audiostation (for my synology NAS) and a few others don't have settings.
Nic2112 said:
Hi,
Before custom ROMS were built on ICS, when I was listening to streaming music in my car (via bluetooth), the phone would automatically stop playing when the car turned off. Same thing if I'm listening to music and I pull the headphones out, whatever was playing gets paused.
Now, when I turn my car off, the music doesn't stop playing, it just starts playing through the phone's speaker.
So my question is, is it the ROM that makes a player pause on disconnect or is it the actual APP that decides to either stop or keep playing through the speaker.
I know PowerAMP has options to auto play and auto stop on disconnect, but other apps like youtube, Audiostation (for my synology NAS) and a few others don't have settings.
Click to expand...
Click to collapse
I think the fact that some apps have the option indicates that at very least, the app does have some control over it. I don't know if the ROM/kernel have some default setting built in for apps that don't define it.
It seems to be a feature missing in ICS. I'm hoping it shows up by the final update.
I use Tasker to accomplish the same thing. The whole task for media is when I plug headphones in, it launches a menu with media apps (music, netflix, etc) and turns the media volume up to 6. When disconnected, it mutes media volume, pauses media, and returns to the homescreen.
I'll take a look at that in the interim, all I really need is it just to pause on BT disconnect like it use to. The is already a separate volume setting for BT vs the headphone jack. Thanks for the tip.
That's interesting, I didn't know tasker had something to pause media. I'll definitely give that a try.
I believe that was an AOSP tweak..my Inc running CM7 would pause on bluetooth disconnect.
Sent from my ADR6425LVW using XDA
Hello all,
I am having a problem getting the phone part of my new DNA to work with blue-tooth in my car. The A2DP works great but after I answer or make a phone call with my Car Stereo (eclipse 3200) I cant hear anything and they cant hear me. If I use the dial-pad on the phone to make a call I hear the tones from the button pushes but nothing after the call is connected.
Thanks for any help or suggestions
chooven said:
Hello all,
I am having a problem getting the phone part of my new DNA to work with blue-tooth in my car. The A2DP works great but after I answer or make a phone call with my Car Stereo (eclipse 3200) I cant hear anything and they cant hear me. If I use the dial-pad on the phone to make a call I hear the tones from the button pushes but nothing after the call is connected.
Thanks for any help or suggestions
Click to expand...
Click to collapse
I have a Sony bluetooth player in my car and it will not even recognize the device.
Edit: It was a user error on my part. I have successfully paired and it works flawless.
xentheosx said:
I have a Sony bluetooth player in my car and it will not even recognize the device.
Click to expand...
Click to collapse
My car recognizes and pairs with the DNA, but it will only play the first 1-2 seconds of music, then the radio stops receiving any audio. Sometimes it works properly and will play songs completely, but the majority of the time, it will cut out. I can pause and unpause it, and I'll get 1-2 seconds of music, then it stops again.
Also, any high pitched sounds (ie. cymbals, percussion, etc.) are very distorted. I had this same issue on the Thunderbolt The Galaxy Nexus I had for the past year had no issues and sounded perfect over bluetooth.
I am disappoint.
eleazar123 said:
My car recognizes and pairs with the DNA, but it will only play the first 1-2 seconds of music, then the radio stops receiving any audio. Sometimes it works properly and will play songs completely, but the majority of the time, it will cut out. I can pause and unpause it, and I'll get 1-2 seconds of music, then it stops again.
Also, any high pitched sounds (ie. cymbals, percussion, etc.) are very distorted. I had this same issue on the Thunderbolt The Galaxy Nexus I had for the past year had no issues and sounded perfect over bluetooth.
I am disappoint.
Click to expand...
Click to collapse
I think the phone just has bluetooth problems in general, or BT4 is just not 100% backwards compatible. I have a Pioneer stereo, and never had any problems with any of my android devices (OG Droid, Droid X, inc2 and gNex) connecting, but when I connect my DNA, it actually crashes the phone process on the handset and it restarts (the process, not the handset). It still appears to be connected to the stereo after that, but I haven't tried making a call yet.
Stereo doesn't support BT streaming, so I can't test that. Has an SD slot, and that's all I ever use.
I'm having the same problem. My music will play for about 3 seconds, then goes silent. The car says I'm still connected, Google Music is still playing, but it mutes out. Was having fun while driving hitting the pause/play button to listen to a song 3 seconds at a time. Does anyone know if this is a OS problem, hardware problem or incompatibility, or other problem? I didn't see many posts about this elsewhere and haven't heard back from Verizon.
eleazar123 said:
My car recognizes and pairs with the DNA, but it will only play the first 1-2 seconds of music, then the radio stops receiving any audio. Sometimes it works properly and will play songs completely, but the majority of the time, it will cut out. I can pause and unpause it, and I'll get 1-2 seconds of music, then it stops again.
Also, any high pitched sounds (ie. cymbals, percussion, etc.) are very distorted. I had this same issue on the Thunderbolt The Galaxy Nexus I had for the past year had no issues and sounded perfect over bluetooth.
I am disappoint.
Click to expand...
Click to collapse
Working fine for me with my Kenwood. Music does skip occasionally, but my other phones (galaxy nexus, thunderbolt) have done that too.
Sent from my HTC6435LVW using Tapatalk 2
For all of us who suffer a HTC Toyota combo and the dreaded bluetooth pause issue I believe I have found the issue and got a working solution !
From what I gather, the HTC music player sets the bluetooth player state to pause when leaving the music player and most other apps do not set it back to streaming. I found one which does, so a simple solution !
1. Start and stop a piece of music with the Fplay music player and it will reset the bluetooth player state to streaming. I put a widget on the home screen.
2. Start your other apps and enjoy streaming sound again.
3. Enjoy
Fplay
https://play.google.com/store/apps/details?id=br.com.carlosrafaelgn.fplay&hl=en
Three minute video for those who would rather watch than read.
http://www.youtube.com/watch?v=ogvHjD8Aoj4
Has anyone else found their S9 now automatically turns shuffle on when it connects to a BT device?
I have tried a couple of different BT music devices (my truck, DAC, headphones) and every one of them automatically turns on shuffle when it starts playing music.
Example; drove to work listening to music NOT on shuffle. Get in truck for lunch or to go home and phone automatically starts playing music, but shuffle is now turned on.
I've started playing music via the speaker and made sure that shuffle is off, turned truck on, automatically connects... turns on shuffle.
I can plug in a wired device and it's fine.
Anyone else seeing this behavior?
wlrottge said:
Has anyone else found their S9 now automatically turns shuffle on when it connects to a BT device?
I have tried a couple of different BT music devices (my truck, DAC, headphones) and every one of them automatically turns on shuffle when it starts playing music.
Example; drove to work listening to music NOT on shuffle. Get in truck for lunch or to go home and phone automatically starts playing music, but shuffle is now turned on.
I've started playing music via the speaker and made sure that shuffle is off, turned truck on, automatically connects... turns on shuffle.
I can plug in a wired device and it's fine.
Anyone else seeing this behavior?
Click to expand...
Click to collapse
Yes! I've also found that shuffle will come on at random times after it's connected as well. It's driving me nuts!
RobFreundlich said:
Yes! I've also found that shuffle will come on at random times after it's connected as well. It's driving me nuts!
Click to expand...
Click to collapse
Great!!... I think, lol... at least it isn't just me.
I have a note 8 and have this same problem when connecting to my 2016 jeep Cherokee ( Uconnect ) radio
go into the google play music app in the app manager, delete data and cache, relaunch the app