Hi
I have Asus Zenfone 2. It is stuck on android logo with red exclamation mark. I have tried to load the recovery mode but it does not work. The phone does not enter in recovery mode it just restarts and display same logo again. I do not have any authorized asus support nearby so I got it checked with some random tech guys. They said that they are unable to find firmware for that model.
Help Required
Hi if you are unable to enter into recovery (droid mode) try this:
Make sure your device is off if not press again long power button. Now press together Vol + and Power button at the same time , it will vibrate but don't release keys , once ASUS logo appear release both keys and fast press just Vol - button several times until you see USB logo and Droid Boot screen and do factory Reset . This should fix the problem , if not follow my completely post .Those files for FSTK I found inside old stock firmware in my case inside ifsw folder I think.
Post:
https://forum.xda-developers.com/android/help/asus-fonpad-7-fe170cg-bricked-stuck-t3740819
Stock firmware :
http://dlcdnet.asus.com/pub/ASUS/Ze...77.679749972.1518829604-1765041205.1518829604
Flash tool :
https://drive.google.com/file/d/0B9rp3AJHKJXjNmRuRUJMWmtOT3c/view
Raw Firmware for ASUS flah tool:
https://drive.google.com/file/d/0B3x4WC7bMXg3NHk0T09halRlNkE/view
If you need help , contact me back .
Thank you! I will try that
Related
I got a tablet device (Omega OT107) I've rooted it using
Code:
ro.kernel.qemu
method.
Next I'm triying to flash Custom Recovery and my problems started here.
What I've tried:
1.
Code:
flash_image recovery
- no success process of flashing never ends
2. Install bootmenu to /data/bootmenu
3. Installed 2 different 2Init's
None of this worked or even had an impact on how device works (it always boots in android correctly).
I've tried to boot it to fastboot mode to flash recovery from there but there is a problem that I have.
Volume(up or down) + Power buttons starts device to Android not to bootloader (I've read you need to remove and reinsert battery to make it work, but device has a build in batery and needs to be taken apart to remove it so I did not tryed it)
Code:
adb reboot bootloader
- boots to what I think is a bootloader (screen is black(no light is comming out of it)) when connected to Windows PC it is seen as Android Bootloader Interface (Android-SDK driver).
Code:
fastboot devices
does not discover any devices, clicking volume or power button does nothing.
Code:
adb reboot recovery
- boots devices it what seems to be useless recovery mode. At start there is a standing android dude with fireball on his chest, and imidietly changes to a lying position with his chest oppened and an exclamation mark comming out of it (I've red it is ok and I need to press Volume(down/up) + Power buttons to open recovery menu but it does not happen).
My question is:
Is it normal to some devices bootloader to look like mine? How to make it discoverable to fastboot?
I had this issue and I fixed with "press all the buttons!" and suddenly I sow recovery menu...to factory reset. if it doesn't work repeat with rebooting with pin
Does someone knows a way how to hard reset this thing?? ^^
about firmware
Any idea where find the firmware for this tablet?
Mine is now freeze on recovery logo
hard reset OT107
1.Turn off our tablet.
2 We press the MENU button at the same time + POWER HOUSE click and hold
3.Wait until the Android image.
4.Then VOL + button and the POWER and appears to us to Recovery Mode
5.Navigation is Vol-i + and confirmed by pressing POWER.
Hey guys,
Iv got a stock US tablet Z, SGP311 on 10.4.1.b.0.109
Iv tried holding power and volume + while booting to get into stock recovery, iv tried tapping Vol+ a few times while booting, iv tried holdin Vol+ for 3 seconds and then hitting power......i cant get this damn thing into recovery!
Can someone help??
Snazarian said:
Hey guys,
Iv got a stock US tablet Z, SGP311 on 10.4.1.b.0.109
Iv tried holding power and volume + while booting to get into stock recovery, iv tried tapping Vol+ a few times while booting, iv tried holdin Vol+ for 3 seconds and then hitting power......i cant get this damn thing into recovery!
Can someone help??
Click to expand...
Click to collapse
There is no Recovery Mode in the XTZ's stock firmware. Here is how to access the available functions of the stock firmware.
1. Power On
Press and hold the POWER button until notification light flashes once, then release POWER button.
2. Power Off
Press and hold the POWER button until menu appears, then select "Power off" and "OK".
3. Restart
Restart device to turn off all running applications and to free up memory.
3.1. Simultaneously press and hold the VOLUME UP and POWER buttons for 10 seconds.
3.2. After the notification light flashes three times, release the buttons.
3.3. The device will power off automatically.
3.4. After the device is powered off, power on the device.
4. Reset
Reset device to its original settings to free up memory.
Don't forget to back up any important data saved on the device!
4.1. Go to Settings > Backup & reset > Factory data reset > Reset tablet.
5. Enable Safe Mode
5.1. Power off the device.
5.2. Press and hold the POWER button until the notification light flashes once.
5.3. Wait until the Xperia™ logotype disappears.
5.4. Press and hold the VOLUME DOWN button.
5.5. The device will restart in Safe Mode.
5.6. To exit Safe Mode, restart the device.
6. Flash Mode
6.1. Power off the device.
6.2. Connect a USB cable to the device.
6.3. Press and hold the VOLUME DOWN button.
6.4. Connect the USB cable to a computer.
6.5. Wait until the notification light flashes red-green once, then release VOLUME DOWN button.
6.6. To exit Flash Mode, disconnect the USB cable.
7. Fastboot Mode.
7.1. Power off the device.
7.2. Connect a USB cable to the device.
7.3. Press and hold the VOLUME UP button.
7.4. Connect the USB cable to a computer.
7.5. Wait until the notification light flashes red then solid blue, then release VOLUME UP button.
7.6. To exit Fastboot Mode, disconnect the USB cable.
8. Service Menu
8.1. Start the Contacts app.
8.2. Go into Settings.
8.3. Touch the blank area at middle bottom of screen for at least five seconds then stop touching screen.
8.4. "Enter service mode" button will be displayed.
8.5. Press the "Enter service mode" button.
8.6. Enter *#*#7378423#*#* (*#*#SERVICE#*#*).
8.7. Service menu will be displayed.
8.Notes.1. Enter *#*#4636#*#* (*#*#INFO#*#*) to display testing information.
8.Notes.2. Enter *#*#73556673#*#* (*#*#SELLMORE#*#*) to toggle Demo Mode activation on/off. WARNING! Activating Demo Mode will delete all personal content (photos, etc.) and settings.
How do you flash CM then ?
Cat McGowan said:
There is no Recovery Mode in the XTZ's stock firmware.
Click to expand...
Click to collapse
Thanks for telling ! I had been looking for this information for a long time.
Apparently, my service info says "bootloader unlock allowed: yes", I wonder if it means that I actually unlocked it or that the device would accept me to do it.
I moreover wonder how one can manage to install CM or root its device without using Recovery Mode. I saw on your signature you rooted your device. May I ask how you did that ?
ducasse.isidore said:
Thanks for telling ! I had been looking for this information for a long time.
Apparently, my service info says "bootloader unlock allowed: yes", I wonder if it means that I actually unlocked it or that the device would accept me to do it.
I moreover wonder how one can manage to install CM or root its device without using Recovery Mode. I saw on your signature you rooted your device. May I ask how you did that ?
Click to expand...
Click to collapse
It means your bootloader CAN BE unlocked.
To install a ROM, such as CM, you first unlock your bootloader, then move the ROM zip to your device. After that, you flash the included kernel from the zip with fastboot. Then, you boot into the included recovery from the kernel and flash the whole ROM.
Sent from my LT26i using Tapatalk
Felimenta97 said:
It means your bootloader CAN BE unlocked.
To install a ROM, such as CM, you first unlock your bootloader, then move the ROM zip to your device. After that, you flash the included kernel from the zip with fastboot. Then, you boot into the included recovery from the kernel and flash the whole ROM.
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
I finally found a solution to my problem : I unlocked the device using flashtool-0.9.11's gui procedure, instead of flashtool's fastboot. It succeeded and I can successfully flash anything I want on the device.
I found your rational approach to my problem useful. It helped me isolate a solution. Thanks !
Hi there
I know this is an old thread. But my problem is same. I got this devide called sony experia tablet z lte ntt docomo x variant
My problem is that it got a lock screen and i have forgot the password. So i want to reset it.
But the problem is how do i do that, there isnt a recovery on this thing.
I was playing around with the buttons and i dont know how ,or which combination i pressed the tab booted to a factory reset screen but i wanst sure to reset that time so i exited from that and tablets lock screen appeared.
And now i cant figure out that how to do this again. Please help me
......
Hi there
I know this is an old thread. But my problem is same. I got this devide called sony experia tablet z lte ntt docomo x variant
My problem is that it got a lock screen and i have forgot the password. So i want to reset it.
But the problem is how do i do that, there isnt a recovery on this thing.
I was playing around with the buttons and i dont know how ,or which combination i pressed the tab booted to a factory reset screen but i wanst sure to reset that time so i exited from that and tablets lock screen appeared.
And now i cant figure out that how to do this again. Please help me
......
Press and hold the Power and Volume Down keys for 10 seconds.
The device will reset and restart.
HELP! Blue Wave 8 33GT tablet stuck in recovery mode with "No command" message
I got my Blue Wave 8 33GT (not HD+) tablet completely bricked. First of all, I know this is not really a popular device and some of you might not have a single knowledge about this one, but I hope in any way you might help me get this device working again. Thank you in advance!
Some info about this device:
Bluewave's website: Wave 8
Android OS version: 4.4 KitKat
Device processor: Rockchip-based (RK31)
What just happened? It suddenly reboots while I'm playing and gone into recovery mode with an Android and a "No command." message. Now it won't boot the system anymore whenever I reboot, it always going into this recovery mode.
It has no volume buttons, just a reset, a hard back button and power button. Holding down the power and back button goes into the recovery mode directly. Through normal boot, it flashes the Bluewave logo twice then goes into the recovery. While the reset button immediately turn the device off. There's nothing else I can think of that I can do in this case.
My laptop can recognize it as an ADB Device in recovery mode and I think I may be able to flash it via Rockchip BatchTool, but the instructions I've read states that the device should be up and with a USB debugging enabled which I am not currently able to do in recovery mode. Device is rooted and working totally fine until this happened.
Anyone got into this kind of problem and able to go through it? Please, any help is greatly appreciated.
P.S
Just let me know if there are any additional info I could give you.
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
AutomaticSearches said:
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
Click to expand...
Click to collapse
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Humble Potato II said:
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Click to expand...
Click to collapse
May be this site help: http://bluewave-global.com/wave_8.php#frame4
"Long press the power button to restart the device. If restarting fails, hard reset the tablet by poking the Reset hole using a pin. " it is from FAQ
maybe this could help.
1. Press the power button to get the option menu for
Power off
Reboot
Silence phone option.
2. on that menu you have to hold down that power off option on your touch screen while also holding down the home push button on the side of your tablet.
3. This brings up a screen to reboot into safe mode..(these are the 3 steps the company does not tell you that is why no one gets it to work.
4. HIt yes for safe mode and then hold down your power and home buttons on side of tablet till the dopo Logo appears.
5. Release both buttons and hit the power button one time and then hold only the home button down till a menu option appears.
6. Use the home button to move down to factory reset and press the power button to select. Once it says complete then use the power button to select reboot.
Problem solved. Hope this will help everyone out.
The only way is to remove the battery, attached again the battery then power it on their is no hard reset on blue wave the go to settings factory reset
Hello guys ,please forgive my ignorance, a few days ago ı downloaded an application to my asus k011 and honestly the internal memory was almost full (someting 3,80gb) it got so slow and turned off by itself, now freezes on ASUS Logo never starts, no access to recovery mode, (Pressing home+volume up doesn't get me there either) when ı connect it to a pc, pc recognizes it as android device but not as K011 , ı have tried adb commands(recognizes the device as abcdefg1234567890 on command prompt) it did not work also, ı have heard that it is possible to recover it's recovery mode via xfstk downloader but ı couldn't find it's firmware image file. Sorry for writing too much
Had similar problem look on my post asus fonpad 7 hard bricked .
But first try this:
make sure your device is off if not press long power button. Now press together Vol + and Power button at the same time , it will vibrate but don't release keys , once ASUS logo appear release both keys and fast press just Vol - button several times until you see USB logo and Droid Boot screen and plug back usb cable .
Link only Indian models
Caution may brick your phone
https://download.c.realme.com/osupdate/RMX1921EX_11_OTA_1010_all_yuEH87qmmZhw.ozip
This update was stopped by realme because of damaged phones - do you really think it's a good idea to post that link?
About the Bugs
i have read on twitter, that this update still has plenty of Bugs
i there anybody willing to give the list of the Bugs?
Realme ST bootloop after update to realme UI V1.0
Mottalib Saju
2020.02.12 07:37:49
33 Views
3
0
Follow
from this site I have download the realme UI V1.0 in phone storage download folder. Then I followed this stape - 2. for the Recovery Mode which is mentioned that site.
I power off the phone. I Pressed and hold the Power and Volume Down buttons, until your phone enters Recovery Mode. Choose the language English. then clicked on the firmware and confirm to update. But after that phone goes to boot loop, only showing realme logo and some seconds later again restarting the phone. even it is not going fastboot mode by Pressing and hold the Power and Volume Down buttons.
At this moment what should I do. Even tried to go fast boot mode by pressing volume+, volume - and power button. please give me the solution for Realme XT.
chiru369 said:
Realme ST bootloop after update to realme UI V1.0
Mottalib Saju
2020.02.12 07:37:49
33 Views
3
0
Follow
from this site I have download the realme UI V1.0 in phone storage download folder. Then I followed this stape - 2. for the Recovery Mode which is mentioned that site.
I power off the phone. I Pressed and hold the Power and Volume Down buttons, until your phone enters Recovery Mode. Choose the language English. then clicked on the firmware and confirm to update. But after that phone goes to boot loop, only showing realme logo and some seconds later again restarting the phone. even it is not going fastboot mode by Pressing and hold the Power and Volume Down buttons.
At this moment what should I do. Even tried to go fast boot mode by pressing volume+, volume - and power button. please give me the solution for Realme XT.
Click to expand...
Click to collapse
Don't trust these kind of updates.. you can go into fastboot just pressing power button and volume down button.. then flash twrp and then orangefox download the latest update from the realme site. Reminder only orangefox can flash ozip files as I know. If it boots into recovery again after you wipe data and restart phone. then wipe data again then it should hopefully boot.