When I flash recovery through flashy and then open recovery mode it says
Security error : this phone has been flashed with unauthorized software & is locked. Call your mobile operator for additional support. please note that repair for this issue may have additional cost
Fastboot commands says failed remote unlock command
Help me !!!
Have you rooted mobile
I get same problem while flashing Lyf wind 7i twrp remote unknown command I need root if u know how to root Lyf wind 7i please tell me
i have LYF wind 7 (LS-5016) model and want to flash TWRP recovery Tthrough ADB driver. But during unlock bootloader i'm facing FAILED (remote: unknown command) message
please fixed the issue and provide solution .
Related
Hello, im in terrible situation, my huawei y300-0100 is stucked in bootloader, i can access the recovery but it doesnt flash any firmware that i tried . including 175 and 189 general firmware. i knew the bootloader is locked so i requested the unlock code from huawei but in fastboot oem unlock code restarts the mobile and it gets stucked in tho the bootloader again.
the emmc is readonly and hence cant update. please tell me what to do.
is there a way to flash the firmware by adb, ? the adb , fastboot and sideload all are working but it doesnt write any changes to the emmc.
if the post is in wrong category please forgive me, although i have been a regular user , this is my first post.
Thank you , any help is appreciated.
Hello experts i am facing a real problem with my huawei y6 pro.
i want to Root my phone for this propose i setup adb on my PC,i connect my device in fastboot mode open cmd in adb,then i write the command as below,
fastboot oem unlock .....code here..
After pressing enter a confirmation was on the mobile screen about unblocking bootloader i Confirmed it then in cmd it shows that unlock successful.when i boot the phone my whole data was erased, so i was hopeful that now Root apps will work on my phone i tried kingroot app but it was still showing "Root strategy unavailable"
After it i planned to install custom recovery( i had a recovery for mtk devices)via fastboot mode ,i copy the recovery.img file to my adb folder rebooted my phone to fastboot and tried this command
"fastboot flash recovery recovery.img"
It shows succeeded,
But when i tried to boot into recovery it was stock recovery,
Please experts help me what can i do now??
Sent from my HUAWEI TIT-AL00 using XDA Forums
prior the flash try
fastboot erase recovery
then flash it
yasitoo said:
prior the flash try
fastboot erase recovery
then flash it
Click to expand...
Click to collapse
Thanks for reply i tried it ,
It shows ,
"Erasing ,recovery,...
Failed <remote: unknown command>
Finished. Total time:0.009s"
Sent from my HUAWEI TIT-AL00 using XDA Forums
Tajamal said:
Thanks for reply i tried it ,
It shows ,
"Erasing ,recovery,...
Failed <remote: unknown command>
Finished. Total time:0.009s"
Sent from my HUAWEI TIT-AL00 using XDA Forums
Click to expand...
Click to collapse
i'm not pro but you may have bad drivers or device is not completely unlocked,
try to completely uninstall any adb/device driver on your pc and install those ones,
besides that, check if device is detected with this command
Code:
fastboot -l devices
then try again with
Code:
fastboot erase recovery
fastboot flash recovery recovery.img
goodluck.
yasitoo said:
i'm not pro but you may have bad drivers or device is not completely unlocked,
try to completely uninstall any adb/device driver on your pc and install those ones,
besides that, check if device is detected with this command
Code:
fastboot -l devices
then try again with
Code:
fastboot erase recovery
fastboot flash recovery recovery.img
goodluck.
Click to expand...
Click to collapse
I guess my phone's bootloader is not unlocked actually i was unable to find unlock code because huawei website was showing an error i ask about this problem in open forum a person ask me to provide him imei+product ID i give it to him then he give me unlock code and i think problem is caused by wrong code the command is just erasing my memory but bootloader is still locked,
So can you help me to find unlock code?
Here is my mobile information
Serial Number
#AVY9KA9631123629
IMEI#******************
Product ID #11680402
Sent from my HUAWEI TIT-AL00 using XDA Forums
Tajamal said:
I guess my phone's bootloader is not unlocked actually i was unable to find unlock code because huawei website was showing an error i ask about this problem in open forum a person ask me to provide him imei+product ID i give it to him then he give me unlock code and i think problem is caused by wrong code the command is just erasing my memory but bootloader is still locked,
So can you help me to find unlock code?
Here is my mobile information
Serial Number
#AVY9KA9631123629
IMEI#***********
Product ID #11680402
Sent from my HUAWEI TIT-AL00 using XDA Forums
Click to expand...
Click to collapse
don't give your imei like that for anyone asking for it, besides that, ican't help you with the unlock code, you would better contact huawei to get the code or resolve the error,
PS : i suggest you to remove your imei from post.
yasitoo said:
don't give your imei like that for anyone asking for it, besides that, ican't help you with the unlock code, you would better contact huawei to get the code or resolve the error,
PS : i suggest you to remove your imei from post.
Click to expand...
Click to collapse
Bundle of thanks brother i will try again from huawei website,
Actually i am from Pakistan & here is a lot of websites are blocked that why i was asking to you,if you could try it for me from your internet it will resolve my issue,
Sent from my HUAWEI TIT-AL00 using XDA Forums
Bootloader unlock failed in my huawei y6 pro TIT-AL00 plzzz help me
00saravana said:
Bootloader unlock failed in my huawei y6 pro TIT-AL00 plzzz help me
Click to expand...
Click to collapse
How did you try to unlock your phones bootloader?
There is no need of unlocking code just command " fastboot oem unlock" and that's it now check your boot loader status with command on fastboot and it Will show you unlocked,
But there is no benefits to unlock this phone you will never find a Root solution for this phone,so it is recommended from me that stay with locked phone,& if you found any suitable custom ROM just flash it with PC without backup,other then that so far i didn't found any safe solution.
Sent from my HUAWEI TIT-AL00 using XDA Forums
So I registered with Huawei and got my registration ID to unlock my Honor 9. I rebranded the phone using this guide, when I got to the point of re-entering the unlock key the phone got locked and the key doesn't work anymore giving the error Failed: (remote command not allowed). I cant access the phone since the script from the guide didn't get to install the system and now I don't even have TWRP installed.
Please help
rassoali said:
So I registered with Huawei and got my registration ID to unlock my Honor 9. I rebranded the phone using this guide, when I got to the point of re-entering the unlock key the phone got locked and the key doesn't work anymore giving the error Failed: (remote command not allowed). I cant access the phone since the script from the guide didn't get to install the system and now I don't even have TWRP installed.
Please help
Click to expand...
Click to collapse
Hi, more info about Phone pls.
model, version, location, status FRP (oem) or screenshots fastboot..
Good morning,
I'm trying to root this Huawuei Y6 II 2017 l_21 factory resetted but it's becoming very very hard, cause i've try every single method and nothing work.
The device is debug USB and OEM unlocked, and even bootloader unlocked and FRP unlock.
I've installed USB drivers on my window 7 ( and some of them didn't install correctly ).
The device connected correctly to hi suite but it's full upgraded android 6 emui 4.1.x.x Kirin620
-I've tried kingoroot both pc and apk
-I've tried Manual rooting with mini adb and fastboot plus TWRP 3.0.2 of this guide ( https://forum.xda-developers.com/android/general/rooting-huawei-y6-ii-cam-l21-t3501162 ) and TWRP 3.1.1-0
but when i'm launching the command fastboot flash recovery TWRPxxx.img it gives me that:
target reported max download size of 471859200 bytes
sending 'recovery' (25152 KB)...
OKAY [ 0.736s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.743s
Actually i've asked for a new unlock bootloader code to huawuei, but i have even tried to get the code with dc-unlocker following this guide ( https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code ) and even in this case my PC didn't find the mobile phone.
So Actually i have 2 major issues:
1) Why i got the error in ADB ?
2) why my pc even with USb drivers didn't find correctly the device in order to let dc unlocker find the bootloader code?
My objective is to root the Phone and recover deleted data by factory reset, but i don't know what to do now.
help!
jackielong said:
Good morning,
I'm trying to root this Huawuei Y6 II 2017 l_21 factory resetted but it's becoming very very hard, cause i've try every single method and nothing work.
...
1) Why i got the error in ADB ?
2) why my pc even with USb drivers didn't find correctly the device in order to let dc unlocker find the bootloader code?
My objective is to root the Phone and recover deleted data by factory reset, but i don't know what to do now.
help!
Click to expand...
Click to collapse
This is weird to me, because the error message in fastboot it what you get when you've not unlocked the bootloader (allowed to read, not write).
And the fact that fastboot and ADB recognized your device means that on the USB drivers side, you've a correction set up...
So I'd say that the bootloader isn't unlock at first glance. And unfortunately I don't know any ways of unlocking Huawei phones now...
I didn't know DC unlocker and I can't certify if this software is legit or not, nor provide you help regarding the software.
So I don't think you'll be able to successfully root your device. But that's just what I think, maybe someone more experienced will find the solution.
Have a good day
Even if one finds a TWRP image that at 100% matches his/her device, it's not a good idea to flash it: instead boot into it
Code:
fastboot boot twrp.img
BTW: Doing so has the additional advantage that TWRP doesn't get detected.
Hi Please help for this ..
I have Redmi 8 (China) and sim port is broken , Currently i can't use any goolge service , so i want to change global or some other rom . Sim port is broken so can't add Mi account Official unlocking way . I tried with these cmd fastboot flashing unlock and it show
FAILED (remote: 'Token verification failed, reboot the device')
fastboot: error: Command failed . how can i unlock boodloader ?
i dont think there is another way
do you have any other phone that you can recieve the sms activation for mi account
LR7875 said:
do you have any other phone that you can recieve the sms activation for mi account
Click to expand...
Click to collapse
yes I have
chanmyae.emc said:
Hi Please help for this ..
I have Redmi 8 (China) and sim port is broken , Currently i can't use any goolge service , so i want to change global or some other rom . Sim port is broken so can't add Mi account Official unlocking way . I tried with these cmd fastboot flashing unlock and it show
FAILED (remote: 'Token verification failed, reboot the device')
fastboot: error: Command failed . how can i unlock boodloader ?
Click to expand...
Click to collapse
By the official method, you have to add your Mi account to that device, turn off WiFi, and turn on the mobile data, so without a SIM inserted you can´t do it.
Fastboot flashing unlock command, only worked for Xiaomi devices with Android One, for the rest you have Mi Unlock tool.