Hola everyone,
As we all know Xiaomi didn't gave us nougat update for Kenzo. So our only option is Custom ROMs.
Can someone please advise me which is best Miui 9 nougat ROM for Kenzo, with least bugs.
Volte is a must please.
Thank you!
No doubt., Epic Rom miui 9+ userxp patch if you have 2gb ram device. Volte, GCAM with potrait, lots of customization ,face unlock. Every thing working perfectly . You will get 1gb of free ram out of 2gb by applying USERXP patch.
Miui pro based Rom are good but there is huge laging issue on kenzo. So I preferred Epic miui9 N
I am using Epic MIUI 9 7.12.1 which best custom miui Rom I ever used. Battery backup is very good with latest Agni 12.2 .
I have ever use
Miui.am 8.2.8 port from Orochixxx
Can you share the link of user xp patch ? Thanks
https://forum.xda-developers.com/showpost.php?p=73803980&postcount=589
you have to use same version of patch as your Epic rom's version
EPIC 7.12.1 is most stable .
add face unlock -http://www56.zippyshare.com/v/dZGS3P5K/file.html
volte fix if need( no need if you flash latest firmware 8.2.1)-https://androidfilehost.com/?fid=889964283620761693
recovery- wipe data, cache , delvik, -flash firmware- flash Rom- flash AGNI 12.2-wipe cache delvik cache-Reboot system-Boot to recovery-flash magisk- Reboot system- again recovery- flash USERXP PATCH- reboot system- again recoverey - flash face unlock file- complete
hey please help i followed each step still device is stuck on epic rom boot logo for 10-15 mins, what to do?
which recovery you are using ?
used both zcx and twrp but still stuck on bootlogo
---------- Post added at 07:11 PM ---------- Previous post was at 07:08 PM ----------
can you please tell what to do ?
use zcx recovery only . Try to clean flash rom , then flash Lazyflasher and wipe cache then reboot system . waith for 15-20 mins
Okay bro i will try it again , thanks a lot
---------- Post added at 08:50 PM ---------- Previous post was at 08:06 PM ----------
Bro i tried to flash in following manner:
1.Wiped data , Dalvik, cache system
2. Flashed rom.
3.flashed lazyflasher.zip
4.rebooted and waited for 25 minutes
Still stuck on that logo its not going further where am i wrong?
ok , don't worry . tell me which epic version you are using.
i tried 7.12.1 Based on MIUI developer global v2 New
https://www.androidfilehost.com/?fid=817906626617950536
and 7.12.28 both and waited for half an hour too used lazy flasher as well ! :?
Hi! I'm using Epic ROM MIUI9 with AGNI kernel and TWRP.
Wipe data, cache, dalvik, system, then flash rom, kernel, stock firmware, magisk (for root), gapps included (flashing other versions might cause bugs) and enjoy.
With all custom roms I have the same problem: after a while they become slow and just boring, so I flashed almost in every month a new one... until this came out.
in how much time did your device booted up?
then just flash Nitrogen os or any other custom os based on stock android without GAAP . lets check is there any problem with system .
If you able to boot successfully then in the advance wipe wipe internal storage also ( then select reboot to recobery in twrp otherwise you will see NO OS ERROR if you reboot to system) . then flash firmware from this link
https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
(the one without emmc) then follow all needed steps . FIRMWARE SHOULD BE DEVELOPER ONE
I hpe this will help you .
The first boot was not longer than 5 minutes, BUT: all I did is up there, no lazyflasher stuff that I never heard about.
Which version of epic rom do you recommend?
Can you tell me if Epic ROM supports Sunlight Display (adaptive contrast) also with Agni kernel? ty
Related
Elastic Rom
Based on Stock Deodexed P5200 & P5210
Features
Deodexed
Zipaligned
Super Fast
Note 5 Iocns
S6 Toggles
Note 5 Sounds - Boot animation
Debloated
Tab 4 launcher without google search
Tab 4 Weather widget
Build prob Tweaks
Note 5 and S6 Wallpapers
Bravia Engine 4
Replaced Clock and Calculator with google clock and material calculator
Added Lite Clean master
Tab S File Manger
Note 4 Memo
S5 SPlanner
Bugs
-Can't Change Lockscreen Wallpaper From Touchwiz Launcher
-You have to flash Super Su and Google Gapps pico version
-Massaging app in v3.1 P5210 version Force closes
>go to settings and force stop it
Requirements
-You will need Latest TWRP form Download Section
-A Nanodroid Backup in case of anything
Installation
Step 1 - Download and put Rom, Supersu, and Gapps on SD Card
Step 2 - Wipe User Data
Step 3 - Flash Rom
Step 4 - Flash Supersu
Step 5 - Flash Gapps package
Step 6 - Wipe cache and dalvik
Step 7 - Reboot Device (Will take a few minutes on first boot)
IF It doesn't boot and stuck on Samsung logo just turn of the tab (long press 10 sec on power key) and open it again
Credits :
@ Restl3ss
@CAG-man
@Angel_666
@Chainfire
@faruqmunshif
@binh24
@UAdeveloper
@KhaledzZ
Testers Credits :
@scorch_wolf
@fcorbera73
@Steve1698
Changelog for v2:
Removed:
More system apps
Google Chrome
Xposed(Multiwindow - Amplify - Double tab to sleep - Menu to be Gone)
Added:
More tweaks
Replaced Music app with latest play music app
All in one for easy gesture control
Version 3 changlog
Updated google apps
removed unnecessary apps
added more tweaks
brought back stock settings
added bindroid's kernal in P5210 version
Version 3.1
P5210 Version Boots By butting stock Kernal
XDA:DevDB Information
Elastic Rom, ROM for the Samsung Galaxy Tab 3 10.1
Contributors
khaledreno
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.2.2 and above
Version Information
Status: Stable
Current Stable Version: 3.1
Stable Release Date: 2015-1-17
Created 2015-10-21
Last Updated 2015-1-17
XDA:DevDB Information
Elastic Rom, ROM for the Samsung Galaxy Tab 3 10.1
Contributors
khaledreno
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: P5200& P5210 Devices Only
Version Information
Status: Stable
Current Stable Version: 3.1
Stable Release Date: 2016-1-17
Created 2015-10-21
Last Updated 2016-1-17
Reserved
Download
P5200 (3G) Model
Elastic Rom v1 For : https://drive.google.com/open?id=0B0vba5CjnAIWTkkxMFdQNGFQdVU
Elastic Rom v3 : https://drive.google.com/file/d/0B0...=sharing&resourcekey=0-V48M2hBMkpXd-P74PPYaxA
Recovery :
TWRP Flash with Recovery : https://www.androidfilehost.com/?fid=24052804347820751
TWRP flash with ODIN : https://www.androidfilehost.com/?fid=24052804347820750
P5210 (WIFI) Model
Elastic Rom v2: https://drive.google.com/file/d/0B0vba5CjnAIWUm1oMjJ4TlQ5VFk/view?usp=sharing
Elastic rom v3 (need to replace boot.img with the test version) : https://drive.google.com/file/d/0B0vba5CjnAIWQ3RJeV9XekROUDA/view?usp=sharing
Elastic Rom v3.1 : https://drive.google.com/file/d/0B0vba5CjnAIWajJsYVFXWG9uWUU/view?usp=sharing
Recovery :
TWRP Flash with Recovery : https://www.androidfilehost.com/?fid=24052804347820759
TWRP Flash with ODIN : https://www.androidfilehost.com/?fid=24052804347820753
Must Download and Flash!
Chainfire's Super user flashable zip : https://download.chainfire.eu/396/supersu/
Gapps : http://opengapps.org/
(x86 > 4.4 > pico)
Oh! Nicely done
It's great to see support for this device! Do you plan on bringing this to P5210/P5220 as well? Also, how's the RAM usage on this one? I can't try this ROM for myself unfortunately because I have a P5210, but I'm interested in trying it out if you ever port it to my device. That being said, keep up the good work!
forrealgames145 said:
Oh! Nicely done
It's great to see support for this device! Do you plan on bringing this to P5210/P5220 as well? Also, how's the RAM usage on this one? I can't try this ROM for myself unfortunately because I have a P5210, but I'm interested in trying it out if you ever port it to my device. That being said, keep up the good work!
Click to expand...
Click to collapse
it is in my next update plan don't worry
Great!!!!
This sounds amazing. I have a p5210 (wifi model) i would really love to use this. How long do u think it would take for the next update?
scorch_wolf said:
This sounds amazing. I have a p5210 (wifi model) i would really love to use this. How long do u think it would take for the next update?
Click to expand...
Click to collapse
Next week i hope because i have exams
Next Update For Elastic Rom is P5210 (WIFI) build
Next week
Cant wait
khaledreno said:
Next Update For Elastic Rom is P5210 (WIFI) build
Next week
Click to expand...
Click to collapse
Ohhh cant wait. This looks amazing. I really like the look of the notification toggles. I hope you do well on your exams.
Looks beautiful !! :good::good:
Speed?
UAdeveloper said:
Looks beautiful !! :good::good:
Click to expand...
Click to collapse
Gonna be great. Is it fasst? Not sure if its fast because of the touchwiz ui. Dammn cant wait for next week.
I'm downloading this as I'm texting...looking forward to using it, I'm p5200,I hope my sd card ain't gonna suffer...lol,
---------- Post added at 11:31 PM ---------- Previous post was at 11:29 PM ----------
[/COLOR @Khalendreno ...this is great mate, happy to see development support for this ROM, excellent work...looking at that changelog hmmmm, interesting!!!
I'm curious boss, thaT MULTINDOW is it due to xposed framework???
---------- Post added at 11:40 PM ---------- Previous post was at 11:31 PM ----------
I was running the unofficial CM 5.1.1 before seeing this...you mentioned wiping SYSTEM ...what about data/cache/dalvik cache?
I'm asking this coz I was on lollipop and F2FS...I also guess that I must format my data and system back to ext 4
---------- Post added 29-10-2015 at 12:05 AM ---------- Previous post was 28-10-2015 at 11:40 PM ----------
So far so good...installed without errors...now on the installation settings!!
....Will reach back again with my test drive experience!!!
Thanx @Khalendreno good work mate, good work!!!
Im curious...
[email protected] said:
I'm downloading this as I'm texting...looking forward to using it, I'm p5200,I hope my sd card ain't gonna suffer...lol,
---------- Post added at 11:31 PM ---------- Previous post was at 11:29 PM ----------
[/COLOR @Khalendreno ...this is great mate, happy to see development support for this ROM, excellent work...looking at that changelog hmmmm, interesting!!!
I'm curious boss, thaT MULTINDOW is it due to xposed framework???
---------- Post added at 11:40 PM ---------- Previous post was at 11:31 PM ----------
I was running the unofficial CM 5.1.1 before seeing this...you mentioned wiping SYSTEM ...what about data/cache/dalvik cache?
I'm asking this coz I was on lollipop and F2FS...I also guess that I must format my data and system back to ext 4
---------- Post added 29-10-2015 at 12:05 AM ---------- Previous post was 28-10-2015 at 11:40 PM ----------
So far so good...installed without errors...now on the installation settings!!
....Will reach back again with my test drive experience!!!
Thanx @Khalendreno good work mate, good work!!!
Click to expand...
Click to collapse
Im curious dude, whats the rom like? Is it fast? Does multi window work properly?
Well I hate to trash any developers work...cuz this guys put so much time in doing this work ,testing and modding and porting ROms to our devices.....
I'm really grateful to them!!
Here is a list of what I really hated with ELASTIC ROM:
1.ROM use too much RAM, system ui stopped working more than 3x since installation and that message kept popping out, and when I click wait still comes back and when I click okay it reboots and still say samething system ui not responding and becomes unusable!!!
Frustrated,I reinstalled the ROM using my usual apps, multibooting, same thing happened again, system not responding, crash, reboot!!
2.the user interface is laggy but then again that's the reputation of TW
3.multiwindow?
...this is not straight out of the box, this is uSing xposed framework,xhalofloatingwindows,xmultiwindow,and multiwindowsidebar...
Meaning if you're new to the scene and not know how this modules work with xposed framework you're gonna get lost and frustrated!!
4.the preinstalled apps...
....the ROM is full of xposed modules, before I even install one of mines the list is already around 10 if not more...this shows that this ROM apart from note 5 icons , note 5 boot sounds, has being mostly twicked using xposed framework!! Things we're today very comfortable in doing ourselves, Not disrespecting anyone by saying that!!
5.using nels83 CM 12.1 unofficial, beta 1 latest version it's the ultimate choice!!
It's lag free, memory and battery friendly, and I had not never suffered any lags like I accounted in this ROM based on 4.4.2!
I know one would argue and say that @nels83's work it's based on cyanogen-mod and unoFficial...that being said he's ROM It's much faster, stable, and based on lollipop 5.1.1!
6.for most of users what matters if how the ROM responds, is it lagging, how's the battery life, how many preinstalled apps it has consuming the RAM, coz I'm gonna need install mine too, and still expect flawless responds from the ROM!
But this ROM ,ELASTIC ROM, has failed this departments mostly!!
7.I believe that if a ROM is put out for testing and claimed to be custom and all it has it's mainly xposed framework modules, then really any of us should start uploading our twicked ROMs for other users to try out!!!
8.with all respect to khalendro and his team, I couldn't use the ROM to even run KODI...I tried this twice, it stopped responding and said app not responding then after few seconds rebooted!#
Same thing happened with restoring my apps with titanium BACKUP, it stopped responding, crashed, rebooted...it seems like heavy duty apps if running,I couldn't use my tablet....
But having said all this things...I believe that most of the xda developers are excellent and having looked at your contributors I was amazed hoping that the ROM will out beat most of the TW based custom KITKATS!!
....................
My purpose of writing this is not to trash anyone or mislead other users keen to try out this ROM, this are my critics based on the experience I got from the little time I attempted to test your hard work mate!!
Maybe it's bad luck, I've reverted back to my nandroid backup coz I was getting frustrated which should not be the case after installing a new ROM, looking forward to your future work mate!!
...................
i hope that my critics if any were helpful in anyways rather then disrespecting your hard work!!
........
This will obviously not be complete if I don't mention all the good things I can't get from CM 12.1!
1.p5200 RILL works perfectly well, voice calls good, but this is not working on my CM 12.1, still under development
2.smart cover worked out of the box with this ROM..., camera also works fine, including screen mirroring/chromecast
3.for some reason Wi-Fi seemed to be stable while updating apps from play store, an issue I have on my current CM 12.1
3.I loved the NOTE 5 icons, but angried by all those millions xposed modules preinstalled!!
4. I'm positive I would have found more if I had more time to use the ROM without random reboots and system not responding messages!!!
5......
@[email protected]
Thanks for the report i'm very happy to see that there is somone using my work and reporting it
as for the rom problems
i guarantee to you that the rom has no problems of FC's and random rebbots
why ?
bacause i have flashed it 5 times before uploading it to xda
i wiped
system
cache
dalvik cache
and data
to Guarantee that there isn't iny space for errors like what you faced
there is also someone have tested the rom and he didn't complain from anything in the rom no lag no FC's and no random reboots and i have asked him just from half an hour
i'm not saying that you lie or somthing of course not
but you know android is full of little mistakes that could make big errors
as for the Rom problems
1 - Much ram
it's based on stock kitkat of samsung and i have deodexed it and removed alot of samsung crap to Guarantee that the Ram consumption is the lowest i have added greenify and busy before uploading it but after testing it i had a random reboots so i didn't want to have problems like this so i removed booth of them
2-as for system ui FC
the only modification that i made it into it that i added the s6 toogles and i'm the one who made the toogles and the one who but it there - however i keept the orignal system.ui in it's place Root/priv.app/system ui .apk.bak
if you want to replace it with the orignal just change the system ui .apk to system ui.apk.1 and remove the .bak from the other one and try it
3-the lag of touchwiz
the main goal of this rom is to be like best touchwiz rom for the tab 3 10.1 so this means that it must be fast and there is nothing called lag
this rom is currently my OS for the tab and i have no problems at all i haven't installed any new thing
4-multiwindow
i have searched for weeks for a solution of the multiwindow for our tab 3 10.1 model but non of them are working there is a dev who tried as hard as he could to make it works for us but it didn't
so the only option i had is to use xposed module
5- as for the alot of xposed modules
every one of them is usefull module
i have installed them in rom to make the user relaxed by not searching for them and installing them i can remove them easily
but i see that i'm as i user i need them
as for the fix of your problems
i see to backup you data with TWRP
then wipe
system
cache
dalvik cahce
and data
then reflash the rom and see if there is any problems
and you can restore data with TWRP i do this alot and not facing any problems with the rom
It's good that you haven't taken my review as an attack...like I did mention I wiped everything including my internal storage x2 but faced lags......
Multi booting will be great if used without xposed ...it's really encouraging to see that someone out there is trying something...
? ? ?
....
Thanks for the tip about the system ui FC
All best with future release!!
Still....
HiOk it may have some bugs and maybe the touchwiz ui is a bit laggy but if im honest i like touchwiz better than cyanogenmod because cyanogenmod is boring and dull and touchwiz looks great. Even though cyanogenmod is faster.
The next version should be better as in less of those bugs you guys are talking about and also support for the wifi version of our tab 3. Great job though dude you really put a lot of effort into this rom and cant wait for the next update of elastic rom. Thanks!!!! Touchwiz is the best!!!!!!!!!!!!!!
Good job thanks for your hard work
Hmmmm....
Hey do you know when the next update will come out. I really want to try it out however i have wifi version (p5210). Do you know when the next version will come out?? I really want to know what day it will come out. Great rom.!!!!
Hello developer s
What was the real problem behind any custom ROM that having no VOLTE option.
In future is there any working solution.
Some one is trying to fix.
What are the obstacles coming in the process of fixing this issue.
How cm14 n so are supporting VOLTE without MIUI nougat base.
Why don't we take MIUI marsallow VOLTE to merge in cm13.
Kindly provide some useful info.
Coz I hate MIUI ROM it's a really laggy and buggy.
UI is very boring.
That's why I am using cm 13 base aicp without working VOLTE.
THANKS
Sorry for my bad English.
orphansmith said:
Hello developer s
What was the real problem behind any custom ROM that having no VOLTE option.
In future is there any working solution.
Some one is trying to fix.
What are the obstacles coming in the process of fixing this issue.
How cm14 n so are supporting VOLTE without MIUI nougat base.
Why don't we take MIUI marsallow VOLTE to merge in cm13.
Kindly provide some useful info.
Coz I hate MIUI ROM it's a really laggy and buggy.
UI is very boring.
That's why I am using cm 13 base aicp without working VOLTE.
THANKS
Sorry for my bad English.
Click to expand...
Click to collapse
This is a sureshot way of getting VoLTE in any Custom ROM.
Try this. It worked for me.
1) Wipe Dalvik Cache, Cache, System, Data. (Not Internal Storage) Flash MIUI Global Beta 6.11.3. Here is the link, http://bigota.d.miui.com/6.11.3/miui_HMNote3ProGlobal_6.11.3_233ef61784_6.0.zip
2) Flash Lazy Flasher to edit the boot.img to prevent bootloops and to disable encryption and dm-verity. Here is the link, https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view
3) Boot to MIUI. VoLTE will work here. Go to Recovery and backip the EFS Partition.
4) Wipe Dalvik Cache, Cache, System, Data. (Not Internal Storage) Now, flash CM 14 Firmware, then RR v5.8.0-20161201 and then GApps. https://www.androidfilehost.com/?fid=385035244224398629
https://www.androidfilehost.com/?fid=385035244224402818
http://opengapps.org/
5) Boot your phone to the RR ROM. In my case, I got the HD sign without restoring the EFS. If you don't get, restore EFS Partition and you're good to go!
Hello There!
Which will be the best rom for Kate?
I used RR Nougat by now.Witch Psyman´s Firmware for VoLTE and the Camera flash zip.
Edit:
Should have said:
I just want a stable rom with good german translation. Less as possible extra Programms. Just enough with little Goole (Nano i have) And not must installed Apps.
Smothely run etc.
And well a good UKW Radio connection.
And pls with SuperSu or Superuser not the new Magic etc.
Additional question:
I didnt restart into normal rom after installing TWRP but internal Storage is correct. So im Ok? Or did i a crucial mistake?
First of all, there is no "best ROM". Everybody feels different about roms!
I would suggest the official LineageOS.
You can flash SuperSU manually. Just be sure you flash the latest zip.
Ok, which SuperSu should i flash=?
In the Lineage OS Thread it is written.
Official weekly builds: https://download.lineageos.org/kenzo (IMPORTANT you read this before proceeding with installation!)
I dont understand that good. https://forum.xda-developers.com/re...neageos-14-t3542491/post70719075#post70719075
Additional: As i wrote i Flashed Psymans Flashlight firmware and VoLTE do i need to flash it again?
MIUI PRO 9.2.1
Ported directly from Redmi Note 4 Mtk
1ST BOOT TAKE ALOT OF TIME ABOUT 15-20MINS. PLEASE TAKE A TEA BREAK WHILE IT BOOTS
CREDITS:
@Aryan raj
@tEaM PC
@chalapathi
@bhuwaneshwaran Vasu
@kuber Sharma
@Irma Nasre
@tEaM WIN
@కె. వేణు
@Uday Hegde
@Rock Roc (For enlightening my urge to port MIUI rom)
@everyone looking forward to use this Rom
@Let me know if i missed anyone
Some of the features :
*Pre-rooted with Magisk
*Fully Deodexed
*Spectrum support
*Google Assistant
*Wallpaper carousel fixed
*Fast charging tweak
*Battery mAh corrected
*Flight mode bug fixed
*Custom boot animation
*Factory text removed from boot screen
*Custom boot screen [Coolpad removed]
*Headphone & audio settings FC fixed
*Low sound fixed
*Face detection unlock
Many more
IMPORTANT NOTE
*Do not update Magisk manager and don't flash any safety net patch.
*Do not update MIUI software.
*If VoLTE doesn't show up don't worry go to Settings>Simcards & mobile network>VoLTE enabled toggle it once. Activate data roaming if you're in roaming network.
*I'll ignore you're comments if:
-quoted the whole OP post
-silly questions and error done from your side
Installation Instructions Read Carefully :
COOLPAD NOTE 3 USERS:
*Boot to any marshmallow recovery
*Wipe Cache, System, Dalvik, Data
*Flash Rom
*Wipe dalvik cache
*Reboot
COOLPAD NOTE 3 LITE USERS:
*Boot to any marshmallow recovery
*Wipe Cache, System, Dalvik, Data
*Flash Rom
*Flash Porting script
*Wipe dalvik cache
*Reboot
Bugs:
*Audio setting headphone click makes settings fc (But ear phone works perfectly)
*Double tap wakeup
Download Links
MIUIPROV9.2.1updated_Akky.zip
PC kernel for Cpn3
Dolby Atmos
Porting script for Lite Users
Youtube
XDA:DevDB Information
MIUI PRO 9.2.1 MT6753, ROM for the CoolPad Note 3
Contributors
akky26
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.x
ROM Firmware Required: Marshmallow Recovery
Based On: MIUIPro Redmi Note 4 MTK
Version Information
Status: Stable
Stable Release Date: 2017-12-30
Created 2017-12-30
Last Updated 2018-01-05
Reserved
Reserved
It works very nicely, thanks. Please see if you can port with naugat or oreo.
Thanks akky26, this one too working well including headset settings.
reboot problem
My mobile reboot automatically at least two or three times a day after flashing this rom. Please suggest solution on this problem.
BBC777 said:
It works very nicely, thanks. Please see if you can port with naugat or oreo.
Click to expand...
Click to collapse
Till now, I have not face any issue on my CPN device except bug which was mention on forum,
but double tab wake option working for my device, either you disable or enable but it's
working.
Are you planning to port this with naugat or oreo?
HARISHFIRKE said:
My mobile reboot automatically at least two or three times a day after flashing this rom. Please suggest solution on this problem.
Click to expand...
Click to collapse
Use Partial wakelock app from gplay store and set its settings to Partial wake.
BBC777 said:
Till now, I have not face any issue on my CPN device except bug which was mention on forum,
but double tab wake option working for my device, either you disable or enable but it's
working.
Are you planning to port this with naugat or oreo?
Click to expand...
Click to collapse
Double tap bug is when you use any other kernel that doesn't supports it, as mentioned in OP d2w bug in PC kernel
Nougat and oreo roms lack VoLTE support that's why not planning to port it now.
Settings not working
I flashed the phone with your ROM. After everything is completed, I am not able to use the Settings in the phone.
I receive this issue.
"Unfortunately, settings has stopped"
Can you help me to fix this issue.
Thanks in advance.
akky26 said:
MIUI PRO 9.2.1
Ported directly from Redmi Note 4 Mtk
Read the installation instructions before flashing
Note if VoLTE doesn't show up don't worry go to Settings>Simcards & mobile network>VoLTE enabled toggle it oonce. Your'e done.
1ST BOOT TAKE ALOT OF TIME ABOUT 15-20MINS. PLEASE TAKE A TEA BREAK WHILE IT BOOTS
CREDITS:
@TEAM PC
@Chalapathi
@Bhuwaneshwaran Vasu
@Kuber Sharma
@Irma Nasre
@TEAM WIN
@కె. వేణు
@Uday Hegde
@Rock Roc (For enlightening my urge to port MIUI rom)
@Everyone looking forward to use this Rom
@Let me know if i missed anyone
No need to flash any safety net patch or magisk on the rom. Don't upgrade the magisk.
Features:
Stable VoLTE
Magisk safety net working stable
Double tap sleep
Notification led fixed
Flight mode bug fixed
Custom animations
Face detection unlock
Dolby can be flashed if you need
PC kernel recommended for better battery backup and fixing incoming call bug
And many more
Installation Instructions Read Carefully :
COOLPAD NOTE 3 USERS:
*Boot to any marshmallow recovery
*Wipe Cache, System, Dalvik, Data
*Flash Rom
*Flash FP patch
*Note 3 users flash pc kernel (to avoid jio reboot bug)
*Wipe dalvik cache
*Reboot
COOLPAD NOTE 3 LITE USERS:
*Flash Porting script
*I dont have Note 3 lite but i guess you don't need to flash other kernel for better performance. Some one pls upload Note 3 lite users instruction after installing it for ease.
The Rom comes with Team zero Kernel to prove rom has double tap wakeup Option, On the other hand it has incoming call restart bug.
For good battery backup use PC kernel
SO I RECOMMEND TO FLASH PC KERNEL.
Bugs:
*Audio setting headphone click makes settings fc (But ear phone works perfectly)
*Double tap wakeup bug in PC kernel
Links:
Rom
https://drive.google.com/open?id=1HNbvLaKHBTLVsalfXASmklIqJgOD6FcT
FP patch
https://drive.google.com/file/d/1lie_oYvd3Z9Bz_5BpBIlot1nXT8TEgs0/view?usp=sharing
PC kernel
https://drive.google.com/file/d/1ewU8hXf0_T4d-__SRn9cMZMwvfbdBeCY/view?usp=sharing
Dolby
https://drive.google.com/file/d/190OZo9prHOpopoFQxR4nSTLVVtTXaLoV/view?usp=sharing
Porting script for Lite Users
https://www.mediafire.com/file/7taro1829cj6mp2/Rom_Porting_Script.zip
Youtube
XDA:DevDB Information
MIUI PRO 9.2.1 MT6753, ROM for the CoolPad Note 3
Contributors
akky26
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.x
ROM Firmware Required: Marshmallow Recovery
Based On: MIUIPro Redmi Note 4 MTK
Version Information
Status: Stable
Stable Release Date: 2017-12-30
Created 2017-12-30
Last Updated 2018-01-05
Click to expand...
Click to collapse
rajesh_kodees said:
I flashed the phone with your ROM. After everything is completed, I am not able to use the Settings in the phone.
I receive this issue.
"Unfortunately, settings has stopped"
Can you help me to fix this issue.
Thanks in advance.
Click to expand...
Click to collapse
Please don't quote the whole OP , kindly give me details which device you have flashed on and what was the previous rom you were using before flashing, just to mention clean flash is always recommended.
Settings not working.
I flashed coolpad note3 which was in
coolui 8,
build no v022,
model number CP8676_I02,
Android version 6.0
Hope this helps.
rajesh_kodees said:
I flashed coolpad note3 which was in
coolui 8,
build no v022,
model number CP8676_I02,
Android version 6.0
Hope this helps.
Click to expand...
Click to collapse
I request you to clean flash the rom. Wipe system, cache, dalvik and data. Just to mention headphones and audio settings option gives fc in old version
Thank you very much for this awesome ROM. Much awaited for a stable VoLTE in MIUI.
One little thing. Google drive is not allowing to download Dolby Atmos. It throws the error "Sorry, this file is infected with a virus
Only the owner is allowed to download infected files." Can you please provide mirror link in some other host sites?
GKarthee said:
Thank you very much for this awesome ROM. Much awaited for a stable VoLTE in MIUI.
One little thing. Google drive is not allowing to download Dolby Atmos. It throws the error "Sorry, this file is infected with a virus
Only the owner is allowed to download infected files." Can you please provide mirror link in some other host sites?
Click to expand...
Click to collapse
Download dolby from magisk modules
Hello with this rom, do we have to flash team-pc-kernel-note 3 too?
BBC777 said:
Hello with this rom, do we have to flash team-pc-kernel-note 3 too?
Click to expand...
Click to collapse
No its optional. The rom comes with zero addition v2 kernel. Flashing Team PC kernel is optional. It is recommended not to flash any other kenel on the rom. Keep zero addition kernel v2 only which comes with rom itself.
Nice
akky26 said:
No its optional. The rom comes with zero addition v2 kernel. Flashing Team PC kernel is optional. It is recommended not to flash any other kenel on the rom. Keep zero addition kernel v2 only which comes with rom itself.
Click to expand...
Click to collapse
Thanks!!!
After Install this rom... Setting foes not open it shows "Unfortunatly Setting has stopped" Any solution for this
Mini 9.2.1for colloid note 3 lite
After installation as per your instructions...
Everything is OK.
But setting does not work
And restarting
Before used custom Rom
1, ambio
2. Alpha
3.miui pro 9. (setting problem occurred )
Tell me how to solve setting issue
DON'T QUOTE THE WHOLE POST !!!
DON'T SPAM OVER THE TOPIC !!!
DON'T ASK FOR ETA !!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
What's working
Everything other than those mentioned in 'Not working list'.
What's not working
Front cmaera doesn't capture. Use OpenCamera or any other Camera APP instead!
Did you find any?
Installation Instructions
Note: if you're comming from any beta releases, please, wipe data otherwise SystemUI will keep crashing!
First Time Install / Clean Flash
0. Disable AVB with fastboot (fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img)
1. Flash PBRP with fastboot (fastboot flash recovery recovery.img)
2. Reboot to Recovery
3. Wipe Data/Cache
4. Flash the ROM (Could need to unmount system before if it's mounted)
5. Format data
7. Flash GAPPs
6. Reboot to System
Update / Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash the ROM
4. Reboot to System
Download
Resurrection Remix 8.6.4 - Stable 3 - ofiicial
PBRP recovery
VBmeta
GAPPs
ROM info
Android version: 10
Resurrection Remix build version: 8.6.4
Android security patch level: November 5, 2020
Vendor security patch level: September 5, 2020
Kernel version: 4.14.141+
Source
Device Tree
Vendor Tree
Prebuilt kernel
Patches
XDA:DevDB Information
Resurrection Remix 8.6.4 for realme 6, ROM for the Realme 6
Contributors
LahKeda, TheMalachite
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: ResurrectionRemix
Version Information
Status: Stable
Current Stable Version: 3
Stable Release Date: 2020-11-21
Current Beta Version: 3
Beta Release Date: 2020-11-11
Created 2020-11-10
Last Updated 2020-11-21
Reserved
Code:
[B]21th of November 2020 - Stable 3[/B]
-We are now OFFICIAL
-Fix battery and recovery selinux denials
[B]16th of November 2020 - Stable 2[/B]
-Switch to user build
-SeLinux is enforcing
-Force enable VoLTE icon
-Added charger animation(Still doesn't want to show up xD)
-Enabled ZRAM(but SAWP doesn't work xD)
[B]14th of November 2020 - Stable 1[/B]
-Reserve 2GB on system partition
-Remove prebuilts GAPPs
-Fixed more SELinux denials
-Fix VoLTE
-Add VoLTE icon
[B]11th of November 2020 - Beta 3[/B]
-Switch to OpenGapps nano variant to save space
-Add maintainer info
-Fixed lots of SELinux denials
[B]10th of November 2020 - Beta 2[/B]
-Fixed ADB debugging
-Switch to userdebug build
-Added OpenGapps stock variant
-Added RR wallpapers (they suck xD)
[B]10th of November 2020 - Beta 1[/B]
-Initial build
Reserved
F.A.Q :
Q - Why you mustn't quote the hole post?
A - As you are killing us dude !
Q - Why mustn't I ask for ETA ?
A - Simply , we are students and colleges so we are busy with our studying and other life problems!
Q - Why mustn't you Spam ?
A -Why should you?
Q - I have faced some issues, which is not mentioned in the 'Not Working' list........?
A - For bug reports, the least we can expect from you is a logcat taken during the issue. Or atleast, you could tell us how and when did you face the bug, how can we reproduce the bug to fix it. Reports without any of these will be ignored.
Q - Can I use your ROM/any part of ROM and modify it and release it separately?
A - Yes you can. But please mention proper credits.
Q - I flashed this ROM, but I dont find any Google App, where can I find it?
A - gapps will be mentioned later in OP but you can get them from any where and flash it !
Bug reporting
How to report a bug?
First off all, check the 'not working' list and see if the bug you are facing is already mentioned or not. If it is, stop right away because the concerned people working on the ROM are aware of the issue.
If the bug/issue is not mentioned in 'not working' list, check the Frequently Asked Question (F.A.Q) and see if issue is resolved already.
If the issue you face is not in FAQ either, you would probably post a reply in this forum, and not PM anyone, about the bug.
Attach a logcat.
If not possible, mention a proper way how you encountered the bug.
Also mention any 3rd party stuff you installed. (Like mods, themes, kernels etc)
Following things WILL NOT be considered as bugs. So please do not post such bug reports, they will be ignored.
Low benchmark scores. Even if Stock results better.
Poor performance in gaming. Even if Stock results better.
High RAM usage/low RAM available.
Various kernel control app crashes.
Crashes of various UI elements when a custom theme/mod is applied.
Random reboots, and other issues caused by flashing custom kernel.
Some people requested a permissive SELinux build so here's it https://sourceforge.net/projects/realme6-rr/files/stable3-unofficial/
But be aware that I will not be maintaining this building and it's not official!!!
Thanx
Can you tell me viper4androd is working or not
In huge fan of v4a so please don't mark it as spam
nasir.da.vinci said:
Thanx
Can you tell me viper4androd is working or not
In huge fan of v4a so please don't mark it as spam
Click to expand...
Click to collapse
Try it and tell me
how can i root this room
magisk is not flshing by recovery
amr kaka said:
how can i root this room
magisk is not flshing by recovery
Click to expand...
Click to collapse
You can patch boot.img with magisk manager and install the boot.img through twrp or fastboot
For detailed instructions visit
Is NikGapps core or Gapps pico possible?
Btw, Thanks Dev for making this beautiful custom rom. Appreciate it so much.
amr kaka said:
how can i root this room
magisk is not flshing by recovery
Click to expand...
Click to collapse
I've reserved 2GB on system partition so you can flash it now
Pardon my lack of knowledge about ZRAM.
I'd like to ask, how much amount of ZRAM has been enabled on Stable 2 build (16 November 2020)?
I have installed stable 2 and found to be great so far.
I'll give full review after a week use here
Help bootloop !!
I installed the rom by wiping data and cache then formated data also
Then I installed the rom
First time it booted successfully then I installed the magisk then real problem started and stuck in bootloop
Now i could not format data
Then I searched xda and followed - checked data (in advance wipe) and clicked repair file system ext2 then ext4 - done
But it again bootlooped
Then again i formated and wiped data and cache and installed the rom again bootloop.
Then I again unlocked bootloader and flashed vbmeta and pbrp booted to recovery and installed rom... again bootloop
Please @LahKeda help me I had not backed up in pbrp recovery
nasir.da.vinci said:
Help bootloop !!
I installed the rom by wiping data and cache then formated data also
Then I installed the rom
First time it booted successfully then I installed the magisk then real problem started and stuck in bootloop
Now i could not format data
Then I searched xda and followed - checked data (in advance wipe) and clicked repair file system ext2 then ext4 - done
But it again bootlooped
Then again i formated and wiped data and cache and installed the rom again bootloop.
Then I again unlocked bootloader and flashed vbmeta and pbrp booted to recovery and installed rom... again bootloop
Please @LahKeda help me I had not backed up in pbrp recovery
Click to expand...
Click to collapse
Magisk doesn't work with RR and messes with the bootimage. You should only have flashed the boot.img again it would work without problems.
Does it reboots to Bootloader or stuck on boot animation? If it's stuck ob boot animation try full wiping the storage
I will flash stock firmware (6gb) tomorrow with realme flash tool
---------- Post added at 09:14 PM ---------- Previous post was at 09:12 PM ----------
LahKeda said:
Magisk doesn't work with RR and messes with the bootimage. You should only have flashed the boot.img again it would work without problems.
Does it reboots to Bootloader or stuck on boot animation? If it's stuck ob boot animation try full wiping the storage
Click to expand...
Click to collapse
It just bootloops every other thing works (fastboot and recovery)
---------- Post added at 09:16 PM ---------- Previous post was at 09:14 PM ----------
I doubt there is some problem in this recovery image
---------- Post added at 09:21 PM ---------- Previous post was at 09:16 PM ----------
I comfortably installed the magisk becouse you confirmed in the last post that magisk can be installed in this rom
@LahKeda Please move the status bar's clock a bit left so that the gap/space between the hole punch camera and the clock isn't too much.
givesandwich said:
@LahKeda Please move the status bar's clock a bit left so that the gap/space between the hole punch camera and the clock isn't too much.
Click to expand...
Click to collapse
Nope
I'm not a ROM developer... maybe you can ask RR team for that!
Help a noob
LahKeda said:
Nope
I'm not a ROM developer... maybe you can ask RR team for that!
Click to expand...
Click to collapse
Can you help a total noob here? How do I root this rom?
Make full review of this rom on YouTube plz
It will help people to get trust of this ROM
anyone know how to go back to stock rom ? i tried flashing using realme flashing tool but it i got an error that says ''cannot find central directories'