Hi. I just purchased the new flex 11 from BB NS-P11A100. It appears to have the exact same processor, chip, and GPU as another tablet I have used before. The Lenovo Tab3 8. The only difference I can see is the emmc size (Lenovo 16Gb & Insignia 32Gb respectively) and the screen sizes. The processor is the same however limited to 1Ghz on the Lenovo whereas I believe the 1.3Ghz is the base CPU speed (I think the European version of the Lenovo came with a 1.3Ghz speed). So out of curiosity would the finished Lenovo's TWRP recovery work on the Insignia? Just a thought. Also, in case of brick could you use the Lenovo's firmware to flash it (after modding the scatter file of course). I'm just a noob to development but have no problem getting my hands dirty (I have 2 Lenovo's both broken but modified heavily) It's good to see another tablet with the 64bit processor setup. Makes it so the 1Gb of RAM don't look so bad. Thanks in advance for any info provided.
i'm guessing this hasn't peaked interest yet? i just got this bad boy root would be awesome
So did any of you who have this tablet figure anything out?
I was walking down the street with my tablet and accidentally stumbled into fastboot. Stay tuned
Fastboot Achieved Need Custom Recovery
IDontKnowMang said:
I was walking down the street with my tablet and accidentally stumbled into fastboot. Stay tuned
Click to expand...
Click to collapse
Ya I was able to unlock the bootloader using the Fastboot Oem Unlock comand. I just havent gotten up the courage to try the twrp recovery I have that I used for my Lenovo. Seeing as i also cannot find a download to get the stock firmware or flash file to fix it if I encounter any bricks... If someone can rewrite the twrp for the lenovo tab3 8 to use the insignia's model number it should work seeing as they both use the same board and chipset. Any ideas from anyone?
Tofor said:
Ya I was able to unlock the bootloader using the Fastboot Oem Unlock comand. I just havent gotten up the courage to try the twrp recovery I have that I used for my Lenovo. Seeing as i also cannot find a download to get the stock firmware or flash file to fix it if I encounter any bricks... If someone can rewrite the twrp for the lenovo tab3 8 to use the insignia's model number it should work seeing as they both use the same board and chipset. Any ideas from anyone?
Click to expand...
Click to collapse
link me up ill give it a shot
Anyone know how to get this thing in download mode? As soon as i get a boot.img i can build us twrp
Any progress on this yet?
any progress, this tablet makes me want to just blow it up. any ideas on rooting it?
Ok. I apologize for not being too active on this... Before when I tried to boot to the twrp recovery that belonged to the Lenovo Tab 4 8 (fastboot boot recovery twrp.img) it would always tell me there was no file by that name. The same thing happened to me when I attempted a different twrp than what was for my new Lenovo Tab 4 10. I found out that the bootloader simply does not allow the ability to boot to twrp. I got balsy and attempted to flash my new Lenovo (fastboot flash recovery tewp.img) instead of trying to boot to it. It worked. However would not boot to recovery but back to fastboot, and when I attempted a regular boot to the OS it replaced the bad twrp with the stock recovery. Tried maybe 5 diff twrp recoveries and it always fixed it. I haven't tried this with the insignia flexx 11 yet and I still have it up and going strong on stock. Maybey it will work and we can have twrp and root on the insignia. BTW. Has anyone seen or found a stock firmware for this device yet? Twrp would be cake it I can get a stock boot and recovery from it.
Alguien puede decirme si es posible hacer algo con las licencias estas?modificarla para root?o solo es una simple info?
Tofor said:
Hi. I just purchased the new flex 11 from BB NS-P11A100. It appears to have the exact same processor, chip, and GPU as another tablet I have used before. The Lenovo Tab3 8. The only difference I can see is the emmc size (Lenovo 16Gb & Insignia 32Gb respectively) and the screen sizes. The processor is the same however limited to 1Ghz on the Lenovo whereas I believe the 1.3Ghz is the base CPU speed (I think the European version of the Lenovo came with a 1.3Ghz speed). So out of curiosity would the finished Lenovo's TWRP recovery work on the Insignia? Just a thought. Also, in case of brick could you use the Lenovo's firmware to flash it (after modding the scatter file of course). I'm just a noob to development but have no problem getting my hands dirty (I have 2 Lenovo's both broken but modified heavily) It's good to see another tablet with the 64bit processor setup. Makes it so the 1Gb of RAM doesn't look so bad. Thanks in advance for any info provided.
Click to expand...
Click to collapse
I have a temporary solution till I find a better way magisk 7.1 and MTK easy root I'm going to assume you have android nugat like mine and it has mtk processor like mine. Anyway you can find both of those downloads here on this site under apps if not let me know
First install mtk easy root then install magisk go back to easy root and install the app or manager what ever it prompts you to do then go to magisk it will prompt you for extra set up then reboot and go to mtk easy root click the boot button on the bottom of the screen after root success go to magisk and set it up poof you have root it takes a minute for mtk to root on its own so I hit the button instead of waiting but it
works till i can really root it
IDontKnowMang said:
Anyone know how to get this thing in download mode? As soon as i get a boot.img i can build us twrp
Click to expand...
Click to collapse
Tofor said:
Fastboot Achieved Need Custom Recovery
Ya I was able to unlock the bootloader using the Fastboot Oem Unlock comand. I just havent gotten up the courage to try the twrp recovery I have that I used for my Lenovo. Seeing as i also cannot find a download to get the stock firmware or flash file to fix it if I encounter any bricks... If someone can rewrite the twrp for the lenovo tab3 8 to use the insignia's model number it should work seeing as they both use the same board and chipset. Any ideas from anyone?
Click to expand...
Click to collapse
If you want to put that thing in download mode it power and volume down then you need a phone handy to translate the Chinese think it's the 3rd one down but I forgot I just use mtk fast root and majisk it works great on mine!
I am looking for a twrp for this tho any suggestions would be awesome!
MT8163__Insignia__NS-P10A8100__mid1023_ma__7.0__alps-mp-n0.mp102-V1.6_hcn8163.tb.wvl1.n_P14
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
I finally found stock firmware
If I insert an SD card, I'm given a dialog box asking to confirm the switch between storage location from internal RAM to SD card, opening up all sorts of access. It gives me a full screen dialog that seems to bypass all of its walled in protections. With a Chrome apk on the SD card I can install it, run it, and download anything.
IDontKnowMang said:
Anyone know how to get this thing in download mode? As soon as i get a boot.img i can build us twrp
Click to expand...
Click to collapse
<Raising my hand> I do. Please see my previous answer.
Power and volume down
Related
Hello!
Idiot’s guide
Most of this is based on discussions with _fun, and borrows heavily from his website http://androtab.info and personal experience. I accept no blame for following my guide, but it should work okay. In other words; DO THIS AT YOUR OWN RISK!
DO NOT USE FWTOOL! YOU WILL BRICK YOUR TOUCH SCREEN!
What you need
Files: http://androtab.info/telechips/firmwares look at the bottom of the page for TCC8803 files.
You must determine if your device has a 4K formatted NAND or an 8K formatted NAND. I’m still fuzzy on how to do this, so it’s probably best to ask. I’ll update this as soon as I get more info! My device is 4K and has a resistive screen. The Kogan Agora is an 8K device.
MicroSD card. You cannot flash the device without a microSD, unless you plan on using FDWN and that’s a tutorial for another day.
Stock Recovery
There are 4 boot options for the EM73, standard boot, recovery boot, FDWN boot, and fastboot. The two important ones (for now) are standard and recovery. Standard boot means you don’t press any buttons while powering up and it just boots up normally.
To get into recovery:
Turn your device off.
Hold the BACK button (big one on the front of the device)
Hold power until the device turns on, then release power button. CONTINUE HOLDING BACK BUTTON
Device will boot into stock recovery, and you can release the BACK button
In stock recovery, you can now flash Clockwork mod, or another stock update should you find one that works. As far as I know, there aren’t any but I’ll update this post if it becomes available.
To navigate stock recovery:
HOME and MENU (the 2 side buttons) move up and down the list
BACK button selects
How to dump stock recovery
download dump-recovery.zip http://androtab.info/files/tcc8902/dump-recovery/dump-recovery-signed.zip
Rename the dump-recover-signed.zip to update.zip
Place the update.zip in the root of your microSD card
Boot into recovery
Choose to install the update from the list
Files will be copied as /sdcard/dumped_recovery.img and /proc/mtd will be copied as /sdcard/dumped_proc_mtd.txt.
How to install ClockworkMod Recovery 4
make backup(dump) stock recovery
download recovery.zip (follow the link at the top of this tutorial to find your files)
Rename recovery.zip to update.zip
Place update.zip on the root of your microSD card
Install update from recovery
Navigation
Navigation is different in ClockWorkMod Recovery then in stock recovery!
BACK button goes back
MENU button moves down the list
HOME button selects
How to get SU on stock ROM
(Info from this thread: http://forum.xda-developers.com/showthread.php?t=682828 There are other methods, but this is how I did it.)
Install ClockworkMod Recovery
Download this file: http://dl.dropbox.com/u/6408470/su-releases/su-2.3.6.1-ef-signed.zip
Place on the root of your microSD card
Boot into recovery
Choose “Install zip from sdcard”
Choose “choose zip from sd card”
Select su-2.3.6.1-ef-signed.zip
Choose Yes
Reboot!
You should now have SU, be sure to download BusyBox from Market or nothing will really work.
How to install CyanogenMod 7
install ClockworkMod Recovery 4
reboot recovery
make backup
wipe data/factory reset *1
install cyanogen.zip (follow the link at the top of this tutorial to find your files)
reboot
touchscreen calibration *1 *2
reboot again to reflect calibration data
*1 only if you are upgrading from non-CM7 ROM (CM7 1st install)
*2 only if you are using resistive touchscreen or misaligned capacitive touchscreen
reserved for future use!
hi,
I checked Gpad702 firmware
http://www.szltp.com/download/download38.html
it's same structure as TCC8902 firmware
I can unpack boot.img/system.img/recovery.img in m801_mtd.img.
kernel ver. is
Code:
Linux version 2.6.35.7-tcc (@build-161) (gcc version 4.4.3 (GCC) ) #183 Wed May 4 17:19:20 HKT 2011
and build id is
Code:
MID73_SIS_HI2M 20110504
it's 2.3.1 ROM and I guess it's same as yours. probably making clockworkmod recovery is not difficult
fun_ said:
hi,
I checked Gpad702 firmware
http://www.szltp.com/download/download38.html
it's same structure as TCC8902 firmware
I can unpack boot.img/system.img/recovery.img in m801_mtd.img.
kernel ver. is
Code:
Linux version 2.6.35.7-tcc (@build-161) (gcc version 4.4.3 (GCC) ) #183 Wed May 4 17:19:20 HKT 2011
and build id is
Code:
MID73_SIS_HI2M 20110504
it's 2.3.1 ROM and I guess it's same as yours. probably making clockworkmod recovery is not difficult
Click to expand...
Click to collapse
I have a feeling this is also the same version as the Kogan Agora Tablet which is based off the Telechip TCC8803 or probably the same thing just rebranded (also the Haipad M708)
i been looking at trying to get root access as well but still fail.
wlee2 said:
I have a feeling this is also the same version as the Kogan Agora Tablet which is based off the Telechip TCC8803 or probably the same thing just rebranded (also the Haipad M708)
i been looking at trying to get root access as well but still fail.
Click to expand...
Click to collapse
I compared Gpad701 2.3.1 ROM and Gpad702 ROM. very similar (of course not compatible, but similar layout). I think I can make clockworkmod recovery and cyanogenmod by changing some lines from cmr/cm for tcc8902.
we can change any files in telechips firmware image. (we are superior than root)
adding su and superuser.apk should be easy. I never use rooting app for telechips tablets
I don't have tcc8803 tablet yet. I can't test at all. it may break your tablet. don't use if you can't accept your tablet may be bricked.
(I think if you can use FWDN you can unbrick easily, but I warned!)
here is test clockworkmod and cyanogenmod files
http://androtab.info/files/tcc8803/cm7/
even if it works(at least boot), do not expect many things. it's just a test image!
EDIT:
I found other possible firmware (I didn't get yet)
http://www.megaupload.com/?d=AD7U83D5
I don't know how many variants are exists. my test image uses files from Gpad702. it may not compatible with your tablet. please use them with care!
EDIT2:
oh, nice, 1st one (em73_SISGC2M_V1_20110516.rar) is 2.3.3 ROM
kernel: Linux version 2.6.35.7-tcc ([email protected]) (gcc version 4.4.3 (GCC) ) #97 Mon May 16 11:53:45 HKT 2011
build: EM73_SIS_GC2M_V1 20110516
oops, 2nd one is same as 1st one 2nd link is removed, sorry.
if you want to flash these files (lk.rom and m801_mtd.img), please see this how to
http://forum.xda-developers.com/showpost.php?p=14237828&postcount=2
it is complete procedure
I'll make test image based on 2.3.3 ROM when I have a time.
EDIT3: http://u.115.com/file/bhd55s6m here is another TCC8803 2.3.3 rom for another hardware(1024x600 screen)
Do we need to get root access first to flash the recovery image?
anyone dare try this with their Kogan Agora tablet lol =P
fun_ said:
I don't have tcc8803 tablet yet. I can't test at all. it may break your tablet. don't use if you can't accept your tablet may be bricked.
(I think if you can use FWDN you can unbrick easily, but I warned!)
here is test clockworkmod and cyanogenmod files
http://androtab.info/files/tcc8803/cm7/
even if it works(at least boot), do not expect many things. it's just a test image!
EDIT:
I found other possible firmware (I didn't get yet)
http://www.megaupload.com/?d=AD7U83D5
http://www.megaupload.com/?d=1AXT9BXT
I don't know how many variants are exists. my test image uses files from Gpad702. it may not compatible with your tablet. please use them with care!
Click to expand...
Click to collapse
wlee2 said:
Do we need to get root access first to flash the recovery image?
anyone dare try this with their Kogan Agora tablet lol =P
Click to expand...
Click to collapse
I added tcc8803-recovery.zip. it should be able to install from stock recovery, and replace recovery with clockworkmod. (hopefully)
anyway, you can use fastboot/FWDN to flash recovery without root.
I'm not sure my files are compatible with your tablet. if your tablet is 2.2.x, you may need to flash lk.rom from 2.3 ROM... see GB ROM entry inFAQ on my tcc8902 thread.
fun_ said:
I added tcc8803-recovery.zip. it should be able to install from stock recovery, and replace recovery with clockworkmod. (hopefully)
anyway, you can use fastboot/FWDN to flash recovery without root.
I'm not sure my files are compatible with your tablet. if your tablet is 2.2.x, you may need to flash lk.rom from 2.3 ROM... see GB ROM entry inFAQ on my tcc8902 thread.
Click to expand...
Click to collapse
Kogan Agora runs android 2.3.3 i havent yet plugged it into the computer to see if i can even get to ADB Shell mm..
i have this FWTool in my menu it says something about updating firmware but i dont know if i should try it.
DO NOT USE FWTOOL TO INSTALL RECOVERY!
TOUCHSCREEN WILL BE DEAD!!!
wlee2 said:
Kogan Agora runs android 2.3.3 i havent yet plugged it into the computer to see if i can even get to ADB Shell mm..
i have this FWTool in my menu it says something about updating firmware but i dont know if i should try it.
Click to expand...
Click to collapse
tcc8803-recovery.zip can be installed without PC.
reboot into stock recovery, then install my zip.
please refer How to/FAQ on my tcc8902 thread.
http://forum.xda-developers.com/showthread.php?t=1101094
wlee2 said:
Kogan Agora runs android 2.3.3 i havent yet plugged it into the computer to see if i can even get to ADB Shell mm..
i have this FWTool in my menu it says something about updating firmware but i dont know if i should try it.
Click to expand...
Click to collapse
i can get adb shell and root on kogan agora using the telechip8803 root recovery
and installed gtalk from 2.3.4
been running fine for a few days, but today it just lost any internet connection
still get ip, still can ping to outside address but no app working, market, browser talk etc
seen a lot of [0]: tcc_setup_interrupt timed_out!! in kernel message
since im not that savvy in figuring out whats the problem, i just did a factory reset and internet connection is back
i'll try cyanogen next when i have time
if anyone need the kernel message log (rooted and after factory reset), let me know
Can please post step by step guide for root access on kogaan or link to how
Sent from my EM73_SIS_GC2M_V2 using XDA App
kunnlan said:
i'll try cyanogen next when i have time
Click to expand...
Click to collapse
if you can, please try to install recovery.zip from *stock recovery*. it should work, and if it works, it's easy way to install clockworkmod.
cyanogenmod is just for someone who really like cm. not for daily use, e.g. hw codecs don't work
kunnlan said:
i can get adb shell and root on kogan agora using the telechip8803 root recovery
and installed gtalk from 2.3.4
been running fine for a few days, but today it just lost any internet connection
still get ip, still can ping to outside address but no app working, market, browser talk etc
seen a lot of [0]: tcc_setup_interrupt timed_out!! in kernel message
since im not that savvy in figuring out whats the problem, i just did a factory reset and internet connection is back
i'll try cyanogen next when i have time
if anyone need the kernel message log (rooted and after factory reset), let me know
Click to expand...
Click to collapse
I'm keen to know what you thought of your Kogan tablet - I have one on the way but was a bit dismayed to see the cr*p reviews so far
Looking forward to getting a custom ROM on it!!
Have any of you had any issues with the browser closing when loading google.com only? Also I've had an issue with trying to get a location through wifi with this tablet. I've tried enabling wireless networks and so and still nothing. I think it might be a faulty firmware.
Jrockz said:
Have any of you had any issues with the browser closing when loading google.com only? Also I've had an issue with trying to get a location through wifi with this tablet. I've tried enabling wireless networks and so and still nothing. I think it might be a faulty firmware.
Click to expand...
Click to collapse
Sorry for kinda hijacking. Just saw this was the only thread in the forums concerning this device.
Thanks in advance
wlee2 said:
Can please post step by step guide for root access on kogaan or link to how
Sent from my EM73_SIS_GC2M_V2 using XDA App
Click to expand...
Click to collapse
sure
1. get this file :Telepad7C_M708_Telechip8803_Root_Recovery
search for it, i can't post any url yet (need at least 8 post)
2. install the motorola driver
3. there's a how to in the file, but i didn't follow it
instead i just do adb remount, shell and copy the new su and then install superuser from market. done.
fun_ said:
if you can, please try to install recovery.zip from *stock recovery*. it should work, and if it works, it's easy way to install clockworkmod.
cyanogenmod is just for someone who really like cm. not for daily use, e.g. hw codecs don't work
Click to expand...
Click to collapse
will do .. ill post how it goes
dwl99 said:
I'm keen to know what you thought of your Kogan tablet - I have one on the way but was a bit dismayed to see the cr*p reviews so far
Looking forward to getting a custom ROM on it!!
Click to expand...
Click to collapse
the hardware it self is what you get for the price
it's decent enough to use for browsing, reading and media player, even gaming if you like
the battery is bad, standby of ~8h and ~3-4h for continuous usage
the screen is dark and have limited view angle, but bear in mind it's not samsung galaxy's amoled :lol:
it's good for daily use and if you dont expect much for the money you spend
it's bad because kogan tells a lot of crap! if you follow the story from their first ad you will know what i mean
kunnlan said:
sure
1. get this file :Telepad7C_M708_Telechip8803_Root_Recovery
search for it, i can't post any url yet (need at least 8 post)
2. install the motorola driver
3. there's a how to in the file, but i didn't follow it
instead i just do adb remount, shell and copy the new su and then install superuser from market. done.
will do .. ill post how it goes
the hardware it self is what you get for the price
it's decent enough to use for browsing, reading and media player, even gaming if you like
the battery is bad, standby of ~8h and ~3-4h for continuous usage
the screen is dark and have limited view angle, but bear in mind it's not samsung galaxy's amoled :lol:
it's good for daily use and if you dont expect much for the money you spend
it's bad because kogan tells a lot of crap! if you follow the story from their first ad you will know what i mean
Click to expand...
Click to collapse
mm was not quite the step by step i wanted more so interested where to download those files quick get your 8 post =P
i agree mostly with what you said Re Kogan tablet battery life is bad it wont survive a full day at work with constant use.
i dont mine the screen all so much it runs angry birds quite well i personally see the view angle thing as a Plus since most people put up privacy screens to stop people from looking in on what we are doing the kogan one does it straight out of the box lOL..
i got the first batch from kogan was a lOng wait but i am glad it was upgraded a bit after the Wait i still think if you bought 2 or 3 of them in one shipping and 3 friends needing it at the cheapest live price at $139 its worth it for a sub 200 tablet
for your 120 bucks more you can try to find a samsung galaxy tab in aus but its pretty hard find now i managed to get hold of one ..
fun_ said:
tcc8803-recovery.zip can be installed without PC.
if you can select zip file from FWTool in menu, please try it. otherwise, reboot into stock recovery, then install my zip.
please refer How to/FAQ on my tcc8902 thread.
http://forum.xda-developers.com/showthread.php?t=1101094
Click to expand...
Click to collapse
hey Fun
is this the Link for the flash file using the FWTool from the tablet?
http://androtab.info/files/tcc8803/cm7/recovery.img
or do i need a zip file?
next question how do i get into recovery mode on the desire its power and vol down but theres no vol down on the kogan heh.,.
wlee2 said:
mm was not quite the step by step i wanted more so interested where to download those files quick get your 8 post =P
Click to expand...
Click to collapse
lol
www dot mp4nation dot net/forum/viewtopic.php?f=77&t=22007
download the megaupload one, there's a simple instructions.txt in that file
I exhausted everything by this point so im relying on this forum.
If anyone knows a way to install custom recovery on this phone or just some info in general would be appreciated..
Here's more detailed specs:
LG K8 (K350n)
SoC MediaTek MT6735
CPU Quad-core 1.3 GHz Cortex-A53
GPU Mali-T720
1.5GB Ram
Android 6.0
Help me xda , you're my only hope
Laitas said:
I exhausted everything by this point so im relying on this forum.
If anyone knows a way to install custom recovery on this phone or just some info in general would be appreciated..
Here's more detailed specs:
LG K8 (K350n)
SoC MediaTek MT6735
CPU Quad-core 1.3 GHz Cortex-A53
GPU Mali-T720
1.5GB Ram
Android 6.0
Help me xda , you're my only hope
Click to expand...
Click to collapse
I don't have a solution for you, but I can tell you what I've tried (I have the K350N also) and what doesn't work, for me anyway, so that you don't have to waste a week trying them yourself and get extremely frustrated like I did.
You need a scatter file, so that tools for MTK chips can copy your phone's boot and recovery images. One for the MT6735 exists but is not for the K8 and won't work. Supposedly you can create your own by using block info given by MTK Droid Tools, and manually editing the scatter file, but even the latest version (2.5.3d) does not support the MT6735 and does not give the info needed.
SP Flash Tool needs correct address info (which is gotten from a scatter file), it doesn't seem to take it from your phone. Without it, you'd not be able to pull the correct parts which make up your boot.img and recovery.img, so it's useless without the exact scatter file for your phone (whether it's the same SoC or not).
If you can get Miracle Box to stay connected to your phone, you can try its "Read" function. That didn't work for me, even after dozens and dozens of tries and messing about with different drivers.
Your best bet is probably to try using ADB to get the block/address/size info of the internal partitions, and editing that into a scatter file. Also, apparently the K8 uses a "standard Android" header, not MTK header like older MediaTek chipsets do. (Not quite sure what it means, but knowing so will probably be useful).
That's what I plan to try anyways, and if I manage to do it, I'll post again.
Aerieana said:
I don't have a solution for you, but I can tell you what I've tried (I have the K350N also) and what doesn't work, for me anyway, so that you don't have to waste a week trying them yourself and get extremely frustrated like I did.
You need a scatter file, so that tools for MTK chips can copy your phone's boot and recovery images. One for the MT6735 exists but is not for the K8 and won't work. Supposedly you can create your own by using block info given by MTK Droid Tools, and manually editing the scatter file, but even the latest version (2.5.3d) does not support the MT6735 and does not give the info needed.
SP Flash Tool needs correct address info (which is gotten from a scatter file), it doesn't seem to take it from your phone. Without it, you'd not be able to pull the correct parts which make up your boot.img and recovery.img, so it's useless without the exact scatter file for your phone (whether it's the same SoC or not).
If you can get Miracle Box to stay connected to your phone, you can try its "Read" function. That didn't work for me, even after dozens and dozens of tries and messing about with different drivers.
Your best bet is probably to try using ADB to get the block/address/size info of the internal partitions, and editing that into a scatter file. Also, apparently the K8 uses a "standard Android" header, not MTK header like older MediaTek chipsets do. (Not quite sure what it means, but knowing so will probably be useful).
That's what I plan to try anyways, and if I manage to do it, I'll post again.
Click to expand...
Click to collapse
Well i spend best part of this morning trying to a different aproach , i managed to find a ROM file (in kdz format, whitch woulve been useless for mtk tools anyway) whitch i extracted for a Recovery.img and tried to port the various recovieries with no awail for now. From what i've seen the filesystem inside the rom is a mess some of the files have the MTK headers others have the android ones and I'm trying to make this work entirely by trial and error.. If I'll manage to boot into the recovery I'll let you know. Wish me luck
Ok I managed to make a port from K10 that actually boots to recovery. I'll post updates as I work on it (all trial and error~)
Maybe you will get more luck than me. SuperSu fails to install somethign about failing to decompress ramdisk
Here is the Recovery : https://www.mediafire.com/?xopqenbvgrswgxm
I booted into it using fastboot boot xxx.img command from adb
As I am complete noob when it comes to android modding I'm surprised what I achieved thus far
Laitas said:
Maybe you will get more luck than me. SuperSu fails to install somethign about failing to decompress ramdisk
Here is the Recovery : https://www.mediafire.com/?xopqenbvgrswgxm
I booted into it using fastboot boot xxx.img command from adb
As I am complete noob when it comes to android modding I'm surprised what I achieved thus far
Click to expand...
Click to collapse
what K8 do you have? MTK or Qualcomm Version?
Laitas said:
Maybe you will get more luck than me. SuperSu fails to install somethign about failing to decompress ramdisk
Here is the Recovery :
I booted into it using fastboot boot xxx.img command from adb
As I am complete noob when it comes to android modding I'm surprised what I achieved thus far
Click to expand...
Click to collapse
how you extract the recovery img from the kdz? thanks.
tomi.gutierrez.i said:
how you extract the recovery img from the kdz? thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2600575
Was using this . At this point only thing left is to wait for SuperSU update as it doesnt work on K8 yet
Laitas said:
http://forum.xda-developers.com/showthread.php?t=2600575
Was using this . At this point only thing left is to wait for SuperSU update as it doesnt work on K8 yet
Click to expand...
Click to collapse
i flash the image you give, and it cant mount system, so it cant flash supersu, the lg k10 have the same problem that this recovery (it might be for the port), so we have to wait a super su version for lg k10 and k8 and a functional TWRP
Laitas said:
Maybe you will get more luck than me. SuperSu fails to install somethign about failing to decompress ramdisk
Here is the Recovery : LINK
I booted into it using fastboot boot xxx.img command from adb
As I am complete noob when it comes to android modding I'm surprised what I achieved thus far
Click to expand...
Click to collapse
Can you please show me how to install this recovery on my LG K8 (K350z)
and did you have any luck rooting this phone
all i want is Xposed installed and working but apparently i need root and recovery to install it
Yasser Da Silva said:
Can you please show me how to install this recovery on my LG K8 (K350z)
and did you have any luck rooting this phone
all i want is Xposed installed and working but apparently i need root and recovery to install it
Click to expand...
Click to collapse
I need the same thing like you :c
I dont know how to root my LG K8 in order to install Xposed
Have u found a way to root a lg k8
Maveroik said:
I need the same thing like you :c
I dont know how to root my LG K8 in order to install Xposed
Click to expand...
Click to collapse
Have u found a way to root a lg k8
Declan nalced said:
Have u found a way to root a lg k8
Click to expand...
Click to collapse
Nope man :'c
Laitas said:
Maybe you will get more luck than me. SuperSu fails to install somethign about failing to decompress ramdisk
Here is the Recovery : xxxxxxxxxxxxxxxx
I booted into it using fastboot boot xxx.img command from adb
As I am complete noob when it comes to android modding I'm surprised what I achieved thus far
Click to expand...
Click to collapse
did u managed to unlock your bootloader? From the strategy of rooting HTC, LG also need a bootloader unlock before you having some privilege in flashing recovery... or rooting...
hackwilliam said:
did u managed to unlock your bootloader? From the strategy of rooting HTC, LG also need a bootloader unlock before you having some privilege in flashing recovery... or rooting...
Click to expand...
Click to collapse
That was step 1 you have to go to fastboot form adb and unlock it from there
I've got the k8 us375 model today and its running 6.0 with an update waiting to install. I'm sure it won't matter much but I'm going to avoid updating anytime soon.
With little research into the device I'm reading people trying kingroot and getting stuck with a semi brick and error. From what I've read about marshmallow is the root needs to be accepted from the boot.img which also needs to be insecure.
So unlocking the bootloader is first.
Second is modifying the kernel and
Then recovery needs to be made so that superSu can be flashed.
I'm no expert but neither am i a newbie to this process, however I'm a little rusty. If anyone knows a better way to describe the processes needed please enlighten me. I'll be away from my PC till this weekend but have a laptop i can tinker with tonight. Until i completely understand what needs to be done I'll continue to do research. Thanks
Sent from my LGUS375 using Tapatalk
justlovejoy said:
If anyone knows a better way to describe the processes needed please enlighten me.
Sent from my LGUS375 using Tapatalk
Click to expand...
Click to collapse
I've been trying to root my k8 (k350n) - european version the last few weeks... so far i got:
(here i try to post a url i can't yet... you can find my topic on chinaphonearena - i describe everything there - search "lg k8 k350n twrp" on google - it will be the second result)
the twrp boots but i'm afraid it's not a perfect port so it migth not handling the partitions well... i mean when i try to install supersu i think it cannot find the boot.img (it seems to find but can't patch it).
The newest supersu supposed to patch the boot.img automatically so i believe the only thing we should manage to get a working twrp...
if you want to try i have to warn you that sometimes when i mess with the twrp i have to make a hard reset the get my phone working again. When you boot to the twrp it asks if you want to make your system writeable - you don't have to do that in order to install supersu - however if you allow twrp to make your system writeable you might lose data (i only lost data if i did a format in the twrp but only writeability doesnt clear data in my case...)
edit1:
so i found that supersu can only patch boot images compress by "gzip". The boot im. of our k8 is compress using "lz4" method. I also realized that my twrp works so far as the supersu tries to decompress the boot image... so
We either wait till supersu deals with lz4 or if we could somehow take (dump to pc) the boot image in fastboot "re"compress to gzip - flash back to the device - restart twrp (not boot to android yet - which obviously would not work), install supersu - restart to fastboot take the boot image "re"compress to lz4 and flash the patched boot.img back to the device.
well it's just an idea which actually stucks at dumping the image without root and who knows what other reasons...
or if we knew what tweaks needs to be done to the boot image and we could just make it on pc and flash it in fastboot (i have the stock boot image - i have the whole firmware actually)...
Any advice would be appriciated
Here we go guys...
http://forum.xda-developers.com/lg-k10/how-to/twrp-root-lg-k8-k350n-t3475807
I actually had to return it. It was brand new in the box but the imei was linked to a delinquent account and I couldnt activate it. I'm subscribed if anything.
So I recently bought myself a Nextbook Ares 11A (you can get look at it here: http://www.nextbookusa.com/productdetail.php?product_id=33
For the life of me, I can't figure out how to root it at all. Anyone have an idea how to root it. I have tried King and Kingo root, both PC versions. Vroot/iroot, framaroot apk, and some others that i kinda forgot.
One of the first things I did to this tablet was upgrading its android version to 6.0.1
I think one of the main exploits to use for this would be the firmware update
-quick note. If your having problems with this tablet rebooting by itself re download the android 6.0.1 firmware update and install it again.
Firmware update download: https://goo.gl/Cev80L
Same here. Can't root it. Awesome tablet for the price just $197 for a 11 inch tablet running Android 6.0.1 Marshmallow. Here are my specs. Hope e can find a root soon. Boring without root access. No cool apps without have root.
Netbook Ares 11A
Model# NX1611264
Running Android ver. 6.0.1 Marshmallow
Security patch level 2015-11-01
IFWI ver.
Build # V1-1.9.LMY47I.20160803.154546
Kernel-3.14.37-X86_64-L1-R517
I am so glad some of the community is interested in this.
can you post a copy of the update? ive been having a hard time gettin the update.zip to fully dl
mrspinler said:
can you post a copy of the update? ive been having a hard time gettin the update.zip to fully dl
Click to expand...
Click to collapse
no problem. ill do that when i get home from school today
GRIMMMMS said:
no problem. ill do that when i get home from school today
Click to expand...
Click to collapse
ty
also any luck actually rooting this tablet? ive tried but the device isnt recognized by the fastboot drivers.
however adb recognizes it when it is actually turned on normally wich is weird.
mrspinler said:
ty
also any luck actually rooting this tablet? ive tried but the device isnt recognized by the fastboot drivers.
however adb recognizes it when it is actually turned on normally wich is weird.
Click to expand...
Click to collapse
No I really havent had any luck wth any pc rooting software's or apk viersons. I tryed all the ones I trust. And i dont really know how to root a divise other than using the software.
mrspinler said:
ty
also any luck actually rooting this tablet? ive tried but the device isnt recognized by the fastboot drivers.
however adb recognizes it when it is actually turned on normally wich is weird.
Click to expand...
Click to collapse
here you go. the dl :https://goo.gl/Cev80L its from google drive
i installed the update and my tablet doesnt make it all the way through and is stuck on logo screen its the same model as op ..looks like i cant go back in firmware cause the older firmware says bad footer
nextbook ares 11 a
After installing the correct adb/fastboot drivers along with the intel chip usb drivers, i was able to unlock/flash boot.img and bootloader. All i need now is a working twrp_recovery image to finish rooting this tablet and remove encryption. If anyone has a working twrp recovery or knows how to make one based off the rom, then please post it. I would love to have this tablet rooted and non encrypted.
11a
i have the same tablet is there anyway you could send a copy of firmware or the stock recovery @mrspinler
look-up vampiro's work on the ares 8, he has made a twrp that will work, with a mouse connected to the ares 11, the are a few modified roms for the ares 8, including a remix os, that works great, except for touchscreen doesn't work, but touchpad, and attaching a mouse works great
nextbook ares 11 a
tim121283 said:
i have the same tablet is there anyway you could send a copy of firmware or the stock recovery @mrspinler
Click to expand...
Click to collapse
tim i am sorry but i am unable to give a stock recovery seeing as i tried to flash other recovery images. however i would be glad t post the update file but i can't post links yet. The update file is in the very first post, and you have to unzip it onto the sd card to get the tablet to notice it.
If you are familiar with rooting android then perhaps you could provide the stock recovery image so that someone with more programming knowledge can actually make a cwm or twrp recovery from it. The boot.img file is correct as well, which happens to be inside the update file. I know this because i almost bricked my tablet XD.
---------- Post added at 03:14 AM ---------- Previous post was at 03:09 AM ----------
thew-tab said:
look-up vampiro's work on the ares 8, he has made a twrp that will work, with a mouse connected to the ares 11, the are a few modified roms for the ares 8, including a remix os, that works great, except for touchscreen doesn't work, but touchpad, and attaching a mouse works great
Click to expand...
Click to collapse
Have you been able to root this tablet with the ares 8 files? If so then how did you get the recovery.img to work and what about the encryption files? I ask because the ares 8 has the same cpu but it is android 6.0.1 rom versus android 5.0/5.1.
11a
heres the deal i downloaded the update on the first page and always got stuck at like 35 percent tried to flash the recovery from the 11rootkit it didnt work tried from the ares 8 and just get an error screen ive got the tablet unlocked fully and can flash anything in fastboot but no file at all with bring it back ive tried the firmware files and there not in the right format for fastboot the tablet is bricked but can still get into fastboot but no working recovery
mrspinler said:
After installing the correct adb/fastboot drivers along with the intel chip usb drivers, i was able to unlock/flash boot.img and bootloader. All i need now is a working twrp_recovery image to finish rooting this tablet and remove encryption. If anyone has a working twrp recovery or knows how to make one based off the rom, then please post it. I would love to have this tablet rooted and non encrypted.
Click to expand...
Click to collapse
i have no idea
if you ever get it done please come back and help us get ares rooted XD
If anyone can manage getting a copy of recovery.img off your tablet, please post it. I will try and make a twrp img with it. Hopefully a dev can pick this up cause I am sort of out of my league atm.
I'm very interested in this endeavor. I have a Ares 11A as well but I'm in desperate need of a stock ROM as mine got trashed by the Marshmallow update. As a result I had to install Win 10 on the device temporarily, but i would like to get it back to the original stock ROM and try again. If that fails, then I'm going to have to build an entirely new ROM (never done this before) based on Android-x86 Marshmallow.
What's really sad is that support for this device is sorely lacking from the vendor(Efun/Yifang). They don't even post a stock ROM on their website (nextbookusa.com) for this device. However, this device is similar to some of the Chinese tablets posted on techtablets.com so I MAY be able to find a stock ROM / drivers there.
baharvey7817 said:
I'm very interested in this endeavor. I have a Ares 11A as well but I'm in desperate need of a stock ROM as mine got trashed by the Marshmallow update. As a result I had to install Win 10 on the device temporarily, but i would like to get it back to the original stock ROM and try again. If that fails, then I'm going to have to build an entirely new ROM (never done this before) based on Android-x86 Marshmallow.
What's really sad is that support for this device is sorely lacking from the vendor(Efun/Yifang). They don't even post a stock ROM on their website (nextbookusa.com) for this device. However, this device is similar to some of the Chinese tablets posted on techtablets.com so I MAY be able to find a stock ROM / drivers there.
Click to expand...
Click to collapse
I'm in the exact same situation how did you get windows to boot?
tim121283 said:
I'm in the exact same situation how did you get windows to boot?
Click to expand...
Click to collapse
Basically, I deleted the Android partitions and reallocated the space a a Windows partition. I got into the device UEFI boot manager by pressing the power + Vol down buttons, then releasing the power button when the Nextbook logo appears, then release the Vol down button. It's a little tricky to get into it but it can be done. Before you attempt to do so you have to get the device into fastboot mode (power+vol up buttons) and unlock the bootloader first. Be advised though that finding Windows 10 drivers will be VERY difficult! It's not for the faint of heart! I went to the techtablets.com website to find the drivers as they specialize in supporting Chinese-made tablets.
As I've stated earlier this is a temp solution. When all is said and done, this will become a dual-boot or multi-boot tablet
this is the only thing i can find but cant get it right http://www.nextbookusa.com/_gendownloads/NX16A11264/update.zip
I suspect i have foolishly tried to root my Alcatel A2 xl, as I''ve never done it before and it looks unconventional, and it's now stuck in boot loop. I can hold volume up and power and get to select boot mode, but recovery freezes the screen and selecting normal triggers the boot loop. Fastboot works still.
It was all working fine, I'd set up adb and a couple drivers, then followed some guide here to install Clockwork Recovery by flashing it via adb. I did that, and can't do anything sense - i read somewhere else i should have wiped data first, could this have been it?
Any help on how to recover enormously appreciated. At this point i've tried the official Alcatel tool to reset a stock rom and it can't detect the phone correctly, and that's it. I dont want to go trying to flash another recovery or custom ROM on yet as im uncertain what went wrong.
Also just want to say thanks in advance, and thanks for the whole site, it's the only reliable looking place i could find for android advice , i mean im sure you know that.
Try this
Lewisly said:
I suspect i have foolishly tried to root my Alcatel A2 xl, as I''ve never done it before and it looks unconventional, and it's now stuck in boot loop. I can hold volume up and power and get to select boot mode, but recovery freezes the screen and selecting normal triggers the boot loop. Fastboot works still.
It was all working fine, I'd set up adb and a couple drivers, then followed some guide here to install Clockwork Recovery by flashing it via adb. I did that, and can't do anything sense - i read somewhere else i should have wiped data first, could this have been it?
Any help on how to recover enormously appreciated. At this point i've tried the official Alcatel tool to reset a stock rom and it can't detect the phone correctly, and that's it. I dont want to go trying to flash another recovery or custom ROM on yet as im uncertain what went wrong.
Also just want to say thanks in advance, and thanks for the whole site, it's the only reliable looking place i could find for android advice , i mean im sure you know that.
Click to expand...
Click to collapse
Hi there,
I am not sure if this will work or not as ALCATEL is famous for making cheap smartphones however the number of ROMS out there are slim, I was wondering do you have the stock rom with you and are you able to connect your phone to your computer and can ADB detect it.
If your still able to boot into recovery you can uninstall root by wiping its memory completely.
And if your phone is able to get recognised by ADB I suggest you to reinstall the whole ROM
I have found a website which might help you to get the ROM
https://www.needrom.com/category/alcatel/
Hey thanks thanks. I can't boot into recovery frustratingly, but it can be recognised by adb.
I dont have a stock rom though so thanks for website - can you point me to the right ROM? There doesn't seem to be anything specific to the A2 XL model, but it has a MT8321 processor so does that mean any ROM for that would work? NEEDROM /tablet_captiva_pad_10_3g_plus_mt8321/
or the A2 XL also seems to have exactly the same processor as the Pixi 4, and both come with the 8050D tag-on which i have no idea what means. So would that be a better shout? NEEDROM /rom-stock-pixi-4-7-alcatel-9003a-telcel/
Lewisly said:
Hey thanks thanks. I can't boot into recovery frustratingly, but it can be recognised by adb.
I dont have a stock rom though so thanks for website - can you point me to the right ROM? There doesn't seem to be anything specific to the A2 XL model, but it has a MT8321 processor so does that mean any ROM for that would work? NEEDROM /tablet_captiva_pad_10_3g_plus_mt8321/
or the A2 XL also seems to have exactly the same processor as the Pixi 4, and both come with the 8050D tag-on which i have no idea what means. So would that be a better shout? NEEDROM /rom-stock-pixi-4-7-alcatel-9003a-telcel/
Click to expand...
Click to collapse
Hi there,
sorry i was wrong, i didn't knew you were using an mtk processor
since its mtk you need to use sp flash tool
and it doesnt have the same processor as i searched the tag "8050D" it came up as a Snapdragon processor
However you can download SP-FLASH TOOL and look up the another alcatel phone matching the same description
KIBS2173 said:
Hi there,
sorry i was wrong, i didn't knew you were using an mtk processor
since its mtk you need to use sp flash tool
and it doesnt have the same processor as i searched the tag "8050D" it came up as a Snapdragon processor
However you can download SP-FLASH TOOL and look up the another alcatel phone matching the same description
Click to expand...
Click to collapse
Okay right i read all abot the SP FLASH TOOL but was unable to generate a scatter so 'd tried other options. There's a dl for a scatter for the Pixi 8050D which has the same MTK8321 processor so im going to try the tool with that and hope. Thanks for advice man
Lewisly said:
Okay right i read all abot the SP FLASH TOOL but was unable to generate a scatter so 'd tried other options. There's a dl for a scatter for the Pixi 8050D which has the same MTK8321 processor so im going to try the tool with that and hope. Thanks for advice man
Click to expand...
Click to collapse
Yeah sure no problems
Looking to start a discussion on rooting the unlocked version.
I have tried the root for other variants for this phone and does not work
hi would love to see my k8+ rooted. i have the lmx210ulma version mtk and android 7.1.2.
There are recoveries for this phone and i have a full partition dump i nade today using salt on my ubuntu 18.04 machine. when i say full i mean something like 30-50 .img files pulled.
Any way. The problem on my end is booting into fastboot mode or rebooting to the bootloader. i have tried ADB, recovery and key combinations with out ever getting there. I can however get the phone to download into recovery download mode just fine.
any help would be appreciated
https://forum.xda-developers.com/an...atek-armv8-t3922213/post79626434#post79626434
Duhjoker said:
hi would love to see my k8+ rooted. i have the lmx210ulma version mtk and android 7.1.2.
There are recoveries for this phone and i have a full partition dump i nade today using salt on my ubuntu 18.04 machine. when i say full i mean something like 30-50 .img files pulled.
Any way. The problem on my end is booting into fastboot mode or rebooting to the bootloader. i have tried ADB, recovery and key combinations with out ever getting there. I can however get the phone to download into recovery download mode just fine.
any help would be appreciated
Click to expand...
Click to collapse
We are now in this forum. Why some dork mod moves these too early?
Why here, why not to the K8 forums instead?
The link I posted should work with your device...
Just got told to go to the k8 forums because im really just trying to get the bootloader unlocked. Temp root is nice but my plans involve a recovery and a fully rooted phone. Im trhing to develop a way to compile apps and operating systems completely on the device but i need full access.
Im looking for firmware for LG K8 2018 X210ULMG. Where can i find it ?
go to google and type in "LG K8 + LMX210ULM stock rom" you will get at least five pages or more.
Duhjoker said:
go to google and type in "LG K8 + LMX210ULM stock rom" you will get at least five pages or more.
Click to expand...
Click to collapse
I can't fin anywhere for X210ULMG. Try and when you will find paste here link because anywhere is this rom.
which android version do y0u have 9n your k8. I also need you to go to settings system software info and tell me the software versiion. And just for SandG no seriously, open up a terminal in terminal emulator and type getprop. im looking fir the value of
ro.lge.swversion_arb
to be of further assistance may i ask what exactly you are using it for? ie reflash stock fix brick or other. i can help you with the best plan of action and any other how to.
If you are still out there the ULMG and ULM are the same device. There is no ULMG stock rom. So you will need to flash your K8+ using the ULM firmware. If you are looking to roll back to get to the bootloader the lowest version you can find is a letter F version. None so far have an ARB value so happy flashing.
I myself own this device and its an easily rootable phone with bootloader unlock. Just flash the kdz with the lowest letter value then adb reboot bootloader and then in fastboot mode use fastboot oem unlock and your free to flash any cv1 device twrp recovery.img to the phone.
Just make sure to use either carliv image kitchen or android image studio to check and make sure that system, syatem.img, are both ext4 in recovery.fstab. System.img will probably be labled emmc which will cause failure to mount. Also cache and data as well. Firmware/modem should be labled as vfat. Just as if they were labled if you looked at original fstab.
To root just extract boot.img from kdz and patch using magisk and flash using fastboot flash boot boit.img then fastboot flash recovery recovery.img When booting into twrp first time flash no verity opt encrypt and make backup. Upon exiting make sure all parts are mounted or twrp loop will occur.
Duhjoker said:
If you are still out there the ULMG and ULM are the same device. There is no ULMG stock rom. So you will need to flash your K8+ using the ULM firmware. If you are looking to roll back to get to the bootloader the lowest version you can find is a letter F version. None so far have an ARB value so happy flashing.
I myself own this device and its an easily rootable phone with bootloader unlock. Just flash the kdz with the lowest letter value then adb reboot bootloader and then in fastboot mode use fastboot oem unlock and your free to flash any cv1 device twrp recovery.img to the phone.
Just make sure to use either carliv image kitchen or android image studio to check and make sure that system, syatem.img, are both ext4 in recovery.fstab. System.img will probably be labled emmc which will cause failure to mount. Also cache and data as well. Firmware/modem should be labled as vfat. Just as if they were labled if you looked at original fstab.
To root just extract boot.img from kdz and patch using magisk and flash using fastboot flash boot boit.img then fastboot flash recovery recovery.img When booting into twrp first time flash no verity opt encrypt and make backup. Upon exiting make sure all parts are mounted or twrp loop will occur.
Click to expand...
Click to collapse
I have problem because one month ago I flashed My K8 ULMG with kdz for Aristo 2 . I downloaded the software from Aristo 2 and made Brick through it.
Now it doesn't turn on, gives no sign of life, nothing. When connected to a laptop, the computer can only see Qualcomm HS-USB QDLoader 9008.
Do you know solution for it ?
There are two versions of the k8+ a qualcomm version and an mtk version. Did you read my post after your last reply. I was trying to help you determine that sort 0f thing.
As for a fix.... no as of currently there is no fix for either the qc or mtk versions once bricked. i am working on possible solutions but those are not going to be any time soon.
Your best bet at this point is to look for a used and damaged phone and replace the board in your phone with a different board. Find a k8+ lm-x210ulm or an aristo 2 board. They are cheap around $20 us and can be found with broken screens. They have no arb values so can be flashed and downgraded to get the boot loader unlocked and reflashed and upgraded after with guidance.
Dont feel to bad it happens. I have 4 boards that are trash but im still gonna try to unbrick them. But please what ever you do dont do it with out guidance. pm if you need and ill help.
Duhjoker said:
There are two versions of the k8+ a qualcomm version and an mtk version. Did you read my post after your last reply. I was trying to help you determine that sort 0f thing.
As for a fix.... no as of currently there is no fix for either the qc or mtk versions once bricked. i am working on possible solutions but those are not going to be any time soon.
Your best bet at this point is to look for a used and damaged phone and replace the board in your phone with a different board. Find a k8+ lm-x210ulm or an aristo 2 board. They are cheap around $20 us and can be found with broken screens. They have no arb values so can be flashed and downgraded to get the boot loader unlocked and reflashed and upgraded after with guidance.
Dont feel to bad it happens. I have 4 boards that are trash but im still gonna try to unbrick them. But please what ever you do dont do it with out guidance. pm if you need and ill help.
Click to expand...
Click to collapse
Did you found some method for unbrick this phone without motherboard change ?