Hi, Guys.
I just installed new OREO Firmware CRB7 [PDA G950FXXU1CRB7-CSC G950FOXM1CRAP-BL G950FXXU1CRB7 (DBT) - Changelist 12993656] and I did exactly the same steps as in the previous CRAP Firmware – HERE ( https://forum.xda-developers.com/galaxy-s8/development/oreoodin-official-firmware-galaxy-s8-t3748669 ).
This time I’ve used a new ODIN, v3.12.10.1, and I didn’t absolutely NOTHING different from what I had already done in the previous flash, so there is nothing more to add to what was said earlier, just follow what it has been said, as simple as that.
I'm so sorry no longer available to answer user questions, but understand that I'm just reporting something I just did, without any kind of problems.
Other questions that could be put beyond all that has been said, I could only answer with certainty if I had experienced this same doubt, that is, I would have to reproduce the problem to give the answer, understand?
Has anyone asked if through an update via update.zip could install Recovery TWRP or Root ... I would say yes, but I can not be sure of this because I never did ... it's a matter of trying!
So I leave here the LINK of new firmware, to be installed via ODIN, just like any other firmware to be installed this way ... there are no secrets.
I also leave LINK for Magisk v16.0 (1600), Magisk Manager v5.6.1, Magisk Uninstaller 2018-02-22 and TWRP 3.2.1-0 dreamlte, for anyone who needs this software.
Good Luck to All
PDA G950FXXU1CRB7 - CSC G950FOXM1CRAP - BL G950FXXU1CRB7 (DBT)
https://www.androidfilehost.com/?fid=746010030569955941
Magisk v16.0(1600)+MagiskManager v5.6.1+MagiskUninstaller_2018-02-22
https://www.androidfilehost.com/?fid=962187416754462528
Odin3 v3.12.10.1
https://www.androidfilehost.com/?fid=673956719939821692
TWRP 3.2.1-0 dreamlte
https://www.androidfilehost.com/?fid=746010030569953853
Hi. I have not yet installed any custom ROM, just installed TWRP and Magisk. Later I'm going to test some ROMs, but so far everything is perfect, no problem.
I already had a custom ROM before flashing the new firmware, so maybe I had no problems installing the TWRP or Root
Does this work on 950FD?
I'm on 'CRAP' right now.
Thanks
it does not let me flash the twrp, it tells me that only official binaries
juan_itoo said:
it does not let me flash the twrp, it tells me that only official binaries
Click to expand...
Click to collapse
Because phone is on Prenormal Status, no? If so, you may attend 7 days with phone ON, without restart them (I think [emoji848]).
S8 [email protected] v7.3.4(109)
limafranco said:
Does this work on 950FD?
I'm on 'CRAP' right now.
Thanks
Click to expand...
Click to collapse
Sincerely? I don't know, buddy! But phones I think identicals, so yes [emoji57]
S8 [email protected] v7.3.4(109)
This
juan_itoo said:
This
Click to expand...
Click to collapse
[emoji21]Just like I said
S8 [email protected] v7.3.4(109)
trocopassu said:
Sincerely? I don't know, buddy! But phones I think identicals, so yes [emoji57]
S8 [email protected] v7.3.4(109)
Click to expand...
Click to collapse
Yes, it works.
I just flashed. Its the same FW for both versions (Exynos)
How u r knox 0x0 after flashing twrp and magisk @trocopassu
mayank233 said:
How u r knox 0x0 after flashing twrp and magisk @trocopassu
Click to expand...
Click to collapse
Custom Kernel
S8 [email protected] v7.3.4(109)
Samsung just released a new Odin version that fixes the problem of the new compression files.
Now the flash is done the old way
PS: Odin version 3.13.1
Please, a mirror of the ROM
alejobog said:
Please, a mirror of the ROM
Click to expand...
Click to collapse
Hi.
File to download is not ROM but the Official Stock Firmware for the S8 G950F.
Now, new ODIN with has .lz4 file support, so you can download Official Stock Firmware directly from SamMobile and flash this on your S8 G950F (or other) with the new ODIN.
I leave here LINKs for SamMobile G950F Firmware and ODIN with support for .lz4 files
ODIN (.lz4 support) - https://www.androidfilehost.com/?fid=746010030569958654
SamMobile G950F (firmware) - https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
hello ... after installing without any problem I wanted to install TWRP and I get this message in download mode 'Only official released binaries are allowed to be flashed' ... until here comes, I think I'll have to wait a week for it to be unlock ...
I also have a question ... then I can install TWRP, root, magisk, viperfx, etc. ??
I appreciate your advice and experiences in this regard ... or if you know of any solution to avoid having to wait. Thank you.
ppelao3k said:
hello ... after installing without any problem I wanted to install TWRP and I get this message in download mode 'Only official released binaries are allowed to be flashed' ... until here comes, I think I'll have to wait a week for it to be unlock ...
I also have a question ... then I can install TWRP, root, magisk, viperfx, etc. ??
I appreciate your advice and experiences in this regard ... or if you know of any solution to avoid having to wait. Thank you.
Click to expand...
Click to collapse
Yes, same problem.
if I have this message in download mode --- 'Only official released binaries are allowed to be flashed' after having installed official CRB7 --- can I flash official AQL5 ROM to go back to version 7 and thus be able to install TWRP ??
Please advise before doing so, as I understand in the state that is today, I must wait a week to install something in download mode ... is it correct?
If I make a mistake without asking, I could be without a phone for a week and I would have to commit suicide ... hahaha
Thank you.
Well I just have to thank the help that trocopassu gave to me to install the rom, was of extreme importance
Best wish to her
VITMAD said:
Well I just have to thank the help that trocopassu gave to me to install the rom, was of extreme importance
Best wish to her
Click to expand...
Click to collapse
Thanks, matte. Congratulations also to you for your decision.
how could you manage to flash without giving instruction about OEM unlock? i dont have option in dev mode for OEM unlock.
Related
Hi guys,
Anyone can guide me how to flash to the latest Official CM13? Currently my device is KIW-L22 running 13.0-20160718-UNOFFICIAL-kiwi. It's been too long since I got time to browse XDA and is really lost on the steps.
Assist me pls! thanks!
awesomeandroid said:
Hi guys,
Anyone can guide me how to flash to the latest Official CM13? Currently my device is KIW-L22 running 13.0-20160718-UNOFFICIAL-kiwi. It's been too long since I got time to browse XDA and is really lost on the steps.
Assist me pls! thanks!
Click to expand...
Click to collapse
To flash the latest version of CM, be sureto have updated your phone officially to Stock Marshmallow. If not latest CM will not flash. You an error.
I'm guessing your phone is Indian version? Anyways go to the huawei website of your country. Download the marshmallow software file there and upgrade it through force update like i recommended here -> http://forum.xda-developers.com/honor-5x/help/gr5-help-t3443573
I think you should go into your current custom recovery first and wipe data/factory reset. So u don't get bootloop as a result of CM files being on board currently.
The firmware in the link above is not for your country/device but for Egypt KII-L21CUST185.
So get the correct file for your device for your country's huawei website as mentioned above.
After flashing successfully, you have to flash custom recovery, again. Remember the whole 'fastboot flash recovery recovery.img' process then flash SuperSU in custom recovery to root? Yeah do that.
Now you can flash latest CM build again. Cheers!
Note: If your country doesn't have marshmallow (6.0.1) available, don't bother with the process as latest CM build will not flash.
stanley08 said:
To flash the latest version of CM, be sureto have updated your phone officially to Stock Marshmallow. If not latest CM will not flash. You an error.
I'm guessing your phone is Indian version? Anyways go to the huawei website of your country. Download the marshmallow software file there and upgrade it through force update like i recommended here -> http://forum.xda-developers.com/honor-5x/help/gr5-help-t3443573
I think you should go into your current custom recovery first and wipe data/factory reset. So u don't get bootloop as a result of CM files being on board currently.
The firmware in the link above is not for your country/device but for Egypt KII-L21CUST185.
So get the correct file for your device for your country's huawei website as mentioned above.
After flashing successfully, you have to flash custom recovery, again. Remember the whole 'fastboot flash recovery recovery.img' process then flash SuperSU in custom recovery to root? Yeah do that.
Now you can flash latest CM build again. Cheers!
Note: If your country doesn't have marshmallow (6.0.1) available, don't bother with the process as latest CM build will not flash.
Click to expand...
Click to collapse
Noted with thanks! It's really clear what you've explained! :good:
awesomeandroid said:
Noted with thanks! It's really clear what you've explained! :good:
Click to expand...
Click to collapse
Glad i could help. Take care.
stanley08 said:
Glad i could help. Take care.
Click to expand...
Click to collapse
Bummer, on Malaysia official website, only official Lollipop and not Marshmellow.
awesomeandroid said:
Bummer, on Malaysia official website, only official Lollipop and not Marshmellow.
Click to expand...
Click to collapse
they should skip to nougat now
PalakMi said:
they should skip to nougat now
Click to expand...
Click to collapse
Impossible? Lol
awesomeandroid said:
Impossible? Lol
Click to expand...
Click to collapse
Haha yup
PalakMi said:
Haha yup
Click to expand...
Click to collapse
Hey guys, it's been awhile again, and I've yet to flash as accordingly taught. So is there already any easier method than flashing stock MM based EMUI and flashing again to custom?
Hello everyone,
Firstly, I would like to apologize if this question has been answered before, I simply cannot find the answer for it. So I am currently rooted on 5.1.1 with, (according to the About Device section of my phone)
Kernel version:
3.10.61-S6_Unikernel_v9-0000initial
[email protected] #1
Thu Sep 10 19:10:19 BST 2015
Build Number: XtreStoLite Deo Mod v.2.4 - XXU3COI9
According to my model number, it says my model number is SM-G925K, but my original build number was SM-G925W8.
Also, I am using TWRP recovery
So like I have started in the title, I would like to update to 6.0.1 stock, and then root it and install a custom rom. I have bought my phone from Rogers, and am on a 2 year contract with them.
I am COMPLETE noob when it comes to this, so anything to help is appreciated, I recently switched from iPhone to Android
EDIT #1: I am only asking this question because my carrier has not rolled out the firmware yet, and I am not on stock firmware anymore so I was wondering if it was possible to update, I don't want to end up with a bricked device
RandomUsername02 said:
Hello everyone,
Firstly, I would like to apologize if this question has been answered before, I simply cannot find the answer for it. So I am currently rooted on 5.1.1 with, (according to the About Device section of my phone)
Kernel version:
3.10.61-S6_Unikernel_v9-0000initial
[email protected] #1
Thu Sep 10 19:10:19 BST 2015
Build Number: XtreStoLite Deo Mod v.2.4 - XXU3COI9
According to my model number, it says my model number is SM-G925K, but my original build number was SM-G925W8.
Also, I am using TWRP recovery
So like I have started in the title, I would like to update to 6.0.1 stock, and then root it and install a custom rom. I have bought my phone from Rogers, and am on a 2 year contract with them.
I am COMPLETE noob when it comes to this, so anything to help is appreciated, I recently switched from iPhone to Android
EDIT #1: I am only asking this question because my carrier has not rolled out the firmware yet, and I am not on stock firmware anymore so I was wondering if it was possible to update, I don't want to end up with a bricked device
Click to expand...
Click to collapse
First Download samsung smartswitch And restore Ur Device to factory Defaults It will wipe ur phone so backup ur files and it will install lastest frimware avilable which 6.0.1 after that u can root ur phone by flashing cf-auto-root and twrp after that u can install ur custom rom
I hope it helps you if u have any further question hit me up
osman34 said:
First Download samsung smartswitch And restore Ur Device to factory Defaults It will wipe ur phone so backup ur files and it will install lastest frimware avilable which 6.0.1 after that u can root ur phone by flashing cf-auto-root and twrp after that u can install ur custom rom
I hope it helps you if u have any further question hit me up
Click to expand...
Click to collapse
Okay so instead of updating via smartswitch, I downloaded the firmware via a website (not sure if I am able to mention it here, but I won't anyway) for my model (SM-G925W8) and flashed it via Odin. Then I rooted via CF-AutoRoot by Chainfire, and am currently installing Xtrestolite 3.3.1
RandomUsername02 said:
Okay so instead of updating via smartswitch, I downloaded the firmware via a website (not sure if I am able to mention it here, but I won't anyway) for my model (SM-G925W8) and flashed it via Odin. Then I rooted via CF-AutoRoot by Chainfire, and am currently installing Xtrestolite 3.3.1
Click to expand...
Click to collapse
ok Cool am Glad U made it xD
osman34 said:
ok Cool am Glad U made it xD
Click to expand...
Click to collapse
What are custom kernels? Do I need one? What is SELinux and should it be Permissive or Enforcing?
RandomUsername02 said:
What are custom kernels? Do I need one? What is SELinux and should it be Permissive or Enforcing?
Click to expand...
Click to collapse
SELinux is a set of kernel modifications and user-space tools
u dont need custom kernel as my opinion
custom kernels with comes Permissive
and official kernels comes with enforcing
osman34 said:
SELinux is a set of kernel modifications and user-space tools
u dont need custom kernel as my opinion
custom kernels with comes Permissive
and official kernels comes with enforcing
Click to expand...
Click to collapse
I don't know if this is significant, but the reason I asked about SELinux is because when I open TWRP manager and it tells me my TWRP version, it says Please set SELinux to Permissive in order to view this
I need help to unbrick my phone. Here are the details of my phone and things I did before it became useless.
- Version: Updated version of Samsung Galaxy S6 Edge Marshmallow Android 6.0.
- replaced its recovery with TWRP via odin (3.10.6)
- install a ROM with the use of TWRP recovery.
- After rooting my phone and flashing a new rom via TWRP, I can't use my phone's physical buttons.
I also tried full-wipe installation of Custom rom and I got the same issue. I tried restoring it to a stock rom, but it always says "Fail".
Do you guys have any suggestions how can I fix my phone?
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
callumbr1 said:
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
Click to expand...
Click to collapse
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
lexeroy said:
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
Click to expand...
Click to collapse
Have you flashed the stock firmware you just posted?
callumbr1 said:
Have you flashed the stock firmware you just posted?
Click to expand...
Click to collapse
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
lexeroy said:
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
Click to expand...
Click to collapse
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
callumbr1 said:
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
Click to expand...
Click to collapse
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
lexeroy said:
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
Click to expand...
Click to collapse
I will pm you the link.
Ohhhh thanks man! Finally this BTU firmware worked to my phone! ???
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
lexeroy said:
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
Click to expand...
Click to collapse
I suggest TWRP. Make a full Nandroid back up before just incase. But if anything goes wrong you can just flash that stock back to fix.
I would root first with cf autoroot.
Then flash your ROM.
Do a full wife when rom installer asks as this is safest way.
If it bootloops just wait.
Glad i can help
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
lexeroy said:
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
Click to expand...
Click to collapse
It is compatible im using it mate. Did you do a clean install? Wipe data when installer asks? My first boot took around 30 mims
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
lexeroy said:
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
Click to expand...
Click to collapse
Which kernel did you install when the installer asked you? Yeah id say its probably the most stable rom for s6 edge.
Did you do full wipe in aroma?
So, some of you might have noticed that I made some thread in General section, for Oreo TWRP Backup.
Some people do not like this idea, therefore I created a TWRP flash-able .zip for that.
I recommend a full wipe, or even a format data before flashing this.
Download the 3 zips, flash in order, boot, enjoy.
The files are stamped with a number, so you know what to flash in which order. Easy right ?
There is no root. I've heard SuperSU works flawlessly, but did not try as I am fine without it.
Downloads :
ROM:
https://drive.google.com/open?id=1zlFu-U2hxy2fvrkrHfZwxRMfZOBNSCoy
DmVerity:
https://drive.google.com/open?id=1AO3IgiJCDPtZD1LuS7T8viizjBGwVCWK
Fix:
https://drive.google.com/open?id=1PsMUCPOzQm6d8YS2SP9tpyK1_hgIqjiG
FOR DEVS : Beta 2 Partitions Dump feel free to use this, however please do credit me in your Aroma and XDA threads : https://drive.google.com/open?id=1RTzxthFvrV6-yU9yDwkceTGpF5srcTO7
Thanks to ambasadii, for his updater-script that I based this on.
what is the difference between the flashable and the partitions dump ?
knox
Will this trigger knox?
So is odin flashable rom !!! if yes use the word ODIN to be clear for someone ....thx
austriacus said:
what is the difference between the flashable and the partitions dump ?
Click to expand...
Click to collapse
No difference at all.
popmpopm said:
So is odin flashable rom !!! if yes use the word ODIN to be clear for someone ....thx
Click to expand...
Click to collapse
No, TWRP Flashable.
raj_p said:
Will this trigger knox?
Click to expand...
Click to collapse
This requires TWRP; if you have TWRP then your knox is already tripped.
@Paradoxxx
Please add step-wise guide to avoid confusion for people (whether to flash using Odin or TWRP).
Thank you. It has been very beautiful. everything works.
madnav said:
This requires TWRP; if you have TWRP then your knox is already tripped.
@Paradoxxx
Please add step-wise guide to avoid confusion for people (whether to flash using Odin or TWRP).
Click to expand...
Click to collapse
I added a big TWRP with bold and underline. That should do
ok nice but add TWRP in title
Any specific bootloader I have to be on? I'm on AQJ1 now...
Sent from outer space
cop1976 said:
Any specific bootloader I have to be on? I'm on AQJ1 now...
Sent from outer space
Click to expand...
Click to collapse
Should be working. If not AQH3 will do.
Does locking the phone work correctly?
Thanks
Downloading.
Which version od SuperSU will work? 2.85 or? If someone tested. If not, I'll test it by myself B)
How to enter recovery after flashing this rom? Bixby + vol up not working for me
Sent from outer space
Hi,
I'm a bit confused, how can i do to go back to stock firmware after installing this ?
Thanks
Anyone able to enter settings in Samsung mail?
For me, when pressed it takes you back to the inbox.
popmpopm said:
So is odin flashable rom !!! if yes use the word ODIN to be clear for someone ....thx
Click to expand...
Click to collapse
He hasn't used the term Odin but TWRP, if you're dyslexic or simply haven't been taught how to read don't post.
Hi flashing that update last nite on stock firmware BTU S8 boot ok but all apss and touchwiz crash all time no way to work so reflash with odin stock firmware.
maciejireland said:
Hi flashing that update last nite on stock firmware BTU S8 boot ok but all apss and touchwiz crash all time no way to work so reflash with odin stock firmware.
Click to expand...
Click to collapse
I have flash the 3 files and all perfectly work on my G950F, before i was on AQH3 XEF (France). Samsung health work, secured folder too. I juste have a "problème", it's that we can't install update by OTA. If your phone with this files crash, it's maybe because you don't have wipe with twrp before.
A bit of new stuff :
Lock screen security fixes :
950F:
https://drive.google.com/open?id=1PsMUCPOzQm6d8YS2SP9tpyK1_hgIqjiG
955F:
https://drive.google.com/open?id=1_rC4jnWEpd74shw_QzFbLmuz6yEiBqmh
Hello! I've been trying to install a custom ROM on my SM-J400M for a while now and none worked, recently i tried installing Magisk on it and now it is in a bootloop . Is there any custom ROM compatible with my device? Or it is impossible to install a custom ROM on it? At the moment it seems like it is not even rootable...
Also the version of TWRP that i installed on my device says that it is an SM-J400F instead of a SM-J400M which is the actuall name of the model. Is that a problem? If so please tell me how to unistall it, i wasnt able to find any way to uninstal TWRP on a soft-bricked phone.
Thanks in Advance!
TheChadGamer said:
Hello! I've been trying to install a custom ROM on my SM-J400M for a while now and none worked, recently i tried installing Magisk on it and now it is in a bootloop . Is there any custom ROM compatible with my device? Or it is impossible to install a custom ROM on it? At the moment it seems like it is not even rootable...
Also the version of TWRP that i installed on my device says that it is an SM-J400F instead of a SM-J400M which is the actuall name of the model. Is that a problem? If so please tell me how to unistall it, i wasnt able to find any way to uninstal TWRP on a soft-bricked phone.
Thanks in Advance!
Click to expand...
Click to collapse
I've managed to un-brick my phone! Still found no way to install a custom ROM on it tho...
TheChadGamer said:
Hello! I've been trying to install a custom ROM on my SM-J400M for a while now and none worked, recently i tried installing Magisk on it and now it is in a bootloop . Is there any custom ROM compatible with my device? Or it is impossible to install a custom ROM on it? At the moment it seems like it is not even rootable...
Also the version of TWRP that i installed on my device says that it is an SM-J400F instead of a SM-J400M which is the actuall name of the model. Is that a problem? If so please tell me how to unistall it, i wasnt able to find any way to uninstal TWRP on a soft-bricked phone.
Thanks in Advance!
Click to expand...
Click to collapse
Is There Any Custom ROM for Samsung Galaxy J4?
YES!
Although, this is not specific Custom ROM for this device. This ROM is GSI (Generic System Image), and J4 is greatly support it! (Because it has Android Oreo out-of-box)
How to install it?
Easy, install TWRP from TwrpBuilder's Github, flash GSI Image as usual, flash magisk (if bootloop, flash this might help), and done!
Please note that this is GSI, bugs are widely open. But, as far as I use J4, the only bug I feel are Camera and MTP (fixed by using custom kernel)
Edit: For your TWRP, which version you install?
RedLine_27 said:
Is There Any Custom ROM for Samsung Galaxy J4?
YES!
Although, this is not specific Custom ROM for this device. This ROM is GSI (Generic System Image), and J4 is greatly support it! (Because it has Android Oreo out-of-box)
How to install it?
Easy, install TWRP from TwrpBuilder's Github, flash GSI Image as usual, flash magisk (if bootloop, flash this might help), and done!
Please note that this is GSI, bugs are widely open. But, as far as I use J4, the only bug I feel are Camera and MTP (fixed by using custom kernel)
Edit: For your TWRP, which version you install?
Click to expand...
Click to collapse
Thanks for the reply!
I recently discovered that my Samsung J4 is carrier locked so i don't think it is possible to flash a custom ROM in it...
I really tried many things since this post but in the end it would always get stuck in a boot loop and i would have to flash the official firmware in it to restore it.
What TWRP version did i use?
I honestly don't remember but it probably was a unofficial TWRP 3.2.3 or something similar, not sure if it was unofficial or not but it seemed to work...
Also, how would i go around getting a custom kernel to use on the device that would fix those problems?
Again, thanks for replying!
-TheChadGamer
TheChadGamer said:
Thanks for the reply!
I recently discovered that my Samsung J4 is carrier locked so i don't think it is possible to flash a custom ROM in it...
I really tried many things since this post but in the end it would always get stuck in a boot loop and i would have to flash the official firmware in it to restore it.
What TWRP version did i use?
I honestly don't remember but it probably was a unofficial TWRP 3.2.3 or something similar, not sure if it was unofficial or not but it seemed to work...
Also, how would i go around getting a custom kernel to use on the device that would fix those problems?
Again, thanks for replying!
-TheChadGamer
Click to expand...
Click to collapse
I use TWRP 3.2, and flashed MY builded custom kernel (Only for GSI!) https://forum.xda-developers.com/galaxy-j/development/kernel-redline-kernel-samsung-galaxy-j4-t4188199/
You need to update to Android 10 Stock then flash the A64 A/B GSI. And remember to flash dm verity disabler then flash Magisk. Magisk is important too.
For more info about this, feel free to join our telegram group : https://t.me/SamsungGalaxyJ4
In there we have detail instruction to flash GSI for J4. And other issue discussion
I can't write the steps here, because the steps is little complicated. Cheers!
Thank you for your help!
Soon i will be giving it another attempt then !
Sorry for taking so long, even the site had a upgrade!
I actually am using Linux now but i am dualbooting with Windows to be able to use Odin. I have just now entered the Telegram group,
NamaSayaHendra said:
In there we have detail instruction to flash GSI for J4.
Click to expand...
Click to collapse
Where can i find those instructions in the group? I have never used Telegram before so i don't know where to look for them