first test build by the new team dirtyunicorns (now merged with team evervolv) is online
plus.google.com/+WilliamBellavanceJr/posts/P88ovUSgiFx
https://plus.google.com/+WilliamBellavanceJr/posts/VQcjesTRHsh
edit:
new rc rom is available. download on the dirtyunicorn site
dirtyunicorn 12.5.3 from 16.11.2018
https://download.dirtyunicorns.com/?device=tenderloin
korporalkarotte said:
first test build by the new team dirtyunicorns (now merged with team evervolv) is online
plus.google.com/+WilliamBellavanceJr/posts/P88ovUSgiFx
Click to expand...
Click to collapse
Yes you are correct, and you can use this alternate method to install that very ROM,
Nevertells2 and I worked hard on the documentation for this method, and there is even
a YouTube Video!! CLICK HERE FOR ALT METHOD
DoubleStuff said:
Yes you are correct, and you can use this alternate method to install that very ROM,
Nevertells2 and I worked hard on the documentation for this method, and there is even
a YouTube Video!! CLICK HERE FOR ALT METHOD
Click to expand...
Click to collapse
Thanks DoubleStuff! Since I went back from EV to an older TP ROM (JC Sullins 4.4.4) I will "start over" and try your method. I am guessing I will need to find and install the latest TWRP (I went back to an older TWRP 2.7.1.0) ?
Also very curious how you like the DU ROM? Thanks again!!
Nomad1600 said:
Thanks DoubleStuff! Since I went back from EV to an older TP ROM (JC Sullins 4.4.4) I will "start over" and try your method. I am guessing I will need to find and install the latest TWRP (I went back to an older TWRP 2.7.1.0) ?
Also very curious how you like the DU ROM? Thanks again!!
Click to expand...
Click to collapse
Yes if you want to install Dirty Unicorn 8.1 all the links are in the link above for ALT METHOD the TWRP, Gapps and ROM...
I have installed the DU ROM 8.1, and took it for a nice test drive, I like it and so far not much lag. I pretty much only watch YouTube videos, I listen to PodCasts and look at Weather Apps. It has a nice clean look, and so far so good.
P.S. Bluetooth does not pair yet, and no camera yet, and the Open Camera app does not work either....
So if your happy with KitKat 4.4 and don't have another TP, then I would stick with 4.4 because like Nevertells2 always says, "...I always end up back to KitKat...", but maybe once Dirty Unicorns gets bluetooth and camera working this 8.1 ROM might have potential because its it the low Ram "GO" version....
Thanks for sharing
excellent work I have three days with the rom and all good, the bar wifi does not indicate intensity but I improve and it is very stable the camera remains the same as far as the use in streaming to improved is impeccable in you tube if I observe that it is necessary to optimize the kernel and manage an internal cleaner of the ram just that excellent job
excelente trabajo tengo tres dias con la rom y todo bien, la barra wifi no indica intensidad pero mejoro y es muy estable la cmara sigue igual en cuanto al uso en streaming a mejorado es impecable en you tube si observo que hay que optimizar el kernel y gestionar un limpiador interno de la ram solo eso excelente trabajo
---------- Post added at 11:24 AM ---------- Previous post was at 11:21 AM ----------
thanks please optimize the kernel and add a ram cleaner inside the rom itself very good achievement team are the best they are great
---------- Post added at 11:28 AM ---------- Previous post was at 11:24 AM ----------
DU ROM 8.1 has an address for the download file of agradesco updates, it is excellent for your first job, but I do not know if we already have an update in March
---------- Post added at 11:34 AM ---------- Previous post was at 11:28 AM ----------
DU ROM 8.1 has an address for the download file of agradesco updates, it is excellent for your first job, but I do not know if we already have an update in March
I'm using the 8.1 daily 8.1 Dirty Unicorn 8.1 and is the most stable in 8.1 or 8 is the best I can only say that this is missing blueto, camera and the wifi icon, I would like to optimize the kernel and take the nuclei to options Optimal equilibrium and have the latest default video codex is a great job I am very happy and congratulate Dirty Unicorn is impeccable excelnete can improve at the moment load the version with several opengap options 8.1 even full digue package being the best nano option but fucniona with another given more space in system I think if you give the double cache in space instead of 200 goes better
larrywilson said:
I'm using the 8.1 daily 8.1 Dirty Unicorn 8.1 and is the most stable in 8.1 or 8 is the best I can only say that this is missing blueto, camera and the wifi icon, I would like to optimize the kernel and take the nuclei to options Optimal equilibrium and have the latest default video codex is a great job I am very happy and congratulate Dirty Unicorn is impeccable excelnete can improve at the moment load the version with several opengap options 8.1 even full digue package being the best nano option but fucniona with another given more space in system I think if you give the double cache in space instead of 200 goes better
Click to expand...
Click to collapse
You definitely need to get better online translator. That's incomprehensible.
new build (rc) is online
plus.google.com/+WilliamBellavanceJr/posts/3dzT5aaZmwh
Latest HP Touchpad build with L3 DRM. You won't have HD video but at least you can stream.
* Still working on BT
* Home key doesn't wake the device
* Camera doesn't work yet
* Root is a bit tricky but was able to get it
*deleted*
Now that root is established, has anyone tried restoring apps through Titanium Backup from latest 7.x build to 8.x Go build after clean install?
[KERNEL]SKZ Custom Kernel for Dirty Unicorns o.8.x [1890KHz CPU/320MHz GPU]
Update available with persistent root and sociopath tcp congestion algorithm restored.
[UPDATE]SKZ Custom Kernel for Dirty Unicorns o.8.x [1890KHz CPU/320MHz GPU]
Update available:
merge upstream
Speed Up EarlySuspend.
Enjoy
[KERNEL]SKZ Custom Kernel for Dirty Unicorns o8x [1890KHz CPU/320MHz GPU]
Update available:
Fix Chrome Browser force close
Chrome now works. I'll leave this in until flintman has time to include it his updates.
Enjoy
Hi Sumash,
Thanks, I have one questions (being new at this). I have du_tenderloin-v12.0-20180306-1143-RC installed now and do I just install over the the top or is there a different procedures that I have to do? Again, thanks for doing this.
_dave said:
Hi Sumash,
Thanks, I have one questions (being new at this). I have du_tenderloin-v12.0-20180306-1143-RC installed now and do I just install over the the top or is there a different procedures that I have to do? Again, thanks for doing this.
Click to expand...
Click to collapse
Flash it as usual, right after the ROM. If you've already flashed the ROM, just flash the kernel over it.
shumash said:
Flash it as usual, right after the ROM. If you've already flashed the ROM, just flash the kernel over it.
Click to expand...
Click to collapse
I have found this through an experiment...When I use the below clean install alternate method to install the 8.1 ROM....
https://forum.xda-developers.com/hp-touchpad/general/rom-guide-alternative-method-to-install-t3575861
Flashing these 4 zips:
du_tenderloin-v12.0-20180306-1142-RC.zip
FLINTMAN-TWRP-touch-data_media-SELINUX-f2fs-3.1.0-0-5-09-17.zip
open_gapps-arm-8.1-pico-20180317.zip
SKZ-tenderloin-kernel-DU-o8x-caf_03_17_2018.zip
It seems to work but when doing the Android initialization setup, putting in Internet password, then gmail password...then after the last step I get the error posted below. This has happened to me on 2 Touchpads, but when I leave out
SKZ-tenderloin-kernel-DU-o8x-caf_03_17_2018.zip then it flashes fine, and it seems like I can then flash this after everything is setup.
Any comments on this ShumashG ?
DoubleStuff said:
I -SNIP-
Any comments on this ShumashG ?
Click to expand...
Click to collapse
Nope.
New tenderloin RC 18.3.2018 on dirtyunicorns download Site
download.dirtyunicorns.com/?dir=tenderloin/Rc
Related
install with philz recovery or twrp v3 omni2 @mparus
- if it does not capture data configure an existing apn with the data of your operator and guardians
-to start Meteos on mobile networks and choose 3g
-quit Chinese videos in file explorer.Inters in application
-address gives you the 3 points above to the right settings and disable recent animations and video
-pospose browser with google spain by default
Enter in the application advanced settings set start page i put google.es
Export contacts to sd that in the last does not synchronize well sometimes @mparus kernel
install gaps with google installer
clean install new rom with phil or twrp 3
Export contacts to sd and load con miui
credits 136fei and glokin666 @mparus
changes made by me flatstyle icons more wallpapers delete chinese apps,add adaptation for g760 thanks glokin666
downloads:
-google installer
https://mega.nz/#!NMYCiLpa!fNReSObASJPo-v8qZQJY2Smax3kHwGp5Oq3tv9ffXGk
rom
https://mega.nz/#!1ZomQDYT!l2KcqRS_QveTX3SBSfbZzEdvMKZkhBa8-lpM3PGm3jk
recovery https://mega.nz/#!INRgHBhI!R9wSKYiZmF2Dwj8mBYwtWFP82uWBBvw0UAlkEzza2n8
Supported device?? Will it support Che1-L04???
Sent from my Che1-L04 using Tapatalk
is port from honor 4x cm13 dianlujitao base original thread. http://bbs.zhiyoo.com/thread-13174898-1-1.html
@desalesouche @mparus this ROM is ultrafast and great batery life is posible update the kernel?
luistro said:
@desalesouche @mparus this ROM is ultrafast and great batery life is posible update the kernel?
Click to expand...
Click to collapse
Provide me kernel source of your work and i will see.
desalesouche said:
Provide me kernel source of your work and i will see.
Click to expand...
Click to collapse
is cm13 kernel mparus patched for miui this kernel is from june .mparus patched one and no working sd card
old build with mparus kernel sd card1 not detect and some lags after one day
https://www.androidfilehost.com/?fid=673368273298920367
miui v8 6.0. sources. https://github.com/MiCode/patchrom
luistro said:
is cm13 kernel mparus patched for miui this kernel is from june .mparus patched one and no working sd card
old build with mparus kernel sd card1 not detect and some lags after one day
https://www.androidfilehost.com/?fid=673368273298920367
miui v8 6.0. sources. https://github.com/MiCode/patchrom
Click to expand...
Click to collapse
i can't help...
new versión. https://mega.nz/#!oU4RmCRI!LjfJeDUem...6Oo0xeb9Th1F1c
nueva versión
para eliminar 4 aps chinas dar acceso root en segurdad permisos acceso raíz
https://mega.nz/#!NMYCiLpa!fNReSObAS...Gp5Oq3tv9ffXGk
google installer
https://mega.nz/#!NMYCiLpa!fNReSObAS...Gp5Oq3tv9ffXGk
@mparus
The link can't be accessed, need decription key ?
kamilb365 said:
The link can't be accessed, need decription key
Click to expand...
Click to collapse
https://mega.nz/#!oU4RmCRI!LjfJeDUemXQhmaog8DSWlAV4FaI_H6Oo0xeb9Th1F1c
Build mparus kernel
https://mega.nz/#!aQtDhLIC!RzaWs4taEPb3by_KED_oGTmyNyXIzEJzmm_TPn1ZyOw
Video and MP3/AAC files can't be played on latest build.
new version
New build changlog link please ?
new build in da house
luistro said:
new build in da house
Click to expand...
Click to collapse
New version link is : MIUI8-Marshmallow-g760 -7.03.20.zip ??
And changelog please.
freeforce said:
New version link is : MIUI8-Marshmallow-g760 -7.03.20.zip ??
And changelog please.
Click to expand...
Click to collapse
yes.
changelog
App Lock
New - Option for hiding the content of notifications on Lock screen (03-16)
System
Optimization - Stability and system speed optimization
Hi, I have some questions:
1. NFC is working?
2. Gyro is working?
3. USB OTG is working?
4. GPS is working good? or there are some issues?
5. What does not work properly?
Thx
luistro said:
yes.
changelog
App Lock
New - Option for hiding the content of notifications on Lock screen (03-16)
System
Optimization - Stability and system speed optimization
Click to expand...
Click to collapse
Are you going to update the rom bimonthly? (which is a good idea for miui roms)
I am asking this bec. installing fresh miui rom everytime is really time consuming lol.
also there is a problem with xposed, not sure if its rom related but when if I reboot, xposed becomes deactivated, then I have to reboot couple of times to get it working again. Would you mind looking into it, when you have time.
This is the only problem I came across! keep up the good work my friend!
Removed
Reserved
So this post will be dedicated to information about EAS in general.
EAS is a completely different breed compared to the conventional HMP system, where it serves an entirely different purpose of achieving the optimal balance between performance and efficiency, with the latter taking the top spot. EAS achieves that via cleverer tasks placement, by which the system determines which is the more efficient cluster for the task to be processed by, as well as categorising the different tasks into cgroups (top-app, foreground and background, in order from highest priority to lowest priority respectively) by which each cgroup receives its sliver of the available firepower (cpuset). EAS also offers the capability of inflating the perceived load, that's determined by the load trackers, of the task in any of the cgroups via its schedtune.boost setting, and whether the task should be processed by all the cpu cores available or only by the cluster the task has been placed on via its schedtune.prefer_idle setting. One of the key features of EAS is lifting almost all the processing from the governor to the CPU scheduler (no it is not the I/O scheduler, something different) and letting it take much much more control, leaving the CPU governor to only do the frequency determination part, which unsurprisingly relies heavily on data supplied by the scheduler. With all that said, it is easily deduced that EAS is not all about governors and governor settings and the like, rather a much cleverer solution that serves the purpose of seeking the best balance between performance and efficiency, and to ensure the CPU is not overdoing a task or the CPU governor is overshooting a simple task, which would attribute to needlessly draining a lot of power as a natural consequence. EAS is about ensuring you get the smoothest UI possible while retaining as much power as possible. However, that does not mean that EAS is lame poor when it comes to performance. Sometimes, if not in most cases, this cleverer tasks placement makes tasks get processed faster, a point that is already proved quite well by the EAS-supporting non-OOS based custom ROMs like VertexOS, ZeNiTy-RR and PAEX. Conserving battery does not necessarily mean crushing performance. This explains that app launches are on-par with HMP if not ahead of it sometimes.
Now on to your question. After going through that brief explanation of EAS, i think your question is actually invalid, since it is not an apple-to-apple comparison anymore. EAS seeks for the optimal balance between performance and efficiency. Should there be a commit to improve performance while not being at the expense of efficiency, EAS should have that stuffed in, whereas HMP is prioritising performance higher than efficiency by design. What Burnout does is taking HMP and making it even more performance oriented, hence it is very unlikely to face micro lags with it. However, HMP still misses the cleverer tasks placement, which can show its canines if you have so much processes going in the background, where in that area EAS takes the lead quite noticeably.
Conclusion: You should try and see what suits you more. But something i can safely say is, EAS is more than satisfactory when it comes to performance from the perspective of a man that always seeks the best performance available, and with the battery gains you yield with EAS, it can go better.
Hope i helped and clear the confusion.
Thanks to @Freak07 for the message.
Reserved
This post will be dedicated to information about Wireguard in general.
WireGuard is a next generation secure VPN tunnel for the Linux kernel, with modern yet conservative cryptography and simple design principles. It is meant as a replacement for OpenVPN and for IPsec, and generally has better performance and security characteristics than both. It also is much easier to use. The whitepaper was peer reviewed for NDSS17 and the protocol itself has been formally verified. Since it lives in the kernel, it not only is very fast, but it is able to integrate in clever ways that are quite nice for battery life and overall smoothness. There are already commercial VPN providers offering services using WireGuard, and it is very easy to run your own WireGuard servers as well.
How to use?
0. Make sure you're running a ROM or kernel that supports WireGuard.
1. Install the WireGuard app: https://play.google.com/store/apps/details?id=com.wireguard.android
2. Sign up for AzireVPN: https://manager.azirevpn.com/en/auth/register
3. Generate and download a configuration file from: https://www.azirevpn.com/cfg/wg
4. Import it into the WireGuard app using "Add from file"
5. You're done
Nice to see Alize Kernel back.
---------- Post added at 02:24 AM ---------- Previous post was at 02:09 AM ----------
When I flashed this kernel the first time my phone was in a bootloop. Then I flashed it again (same zip and same way) and now its working.
I am on alize kernel on cosmic os 8.1, can I flash this kernel over it?? or should I do a clean flash??
rishivg said:
I am on alize kernel on cosmic os 8.1, can I flash this kernel over it?? or should I do a clean flash??
Click to expand...
Click to collapse
Flash the kernel over it
rishivg said:
I am on alize kernel on cosmic os 8.1, can I flash this kernel over it?? or should I do a clean flash??
Click to expand...
Click to collapse
How do you want to make a clean flash? Formatting the /boot partition?
zeft64 said:
Flash the kernel over it
Click to expand...
Click to collapse
KingCartman said:
How do you want to make a clean flash? Formatting the /boot partition?
Click to expand...
Click to collapse
actually I had flashed the previous version of alize kernel on that ROM, since this is the latest one or the updated one, what should I do clean flash the Rom again and flash it or can I directly update it over my previous flashed alize kernel?
Thank you!
rishivg said:
actually I had flashed the previous version of alize kernel on that ROM, since this is the latest one or the updated one, what should I do clean flash the Rom again and flash it or can I directly update it over my previous flashed alize kernel?
Thank you!
Click to expand...
Click to collapse
When you have a arm64 ROM with Android O installed just flash this Kernel and enjoy.
rishivg said:
actually I had flashed the previous version of alize kernel on that ROM, since this is the latest one or the updated one, what should I do clean flash the Rom again and flash it or can I directly update it over my previous flashed alize kernel?
Thank you!
Click to expand...
Click to collapse
Like the guy under me just said just flash the kernel. Unless the op tells you otherwise as long as it's an update for this kernel it should be safe
I agree with those before me about flashing the kernel but I took mine a step further because I'm paranoid like that but in my case I was already rooted using magisk, so I used the magisk uninstaller and then flashed the kernel then reflashed magisk
tuxattack80 said:
I agree with those before me about flashing the kernel but I took mine a step further because I'm paranoid like that but in my case I was already rooted using magisk, so I used the magisk uninstaller and then flashed the kernel then reflashed magisk
Click to expand...
Click to collapse
The Kernel is part of the /boot partition.
Does Magisk modify that or why did you have to remove Magisk first.
Was that really required?
Can I flash this kernel on Cosmic OS 8.1 ??
Barbiox Dogg said:
Can I flash this kernel on Cosmic OS 8.1 ??
Click to expand...
Click to collapse
Yes. Working fine for me.
@Martichou please kindly upload the kernel to Google Drive or AndroidFileHost because it's not allowed to download from sourceforge on mobile devices.
Barbiox Dogg said:
@Martichou please kindly upload the kernel to Google Drive or AndroidFileHost because it's not allowed to download from sourceforge on mobile devices.
Click to expand...
Click to collapse
What do you mean it's not allowed?
CreasingMass Dev said:
What do you mean it's not allowed?
Click to expand...
Click to collapse
As you can see it says software downloads are not possible on this device. I'm using Chrome on iPhone and Android.
Barbiox Dogg said:
As you can see it says software downloads are not possible on this device. I'm using Chrome on iPhone and Android.
Click to expand...
Click to collapse
Tap on "try to download anyway"
CreasingMass Dev said:
Tap on "try to download anyway"
Click to expand...
Click to collapse
I have tried everything. I even clicked email link and it's still not downloading. Anyways I eventually downloaded it from my laptop. Thanks.
Cual es la mejor aplicación para modificar el kernel y las opciones en esa aplicación, la verdad nose como modificar el kernel, sobre la cpu, la gpu, e/s, etc.
Alize me pone muy lento el celular por si solo, tanto en Xperience 8.1.0 (09/01 build), como también en Pixel Experience ROM, con el kernel de defecto es fluido. En Xperience tengo Magisk 15.2 y Xposed v90-beta 1. Y en Pixel Exp. tenia solo Magisk 15.0. Alguna sugerencia?
---
Which is the best application to modify the kernel and the options in that application, the truth is not how to modify the kernel, on the cpu, the gpu, e/s, etc.
Alize makes my phone very slow by itself, both in Xperience 8.1.0 (09/01 build), as well as in Pixel Experience ROM, with the default kernel being fluid. In Xperience I have Magisk 15.2 and Xposed v90-beta 1. And in Pixel Exp. I had only Magisk 15.0. Any suggestions?
Enviado desde mi XT1680 mediante Tapatalk
Ok guys, the time arrived, just pushed O 32.0 trough OTA, this update is the latest one relative to Oreo and TugaPower ROM.
It was a long run, thanks all for the support.
April security patch its included in O 32.0
Rom link: https://tugapower.net/TP/OP1/OREO/TugaPowerO32_OP1.zip
MD5: ec155ff2a19f4139cf80e2bd142bb4c8
Reserved
Bugs report:
Most of the third apps are not being able to acess camera. Will try to debug over the week and see if can fix.
WhatsApp its confirmed working.
Third part camera apps confirmed working beside stock cam.
Camera FV5
Open camera
https://forum.xda-developers.com/showpost.php?p=75983266&postcount=85
Using panorama mode on stock cam will FC cam, bug for the time being, to be able to use cam again just clear cam cache and data prior to open again.
Still downloading!
Can we use twrp-3.1.1-x_tugapower?
Update: I need to use official https://eu.dl.twrp.me/bacon/twrp-3.2.1-0-bacon.img.html
Enviado do meu A0001 através do Tapatalk
DanielFran said:
Still downloading!
Can we use twrp-3.1.1-x_tugapower?
Enviado do meu A0001 através do Tapatalk
Click to expand...
Click to collapse
Should be just fine. Advise to use latest oficial because not being too much over TWRP the last months, on my device tested with latest oficial 3.2.1-0, but think 3.1.1-x should be still up to the work
Thanks buddy!
Many, many thanks for your hard work on this ROM that I followed on Telegram...
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Click to expand...
Click to collapse
Quick Question since my device is encrypted. How do I remove the encryption when I have a phone which does not boot?
Much thanks for the ROM
Does anyone know how to get pixel navbar with the animation? I tried looking through substratum themes but the only ones I found are without the animation.
Saplaran said:
Quick Question since my device is encrypted. How do I remove the encryption when I have a phone which does not boot?
Much thanks for the ROM
Click to expand...
Click to collapse
You format your data, factory reset does not remove encryption, format data removes
This rom is the best ever Oreo for bacon. Loving it so much:good:
well well well, we have the Tuga Oreo stable now...
gr8 work mate..
downloading it now shall test and report back..
regards
Great to see this! @danieldmm is this compiled with 64 bit Binder APIs? I'd love to pair it to Thunder Kernel 3s for sultanized camera!
Sent from my A0001 using Tapatalk
The Rom is super fine, love new icon from Lineage. Perfect beauty, only thing missed is color control
It would be nice to have the brightness bar at the bottom, like in lineageOS
pippoaacc said:
Great to see this! @danieldmm is this compiled with 64 bit Binder APIs? I'd love to pair it to Thunder Kernel 3s for sultanized camera!
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
LineageOS changed quite long for 64-bit binder.
https://github.com/LineageOS/androi...on/blob/lineage-15.1/BoardConfigCommon.mk#L62
if you try let us know how it goes with kernel
Thanhtho96 said:
The Rom is super fine, love new icon from Lineage. Perfect beauty, only thing missed is color control
Click to expand...
Click to collapse
Color control will be implemented in future rom update.
Macmoc16 said:
It would be nice to have the brightness bar at the bottom, like in lineageOS
Click to expand...
Click to collapse
No idea what you are talking mate, brightness bar in this rom is stock LineageOS, never saw brightness bar on bottom over LineageOS.
Always a pleasure to see you in action, Daniel. Thank you so much for your dedication to the Bacon community!
edit: + updated my ROM index
Can't we install it with TWRP 3.1.0 ... m getting error : 7 while flashing the ROM ... help
gk4218 said:
Can't we install it with TWRP 3.1.0 ... m getting error : 7 while flashing the ROM ... help
Click to expand...
Click to collapse
Need more detail about the error, read all the letters and post what it says, usual prior to the error 7 letters it should have something written.
If you prefer take a screenshot and post here
Timmmmaaahh said:
Always a pleasure to see you in action, Daniel. Thank you so much for your dedication to the Bacon community!
edit: + updated my ROM index
Click to expand...
Click to collapse
Guess you just missed to make the post over that thread saying you updated the index
I also get an error - TWRP-3.1.1-5 TUGA-POWER. (Dirty flash rom - from/over 8.1.0r14 Agent_fabulos)
Stolen from @insomnixXx: (Sorry buddy, I'm a bit lazy ) I AM NOT THE DEVELOPER OF THIS ROM NOR A MEMBER OF MOKEE TEAM!!!
The purpose of this thread is to "spread the word" for this ROM so many more users can try it and also that they know this option exists too.I am not responsible for any damage you may deal to your device since this is just an "repost" of the ROM.If you don't know what you are doing then better don't do it. Or just follow the instructions lol
For bug reports please contact the MoKee team because it is useless, since nearly all MoKee Dev's are chinese and active on MoKee forum
I will DON'T update the thread or write a personal feedback after every rom update. Their changelog is accessable for everyone, please feel free to read that .
About
MoKee Open Source is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion…
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
ALL CREDITS TO MOKEE TEAM
Instructions:
Do a nandroid backup via TWRP (link below) (safety first)
Wipe Dalvik, Cache, System, Data via TWRP
Install MoKee ROM and GApps
If you want root, install Magisk for example...
Reboot into system (first boot will take ~5 minutes!)
ENJOY
Downloads:
Download ROM: https://download.mokeedev.com/?device=zl1
Download GApps: https://opengapps.org
Download newest TWRP (important because of Vendor partition!): https://twrp.me/leeco/leecolepro3.html
Download Magisk: https://github.com/topjohnwu/Magisk/releases
Hit the thanks button if you like this post or comment if you don't. Any feedback is appreciated much .
Any experience?
drdagi said:
Any experience?
Click to expand...
Click to collapse
It's a very stable ROM but there is not extra functions like others rom.
May be in another version.
drdagi said:
Any experience?
Click to expand...
Click to collapse
Excellent battery life (drained only 4-5% while recover 102 apps via Titanium Backup, normal drain is 10% for me), but its like a Pixel ROM ( @Lethalben already said it);
There are no features, just a clean rom.
drdagi said:
Any experience?
Click to expand...
Click to collapse
很稳定。每天更新。在
faraway59651634 said:
很稳定。每天更新。在
Click to expand...
Click to collapse
Please write in english or use google translator
Excellent work
Everything works like a thousand wondersthe, battery seems to hold much more, My phone now is like it's from another planet much faster. My phone is: X722, Very important is to install twrp-3.2.3-1-zl1.img
or higher but no ( zl0 ), must be (zl1) .
IR included?
Sony make.belive said:
Please write in english or use google translator
Click to expand...
Click to collapse
ok
slawektj said:
Everything works like a thousand wondersthe, battery seems to hold much more, My phone now is like it's from another planet much faster. My phone is: X722, Very important is to install twrp-3.2.3-1-zl1.img
or higher but no ( zl0 ), must be (zl1) .
Click to expand...
Click to collapse
i have x722 i use twrp 3.2.3-1 zI0, without problems, i use zI1 ???
panos196 said:
i have x722 i use twrp 3.2.3-1 zI0, without problems, i use zI1 ???
Click to expand...
Click to collapse
For my X722 it worked me flash this TWRD (twrp-3.2.3-1-zl1.img) and I have not had any problems, but with this TWRD (twrp-3.2.3-1-zl0.img) I could not install the rom.
Awesome rom, smoother experience, greater battery experience.
Missing: IR remote app, play store IR apps support and need little more customization.
Thanks a million for this rom.
---------- Post added at 09:00 PM ---------- Previous post was at 08:55 PM ----------
TechDriver said:
IR included?
Click to expand...
Click to collapse
Not yet,
Did they include IR in the oreo version?
wilq5 said:
Did they include IR in the oreo version?
Click to expand...
Click to collapse
May be in future.
I have been using this rom since 5 days I didn't face any issue. Lock unlock is smooth without any issue.
Only need IR support and some additional features.
Great rom.
Any one know, for Incremental update which recovery need to be installed?
bppjenil said:
Any one know, for Incremental update which recovery need to be installed?
Click to expand...
Click to collapse
TWRP is necessary. But for incremental updates you need to donate a minimum of 5$ to them.
This is an one-and-only activation cost.
Otherwise you need to flash the whole rom for an update
Sony make.belive said:
TWRP is necessary. But for incremental updates you need to donate a minimum of 5$ to them.
This is an one-and-only activation cost.
Otherwise you need to flash the whole rom for an update
Click to expand...
Click to collapse
Thank you,
I paid and I'm on Incremental update, but aftrer install goes to recovery and doesn't reboot. Force to reboot but does not reboot.
But if i download full rom, after apply udate automatically reboot and works.
Any suggestions?
This rom doesn't give issues yet. Smooth.
Missing of IR remote.
bppjenil said:
Thank you,
I paid and I'm on Incremental update, but aftrer install goes to recovery and doesn't reboot. Force to reboot but does not reboot.
But if i download full rom, after apply udate automatically reboot and works.
Any suggestions?
This rom doesn't give issues yet. Smooth.
Missing of IR remote.
Click to expand...
Click to collapse
Maybe it wont work because its a nightly rom.. Please read the full description on their home page, what difference there are for editions
Great work but i have a few bugs:
- I use two sim card and when i setup data on second it keep reverting on first (after reboot or similar).
- On bank app when unlock with FP i get "Token is not unlocked"
This bugs was ok on old android 8 Mokee - phone is X722.
maybe someone knows why all on lineage based and aosp based roms that i install on ZL1 i have wrong battery information? i mean - it can show 20% and then i restart and it shows 70%, and then i restart again and it shows 30%.
it happens on all roms i tried of oreo and pie (lineage, mokee, RR, AEX), and only on zl1 (x720). when i install the same rom on zl0 (x722) i don't have this problem. when i install custom EUI rom i also don't have this problem, but then when i install lineage/mokee/RR again i have this problem again.
---------- Post added at 03:43 PM ---------- Previous post was at 03:16 PM ----------
maybe someone knows why all on lineage based and aosp based roms that i install on ZL1 i have wrong battery information? i mean - it can show 20% and then i restart and it shows 70%, and then i restart again and it shows 30%.
it happens on all roms i tried of oreo and pie (lineage, mokee, RR, AEX), and only on zl1 (x720). when i install the same rom on zl0 (x722) i don't have this problem. when i install custom EUI rom i also don't have this problem, but then when i install lineage/mokee/RR again i have this problem again.
This is ViperOS
Disclaimer:
We are not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
"This is a user friendly thread. All feature requests will be heard and considered. I am not against anything that doesn't stray too far away from the original idea of the ROM! Helping one another is also encouraged! Please be respectful and you will always be treated the same way, we are all here for a good experience."
About:
We are a Brazilian team, ViperOS aims to bring stability and useful features. If you are looking for a stable ROM with true tested features, minimal bugs and no Lineage bloatwares, then this is the place to be.
Features:
Download: https://drive.google.com/file/d/1KaOlzBLZGRWQu24Bt80sgWiMvAKUjJXP/view?usp=drivesdk
Credits & Thanks:
Other links
Telegram channel
Telegram chat discussion
ROM source
This is my second port i REALLY hope you like it
BUGS: NFC (like all oreo ROMs) and hotspot
HOW TO USE HOTSPOT?
Use PdaNet app that i included in the ROM
HOW TO ENABLE NAVBAR?
Use Soft Buttons app included in the ROM or this Magisk Module: https://forum.xda-developers.com/mi-a1/how-to/navbar-enabler-lineageos-magisk-module-t3759802
REALLY IMPORTANT!!!
The setup wizard is laggy but then the ROM becomes smooth and responsive :good:
XDA:DevDB Information
ViperOS 5.1 Port, ROM for the Samsung Galaxy J5
Contributors
Francisco Funes, EsromTech
Source Code: [url]https://github.com/galaxy-msm8916[/URL]
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: No requirements
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: v3
Stable Release Date: 2019-02-22
Beta Release Date: 2019-02-02
Created 2019-02-27
Last Updated 2019-02-27
I hope you like it guys Can anyone help me to fully fix hotspot?
Sent from my j5xnlte using XDA Labs
Screenshots:
Some screenshots failed to upload :'(
buenísima. viva nuestro nuevo dev nuevo dev nuevo dev :v
Another very nice port from our newest developer.Fully tested and can confirm both sim cards working and audio on both.Wifi and bluetooth great and hotspot works with additional app as stated in thread.Rom has no lag whatsoever fast and smooth at loading apps.This rom has better ram memory usage than any I have tested with 29% memory usage quite remarkable and the lowest memory usage I have seen on the J5 2016.Another great addition to the J5 roms .Great work and great to see all these new roms.:
Finsnevis said:
Another very nice port from our newest developer.Fully tested and can confirm both sim cards working and audio on both.Wifi and bluetooth great and hotspot works with additional app as stated in thread.Rom has no lag whatsoever fast and smooth at loading apps.This rom has better ram memory usage than any I have tested with 29% memory usage quite remarkable and the lowest memory usage I have seen on the J5 2016.Another great addition to the J5 roms .Great work and great to see all these new roms.:
Click to expand...
Click to collapse
Thank you so much!
Funciona no j5 metal j510mn? Atualmente eu uso o ViperOS 7.1 e queria atualizar para o oreo e gostaria de saber se essa rom e suportada no j5 metal igual a ViperOS 7.1
Phemtpon said:
Funciona no j5 metal j510mn? Atualmente eu uso o ViperOS 7.1 e queria atualizar para o oreo e gostaria de saber se essa rom e suportada no j5 metal igual a ViperOS 7.1
Click to expand...
Click to collapse
I'm a J510MN user, it will work fine, and please use english here (because of XDA rules)
Sent from my j5xnlte using XDA Labs
Francisco Funes said:
I'm a J510MN user, it will work fine, and please use english here (because of XDA rules)
Sent from my j5xnlte using XDA Labs
Click to expand...
Click to collapse
Sry ty
---------- Post added at 04:44 PM ---------- Previous post was at 04:03 PM ----------
ive installed here on j510mn and its working fine at least it booted. smth i noticed is the screen, didnt fit all the screen and looks like some edges around the screen y know? idk if that is normal or is a bug but the screen is not fitting all the display.
sry for bad inglishki
---------- Post added at 05:09 PM ---------- Previous post was at 04:44 PM ----------
im having some problems installing gapps cuz googleplay services keeps stopping, i tried to install arm nano and micro and noone worked i keep getting this error pls help
Edit: i made it work again by doing this https://forum.xda-developers.com/oneplus-2/help/8-1-google-play-services-stopping-t3765800
Phemtpon said:
Sry ty
---------- Post added at 04:44 PM ---------- Previous post was at 04:03 PM ----------
ive installed here on j510mn and its working fine at least it booted. smth i noticed is the screen, didnt fit all the screen and looks like some edges around the screen y know? idk if that is normal or is a bug but the screen is not fitting all the display.
sry for bad inglishki
---------- Post added at 05:09 PM ---------- Previous post was at 04:44 PM ----------
im having some problems installing gapps cuz googleplay services keeps stopping, i tried to install arm nano and micro and noone worked i keep getting this error pls help
Edit: i made it work again by doing this https://forum.xda-developers.com/oneplus-2/help/8-1-google-play-services-stopping-t3765800
Click to expand...
Click to collapse
You can disable rounded corners in settings, thank you for using my ROM! :highfive:
Is this rom good for games like mobile legends?
dabest55 said:
Is this rom good for games like mobile legends?
Click to expand...
Click to collapse
Yes, but you should flash OC hotplug for lineageOS 15.1 and know how to use PDAnet app if you want to use hotspot
Sent from my j5xnlte using XDA Labs
Issue during setup
Facing issue during setup.
During initial setup i selected Language, default sim, Connected to wifi. Then when i clicked start as fresh, screen turned black with only wifi, sim signal and battery icon. I tried again and again without any luck. I flashed gapps arm v8.1 stock together with firmware. Is it the right version i should use?
min2m said:
Facing issue during setup.
During initial setup i selected Language, default sim, Connected to wifi. Then when i clicked start as fresh, screen turned black with only wifi, sim signal and battery icon. I tried again and again without any luck. I flashed gapps arm v8.1 stock together with firmware. Is it the right version i should use?
Click to expand...
Click to collapse
The setup wizard is laggy, i suggest you to do it quickly, and i suggest to use the pie version wich is more updated
Sent from my j5xnlte using XDA Labs
Francisco Funes said:
The setup wizard is laggy, i suggest you to do it quickly, and i suggest to use the pie version wich is more updated
Sent from my j5xnlte using XDA Labs
Click to expand...
Click to collapse
Actually it was not the laggy setup. I was surprised to see that the Gapps version 8.1 (latest) didn't install chrome or any browser. So i digged in to find the issue. I was able to skip the wifi configuration step and bypass the google sign in. Then i installed android system web view latest version from apkmirror. There was a new version available which was far ahead of the version installed by gapps or from the firmware. Then i started google sign in and that worked perfectly. So if someone is having issues like this then its better to skip google signin by not configuring the wifi and update android system webview to solve the issue. I hope gapps or developer will update their package soon.