I'm using Kenzo.
I unlocked bootloader unofficially
installed latest TWRP
Flashed N Firmware from https://forum.xda-developers.com/red...-kate-t3507789
Tried Flashing RR Oreo, Firehound, Lineage 14.1, Omni 7.1, facing bootloops with all of them.
Although It boots without any problems on Lineage 13.0.
Thanks, Any help is appreciated.
Your firmware link ends in 404 page.
So don't know what firmware your using, there is no such thing as N firmware for the device.
As MIUI never released Nougat rom for the device.
Edit: - A google search showed me out of date CM firmware.
Get official firmware from this thread: -
https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
corkiejp said:
Your firmware link ends in 404 page.
So don't know what firmware your using, there is no such thing as N firmware for the device.
As MIUI never released Nougat rom for the device.
Edit: - A google search showed me out of date CM firmware.
Get official firmware from this thread: -
https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
Click to expand...
Click to collapse
Thanks.
I tried with 8.2.8 and 9.2.4 firmware from your link, but still no luck.
With Oreo rooms after it's done with boot animation, goes straight to TWRP.
Btw this is the N firmware I talked about.
https://www.google.ca/amp/s/forum.x...14-1-aosp-n-firmware-kenzo-kate-t3507789/amp/
sanjayatlive said:
Thanks.
I tried with 8.2.8 and 9.2.4 firmware from your link, but still no luck.
With Oreo rooms after it's done with boot animation, goes straight to TWRP.
Btw this is the N firmware I talked about.
https://www.google.ca/amp/s/forum.x...14-1-aosp-n-firmware-kenzo-kate-t3507789/amp/
Click to expand...
Click to collapse
Did you also use an Oreo Compatible TWRP, check your rom pages for which TWRP and Firmware required.
A flash of latest MIUI Original fastboot rom in EDL mode maybe required to get your device upto date.
Your firmware linked is definitely way out of date version. (12.04.2017).
Is your bootloader unlock officialy, if yes then flash the version with includes emmc_appsboot.mbn
Related
Hi Devs,
I have tried to unlock bootloader [SD] by Mi Official method but got no success. :crying:
Always stuck at 50%.
I am wondering if the BL is unlocked via an unofficial way then can I flash AOSP based roms right away.
If yes, kindly suggest a way to unlock BL because I came across with so many threads each is somewhat different.
I have changed MIUI roms to try my luck say global -> global beta -> (soft brick) -> china beta.
Got confused, currently I am on China Dev Rom.
My Understanding till now ---
1. Unlock BL
2. FLash TWRP
3. Wipe All
4. Flash CM firmware -> Flash AOSP rom
5. Success...:silly:
Kindly guide if anyone had done this before.
i was having something similar to you.
i wanted to flash cyanogen roms but i didnt waited until i get the unlocker code from xiaomi.
i followed this tutorial
https://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
it makes you flash a dev/beta global miui rom (i suggest you 6.9.29) with a custom recovery (you delete the stock recovery and replace it with a custom one like aika recovery or zcx recovery). then use the app miflash (latest version support windows 32 &64 bit, olders ones only 64 bit) to flash the entire miui rom.
When you finished you will have a miui rom with custom twrp. Then you boot to recovery (dont let the phone boot to system) and twrp will overwrite stock recovery) then you reboot to system and there you go. You will have miui and a fully working custom recovery (there you can flash supersu, cyanogen roms, xposed, and every other zip you want)
BraianV said:
i was having something similar to you.
i wanted to flash cyanogen roms but i didnt waited until i get the unlocker code from xiaomi.
i followed this tutorial
https://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
it makes you flash a dev/beta global miui rom (i suggest you 6.9.29) with a custom recovery (you delete the stock recovery and replace it with a custom one like aika recovery or zcx recovery). then use the app miflash (latest version support windows 32 &64 bit, olders ones only 64 bit) to flash the entire miui rom.
When you finished you will have a miui rom with custom twrp. Then you boot to recovery (dont let the phone boot to system) and twrp will overwrite stock recovery) then you reboot to system and there you go. You will have miui and a fully working custom recovery (there you can flash supersu, cyanogen roms, xposed, and every other zip you want)
Click to expand...
Click to collapse
I have gone through full thread. https://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
For some it works, but no one has widely used it to flash custom kernal or rom. All again stayed on MiUI.
It seems that nobody is quite clear about how this stuff works because members have asked questions like
How would official TWRP boot on locked BL
Working of Custom kernals
Modified BLs
I am planning to flash Unofficial LineageOS 7.1.1 or RR.
kindly confirm If you did this on Kenzo itself with some custom kernal and rom.
anurag86 said:
I have gone through full thread. https://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
For some it works, but no one has widely used it to flash custom kernal or rom. All again stayed on MiUI.
It seems that nobody is quite clear about how this stuff works because members have asked questions like
How would official TWRP boot on locked BL
Working of Custom kernals
Modified BLs
I am planning to flash Unofficial LineageOS 7.1.1 or RR.
kindly confirm If you did this on Kenzo itself with some custom kernal and rom.
Click to expand...
Click to collapse
I did. After i flashed dev 6.9.29 miui rom with zxc twrp i flashed rr 5.8.0 (Android 7.1) with cm14 firmware, gapps and custom kernel (radon 3.5).
Not a single problem. Try it
---------- Post added at 07:54 PM ---------- Previous post was at 07:52 PM ----------
anurag86 said:
I have gone through full thread. https://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
For some it works, but no one has widely used it to flash custom kernal or rom. All again stayed on MiUI.
It seems that nobody is quite clear about how this stuff works because members have asked questions like
How would official TWRP boot on locked BL
Working of Custom kernals
Modified BLs
I am planning to flash Unofficial LineageOS 7.1.1 or RR.
kindly confirm If you did this on Kenzo itself with some custom kernal and rom.
Click to expand...
Click to collapse
I did it with Kate. The only difference is that i change "cm14 firmware" to put Kate módem (original cm14 firmware has kenzo modem).
You are missing drivers on PC thats why you are getting 50% error... Sign in i.mi and locate...install MiFlash on PC 64bit, win7+, if you are on china dev ->turn on usb debbugging-> boot in fastboot mode,use original cable run MiUnlock and unlock, it will work 100%. I have unlocked BL so many times on different computers...and it always worked...if done all right
Denis:) said:
You are missing drivers on PC thats why you are getting 50% error... Sign in i.mi and locate...install MiFlash on PC 64bit, win7+, if you are on china dev ->turn on usb debbugging-> boot in fastboot mode,use original cable run MiUnlock and unlock, it will work 100%. I have unlocked BL so many times on different computers...and it always worked...if done all right
Click to expand...
Click to collapse
Hi Denis, I have installed MIPcSuite. I think it contains all drivers for our device.
Further drivers from MIFlash tool are also present in my PC.
If you have a specific version kindly tell me.
Say ver of - MiFlash , China Dev or Global Dev , MiUnlock.
off course I am using Mi Cable shipped with device.
@BraianV - I have flashed Lineage. Votle Issues. :good:Hitted Thanks for help.
Hi people,
I downloaded few week ago the Cyanogenmod 14.1 (cm-14.1-20161225-NIGHTLY-kenzo) and I see that a linage version was release also (lineage-14.1-20170207-nightly-kenzo-signed.zip) So which one to choose ?
reassure me, both are coming without gapps ?
Did I should flash this firmware before ? https://forum.xda-developers.com/redmi-note-3/how-to/cm14-14-1-aosp-n-firmware-kenzo-kate-t3507789
Thank you.
LOS. CM is "dead".
Neither come with Google apps so you'll need to flash them if you want them.
You don't need to flash firmware if you're coming from the latest MIUI. It doesn't harm anything if you do though.
Thank you @theoneofgod :good:
did you have a page how describe how to install the liange os Trough TWRP ZCX ?
Thank's
You can flash TWRP using this method, it won't require you to unlock the bootloader either.
https://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
From there, flash LOS.
Hello, i just got a honor 5x, non-rooted, bootloader locked, its running KIW-UL00C00B437, so its the chinesse version, i want to install lineage on it, reading the forums i found out that i need to downgrade the version to have a stock rom without Volte to avoid bootloops, but i cant find a method or the firmware to do it, this is my first huawei phone, so im a little lost, somebody can help me?
lineu94 said:
Hello, i just got a honor 5x, non-rooted, bootloader locked, its running KIW-UL00C00B437, so its the chinesse version, i want to install lineage on it, reading the forums i found out that i need to downgrade the version to have a stock rom without Volte to avoid bootloops, but i cant find a method or the firmware to do it, this is my first huawei phone, so im a little lost, somebody can help me?
Click to expand...
Click to collapse
In official website of honor ,u can find non -volte firmware , download it ,extract it ,place the update.zip in home dictectory...der is a instructions guide in firmware zip ...follow it accordingly ...after that flash twrp using any recovery flashing app like flashify ....or use twrp official app ...then flash lineage os with gapps
Bharath kumar 007 said:
In official website of honor ,u can find non -volte firmware , download it ,extract it ,place the update.zip in home dictectory...der is a instructions guide in firmware zip ...follow it accordingly ...after that flash twrp using any recovery flashing app like flashify ....or use twrp official app ...then flash lineage os with gapps
Click to expand...
Click to collapse
I can only find firmware for other version I had tried many websites.
Could u provide the link pls?
lineu94 said:
I can only find firmware for other version I had tried many websites.
Could u provide the link pls?
Click to expand...
Click to collapse
Basically ,I live in India ......I don't know about Chinese version ...
x722 QFIL is now available for hard bricks. See x722 Development Forum or scroll down for the link.
Although this thread is stickied in the Question & Answers sub-forum, I see that people are still ending up with bricked phones because they only visit this section of the forum. Let's hope this thread puts an end to accidental bricks once and for all (and let's hope that the future brings a solution to these bricked x722s).
Don't worry; custom 26s ROMs are fine to flash through TWRP. Vendor ROMs are fine to flash through TWRP.
Just don't flash the first stock 26s ROM you find online. Like the 26s ROM from Needrom, or a 26s ROM from a Chinese forum.
WARNING! There was a report that @STEVE_MARS's Genesys 26s ROM bricked a phone. See this post for reference. I urge you to stay away from that ROM and other eUI 26s based ROMs. You never know if your device will get bricked
Below lies the same info as is in the Q&A forum sticky.
Planning on flashing a custom ROM on your LeEco Pro3 Elite x722? Planning on flashing TWRP on your LeEco Pro3 Elite x722?
READ THIS ENTIRE POST FIRST, or you may accidentally brick your device
DO NOT flash official/stock 26s through TWRP.
DO NOT UPDATE TO official/stock 26s if you want to flash TWRP on your x722.
Your x722 will get permanently bricked if you install stock 26s (or firmware WIXCNFN5802005041S) through TWRP. That's because stock 26s permanently locks down the bootloader. At that point, only fastboot is available. Do not attempt this or you will end up with a permanently bricked device.
EDIT: As of September 24, 2018, @F.J.V has posted the x722's QFIL. Hooray! https://forum.xda-developers.com/le...ides-development--and-mods/qfil-x722-t3846553
HELP! I'm on 26s! I received my x722 and it's stuck on 26s! HOW DO I GET RID OF IT?
That's simple. If your x722 is on stock 26s, you only need to flash Batyan's 01D developer ROM (20s) through the stock LeEco recovery. Click for the download and instructions. Follow the instructions and you will be able to safely unlock the bootloader and flash TWRP.
However, most x722s are on vendor ROMs. If your phone is on a 26s vendor ROM, it's safe to flash. Look at the chart below to figure out if you've got stock 26s or vendor 26s. If you're not sure about what you have, post here and we'll try to help. If you don't want to take any chances, you can always downgrade to 01D first.
@dakok has created a handy chart for the different vendor ROMs here.
I just got my x722 today and I want to unlock the bootloader, root it, and flash TWRP. How do I do that?
Here you go: [GUIDE][X722] Unlock Bootloader + TWRP + ROOT
What ROMs are available for the x722? Will x720 ROMs work on the x722?
Some x720 ROMs are indeed compatible with the x722, but need to be ported to the x722, therefore not all x720 ROMs work on the x722. If the ROM is not specifically for your device (i.e. labelled as being for the x722), don't flash it. For example, MIUI is not available for the x722 because no one has ported it from the x720 to the x722. If you flash, say, MIUI 9 for LEX720 on your x722, you'll end up with a soft brick, most likely.
Remember to make a Nandroid backup of your eUI ROM before flashing any other ROM!
Downgrading to the 01D ROM won't harm your phone in any way, but this ROM's performance isn't the best compared to normal 20s or 26s vendor (shop) ROMs. It's a developer's ROM, after all. So if you ever want to return to eUI, you'll want to make a backup of your vendor/shop eUI ROM via Nandroid if you're sick of custom ROMs for whatever reason.
I want to go back to eUI from a custom ROM. What should I do?
If you want to return to the 01D 20s ROM, you have to flash it through the stock LeEco recovery, NOT TWRP! Do not attempt to flash the .bat file from this package or the update.zip from this package via TWRP or you might screw up your device royally. If you absolutely need to go back to this ROM for whatever reason, you need to flash the stock recovery first through fastboot.
I recommend you follow my advice and make a Nandroid backup of your 20s vendor/shop eUI ROM or the 01D ROM (if you had to downgrade because you were on a stock LeEco ROM) before flashing anything else on your device. Guys, it's basic XDA knowledge to make a Nandroid backup of stock software before attempting anything... c'mon now.
Feel free to correct/add to this thread as you see fit. Thanks.
EDIT: Here's a link to all the LeEco Pro3 x720 and x722 files I've collected so far. Uploaded them in case you're not able to download the original files.
WARNING: File size is 15 GB!! https://mega.nz/#!EAN30agB!0miPxwX8uxr-g2oetHB1X09KyPh-y1tq8gcJvDd9X0o (compressed 23 gigs)
Included files:
Batyan 01D (170720-乐视X722-5.8.020S-6.0-纯净) - 01D Developer ROM for x722
FlashOne2.0
le_zl1_qfil_ufs (NOT FOR USE WITH zl0, AKA X722!!!) - if your x722 is bricked, you risk making the brick worse by using these files to resurrect your device. You have been warned.
UNLOCK_RECOVERY_FASTBOOT_TOOL_zl0_LEX722
x722 Stock LeEco Recovery (DO NOT FLASH UNLESS YOU KNOW EXACTLY WHAT YOU'RE DOING)
乐视 pro3 x720 x722 x728 fast模式一键救砖
乐视_X722_救砖包
乐视Pro3（乐视X720 X722 X728）
camera_2api_tora33
Outdated files: You can use normal Magisk instead of these
X722_stable_20s_MagiskRoot_v4A_C.B.G_tora33
X722_stable_20s_NoRoot_tora33
Thank you for this info!
I just received my LEX722 today, but it's on Android 6.0.1 with 1 August Security Patch (EUI 5.8.020S build WIXCNFN5802001232S release-keys). And I don't see any option to check updates.
I'm on a Shop ROM? If yes, how I can find and install/update to latest Global ROM without any brick?
And what's the latest version available of Official ROM?
Sorry for many questions, I do not know anything about the device.
kryzeK said:
Thank you for this info!
I just received my LEX722 today, but it's on Android 6.0.1 with 1 August Security Patch (EUI 5.8.020S build WIXCNFN5802001232S release-keys). And I don't see any option to check updates.
I'm on a Shop ROM? If yes, how I can find and install/update to latest Global ROM without any brick?
And what's the latest version available of Official ROM?
Sorry for many questions, I do not know anything about the device.
Click to expand...
Click to collapse
Hi.
I guess i got the same rom as you on my LEX722, and there isn't any OTA checker. I recommend you to flash a custom rom if you want, or, flash modded Genesys 26S which has modded kernel so it won't lock up your bootloader.
D1stRU3T0R said:
Hi.
I guess i got the same rom as you on my LEX722, and there isn't any OTA checker. I recommend you to flash a custom rom if you want, or, flash modded Genesys 26S which has modded kernel so it won't lock up your bootloader.
Click to expand...
Click to collapse
Got it, thank you so much! I will install Genesys 26S to enjoy the Official ROM a bit. Just for an info, what is the best Custom ROM in stability? LOS 15.1?
kryzeK said:
Got it, thank you so much! I will install Genesys 26S to enjoy the Official ROM a bit. Just for an info, what is the best Custom ROM in stability? LOS 15.1?
Click to expand...
Click to collapse
For me, aicp.
kryzeK said:
Thank you for this info!
I just received my LEX722 today, but it's on Android 6.0.1 with 1 August Security Patch (EUI 5.8.020S build WIXCNFN5802001232S release-keys). And I don't see any option to check updates.
I'm on a Shop ROM? If yes, how I can find and install/update to latest Global ROM without any brick?
And what's the latest version available of Official ROM?
Sorry for many questions, I do not know anything about the device.
Click to expand...
Click to collapse
Ok, let me quickly explain.
You are on a vendor rom, but any "20s" is a good rom (EUI 5.8.020S even if the build is different)
Although there is another "official" rom, YOU SHOULD NOT INSTALL IT, because then you won't be able to unlock bootloader and if you do that, you simply cannot modify your phone any more.
I highly recommend that you make a nandroid backup or a twrp backup (and if you can, provide it to me, because I need it).
LeEco is not making anymore phones, so you won't have any more official updates, so you won't have any nougat neither oreo unless you flash a custom rom. The only rom provided here is a developer rom that has a "vendor patch", but it's not exactly an original stock/vendor rom.
How can i install the stock 26s? i'm on custom 8.1
I have the stock 26S (WIXCNFN5902607031S) that came with the phone. I checked and the bootloader is unlocked. Can I flash the twrp and the Pixel Experience?
bricsi8 said:
I have the stock 26S (WIXCNFN5902607031S) that came with the phone. I checked and the bootloader is unlocked. Can I flash the twrp and the Pixel Experience?
Click to expand...
Click to collapse
Unlocked bootloader? Than i guess you are good to go.
Hard brick nightmare is over now.
Thanks to F.J.V!
https://forum.xda-developers.com/le...ides-development--and-mods/qfil-x722-t3846553
Hi Guys, I need help with my LeEco x722. Can't recovery. it restarts again again
i also have an bricked LEX 3 Pro . i bought it as an X722 but iam not shure . could also be an X720. i can not find the difference.
so Phone has only fastboot.
when i plug in usb cable it just reboot every 10 sec . no charging screen appears
i flash Qfil, but not helped it stay the same
i flashed recovery stock722 then twrp for zl0, zl1 nothing will boot up recovery.
i changed Battery, but its same restart every 10 sec
i have no more ideas
marcash said:
i also have an bricked LEX 3 Pro . i bought it as an X722 but iam not shure . could also be an X720. i can not find the difference.
so Phone has only fastboot.
when i plug in usb cable it just reboot every 10 sec . no charging screen appears
i flash Qfil, but not helped it stay the same
i flashed recovery stock722 then twrp for zl0, zl1 nothing will boot up recovery.
i changed Battery, but its same restart every 10 sec
i have no more ideas
Click to expand...
Click to collapse
Hi, this happened also to me after installing @CrisBalGreece ROM. Now, I can enter only in fastboot. I connot enter in TWRP since the phone freeze and restart. Qfill cannot solve the problem.
Did you find a solution?
Thanks
I did a factory reset and upon trying to install LOS 16 im hit with the message "ERROR: This package requires firmware from MIUI 9.1.17 developer build or newer. Please upgrade firmware and retry!"
Im on latest 10.2.2 so I have no clue why im getting this error. Same is happening when I try to install Pixel Experience rom.
I installed the latest MIUI rom from the site, boots up fine. But when I flash TWRP and try installing these roms, Im getting that error.
oh god im retarded I now see "developer firmware"
fixed
oh god im retarded I now see "developer firmware"
fixed
can you give me link to download
Shzamm said:
can you give me link to download
Click to expand...
Click to collapse
https://downloads.akhilnarang.me/MIUI/beryllium/
LeL
idab710 said:
I did a factory reset and upon trying to install LOS 16 im hit with the message "ERROR: This package requires firmware from MIUI 9.1.17 developer build or newer. Please upgrade firmware and retry!"
Im on latest 10.2.2 so I have no clue why im getting this error. Same is happening when I try to install Pixel Experience rom.
I installed the latest MIUI rom from the site, boots up fine. But when I flash TWRP and try installing these roms, Im getting that error.
Click to expand...
Click to collapse
Even I am getting same error. Trying to install pixel experience rom on Redmi note 7 pro. It says firmware required MIUI 10.2.8.0 or above while I am on latest MIUI 10.3.7. What should I do?
Install latest vendor.
Damn, I forgot a/b installing the vendor firmware. Fixed my own problem
In my case I had followed the Pixel Experience tutorial but was getting the error EVEN THOUGH I had installed the vendor zip file. Turns out I did not read carefully enough. It required 12.0.2.0 but I had downloaded and flashed 12.0.1.0 because the pixel experience guide has an OUTDATED link.
FYI future googlers: make sure you read that line at least twice.