Dear XDA Community,
I have recently bought myself chuwi Hi10 per and now have some problems and hopes that you can help me. After I have uninstalled a virus scanner (on Windows), I have found out that a Systemdriver is absent. I have tried immediately new Windows 10 per version has to instal then, however, most hardware no more can be of use and could also ascertain no unknown devices in the device manager, therefore I could also postinstall no drivers. Besides, moreover, version was installed for some reasons only the Home by Windows. Moreover, by the installation all partitions were formatted therefore I also have no more Android. At the moment I have installed PhoenixOS, has there, however, no access to my USB connection. Whenever I in developer options the fashion USB to MTP change the settings fall. I would have installed with pleasure Windows and RemixOS or the normal Android that preloaded it was again on my device. I hope that you can help me.
P. S if in this text a lot of grammar or other mistakes are if I liked to apologise because I am, actually, a German and have translated whole by PONS
Dear German.
Little Friend. Learn some English. Most Swedes from my generation, 1963 to 1975, were taught Eng, Ger and Fre in school....
Related
Dear All,
after having tested the various WM6 solutions provided by Erofich (who did a great job, chapeau!), I lastly decided to revert to the original WM5 OS, since I prefer to operate my StarTrek mobile in my mother tongue, which is German.
However, what I would like to have anyway, is the current version of Office Mobile, since DocumentsToGo has still problems with the docx-files from Word, even if its vendors are praising their product as being "100% compatible" with MS Office 2007 - nothing but wishful thinking.
For these reasons, I would like to have Office Mobile, since, even if it may suffer from various limitations, it is at least compatible with files created by means of the desktop version of MS Office.
I have started several attempts to install Office Mobile 6.1 on my StarTrek, and I lastly succeeded, but, when I try to run e.g. Word Mobile, I get an error message, which reads like this: "cannot find pword.exe; make sure that all necessary libraries are present."
Needless to say that pword.exe is on the right place and that the relevant values (e.g. paths) in the registry appear to be ok.
I have also installed .net on my mobile, which took me more that 90% of the remaining free memory (what a horror!), but it didn't help either.
So, if somebody has a suggestion - all comments are welcome!
Thanks in advance,
The Wolf
You can try this...
Well, the problem I had before was I used the upgrade .msi files which naturally required the original version or version 6. I then downloaded a .cab file which showed the error that you had. This is what I did, before, when I was still using WM5. I installed the 6.1 version which had support for docx, as sed I had the same problem that you did, then I installed the .msi upgrade version. What it did was it repaired my previous installation.
I hope this helps you. It worked for me. Good luck.
You can try this...
I'm sorry if I can't upload the files, it seems that I may have lost it...
Hi Pampooh,
I was able to successfully repeat this under WM6 - here, it works indeed.
But I still fail to get Office 6.1 onto my StarTrek under WM5.
Thanks a lot anyway.
The Wolf
Let's pretend I'm new to windows mobile. (I am). Can anyone tell me HOW I get to these HKEY directories that everything is edited in. If anyone could give me a step-by-step instruction on how to install or modify anything at all in the phone, I would greatly appreciate it.
Please start the steps right after the 'Turn on phone' step, as I am fairly confident I have that under control. Every time I've asked this question on other forums I just get links to different forums with no helpful information below a certain level of expertise. I have never coded or done anything other than drag and drop folders, etc so a dumbed down version of how to start and I can learn from there. Anything! PLEASE!!! I hate having this amazing machine and not being able to utilize it.
oh, Touch Pro, sprint
First you need to install a registry editor. The two most used are PHM (free http://www.phm.lu/Products/PocketPC/RegEdit/) or Resco Explorer (paid http://www.resco.net/pocketpc/explorer/). I prefer Resco, but everyone has their own pref.
And installation, you fire it up and simply navigate it to your registry. Pretty straightforward.
I downloaded the free one but it isn't showing up in my phone. I navigated to its folder on my pc and everything seems to be zipped. when I unzip the file extensions are *.001 and I can't open or access them. am I doing something wrong ?
also, if anyone can explain to me how to install .net framework ?
warrenmrogers said:
also, if anyone can explain to me how to install .net framework ?
Click to expand...
Click to collapse
i assume you need the new 3.5 .net compact framework.
http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
You simply download and install the file on your computer (not your mobile device). This file will install the framework on your computer and will activate the add/remove programs on the sync center, so the next time you connect your touch pro it will ask to install the program. Then you just follow any instructions displayed on your touch pro for final installation and you're set to go!
here's on .Net http://www.fuzemobility.com/?p=470
It has an extra app to choose a default .Net.
There's also a Tips and Tricks section and a walk through for TouchFlo3D at fuzemobility.com that you may want to try.
I can relate to this problem.
warrenmrogers said:
Let's pretend I'm new to windows mobile. (I am). Can anyone tell me HOW I get to these HKEY directories that everything is edited in. If anyone could give me a step-by-step instruction on how to install or modify anything at all in the phone, I would greatly appreciate it.
Please start the steps right after the 'Turn on phone' step, as I am fairly confident I have that under control. Every time I've asked this question on other forums I just get links to different forums with no helpful information below a certain level of expertise. I have never coded or done anything other than drag and drop folders, etc so a dumbed down version of how to start and I can learn from there. Anything! PLEASE!!! I hate having this amazing machine and not being able to utilize it.
oh, Touch Pro, sprint
Click to expand...
Click to collapse
I have a Alltel HTC Touch Pro. The software that came with it does not work with Vista. I googled active sync for Vista, I got links to Windows Mobile Device Center. I installed that onto my desktop. It syncs my phone to my desktop, but only shows my device memory and the storage card. I have installed downloaded and installed net.frame. When I downloaded Advanced Config Tool and draged and drop (also copied & pasted) into the device memory and tried to click the cab. file it only shows that it will go to the c: drive on my desktop. I do not see anything showing for the windows on my device. Hopefully someone can post some useful infomation about this. Yes I did use search, that lead me here. There are lots of complete noobs. Before we can add useful information for others. ( like showing off the really cool function of these new phones we have to be able to use them ourselves. Thanks for any help.
Here's some tips that might help you:
When plugging your Touch Pro into your PC via USB, you should be prompted on the Touch Pro whether you want to connect as "ActiveSync" or "Disk Drive". You should click "ActiveSync" for installing applications.
If you are using your desktop PC and download an application for your Touch Pro, it will typically be .exe or .cab. The .exe files are intended to run on your desktop PC first, and will then trigger an installation to your Touch Pro through ActiveSync (Windows XP) or Windows Mobile Device Center (Windows Vista).
If the file is a .cab, it is intended to run on your Touch Pro directly and will install the program. To move a .cab to your Touch Pro, you use the explore feature in ActiveSync (or similar feature in Mobile Device Center), and drag and drop. (Alternatively, you can download .cab files directly onto your phone from the source website using the Opera web browser). Once the .cab is on your Touch Pro, you use the file explorer program on your phone to naviagte to the file and then execute it.
When you install programs onto your TouchPro, a dialogue appears on the phone to walk you through the installation. To save your phone's shared memory, you can install programs to your memory card. Unfortunately, some applications work best when installed onto the phone versus installing them onto the memory card.
Hope that helps
Thank you very much for your reply. I'll give this another try. I had the Alltel HTV Touch Flo awhile back and was running XP on the desktop. If I remember correctly, I saw my device in the tree layout with the software running XP. I gave the Touch Flo to a family member and got a BlackBerry Curve. Wanted to go back to a windows platform for the versitilty of programs. I know everything has a learning curve to it. With lots of reading and study, trial and error, and help from generous people here. Noobs like myself can get a lot more use and enjoyment from their devices. Each new version that comes out is getting faster, more powerful, and has more features. Others see these things that we have and want one. It would be helpful if we could help them to see all the possibilities that are there. The I Phone gets a lot of attention with commercials and has opened up for new apps being developed. There are as many, if not more apps for widows. We just have to learn to implement them with our device. I know I did not start this thread, but others can see the original posters title and understand their, and my question. Thanks again to the reply, and to anyone else who comes up with more help for the noobs.
Hello everybody...
This Message I left on an other thread for someone who asked for experience in using this app on a wm 6+ system:
"Just tested pocket Radiologist v2 on a stock 6.5 system of the htc HD2 and ready to revive this thread by now!
1. ADOCE had to be installed - otherwise the executable of the the app ****s up the executing.
2. installation of adoce is a bit tricky ... switch the OS-language (wm5 or 6 or 6.5) to englisch (british) if you use a foreign system. finally restart & install ADOCE. no matter if you switch back to your native language after installation.
3. start pocket radiologist - works but...
4. on the thc hd2 the font/character size is wrong. the toolbar/list which should be docked on the bottom of the screen floats about the half of it. trying to switch the screen to landscape with bsb tools doesnt work. I'm very sorry for this now!
5. Tried WVGA Fix 4 already - the characters' still far too big..."
Anyone's got an idea how to fix this character a/o resolution-problem?
Hope someone can help in the end.
I'm using the palm version on the palm emulator, works ok. the images are not great
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
jsmccabe78 said:
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
Click to expand...
Click to collapse
I did only the install procedure as described. first adoce, second the needed module. i installed it on main memory. execution after installation in that order made me no pain. i didn't transfer anything at all.
hope someone can solve the problem with this software...
Install completed succesfully, but I have the same problem as ppcppcppc (TS), so I hope someone can give input about a possible solution??
Dear all,
As I write I have a Lenovo ET960 sitting on my desk, which is lying there for the last 2 weeks as I am unable to figure out how to change its menu language from Chinese to English. My uncle who was never able to use it gave it to me after all these years. It has WM2003SE (I think!), although I am sure the experts here will know all about it. I am very keen on fixing this issue, the trouble is I am novice in this area.
I have done some background research, but I still need some help from all you guys here. I have the the following requests.
1) I understand that there is no way to change the language of this phone as the OS is hard-coded in the Chinese ROM. One way is to hack this Chinese ROM and change it to English using a HEX-editor. An alternate way would be to use a third-party software to change the language, however I could not find one for WM2003. Once I hack the ROM and make the necessary changes, I should, in principle be able to install an upgrade to WM2003 (which I also do not have with me!).
To hack the Chinese ROM in ET960 and solve this issue I would need to know two things:
(a) Where to locate the ROM in this pocket PC using my desktop PC (via a USB cable connection)?
(b) I need a reference ET960 ROM (ET980 ROM may also work!) in English to compare the values to change accordingly.
(c) Finally, an upgrade to WM2003/WM2003SE (the firmware upgrade d/l link) and the upgrade method.
Now the trouble is I have never flashed a ROM before, so I need to know the steps. In addition I would also need to know the steps to the upgrade process.
I have managed to download the following softwares/tools which I think will help in the process, but I dont want to start the process until I get some feedback from you guys here.
(1)The lenovo.zip file _ftp: / / ftp.roverbook.com / RoverPC /Lenovo_ET960/
and the (2) ET960update.exe from gsmforum.ru, which can be used as an update tool for both Lenevo ET960 and ET980. I have also managed to download the upgrade instructions, but only in Chinese!. This is where my research ends. Now I request you guys to help me with the missing links to convert my ppc into English.
Thanks,
Jay
This Thai review (use Google Chrome and translate it to English) states the following:
Languages: Support English, Simplified Chinese, Tranditional Chinese Input but can not display Traditional Chinese character.
The screenshots also show the phone is using English. It might be as simple as changing the system language in your MUI settings (in the registry: HKLM>MUI and change SysLang to 1033 Dec/0409 Hex...HKCU>MUI and change CurLang to 1033 Dec/0409 Hex).
Hi rete, Thanks for the reply. I have never edited the registry in a pda. Is there a special tool that I have to use for editing the registry? The ET960 I have with me has a interface similar to this _http:/ / video.pomoho.com/ent/762870.
As everything is in Chinese, I am unable to make head or tail of anything. Please guide me if possible. Cheers, Jay
I am getting back to my ET960 issue after a gap. I really want to make this device (which has a great design) usable, for which I will need to convert the user interface to English.
Rete, I made the registry changes you suggested but nothing changed. So I will need to to find an alternate solution.
The ET960 has WM2003SE (ROM version: S603 051229 which is not WWE). It displays all the system folders as well as some of the installed applications UIs in English. But most of it is in Chinese.
I installed an English localization software (Paragon Inc, LEng for WM6) which translated my ET960s interface completely to English. But, the ActiveSync stopped working and the system folders could not be accessed after the installation of LEng. This tells me that if I can replace the *.mui files from CHS to ENG in the ROM, I will get an English interface.
But the trouble is that I am new to all this and do not know where to start. So I request for some guidance.
The other option to make the device usable is to boot Android from a microSD card, but I could not find an Android version anywhere from my ET960 (which has similar hardware to MDA compact & Yakumo Omikron). Please advice.
Dear Sirs,
I recently purchased Auto DVD brand Clatronic AR-800, which has an integrated GPS.Device is based on the Windows CE 5.0 platform
https://www.youtube.com/watch?v=WiawSSeDw_k&list=UUIMUvFbuFaUHONBlVy7CcvA
I got the GPS antenna unsuccessfully trying to start navigation.
I tried with the updata Navigation with Igo for windows 5 will.
Failed
I found the web-site Cydle find your device on it but there is no software available for upgrade.
When starting navigation and just go right back to the start menu.
Other things in the device.
Can someone help me with filesystems which do I need to start navigating the DVD Clatronic AR-800
Sorry for the bad English is
Dejan, Serbia