Hi folks,
I see this is an extremely long thread,but I would really appreciate it if you could read it through and give a tip or two.Any help is greatly appreciated!
I just bricked an Honor 9,now I have access to fastboot(be able to flash) and recovery(TWRP or stock both OK),but I don't have ERecovery,when trying to go to EREC I stuck into a "ERROR MODE,ATTENTION!PLEASE UPDATE SYSTEM AGAIN" page,with warnings either about boot or recovery in red.I can go into fastboot with USB connected and the key-combo.Both TWRP and fastboot can flawlessly flash anything,I tried ways flashing system and oeminfo but when I boot system I either go into error mode or it first shows a Google logo splash screen(where it should be Honor Powered by Android) then a flowing Android logo(where it should be a Honor logo),and afterwards it reboots to error mode.
Below is my bricking procedure:crying:
I had STF-AL00B201 (EMUI 5.1) with Magisk root and system-less xposed before.Then I saw RR 6.0.0 and can't help wanting to flash it.First I used full package 8.0.0.336 to OTA then went into fastboot to flash.Surprisingly any command except fastboot reboot will not do.Then I updated to Test build B338 to encounter the same issue.
Code:
fastboot erase data
remote:command not allowed
fastboot flash system system.img
remote:sparse flash write failure
It seems as if there is a hidden FRP lock inside.But in Developer Option there is no OEM Unlock.I believed this is true,for:
1) @fl0wfr told me Chinese B321 has OEM Unlock Option.Since previous builds have it,the newer builds might still have it.
2)EMUI 8 includes Google Services,which is useless in China.
So I followed the advice someone told me on Huafans here
http://cn.ui.vmall.com/forum.php?mod=viewthread&tid=15241915&page=1&authorid=7879103:Flash STF-L09B360 via FF.After I tried I booted up with a somehow merged system(I did factory reset before boot).Apps like Swipe keyboard and Chrome came up but some Chinese Apps like Huawei Browser is missing.Still I saw the version number unchanged.
Then I was too shocked to do a correct action.I remember using HiSuite to rollback to STF-AL00B201 then I got a broken build number(EMUI 8 Android 7.0) and a broken model(STF).Then I was foolish enough to try the HWOTA re-brand method.When it comes to flashing the B120 files I saw the “update not found“ error on phone.Then it ends up with ERROR MODE.
Here is what I tried to save my phone:
Flashing firmware inside fastboot(succeed but no effect)
Restoring backuped boot in TWRP(it goes to Honor logo but went to error mode before the animation ended.)
Tried to flash oeminfo(and I got the Google and Android mention ed before.)
I haven't tried the full-firmware(two update.app) because I haven't got a SD card as big as 8 GB.But I tried the smaller file,it turned on with Honor splash screen but changed to Google instantly.
I have a unlocked bootloader,and in China it means my warranty is void.I am really desperate.
Thanks in advance.
Can it be a physically damaged memory or just a messed-up one?Even if I should go to the support this will prevent me from being cheated...Thanks
Finally got it fixed today,without paying a cent:highfive:Now on 8.0.0.341 with face unlock!
Short:Use HiSuite's system repair function.
Long:To be updated later due to lack of time now
Related
So I've been using magisk recently and today I received a notification prompting me to wanting to update to the latest version of Android OS for my One Plus 5, so I decided that the best course of action was to backup all of my important data and the delete the magisk software using their uninstall.zip file. Afterwards since I knew the device would be unrooted I placed the phone into fastboot and used ADB to re lock my bootloader which was in turn successful up until the point where I rebooted the phone and it had a text that read along the lines of "Your device is not trusted therefore it will not boot" so in response I decided to simply unlock the bootloader once again and in doing so my phone rebooted once again but it has gotten stuck in a bootloop. Any help would be appreciated and a thanks is in advance.
SOLVED.
Hi im hoping someone can help me, in an attempt to root my swift 2 i flashed twrp ensuring to use the correct version from the website. after not being able to find the Supersu zip file properly i attempted to restart the phone to locate it on the memory card, it was at this point i got the first warning of 'your device software cant be checked for corruption, please lock the boot loader' after that i get the dm-verity error and then the first wileyfox powered by android screen pops up and freezes there indefinitely. occasionally the second orange wileyfox logo will load but then that will freeze too!
please help its a brand new phone and im nearly crying over this!!!
https://forum.xda-developers.com/swift-2/how-to/marmite-wileyfox-ota-nougat-android-7-1-t3654999
Have a look at the first post Section 3 on that post should help you
mostly the part related to
adb reboot "dm-verity enforcing"
Flash stock recovery and only boot TWRP don't flash it
Thanks for the reply. Almost straight after posting I found a download for nougat 7.1.1 and flashed that, then updated it to the latest via OTA. I still get the verity warning occasionally and the phone seems laggier than before plus it reboots itself occasionally but at least it still works! No root but I may have another go at a later date.
Hi all, attempted to root my phone today following this guide.
I got right up to step 9 but upon trying to reboot and launch from TWRP I began to have trouble. I've been able to access TWRP once, but after confirming install of SuperSU (step 11 here, my phone booted to the LG splash and I got the boot loop saying 'Your phone is unsecure, bootloader is unlocked' or words to that effect. Orange ! triangle.
I can launch to fastboot, or download mode. Turning on to a factory reset sends me back to a boot loop after confirming I would like to reset (leading me to believe I've not got a stock ROM in there at all).
Now when I try to flash any version of TWRP from command prompt in my ADB folder, I'm told my phone is corrupt and it won't allow me to flash.
Alternatively, trying to flash a stock ROM doesn't work either. LGUP does not recognise my model, it only shows COM Ports: [COM4, H85020s]. I've also tried using UPPERCUT but I get the following error: "Error reading from file: C:\Users\...\Roaming\Temp\F9FB5BD\TempFolder\UPPERCUT.exe. Verify the file exists and that you can access it." I've attempted running UPPERCUT from various locations, extracted.
I'm on Windows 10 and I've been trying desperately for the last 12 hours crawling through this site/ other articles for some kind of solution to give my phone SOME kind of functionality. Ultimate goal was LineageOS but now I'd be more than happy getting back to stock. I'd really appreciate any help, hope I've given enough information.
Hi all, I am stuck.
I got my Mate 10 Pro (BLA-L29) and wanted to install LinageOS 15. I followed the guide here, rooting and everything went fine. I installed LinageOS 15, the most current build then, via fastboot flash system systemXXX.img. The process went well, the phone rebooted. But since then its stuck in eRecovery Mode. It offered me the "factory wipe" option on the first time, since then I get the options of Rescue (which times out or can't find the files), Shutdown and reboot. It also shows a "this device is not to be trusted" splashscreen during boot, including a link that leads to a 404 on the EMUI-OS-Site. Sorry if that has been asked already i did not find much regarding eRecovery.
I managed to install TWRP, but strangely it still boots into eRecovery. I can force it to boot into TWRP, but it simply will not switch away from eRecovery.
So, what are my options?
1) wait and see, try new versions of LinageOS.
2) use the firmware finder to get the original firmware (any pointers about which one? I'd go for the earliest 8.0 for the BLA-L29?) But how can I get it to the phone since its not an image and the phone does not have a SD-Card? Can I mount it via USB?
3) Get rid of eRecovery or force a switch to TWRP - is that doable?
Any help would be greatly appreciated. I did a lot of custom firmware back when I had the first Desire, but since then I used Blackberry or other, non-rooted devices. I want my control over my OS back.
Thank you in advance, let me know if you need any more information.
Ok, if anyone else needs help:
This helped me, I got back to the Mate 10 Pro Stock ROM
https://forum.xda-developers.com/mate-10/how-to/root-updates-rebranding-unbricking-t3701970
Important: after flashing, you need to remove the USB-cable, otherwise it will just boot into recovery
Hello, I bought a used mi9t and knowing that it had a boot problem (this is what the seller wrote in the sale description) and naively believed that I would be repaired easily as I had already done before.
the mi9t starts but freezes after + - 5 sec and reboot and so on, so I do not have time to do a reset, activate develop mode, unlock the bootloader etc ...
I arrived started in recovery and or in fastboot, a wipe data does not change anything, I of course tried to flash via miflash and miflash pro etc ... but as the bootloader is locked, develop mode not active etc ... nothing did not work. I managed to flash once in recovery, assistant mi but it did not change anything although the attempt arrived at 100%, I tried this method again but it does not want to do it anymore.
it is in miu in V11.0.5.0.QFJEUXM so I tried with the following but without result.
Looks like Android isn't complete, I think the person who sold it to me missed the Flash.
there I do not know what to do, I looked everywhere on the net for a solution but found nothing so as a last chance, I post here and elsewhere while crossing my fingers.
thanks in advance
I tried all these rom but without result
and via miflash I have the error anti rollback check error
error sorry
Try china newest rom with fastboot