so i rooted my phone and after that i decided to disable the 'oem unlock' and when i restarted my device itshowed 'custom binary lock by frp' so used odin to flash a firmware but it failed (it says complete write failed)so i tried again but it still failed...then i flashed a combination file and it passed...but phone opend in 'binary factory' mode and now i dont know what to do..
my phone's model is smg570f
help me
Related
I received a customer's phone and he said it wont boot. He didn't speak very good English but i checked it out and we accepted it as a flash. Anyways when you go to boot it says 'installing system update' and after a few moments says 'no command' then goes to recovery mode. I tried to flash a few different firmwares and they were successful but when I went to boot it it said 'installing system update' but actually has a percentage bar. But after it finishes it says 'no command' again. While in odin mode it also says FRP Lock is on. I'm assuming this guy tried some **** and failed and brought it to us as last hope. Any advice on what to try next?
Hi first you need to make FRP to do that you need to have adb enabled
Flash this adb enable file with odin.
https://www.google.rs/amp/www.pakfi...p-download-samsung-n920c-adb-enable-file/amp/
Now you can remove frp with realterm or any other tool or box.
https://www.youtube.com/watch?v=dH_ibkLjSkI
I had another tool if that doesn't work .
G935P failed to root, shows "Custom binary blocked by SECURE BOOT (modem.bin)", help!
I have Samsung S7 Edge (G935P) that I wanted to unlock, is in android version 7.0, so I downloaded root file from https://download.chainfire.eu/1087/...to-Root-hero2qltespr-hero2qltespr-smg935p.zip and flash the phone with it but the root flashing did not complete, then the phone started writing that I flashed the phone with unsupported unlock file, then I download stock rom from https://www.sammobile.com/ and flash the phone complete and it started writing on top of the screen in red color this below;
Custom binary blocked by SECURE BOOT (modem.bin)
And also showing on the screen this on the link below;
https://lionfinger.com/gsmerrors/s7edge_error1.jpg
This are also how the download mode and recovery mode shows;
Download mode => https://lionfinger.com/gsmerrors/s7edge_error2.jpg
Recovery mode => https://lionfinger.com/gsmerrors/s7edge_error3.jpg
Please someone help me on how to revive the phone to boot completely.
Thanks!
Hi , try with this one :
https://updato.com/firmware-archive-select-model?record=E6BB0C3642A611E99F15FA163EE8F90B
or this one :
https://updato.com/firmware-archive-select-model?record=E8FFA23642A611E99F15FA163EE8F90B
Teddy Lo said:
Hi , try with this one :
https://updato.com/firmware-archive-select-model?record=E6BB0C3642A611E99F15FA163EE8F90B
or this one :
https://updato.com/firmware-archive-select-model?record=E8FFA23642A611E99F15FA163EE8F90B
Click to expand...
Click to collapse
Thanks.
Both of them are the same file.
If I flashed this file, will it make it to come on completely?
Thanks
Hi,
I can't use my tablet anymore tried Odin to re-install the origin firmware "SM-T825Y_1_20180122165040_zf84f94qoe_fac.zip" (new android 8 stock ROM) but it fails, Odin shows the transfer has PASSED but I still get this message in the screen:-
"Security Error: This device has been flashed with unathorised software & is locked.
Call your mobile operator for additional support. "
I wasn't planning flashing a custom ROM the only thing I did is put OEM Lock on, not sure why I did that.
When I put in Download Mode it shows this in the screen:-
ODIN MODE [High Speed]
PRODUCT NAME: SM-T825Y
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FAP LOCK: ON
OEM LOCK: ON
DID: 03EA1E00AE16
WARRANTY VOID: 0x1 (Ox20C)
QUALCOM SECUREBOOT: ENABLE
AP SWREV: B3 (1, 1, 1, 1, 1) K2 S2
SECURE DOWNLOAD: ENABLE
CCIC: S2 MM005 HW: 4
BOOT: 6 MAIN: DS
Regards,
Sal.
1. It's FRP not FAP ya perv.
2. Reflash firmware with odin, do not go into download mode afterwards before 3.
3. The rest watch this video carefully, and next time you want to leave your device stock, leave it stock, if you want to install a custom rom or twrp, do not have auto reboot ticked.
4. here is link ---> https://www.youtube.com/watch?v=o0T-CR-KpfM
I did reflash with odin but I still get this message "Security Error: This device has been flashed with unathorised software & is locked.
Call your mobile operator for additional support. " There is another small message on top , "Custom binary blocked by FRP. (boot.img)"
Odin tells me its PASSED but the Tablet still says its locked FRP and OEM locked .
In download mode I am getting same info.
I just went to the Samsung Shop and they fixed it for free, they said they just put a new firmware not sure how they did it but I tried it myself with latest firmware but I couldn't get rid of the lock, I am missing something? like software? or just not enough info about about getting rid of locks?
I had the same issue after i installed a Xposed module. Had to reflash Pie Bootloader and Rom via odin. Now it boots, but i can't flash twrp anymore... It always fails.
After rebooting my device (Android 8, rooted+TWRP as recovery), i got a blue screen with the error message :"Security Error: This Device has been flashed with unauthorized software & locked". I tried getting into recovery but FRP blocked it. Download mode says that oem lock is on, but i dont remember turning the oem unlocker off. I tried to flash the Stockfirmware back on, but while it passed (BL,AP,Home-CSC), i still got the blue screen with the Security Error. When i try to flash with the normal CSC, i get the message that frp is enabled and it ignores the pit.
Can someone help me?
Edit: The Problem was that i tried to flash the Rom with odin 3.12 not 3.13. After i used Odin 3.13 for the Flash it worked again.
So i tried to root my samsung j610F , i set twrp installed magisk 20.0v zip but when i got back to magisk apk i saw that the latest magisk version is not installed so i tried everything didn't work, but after a while i saw that in this forum that samsung j610F has a custom boot.img after that i tried resetting the phone from the device itself not from twrp when the rebooted it said to me "Custom Binary blocked by oem lock recovery.img" so when i put it in download mode and connect it to pc the notification didn't pop up even in odin
so i need help everyone to fix my phone
(Sry for bad english)