Hi guys
Last week i have buy Redmi 5 plus 3/32 and run normally but suddenly tonight when i use for listening music and view instagram app my redmi 5 plus is dead no respond when long press power button or fastboot key but when i plug into power the led white is blink fast, before i go to service center is anyway i can power on my redmi 5 plus ??
Anyone can help me ??
Thanks
soomat said:
Hi guys
Last week i have buy Redmi 5 plus 3/32 and run normally but suddenly tonight when i use for listening music and view instagram app my redmi 5 plus is dead no respond when long press power button or fastboot key but when i plug into power the led white is blink fast, before i go to service center is anyway i can power on my redmi 5 plus ??
Anyone can help me ??
Thanks
Click to expand...
Click to collapse
Well, it´s difficult to know exactly what cause this sudden dead. When I receive myy device from AliExpress I noted that bootloader was unlocked and when I try to flash through miflash tool (it works with device in fastboot mode) it says permission denied, it means that something was wrong in this unlock-procedure; I don´t know if you purchased in this conditions but this is an alert signal.
I could to enter in fastboot and how was unlocked I flashed TWRP and used a custom rom, but you know if it is a similar case that could help you.
First of all check your battery charge and be sure that you are pressing correctly vol down + pwr at same time without realease any till bunny appears but if you have a locked bootloader you can´t use miflash tool. Also you can try to enter in fastboot at same time that you connecting to charger press vol down.
There is a special mode EDL (download for Xiaomi) that is used to flash a rom without unlock bootloader, of course this method is hidden for any user.
You can Google these two options to enter to EDL mode; Normal method is pressing the three buttons at same time that you connect device to pc till vibrates then release but not always works that.
- Deep cable EDL
- Test Point (you need to open the cover)
Then if succesfull you have to download your fastboot rom image, drivers and also miphone tool (if not the same that miflash tool) this tool works in download mode to flash Xiaomi devices
Related
Hi guys,
my phone bricked and so I wanted to reflash the stock rom.
Since xiaomi has not given me the permission to unlock the bootloader yet, I had to reflash using the download mode method.
The flash go through successful but after that I get stuck on "MI Powered By Android", I flashed the version stable global V8.0.2.0.LAIMIDG using MiFlash 2015.10.28.0.
What am I missing?
Thank you
monsteroo said:
Hi guys,
my phone bricked and so I wanted to reflash the stock rom.
Since xiaomi has not given me the permission to unlock the bootloader yet, I had to reflash using the download mode method.
The flash go through successful but after that I get stuck on "MI Powered By Android", I flashed the version stable global V8.0.2.0.LAIMIDG using MiFlash 2015.10.28.0.
What am I missing?
Thank you
Click to expand...
Click to collapse
Okay, it just took a ****ton to do the first boot, sorry for the **** post.
Did you disabled any apps from Google Play?
Had this problem before
You need to force entering the download mode. It worked for me.
here are the steps for forcing download mode, credit to Iyengar from MIUI forum, I can't just yet post any links here
1) Power phone off
2) Plug USB into Computer
3) Plug microUSB into phone
4) Hold pwr + vol up + vol down
5) When Batt icon goes away, release pwr, still holding vol up + vol down
6) Yellow /_\ (triangle, Downloading, Andy shoveling, Do not turn off Target!!! symbol)
You should now be in Download mode.
and i suggest you to use another cable maybe,
or just be careful with the steps -
step 1 - getting into download mode
step 2 - connect the phone to the pc
step 3 - opening miflash
be sure miflash is closed before step 1
Hello, I am fresh Xiaomi Redmi 3s user. I want to flash my rom to latest global dev version but i can't start the download mode.
I am holding vol up + power button, phone starts in Recovery Mode, I click the Download button and smartphone starts the system normally without any „black screen”.
Do you have any ideas how to flash this phone (bootloader disabled)? I need it because there is small bug with BT that make impossible to use Mi Band.
Thanks in advance.
mustek36 said:
Hello, I am fresh Xiaomi Redmi 3s user. I want to flash my rom to latest global dev version but i can't start the download mode.
I am holding vol up + power button, phone starts in Recovery Mode, I click the Download button and smartphone starts the system normally without any „black screen”.
Do you have any ideas how to flash this phone (bootloader disabled)? I need it because there is small bug with BT that make impossible to use Mi Band.
Thanks in advance.
Click to expand...
Click to collapse
i am a redmi 3 pro user so i dont know how you can go to edl mode.google on how to boot redmi 3s in edl mode then you can flash the rom.
can you boot on fastboot mode ?
So I check this tut: xiaomitips.com/guide/how-to-put-redmi-3-into-edl-mode/
1st method doesn't work. Phone restart and starts system normally.
2nd don't work on win 10 64bit,.
3rd - nothing happens. Phone shows battery charging. Nothing more.
BUT on the windows 7 64 bit second method works correctly
hello i recently tried to go back to my stock miui rom on my redmi note 3 and therefore downloaded a recovery rom in order to do that...but the thing is all the miui roms for all redmi devices were posted there and i made a huge mistake and downloaded the recovery rom for redmi 3 pro and only after i flashed the rom through recovery and when it didnt start at all i realised my mistake as of now it wont boot into fastboot or recovery..it wont even vibrate when it push the power button..all it does is blink a red light when i connect it to a charging cable...anyone facing anything remotely similar please leave me some answers.
You can try the next thing If the screen is completely black and red blinking led..
Connect USB and look at your PC Device info.
If you see the there the Qualcomm 9008 driver, the phone is in EDL mode and you can flash a better rom with Miflash.
good luck
vish9180 said:
hello i recently tried to go back to my stock miui rom on my redmi note 3 and therefore downloaded a recovery rom in order to do that...but the thing is all the miui roms for all redmi devices were posted there and i made a huge mistake and downloaded the recovery rom for redmi 3 pro and only after i flashed the rom through recovery and when it didnt start at all i realised my mistake as of now it wont boot into fastboot or recovery..it wont even vibrate when it push the power button..all it does is blink a red light when i connect it to a charging cable...anyone facing anything remotely similar please leave me some answers.
Click to expand...
Click to collapse
If your phone is not in eld mode you can do one thing. Hold your phone as you can press both the volume button simultaneously than connect usb cable to pc than first insert micro usb in your device than instantly press both the volume button. If led blinking that means your phone in eld mode
Hi everyone i have a xiaomi redmi 3 pro i think because it has 4 gb of ram, and it doesnt on anymore. I was flashing the stock rom with twrp but it block the process, I turned off my phone and now it doesn't on. No fastboot, No recovery, nothing. The screen doesn't on.
I've tried to connect it with the computer, and it shows a "Qualcomm HS-USB QDLoader 9008 (COM 20)" so I've read some guides that made me use the xiaomi flash tool but when I tried to install the global rom but il fails with "cannot receive hello packet"
PLEASE HELP ME I DON'T KNOW HOW TO DO!
leocap33 said:
Hi everyone i have a xiaomi redmi 3 pro i think because it has 4 gb of ram, and it doesnt on anymore. I was flashing the stock rom with twrp but it block the process, I turned off my phone and now it doesn't on. No fastboot, No recovery, nothing. The screen doesn't on.
I've tried to connect it with the computer, and it shows a "Qualcomm HS-USB QDLoader 9008 (COM 20)" so I've read some guides that made me use the xiaomi flash tool but when I tried to install the global rom but il fails with "cannot receive hello packet"
PLEASE HELP ME I DON'T KNOW HOW TO DO!
Click to expand...
Click to collapse
I have very similiar problem with you, i hope someone has a solution
Wikusaurus said:
I have very similiar problem with you, i hope someone has a solution
Click to expand...
Click to collapse
Edit: I've found the solution.
1. go into EDL mode by pressing Power vol+ vol-
2. use miphone 20151028, don't use recent mi flash
3. Flash TWRP
4. Proceed to flash ROM (in my case i use RR Os) via TWRP
Hello, is it possible that I have my phone bricked after a battery replacement?
Heres what happened: I had obviously a battery problem. So I ordered one from ebay and I replaced it. The new battery seem to work, however the phone will not respond to the buttons. Not any buttons. Only if I plug in a cable, mi logo appears for a few seconds and then a big battery bar shows for a few more seconds. Then nothing. (If I put in the old battery and I plug in a cable, the reaction is the same BUT no battery bar appears). The phone does not respond to any buttons like vol +/- holding together with power on, etc. Any help? Thanks, Filip.
Dexaderon said:
Hello, is it possible that I have my phone bricked after a battery replacement?
Heres what happened: I had obviously a battery problem. So I ordered one from ebay and I replaced it. The new battery seem to work, however the phone will not respond to the buttons. Not any buttons. Only if I plug in a cable, mi logo appears for a few seconds and then a big battery bar shows for a few more seconds. Then nothing. (If I put in the old battery and I plug in a cable, the reaction is the same BUT no battery bar appears). The phone does not respond to any buttons like vol +/- holding together with power on, etc. Any help? Thanks, Filip.
Click to expand...
Click to collapse
your battery/connector/header(on mainboard side) seems broken. battery usually does not impact any software. It's better if you open new thread specifically about your problem, so anyone can join to discuss further.
Hello.
last night i was trying to flash miui 8 on my device via twrp but it takes too long so the batery died, thats because i was using otg.
now my phone wont charge and wont turned on, no vibration, no edl, no fastboot, just blank screen.
but when i connect it to PC mi flash detects com 10, so i flashed twrp and succeded, but my device still wont turned on, i tried flashing official ROMS for redmi 3 pro, but failed, it said error in hello packet or something, sometime the error change to ping via firehouse failed.
anyone has a solution? i really appreciated it.
Thanks.
Edit: I've found the solution.
1. go into EDL mode by pressing Power vol+ vol-
2. use miphone 20151028, don't use recent mi flash
3. Flash TWRP
4. Proceed to flash ROM (in my case i use RR Os) via TWRP
bricked after battery change
Hello,
I had obviously a battery problem. So I ordered one from ebay and I replaced it. The new battery seem to work, however the phone will not respond to the buttons. Not any buttons. Only if I plug in a cable, mi logo appears for a few seconds and then a big battery bar shows for a few more seconds. Then nothing. (If I put in the old battery and I plug in a cable, the reaction is the same BUT no battery bar appears). Any help? Thanks, Filip.