Related
Hi this tutorial is for them who wants to upgrade to Android 6.0 on J5 and also for those who wants to downgrade back to 5.1 on their J5 (2015) manually using odin.
This tutorial will be divided into three section upgrade, downgrade and rooting.
Upgrade to Android 6.0
As Samsung has started rolling out android 6.0 for J5 (2015) model. It will be available to all the regions sooner or later on most of the models of J5. Incase if you are not getting OTA update of android 6.0 on your country and are curious to try Android Marshmallow, you can try to flash android 6.0 available for other country. For example: If you have J500H model and android 6.0 for J500H is available for some other countries but not in your country than you can download android 6.0 firmware of those countries and flash it through Odin.
Note: The model number of J5 should be same for example you cannot flash J500F firmware to J500H ,
you can only flash firmware of J500H to J500H, countries or area does not matter as long as the
device model is same.
Procedure:
1. Go to the link below and search for firmware for your device. (Eg: Galaxy J500H)
2. You will find firmware for various regions and android version. Download the android 6.0 firmware for your
region. If you don’t get android 6.0 for your region than download android 6.0 available for any region as you
prefer.
3. Download odin from the link below.
4. Backup any necessary things like apps, contacts or files as you may loose them.
5. Now follow the instruction given below and flash android 6.0 to your j5.
PRE-REQUIREMENTS:
Download & Install Galaxy USB Driver on your computer,
Enable USB debugging on your Galaxy J5 smartphone and OEM unlocking.
Your phone battery should be at 80% or above.
How to Install Stock Rom on Galaxy J5
1 . After downloading the Galaxy J5 Firmware and Odin software files from the download section.
2. Extract/unzip both files on your computer.
3. Now, boot your Samsung Galaxy J5 into download mode. To do that turn off the phone, after the phone is off,
press and hold the Volume Down + Home + Power buttons at the same time.
4. Connect your Galaxy J5 to your computer using USB Cable and wait till Odin software detects it. Once, Odin
software detects your phone, you will see the Added message on Odin.
5. Before installing the stock firmware on Galaxy J5 make sure that both Auto Reboot and F.Reset Time are selected.
Then, click on the AP button on Odin software and select the stock Rom where you have previously extracted it.
Now click start button. Odin will start flashing.
6. In the end, on the Odin software the pass message should be displayed and your Samsung Galaxy J5 will
reboot automatically.
7. Congratulation you have upgraded to android 6.0 Marshmallow.
Detailed tutorial for flashing via Odin:
https://androidmtk.com/flash-samsung-stock-rom-using-odin
Downloads:
1. Firmware
http://www.sammobile.com/firmwares/
http://updato.com/firmware-archive-select-model
2. USB driver
https://androidmtk.com/download-samsung-usb-drivers
3. Odin
https://androidmtk.com/download-odin-downloader-versions
Downgrade to Android 5.1.1
Incase if you don’t like android 6.0 and want to downgrade you can downgrade to android 5.1.1 by following these
steps.
1. Download 5.1.1 firmware for your region from the given link.
2. Follow the steps provided in above upgrade tutorial and flash the firmware using the Odin.
Rooting:
For rooting your J5 on Android 6.0 as well as Android 5.1.1 follow these steps.
1. Download the TWRP recovery from the link below.
Android 5.1.1 (Lollipop) ( Thanks @Nick Verse for TWRP recovery)
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j5-t3338869
Android 6.0 (Marshmallow) (Thanks @ganesh varma for TWRP recovery)
http://forum.xda-developers.com/android/development/recovery-samsung-galaxy-j500f-t3416960
2. Download Supersu zip from the link below
https://download.chainfire.eu/696/supersu/
For Marshmallow Users if you are facing bootloop after flashing supersu.zip . Flash the supersu file given in the link below.
https://mega.nz/#!zNVBhKjb!FZFKq6vaIPudYMoIajb-3zwuLOC26OHtdYY_TKt-6Qs (Thanks @jka_dark28 for link)
3. Now flash downloaded TWRP via Odin. (Follow the same process to Flash)
4. Transfer supersu zip file to your sd card.
5. After flashing TWRP. Reboot to recovery by pressing and holding Volume Up + Home + Power Button.
6. Now in TWRP select install, locate your Supersu zip file and flash it.
7. Than reboot your device. Congratulation you have rooted your device.
Note: Flashing TWRP and Supersu will void your warranty. So think before you flash. After flashing
TWRP do a nandroid backup first before flashing anything (even supersu file) so that if anything
goes wrong you can restore back.
And most important do everything on your own risk. I will not be responsible to any damage made to your device. But if you follow the process carefully you will not face any problem.
Hope this tutorial will help you all who don't have idea about these things.
Do write your comments and Hit thanks if it helped you.:laugh::good:
thanks for the tutorial!
testing
FOR MM
Wipe data factory reset in LL
Flash done : J500MUBU1BPF3_J500MZTO1BPF2_J500MUBU1BPF2_HOME.tar
Device does not have drk please install drk first ( knox counter =01 ), reboot.
after 15 min device start.
- TWR Working
- Root not workin on MM J500MUBU1BPF3_J500MZTO1BPF2_J500MUBU1BPF2_HOME.tar (Brazil) use this:
https://mega.nz/#!zNVBhKjb!FZFKq6vaIPudYMoIajb-3zwuLOC26OHtdYY_TKt-6Qs
- For Xposed framework use xposed-v86.0-sdk23-arm-custom-build-by-wanam-20160709:
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
What did you tried to flash? Is it MM or LL Firmware? And thanx for xposed and root file link.
Does this work on SM-J500F/DS? Its basically a normal J5 but with dual sim but I wanna be sure.
ZemoDroid said:
Does this work on SM-J500F/DS? Its basically a normal J5 but with dual sim but I wanna be sure.
Click to expand...
Click to collapse
What are you trying to? Upgrade to MM or downgrade to LL. And yes you can flash the firmware of J500F.
rjrulz007 said:
What are you trying to? Upgrade to MM or downgrade to LL. And yes you can flash the firmware of J500F.
Click to expand...
Click to collapse
I'm trying to root it.
Just flash twrp via odin. And install supersu zip via twrp. And remember it will void your warranty. One more thing do a nandroid backup before flashing anything.
Do I need to unlock bootloader before flashing twrp.? If it is required how can I do it on Samsung galaxy J500H running marshmallow 6.0.1?
Thank you
Whatisausername said:
Do I need to unlock bootloader before flashing twrp.? If it is required how can I do it on Samsung galaxy J500H running marshmallow 6.0.1?
Thank you
Click to expand...
Click to collapse
You have to enable USB debugging on your Galaxy J5 and OEM unlocking by going into developer Options. To enable developer option go to system, About Phone, and tap Build number 5/6 times. Let me know if you need more help.
.yeah it helped but my phone is stuck at samsung.
Whatisausername said:
I did both however my phone simply does not boot into twrp.. Odin said passed and knox is tripped.
Click to expand...
Click to collapse
Untick the Auto Reboot from the options in Odin and flash the recovery. After flashing finishes,power off the device(by removing battery) and hold [ VOLUME UP+HOME+POWER] to enter into the recovery and swipe to 'allow modifications'. Hope This will help you.
Whatisausername said:
.yeah it helped but my phone is stuck at samsung.
Click to expand...
Click to collapse
Did you flashed anything after installing TWRP recovery, like any zip files?
rjrulz007 said:
Did you flashed anything after installing TWRP recovery, like any zip files?
Click to expand...
Click to collapse
Yeah update-superuser.zip
Edit: flashed stock rom ie 5.1.1 via odin and updating to 6.0.1 will try second file.
Whatisausername said:
Yeah update-superuser.zip
Edit: flashed stock rom ie 5.1.1 via odin and updating to 6.0.1 will try second file.
Click to expand...
Click to collapse
rjrulz007 said:
Did you flashed anything after installing TWRP recovery, like any zip files?
Click to expand...
Click to collapse
OK well which partitions should i backup?
Works great, Thanks
Downgrade
Hi All!
If I want to downgrade from 6.0.1 to 5.1.1 via Odin, is it sure, that I need only one AP/PDA file from firmware sites?
Because I remember with an older phone, that if I need to downgrade, it need the other files too - Bootloader, Phone, CSC.
Is it sure that there is no need for them? If it, where can I download them?
Thanks!
Hello mate, I have gone back and forward from LP - MM a number of times.
I have had no problem with it as all.
I just flashed the firmware from from Sam mobile ( there are lots us links through out the ROMs thread)
I have only had to put the file into the AP and flashed no problem.
Just mage sure that the firmware is the correct one for your model
Sent from my Galaxy J5 using XDA Labs
Hey, I have a SM J500F 6.0.1, can I root it the same way as an 6.0 or do I have tobdo anything diferent??
I Suggest that if your device won't pass Samsung logo, put it in recovery mode and Factory Reset.
I Had that issue and i solved it doing that.:fingers-crossed:
Do I need stock recovery to only root my J5?? And will I lose all my data if I root it??
is there a custom rom SM-A107f ?
and how to install TWRP recovery on SM-A107f?
-No
-And does not exist yet from what I can tell.
ShaDisNX255 said:
-No
-And does not exist yet from what I can tell.
Click to expand...
Click to collapse
thats a sad news
Consider this
ddiv1de said:
thats a sad news
Click to expand...
Click to collapse
Have you tried gsi roms? for more information head over to geektoandroid.com i hope this helps
Infant9099 said:
Have you tried gsi roms? for more information head over to geektoandroid.com i hope this helps
Click to expand...
Click to collapse
I've tried a couple, none have booted for me.
GSI Treble rom
ShaDisNX255 said:
I've tried a couple, none have booted for me.
Click to expand...
Click to collapse
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Infant9099 said:
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Click to expand...
Click to collapse
You have the A10, which is a bit different than the A10s so it is most likely that any GSI that boots to your phone will not boot for mine. Besides, A10s does not have TWRP yet and A10 does
Infant9099 said:
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Click to expand...
Click to collapse
any luck pal?
Infant9099 said:
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Click to expand...
Click to collapse
any luck pal?
Can A107F (A10s) be rooted?
Rootthegalaxy said:
Can A107F (A10s) be rooted?
Click to expand...
Click to collapse
Yes.
how to root SM-A107f Samsung Galaxy A10s
ShaDisNX255 said:
Yes.
Click to expand...
Click to collapse
so this is what i did to root my A10s.
1. check what binary your phone is running I already updated mine so my phone is on Android 10 binary 6.
how to check your binary - goto setings-about phone-software info, check Baseband version so on my phone its A107FXXU6BTES the U6 indicates your binary some has U3 binary 3 or U5, S5 binary 5
once you determined your binary.
2. activate DEVELOPER OPTIONS then activate OEM UNLOCK
samfw.com/firmware/SM-A107F/XTC/A107FXXU6BTF
go to this website and download the appropriate firmware.
each will contain a BL, AP, CP, and Home_CSC.
3. once finished downloading unlock your bootloader just boot to download mode then there is an option to press and HOLD VOLUME UP to unlock bootloader then press volume up again. if it didn't reboot instantly press and hold volume up and down again just do it again until when you choose to unlockbootloader it will reboot instatly.
4. after unlocking bootloader just go through the entire process of setting up your phone keep the bootloader unlock, INSTALL Magisk manager, so yeah install magisk choose patch image then from your downloaded firmware remove the "MD5" at the end of the files so it will be AP_A107F.tar then choose the AP to patch hrough magisk
5. after patching copy the patched file to your PC extract it by WINRAR get the boot.img if its boot.img.lz4 it means patch was not sucessful
6. after getting the boot.img copy it to your phone again and patch again make sure to rename it boot.img from inside the generated patch file then compress it as TAR using 7zip
7. flash it through odin on AP section and there your magisk rooted.
sorry for the long post
nyxl said:
how to root SM-A107f Samsung Galaxy A10s
so this is what i did to root my A10s.
1. check what binary your phone is running I already updated mine so my phone is on Android 10 binary 6.
how to check your binary - goto setings-about phone-software info, check Baseband version so on my phone its A107FXXU6BTES the U6 indicates your binary some has U3 binary 3 or U5, S5 binary 5
once you determined your binary.
2. activate DEVELOPER OPTIONS then activate OEM UNLOCK
samfw.com/firmware/SM-A107F/XTC/A107FXXU6BTF
go to this website and download the appropriate firmware.
each will contain a BL, AP, CP, and Home_CSC.
3. once finished downloading unlock your bootloader just boot to download mode then there is an option to press and HOLD VOLUME UP to unlock bootloader then press volume up again. if it didn't reboot instantly press and hold volume up and down again just do it again until when you choose to unlockbootloader it will reboot instatly.
4. after unlocking bootloader just go through the entire process of setting up your phone keep the bootloader unlock, INSTALL Magisk manager, so yeah install magisk choose patch image then from your downloaded firmware remove the "MD5" at the end of the files so it will be AP_A107F.tar then choose the AP to patch hrough magisk
5. after patching copy the patched file to your PC extract it by WINRAR get the boot.img if its boot.img.lz4 it means patch was not sucessful
6. after getting the boot.img copy it to your phone again and patch again make sure to rename it boot.img from inside the generated patch file then compress it as TAR using 7zip
7. flash it through odin on AP section and there your magisk rooted.
sorry for the long post
Click to expand...
Click to collapse
HOW THA?
it worked guy
thank yu guy
I hope that you maybe able to help me as my bootloader will not load
1 The OEM UNLOCK is on
2 Have pressed buttons as instructions but the phone just switches of
guyz that they dont know how to write magisk patch with odin
i had same problem that when i started to writing i got a failed error
if your bootloader is unlocked and yu renamed patched.img to boot.img
but yu got error do this :
change your frimware
if your a10s frimware is
A107FU5ATA9 it dosent support any root . change your frimware to a107fxxs5asl3
now start patching magisk !
Mirloo_HK said:
guyz that they dont know how to write magisk patch with odin
i had same problem that when i started to writing i got a failed error
if your bootloader is unlocked and yu renamed patched.img to boot.img
but yu got error do this :
change your frimware
if your a10s frimware is
A107FU5ATA9 it dosent support any root . change your frimware to a107fxxs5asl3
now start patching magisk !
Click to expand...
Click to collapse
Hi '''Mirloo''''About rooting the (Samsung Galaxy 10s SM-A107f) I have tried most of the rooting akps with no luck (cfautoroot I have not tried yet)'''''''As for using Odin & magisk I am getting so many different instructions from different posts
1 unlock the bootloader This I have done successfully
The next steps using Magisk & Odin Start to get misleading
one site says Copy the AP to your phone and patch it where another site says says change the format of the AP file to tar by deleting .mds then copy it to your phone
I seem to get confused now as what to do next ''''Please could you give me full instructions ....Thank you
I have attempted to patch boot.img around 7 times unsuccessfully, I have the SM-A107F, can someone please send me the correctly patched boot image for my device, will be much appreciated.
i have this device, SM-A107F/DS, still no custom rom? is it possible to install lineage os?
fatdog1 said:
i have this device, SM-A107F/DS, still no custom rom? is it possible to install lineage os?
Click to expand...
Click to collapse
I'm also waiting for this. Tried flashing twrp recovery using odin but I failed. The error says "only official binaries are allowed to be flashed" tried flashing the original firmware but same error. Wondering why.
i have an Samsung Galaxy A01 SM-A015M with stock rom, i already tried what I could find on the internet, activated the oem unlock, restarted the device in download mode, I hit the key to unlock the bootloader, my cell phone was formatted, I did all the steps, I activated the developer settings again, and the option "oem unlock" was still active, supposedly it should appear grayed, I tried to install twrp and it didn't work, I tried to install magisk from Odin and it didn't work either, the download mode kept telling me that the bootloader was locked, I don't know what else to do!
sorry for the bad english, i'm using Google Translate
@bautifacha
Look inside here
jwoegerbauer said:
@bautifacha
Look inside here
Click to expand...
Click to collapse
I already tried that guide, it won't let me install the CROM Service apk, i went to other pages and it tells me the same thing "This application was not installed".
I also tried the Gearallnews "How To Unlock Bootloader On Samsung Galaxy A01 – OEM Unlock!" guide, and it didn't work either.
Now I am trying to install windows 7 (Because supposedly windows 10 has problems with fastboot, I tried and adb detected it but not fastboot, I already have all the drivers fine) in virtualbox to use fastboot on my a01, to try to unlock the bootloader from there.
I already installed twrp to many cell phones and something like this had never happened to me.
del
ROOT WITH MAGISK 23 WORKING 100% ON ANDROID 11 JUST UPGRADE UNLOCK BOOTLOADER AND FOLLOW THE INSTALLATION GUIDE https://topjohnwu.github.io/Magisk/install.html
Hello,
Finally, I can unlock the bootloader, flash twrp and root my Samsung Galaxy A01 (a01q) (SM-A015M).
All I need is just update to Android 11 and then I can unlock the bootloader and flash the magisk patched boot.img together the patched vbmeta.img.
I can flash TWRP using the image file "TWRP_3.5.2_A015F.img" sent by @tariqa
How To Root Samsung A01 (a015f/DS)
Hello, I want to ask how to root samsung galaxy a01 (a015f) , i want to instal f.lux for better blue light filter, Thanks!
forum.xda-developers.com
Thank you very much
1. Unlock your bootloader enter in download mode Vol+ + Vol- + USB conected to pc (Keep in mind that by doing this you will lose your files, it is advisable to make a backup of your photos, music, etc.)
2. Once you start your cell phone install magisk manager, Choosing the boot.img file of your rom into the app (Tip: Only!!! If your model is SM-A015M Android 11 I leave you my own modified boot.img to flash:
File on MEGA
mega.nz
Otherwise, you can download the firmware (3.79 gb) and extract the boot.img from the firmware of your model SM-A015 M / F ... Android 10, Android 11... etc. And No need for pc
https://samfrew.com/model/SM-A015M/
3. The image will begin to flash
4. When it restarts you will have Root on the cell phone!
------------------------------------------------------------------------------------------------------------------------------------------------
Extra: If you need the custom recovery I give you the link with my TWRP which is installed through the Odin program on a PC (this step does not delete your files)
File on MEGA
mega.nz
Keep in mind that to install TWRP you must deactivate the DM-VERITY & FORCEENCRYPT DISABLER I leave it in a link:
Zackptg5 - Android
zackptg5.com
This is a module that can be installed via magisk, which is necessary to decrypt the system ... so once TWRP is installed, it is advisable to uninstall it via Magisk to avoid R / W errors
Must Have An Unlocked Bootloader To Do This!
This A full stock firmware file I have created to flash with odin to automatically install TWRP recovery along with Disable VBMETA image. The Userdata _AIO tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 1 And Bit 2 Firmware!!!!
Downloads
SM-G981U/U1/W- Model
G981USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
SM-G986U/U1/W- Model
G986USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
SM-G988U/U1/W- Model
G988USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
Odin3_v3.14.1_3B_PatcheD.zip
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load files in appropriate odin slots
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
elliwigy
klabit87
Krog18
me2151
stang5litre
Raymonf for modified odin
rayan-refoua for boot animation
TheMadScientist
afaneh92
kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
JDBarlow for test S20 stuff
markfm For Bitsafe Firmware
Source For Userdata AIO
Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Z Fold2 5G BL V1
Fold 5G BL V1-4
Fold BL V1-4
Z Flip 5G BL V1
Z Flip BL V1-3
Note series 20 BL V1
S20 series BL V1
S20 FE 5G BL V1-2
Note 10 series BL V1-5
S10 Lite BL V1-3
Note 10+ 5G N976U BL V1-4
Note 10+ 5G N976V BL V1-5
S10 5G BL V1-5
S10 series BL V1-4
Note 9 BL V1-7
S9 series BL V1-9
Tab S6 BL V1-3
Tab S7 BL V1
Tab S7+ BL V1
A71 5G BL V1-2
A51 BL V1-5
A51 5G BL V1-4
A50 A505W BL V1-A
A50 A505U BL V1-B
S21 BL V1
A32 5G BL V1-3
Tab Active Pro 10.1 BL V1-4
XCover Pro BL V1-7
Good to see you here, I will make use of this. Thanks, I hope to see you playing with roms!
jhr5474 said:
Good to see you here, I will make use of this. Thanks, I hope to see you playing with roms!
Click to expand...
Click to collapse
I dont have s20 so Im limited what I can make
If tokens can be updated to flash higher bootloaders then I will adjust files accordingly
This works great! I flashed the entire U1 DUB7 update with the force wipe with BL files in the USERDATA slot. Everything went well.
Tried this on my G981V and failed on (auth). Was worth the try although I soft bricked my phone lol
scepz said:
Tried this on my G981V and failed on (auth). Was worth the try although I soft bricked my phone lol
Click to expand...
Click to collapse
So please give more info. What file you tried flash. You should be able to flash the ones that don’t have bootloaders in them
jrkruse said:
So please give more info. What file you tried flash. You should be able to flash the ones that don’t have bootloaders in them
Click to expand...
Click to collapse
Both files that say contain bootloader from UI 3.0 and that I'll keep my unlock token. kg status was checking as well.
scepz said:
Both files that say contain bootloader from UI 3.0 and that I'll keep my unlock token. kg status was checking as well.
Click to expand...
Click to collapse
Sorry I had no clue there was an sm-g981v mode. Just don’t flash the bl file of your stock firmware and you will be fine using my userdata without bl files
jrkruse said:
Sorry I had no clue there was an sm-g981v mode. Just don’t flash the bl file of your stock firmware and you will be fine using my userdata without bl files
Click to expand...
Click to collapse
I tried with just your user data file still didn't work. So your saying next time use all files besides BL?
scepz said:
I tried with just your user data file still didn't work. So your saying next time use all files besides BL?
Click to expand...
Click to collapse
I'll make a specific one for sm-g981v
jrkruse said:
I'll make a specific one for sm-g981v
Click to expand...
Click to collapse
Ok
scepz said:
Ok
Click to expand...
Click to collapse
files in the OP
jrkruse said:
Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
Downloads
SM-G981U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G981_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G981_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G981V- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G981V_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981V_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G981V_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981V_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G986U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G986_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G986_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G986_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G986_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G988U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G988_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G988_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G988_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G988_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
Odin3_v3.14.1_3B_PatcheD.zip
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_G98*U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_G98*U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_22_S20_Series.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
Click to expand...
Click to collapse
Does this work on s20 plus g9860?
If not...can you make a file for SM-G9860 TGY.
This is the link for latest firmware
Download Samsung Galaxy S20+ SM-G9860 TGY Hong Kong firmware
All Samsung firmwares for Galaxy S20+ in Hong Kong with model code SM-G9860. We offer free and fast download options. Check them out now.
www.sammobile.com
Gianni's said:
Does this work on s20 plus g9860?
If not...can you make a file for SM-G9860 TGY.
This is the link for latest firmware
Download Samsung Galaxy S20+ SM-G9860 TGY Hong Kong firmware
All Samsung firmwares for Galaxy S20+ in Hong Kong with model code SM-G9860. We offer free and fast download options. Check them out now.
www.sammobile.com
Click to expand...
Click to collapse
The ones without bootloaders will work. The NO_BL ones. Probably have to use the force wipe one
So, if I have the S20+ (US Cellular) and want to try the 3.1 firmware:
1.) Download the firmware
2.) Put your file for it into user data field in Odin
3.) Put in AP, CSC (home or whatever to not overwrite my USC one I think) and the rest EXCEPT for the bootloader into Odin
4.) Flash as usual and then everything should work. I'll keep my unlock and be able to use the 3.1 firmware?
rlewis312010 said:
So, if I have the S20+ (US Cellular) and want to try the 3.1 firmware:
1.) Download the firmware
2.) Put your file for it into user data field in Odin
3.) Put in AP, CSC (home or whatever to not overwrite my USC one I think) and the rest EXCEPT for the bootloader into Odin
4.) Flash as usual and then everything should work. I'll keep my unlock and be able to use the 3.1 firmware?
Click to expand...
Click to collapse
I did it that way, used the BL included file and flashed all the stock files, after the full wipe everything that I needed was included. Worked great, on UI 3.1 rn
It worked for me also, thanks for making this.
hi jrkruse i just got an A71 5g unlocked (thanks afaneh92), and i was wondering if you could make an aio userdata file for it? so i can flash ui 3.1 firmware to it? like this for my s20 ultra..(this thread)
After a couple of months of deep research I have managed to find a solution to unlock bootloader and root our SMAO15F device.
1st step: If your on android 10 it's possible to unlock bootloader even if our device has that option by default.
Fortunately with the newly released of official android 11 we are able to do so all you gotta do is you have to jump to android 11 if you're still on android Q then proceed to the unlocking method.
2nd step: after bootloader unlock download this .tar file (patched boot image for android 11 samsung sma015f).
Final process: Go to download mode, open latest odin and import the attached file with the AP button, phone will automatically restart after the process or restart it manually if not,
voila our samsung a01 is now rooted without twrp. Now we just have to wait for someone to make a custom twrp for our device or wait for official twrp or kindly please let me know if there is.
Credits: to that russian guide for the patched boot file for android11 (sma015f)
Cool bro!, but, how i'm unlock the bootloader for A01?
ROOT WITH MAGISK 23 WORKING 100% ON ANDROID 11 JUST UPGRADE UNLOCK BOOTLOADER AND FOLLOW THE INSTALLATION GUIDE https://topjohnwu.github.io/Magisk/install.html
Kaik Ricardo said:
Cool bro!, but, how i'm unlock the bootloader for A01?
Click to expand...
Click to collapse
Vol+ and Vol - and plug the usb cable then long press vol+
Hello,
Finally, I can unlock the bootloader, flash twrp and root my Samsung Galaxy A01 (a01q) (SM-A015M).
All I need is just update to Android 11 and then I can unlock the bootloader and flash the magisk patched boot.img together the patched vbmeta.img.
I can flash TWRP using the image file "TWRP_3.5.2_A015F.img" sent by @tariqa
How To Root Samsung A01 (a015f/DS)
Hello, I want to ask how to root samsung galaxy a01 (a015f) , i want to instal f.lux for better blue light filter, Thanks!
forum.xda-developers.com
Thank you very much
1. Unlock your bootloader enter in download mode Vol+ + Vol- + USB conected to pc (Keep in mind that by doing this you will lose your files, it is advisable to make a backup of your photos, music, etc.)
2. Once you start your cell phone install magisk manager, Choosing the boot.img file of your rom into the app (Tip: Only!!! If your model is SM-A015M Android 11 I leave you my own modified boot.img to flash:
File on MEGA
mega.nz
Otherwise, you can download the firmware (3.79 gb) and extract the boot.img from the firmware of your model SM-A015 M / F ... Android 10, Android 11... etc. And No need for pc
https://samfrew.com/model/SM-A015M/
3. The image will begin to flash
4. When it restarts you will have Root on the cell phone!
------------------------------------------------------------------------------------------------------------------------------------------------
Extra: If you need the custom recovery I give you the link with my TWRP which is installed through the Odin program on a PC (this step does not delete your files)
File on MEGA
mega.nz
Keep in mind that to install TWRP you must deactivate the DM-VERITY & FORCEENCRYPT DISABLER I leave it in a link:
Zackptg5 - Android
zackptg5.com
This is a module that can be installed via magisk, which is necessary to decrypt the system ... so once TWRP is installed, it is advisable to uninstall it via Magisk to avoid R / W errors
Marti_Fajardo said:
After a couple of months of deep research I have managed to find a solution to unlock bootloader and root our SMAO15F device.
1st step: If your on android 10 it's possible to unlock bootloader even if our device has that option by default.
Fortunately with the newly released of official android 11 we are able to do so all you gotta do is you have to jump to android 11 if you're still on android Q then proceed to the unlocking method.
2nd step: after bootloader unlock download this .tar file (patched boot image for android 11 samsung sma015f).
Final process: Go to download mode, open latest odin and import the attached file with the AP button, phone will automatically restart after the process or restart it manually if not,
voila our samsung a01 is now rooted without twrp. Now we just have to wait for someone to make a custom twrp for our device or wait for official twrp or kindly please let me know if there is.
Credits: to that russian guide for the patched boot file for android11 (sma015f)
Click to expand...
Click to collapse
after flashing the AP, the phone won't boot and says can't load android system.
edit: i patched my own AP with Magisk and it worked.
So i managed to upgrade my samsung a01m/ds to android 11 & i had unlocked the bootloader. Afterwards i had use the magisk rooting process, then flashed a boot.img that i had extracted from firmware (if needed i will upload) then the phone restated and took like 7 minutes to start, having said that i setup my device but upon doing so i noticed i was not able to use wifi but i had mobile data , managed to get in and install root checker pro and i had root but there was root( will leave an image ) but i didn't enjoy the fact that the wifi was not working, my hotspot wasn't working. i never managed to install TWRP becuase i was tampering a little more and trip my knox. it's been like 2 months since it trip and the OEM UNLOCKING in developer options is yet to be visible so i can unlock the oem and start a fesh.
Marti_Fajardo said:
After a couple of months of deep research I have managed to find a solution to unlock bootloader and root our SMAO15F device.
1st step: If your on android 10 it's possible to unlock bootloader even if our device has that option by default.
Fortunately with the newly released of official android 11 we are able to do so all you gotta do is you have to jump to android 11 if you're still on android Q then proceed to the unlocking method.
2nd step: after bootloader unlock download this .tar file (patched boot image for android 11 samsung sma015f).
Final process: Go to download mode, open latest odin and import the attached file with the AP button, phone will automatically restart after the process or restart it manually if not,
voila our samsung a01 is now rooted without twrp. Now we just have to wait for someone to make a custom twrp for our device or wait for official twrp or kindly please let me know if there is.
Credits: to that russian guide for the patched boot file for android11 (sma015f)
Click to expand...
Click to collapse
I managed to root my phone using this method but after I rooted, my wifi was stuck at turning on. I would then restore it to its stock firmware to have the wifi back and it did, but then I rooted again and wifi got stuck again. How do I fix this problem?
Johnmarr said:
I managed to root my phone using this method but after I rooted, my wifi was stuck at turning on. I would then restore it to its stock firmware to have the wifi back and it did, but then I rooted again and wifi got stuck again. How do I fix this problem?
Click to expand...
Click to collapse
Did you try to enable or disable MAC randomizing?
how
VD171 said:
Did you try to enable or disable MAC randomizing?
Click to expand...
Click to collapse
How do I enable or disable mac randomizing?