After a lot of requests I'm starting to build my BinDroid Rom for HOX+ (Int. ONLY)
I do need some GOOD beta testers, as I publish only when all works fine.
Do you have what it takes, can you provide me the correct info, to fix what you found.
I do NOT need the general (end) user, as you might be flashing builds or kernels 5 times a day.
Send me a PM if you think you got it, and want it
Tnx
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
The main purpose of this thread is to unify all the useful web links, mainly other XDA threads, that contribute to improve and expand the development, guides, discussions and all other useful sources of data related to our device.
"HOW DO I KNOW IF THIS IS MY DEVICE?"
The device we are talking about here is a Huawei Mediapad T1 10, which consists in at least 3 different variants:
- LTE variant (T1-A21L)
-WiFi variant (T1-A21W)
-LTE chinese variant (T1-A23L)
They are exactly the same device in terms of hardware and software (this one vary a little), the only difference is that one has SIM slot (T1-A21L) and the other one no (T1-A21W).
An important point to keep in mind is the codename of our device, which is a technical name all Android device have and which identify exclusively to the device. This is very usual in development threads such as ROMs and Recovery threads, so you might see it in the thread title.
The codename of our device is hwt1a21l
-Technical information of our device. Specs are from the LTE variant but it applies for the WiFi variant expect for the SIM slot: [url]http://m.huawei.com/ukmobile/consumer/tablets/detail/mediapad-t1-10-uk.htm[/URL]
If you still have doubts about this topic i suggest you to ask you doubts or check other people's doubts.
RULES:
1- Please only discussions related to our device (Huawei Mediapad T1 10 T1-A21L/T1-A21W). See previous paragraph to know if you own this device.
2- If you want to report an issue or any other subject related to an existing rom, recovery or other subjects try to keep the conversations in the respective thread of what you want to talk. It's not mandatory but it's a good way to keep conversations in the proper thread so other people can check it.
3- Try to keep clean and proper conversations when posting in this thread.
ROMS:
- EMUI 3.0 Light: [url]https://forum.xda-developers.com/huawei-mediapad/development/rom-emui-3-0-light-mediapad-t1-10-t3609602[/URL]
- CarbonROM KK (Unofficial): [url]https://forum.xda-developers.com/huawei-mediapad/development/rom-carbonrom-mediapad-t1-10-t3662497[/URL]
RECOVERIES:
- Philz Touch 6.59.0: link
- TWRP: link
ROOT:
- SuperSU for EMUI 3.0 (may be valid for other ROMs): link. Credits to @mann1
MODS/OTHER DEVELOPMENT RELATED TOPICS:
WIP.
STOCK FIRMWARE:
-EMUI 3.0 Stock ROM (V100R001C232B009CUSTC100D001 for T1-A21w & V100R001C100B013CUSTC100D001 for T1-A21L) : link
HOW TO UNLOCK THE BOOTLOADER:
WIP.
UNBRICK THE DEVICE:
WIP.
Created 18/05/2017
Last update 23/02/2018
reserved
Updated post with a new ROM (EMUI 3.0 Light).
For those who pricked their devices and and have stuck in boot loop after rooting or trying new custom recovery, they need the stock BOOT or RECOVERY images from here.
Thanks, I love this.
I had my pc broken quite amount of time and i could not work on some roms that i was testing. I was planning to upload CarbonROM Kit Kat for our device, but unfortunately i see a lack of users activity for this device which makes me think that maybe it is not very relevant to create and upload the builds (which takes much more time than what it seems, and my time for this activities is quite limited).
If i see more interest for this then i could upload the rom, and maybe future ones.
MIRACAST
Hola podría alguien decirme como puedo activar el miracast en mi tablet huawei t1-a21l .
mustang_ssc said:
I had my pc broken quite amount of time and i could not work on some roms that i was testing. I was planning to upload CarbonROM Kit Kat for our device, but unfortunately i see a lack of users activity for this device which makes me think that maybe it is not very relevant to create and upload the builds (which takes much more time than what it seems, and my time for this activities is quite limited).
If i see more interest for this then i could upload the rom, and maybe future ones.
Click to expand...
Click to collapse
Dear mustang_ssc, I don't know if you are still wondering about usefulness of uploading CarbonROM KitKat for th t1 10 ? There is an important interest from my side for more than 1 device.
If I can be of any help to avoid important workload to you, I ll be pleased to contribute.
emmanuelix said:
Dear mustang_ssc, I don't know if you are still wondering about usefulness of uploading CarbonROM KitKat for th t1 10 ? There is an important interest from my side for more than 1 device.
If I can be of any help to avoid important workload to you, I ll be pleased to contribute.
Click to expand...
Click to collapse
@mustang_scc
+1 to that. I have the stock rom with root access.
The tablet mainly sits and collects dust right now so I wouldnt mind using it for testing.
Let me know if I can help.
emmanuelix said:
Dear mustang_ssc, I don't know if you are still wondering about usefulness of uploading CarbonROM KitKat for th t1 10 ? There is an important interest from my side for more than 1 device.
If I can be of any help to avoid important workload to you, I ll be pleased to contribute.
Click to expand...
Click to collapse
Apexaddicted said:
@mustang_scc
+1 to that. I have the stock rom with root access.
The tablet mainly sits and collects dust right now so I wouldnt mind using it for testing.
Let me know if I can help.
Click to expand...
Click to collapse
Though the bug are not solved yet, I will probably open a thread for the rom this weekend so people interested like you can install it, test it or keep it on his tablet without mind the current bugs.
I will keep you informed
The CarbonROM KK is ready for testing purpouses, i need testers. @emmanuelix , @Apexaddicted , @PinkOstrich or anyone who owns the LTE variant who would like to test it, please send me a PM.
PD: sorry for the delay about this, i was quite short of time and also had to port it again because i realized i lost all the ROMs when i formated my hard drive disk.
Deleted:
Duplicated post.
Sorry but I only own the WiFi version.
Apexaddicted said:
Sorry but I only own the WiFi version.
Click to expand...
Click to collapse
Don't worry, i will open the thread and people with the WiFi variant will be able to download it. I want people with the LTE one to test it because i own the WiFi Varian as well.
Also a reminder for everyone:
Keep in mind that the rom still has some few critical bugs which you may not be happy to flash the rom. The main bugs are:
-Camera not working
-Notification led not working
-Weird bug with the Play Store which does not allow to use it unless, on my experience, you wait for about 1 day to be able to use it.
mustang_ssc said:
Don't worry, i will open the thread and people with the WiFi variant will be able to download it. I want people with the LTE one to test it because i own the WiFi Varian as well.
Also a reminder for everyone:
Keep in mind that the rom still has some few critical bugs which you may not be happy to flash the rom. The main bugs are:
-Camera not working
-Notification led not working
-Weird bug with the Play Store which does not allow to use it unless, on my experience, you wait for about 1 day to be able to use it.
Click to expand...
Click to collapse
Thank you @mustang_ssc. I only own the Wi-Fi version also, sorry !
I have finally posted the ROM (CarbonROM). As mentioned it has not been tested on the LTE variant, but it should work properly as the Wi-Fi one.
Link: https://forum.xda-developers.com/huawei-mediapad/development/rom-carbonrom-mediapad-t1-10-t3662497
mustang_ssc said:
I had my pc broken quite amount of time and i could not work on some roms that i was testing. I was planning to upload CarbonROM Kit Kat for our device, but unfortunately i see a lack of users activity for this device which makes me think that maybe it is not very relevant to create and upload the builds (which takes much more time than what it seems, and my time for this activities is quite limited).
If i see more interest for this then i could upload the rom, and maybe future ones.
Click to expand...
Click to collapse
I would definitely appreciate it!
hooligan333 said:
I would definitely appreciate it!
Click to expand...
Click to collapse
You have the link for the rom on the previous post.
Alright, have good and bad news, let's start with the good one:
I have a completely working 5.1.1 Android ROM (EMUI 3.1) from the T1-A23L which works on the LTE and Wi-Fi variants (T1-A21L & T1_A21W), big thanks to @tenderVeteran who sent me this ROM and informed me about it. This means we finally have Lollipop for our device and we have the possibility to port another Lollipop ones.
The bad new is that i need to make it flashable but for some reason it does not boot. I need some more time to figure out about a solution on this topic and i will publish it as soon as i get it booting.
Glad to hear about the progress! Cant wait to try it out. Please let us know if there is anything we can do to help.
Additionally...Ive been looking for ways to compile a custom kernel for the mediapad. Have you tried this yet?
Rob
After extensive testing Sprint users can now go my thread at Aspire rom original thread . Thanks to @triskaw for working with me on Sprint fixes and @loudawg11 for Sprint beta testing !
You can download and install V5 and use SPR csc to get the rom working for you. All instructions needed are in OP.
I hope you will like the rom. You can comment in my original thread or here.
Enjoy the rom !
Latest testament of Aspire rom V5.0 working just great on Sprint:
https://forum.xda-developers.com/showpost.php?p=76619306&postcount=3417
This is just a testing thread for who wants to help in development, since not many users use Telegram, i will be posting my test builds here.
THERE WILL BE ONLY ONE TEST AT A TIME IN THE SECOND POST.
All discussions should be limited to this thread only, no pm.
Offitopic should be minimal as possible.
All reports should be with logs.
Don't report any issues which has been previously reported ( two to three reports are okay ) ( doesn't matter if same or different person ).
Thx.
Los 15 new build
Based on squid sources with updated IMS blobs
Check the network with all way you can
Go to network setting > enable enhanced 4g mode
Give logs when doing that.
https://mega.nz/#!pjgnyYwJ!r5xtD-x5E6ac3V6NIc-pvuYPtkYt8VLMy2xkk2Zjt38
Reserved
Added new build
See #post2
I just wanted to give you all a heads up that in my quest to fix up twrp/make custom ROMs, I've finally achieved a victory today after a couple weeks of effort. I have successfully compiled the N200 kernel from source. In the near future expect at least one custom kernel (likely to be caf upstreamed), and as of right now I am working on Lineage-18.1 bringup to start with then quickly move onto Android 12 custom ROMs long live the Nord n200!!
On a side note I could use some testers
Nord N200 Testers
Nord N200 Testers
A group for discussing N200 custom software testing. All off topic discussion has been moved to this group: https://t.me/+1qZHIItf9R80MTYx Check pinned messages for important messages and shared/confirmed working files.
t.me
Weird question but is it possible to add a wifi option to not broadcast ssid? Or is that not a kernel thing..
Also I can test but not until the end of next week
cass89 said:
Weird question but is it possible to add a wifi option to not broadcast ssid? Or is that not a kernel thing..
Also I can test but not until the end of next week
Click to expand...
Click to collapse
I'm not a kernel guru, It was luck that I got this kernel to compile lol.
But on a plus note, I did shim TWRP and managed to get it to mount the super.img so we will be able to flash gapps packages and magisk modules n stuff. I think I'm close to getting userdata decrypted as well
that group is very friendly and helpful, working towards development of this device
BTW, im Castiel in the TG