hello. on vodafone firmware 10d, i try to flash firmware kdz ver. 10e from wind or 10g from tim italy, but that is the advertisement i have after flashing and second reboot. i reset already but at every reboot the same advertisement. when i click on OK, the phone boots, but i want remove this error. can anyone tell me if is possible??
i use lg up
thanks
That's been covered plenty of times in the G5 (and even G3) forums, for example here:
http://forum.xda-developers.com/g4/help/lg-h815p-fix-matched-cust-nt-code-mmc-t3336034
http://forum.xda-developers.com/showpost.php?p=67285155&postcount=84
http://forum.xda-developers.com/showpost.php?p=67223982&postcount=73
If you use the search you'll find even more threads with it.
doesn't work the hidden menu access
with TWRP or root file explorer, navigate to root/cust and delete all folder content then reboot
you'll see message will no longer show up after reboot
i am not rooted
with no root there is no way as far as I know
hi, can you tell me where you found the v10g kdz? i only managed to find the wind v10e (and doesn't solve the direct sunlight issue)
thank you (anche in pm se vuoi)
v10g KDZ is only for some carriers
note: the base is kind of the same for lets say v10d OPEN EUR kdz and v10g carrier kdz, so thinking that installing v10g carrier branded version does not mean you are more updated then v10d OPEN EUR
Thank you!
I went to sell my G5 today, and the shop refused to buy it because of that pop-up on boot.
Just curious though, now I have erased the folder, what would happen if I -
a) Unroot
b) Relock the bootloader
I am on a global stock rom V-20v I believe.
I want my Virgin Moble UK G5 to think it's H3G in order to get WiFi calling to work. So instead of deleting all the files in '/cust' I updated op_list.cfg & cust_path_mapping.cfg by adding the missing MCC/MNC code from the error message and pointing them to the same place as the H3G entries, in my case
'23430,FF=/OP/H3G_COM'.
The phone now boots up without the 2 error messages (OP name by Buyer Code & Current version is not available) but I get the 'Buyer Code' message a few minutes after booting.
I'm not sure if changing the files, or deleting them is best. But with the files updated, looking at the Global Settings via ADB shows that wfc_ims_enabled=1
Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
This forum is not as useful as it used to be once upon a time. Disappointed.
Try with LG support tool from LG
Please update me with this case. I have twn vrsion also bought from one of the online shop in dubai and i want to flash also the uae kdz. thanks
---------- Post added at 06:49 PM ---------- Previous post was at 06:30 PM ----------
Dr.Alani said:
Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
Click to expand...
Click to collapse
Please try this one:
thebiker said:
I solved the problem. I have just updated all LG file. LG UP, LG Lab, LG 850 DLL. Finally I successfully updated my phone.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g5/help/lg-g5-brick-root-t3411389
Get the updated tools here for H860:
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
medo18 said:
Try with LG support tool from LG
Click to expand...
Click to collapse
Thanks for the suggestion. The LG support tool does not work with my version of LG G5 (I am not sure if it works with any G5 at all), it says that I need to use LG Bridge instead because LG Support Tools does not support my phone.
However, I tried the "Recovery" option in LG bridge, but it checks the IMEI and decides that my phone needs the latest Taiwan rom instead of what I want (which is UAE).
engineer000 said:
Please update me with this case. I have twn vrsion also bought from one of the online shop in dubai and i want to flash also the uae kdz. thanks
---------- Post added at 06:49 PM ---------- Previous post was at 06:30 PM ----------
Please try this one:
http://forum.xda-developers.com/lg-g5/help/lg-g5-brick-root-t3411389
Get the updated tools here for H860:
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
Click to expand...
Click to collapse
I already got the the newest version of LG UP. The phone is recognized, but it does not proceed with the upgrade properly.
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
Where did you bought yours? I bought from Yallashop.
Where are you seeing that error? As your phone startup? How about using the proper DLL on the guide and flash it again?
it seems to be related to different customizations. i don't know if flashing tW version will stop it. but this stopped me from flashing a AE fw
engineer000 said:
Where did you bought yours? I bought from Yallashop.
Where are you seeing that error? As your phone startup? How about using the proper DLL on the guide and flash it again?
it seems to be related to different customizations. i don't know if flashing tW version will stop it. but this stopped me from flashing a AE fw
Click to expand...
Click to collapse
I got mine from souq.com.
The error shows only at phone startup. Its not causing any other visible problem.
I couldn't get the H860 DLL msi anywhere on the web.
Sent from my LG-H860 using XDA-Developers mobile app
Dr.Alani said:
I got mine from souq.com.
The error shows only at phone startup. Its not causing any other visible problem.
I couldn't get the H860 DLL msi anywhere on the web.
Sent from my LG-H860 using XDA-Developers mobile app
Click to expand...
Click to collapse
Try it here:
Get the updated tools here for H860:
http://www.mylgphones.com/download-l...g-g5-h860.html
engineer000 said:
Try it here:
Get the updated tools here for H860:
http://www.mylgphones.com/download-l...g-g5-h860.html
Click to expand...
Click to collapse
I think the link is broken.
Dr.Alani said:
I think the link is broken.
Click to expand...
Click to collapse
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
http://www.mylgphones.com/download-lg-flash-files-dll-for-lg-g5.html
sorry it is broken :/
try this:
http://downloads.codefi.re/autoprime/LG/LG_G5/LGFlash/LGH860_20160316_LGFLASHv216.dll
http://downloads.codefi.re/autoprime/LG/LG_G5
Dr.Alani said:
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
You can eliminate the error by reflash the phone with LG bridge (can download officially from LG). In "Software update" tab, there's "Update error recovery" which will automatically download the official firmware for your G5 and of course, the annoying startup error message will go away.
ted presley said:
You can eliminate the error by reflash the phone with LG bridge (can download officially from LG). In "Software update" tab, there's "Update error recovery" which will automatically download the official firmware for your G5 and of course, the annoying startup error message will go away.
Click to expand...
Click to collapse
I am afraid that it might download the software based on the IMEI and then my phone will be back to Taiwan software instead of the AME currently installed.
Sent from my LG-H860 using XDA-Developers mobile app
Can you please write a detailed tutorial of how to flash a kdz on H860 variant? I have the same error and I can't find a way how to solve this. So many informations and nothing works. Thank you very much.
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
After this update is possible to root the H860?
Not working for me
Dr.Alani said:
This is how it was solved:
I believe that the issue was with the LG UP Store version. This is what I did:
1. Installed LG UP LAB v1.1.
2. Installed the H850DLL msi file.
3. Created a folder named C:\Program Files (x86)\LG Electronics\LGUP\model\H860
4. Copied the H850.DLL file from C:\Program Files (x86)\LG Electronics\LGUP\model\H850 to the new folder
5. Renamed the file LGUP_H850.DLL to LGUP_H860.DLL
6. Everything went on smoothly !!
The only error I get now is at startup "current version is not available for user. can't find matched cust for nt-code mcc/mnc subset" which I have not dug into but it does not bother me.
By the way @engineer000, most of the online stores in UAE suck!!
Click to expand...
Click to collapse
I installed required latest drivers.
I did exactly same procedure as mentioned above, but not working for me.
Although it recognizes my device. (attached pic 1).
But when i try to select it gives error. (attached pic 2).
I also followed the procedure in last post by "BaBaK SpY" in following link
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
But same result as above.
I face the same problem as u did
Dr.Alani said:
Hi everyone,
I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g.
Using the patched version of LGFlashTool v2.0.1.6, I get an error "(S) Failed to Load". Using LGUP v1.14, the phone is recognized as H860, it restarts into download mode and gets to 9% (which is starting to send the KDZ to phone) and then it give an error msg:
Error: Error Code = 0x81000304
CBasicFlash::_func_LoadGPTF - ErrorCode:8224
I am working on a Windows 10 PC with all the drivers installed and I can access the phone through ADB, Fastboot, LG Bridge, with no issues. The only issue is that I am not able to flash the KDZ although it is for the same model H860.
I have tried a different PC and a re-downloaded the KDZ directly from LG's website. Same issues.
PS: In LGUP, I tried: Refurbish and Upgrade options.
Does anyone have any suggestions?
UPDATE: I tried flashing a Singapore KDZ for H860 as well and it gave the same errors.
Click to expand...
Click to collapse
pLEASE Help me i face the same problem u did . i Tried evry method n facing the same problem :crying::crying::crying::crying:
---------- Post added at 12:13 PM ---------- Previous post was at 11:19 AM ----------
QSR1 said:
I installed required latest drivers.
I did exactly same procedure as mentioned above, but not working for me.
Although it recognizes my device. (attached pic 1).
But when i try to select it gives error. (attached pic 2).
I also followed the procedure in last post by "BaBaK SpY" in following link
http://www.mylgphones.com/download-lg-g5-stock-kdz-tot-firmware-lg-g5-h860.html
But same result as above.
Click to expand...
Click to collapse
my lgup says cannot load my h860 model
. i have h860 and update it with v20a hongkong rom. every thing is good only fast charge disppointing me and take alot of time to charge about 1.30hour to fully charge. i update via lgup and usb .
anybody face to this problem ?
any way or recommend to solve it?
i will attach the graph of battery charge in android 6 and android 7.
slope of line in android 6 battery charge is much higher than 7 .
---------- Post added at 05:02 PM ---------- Previous post was at 04:46 PM ----------
graph of battery charging in android 6 vrs android 7 in my lg h860.
http://s2.picofile.com/file/82827979...7_09_23_58.png
http://s3.picofile.com/file/82827982...6_22_30_00.png
android 7 charging speed very bad and is slow. and its clear in pictures.
why the reason???
Hello everyone, I'm residing in Korea by the moment... my carrier is olleh (KT)... I used to have an LG G pro 2 from the carrier so had no problem at all. recently I switched to a new G5. the problem now it's the model is F700L (from other carrier) and there are some benefits I get with my carrier (KT) that I can't when the phone doesn't match the same carrier ...
I've been reading and researching about changing the rom to the one from the other carrier, and LGUP throws error when saying: Error F700L > F700K ... I know there won't be any problem doing this because the hardware is the same. And as far as I know there's no possible way to root the phone and unlock the bootloader or install a custom one for later on install the other rom from there... :silly::crying::crying: .... so....
after so many days trying got disappointed and annoyed... gotta ask... is there any other way to flash without confirmation? (with Odin or other?... FlashTools doesn't get to communicate with the device in download mode... and LG Flash.. requires a DLL and can't find it anywhere...) ... or getting inside the phone using ssh (i'm linux user) or other with the help of the adb ... and get to edit the model just to change the freaking L by a K??
The other possible way could be editing the actual KDZ to match the info... I've tried WinHex but LGUP says: Invalid KDZ after the edition.... some other way?
will appreciate any idea... thanks!
Recently I replaced my LG V10 motherboard come with Lollipop 5.1.1, then I update to Nougat through LG Bridge. But when it restart to new Nougat OS it cant detect my sim card anymore... Also, the model also changed from H961N to H960A.
Any solution to switch the model back to H961N?? I tried to flash back to Lollipop but now the phone only stuck in download mode.
LG Bridge detected is H961N which is the correct model, while in LGUP is H960A.
Have you seen if the IMEI was modified?
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Shan1122 said:
LG V10 H90121j bricked after update which was successfully completed but phone does not turned on after that. I manage to unbrick through H90020w qfil and get access to update firmware screen. Now again every H901 kdz updated 100% but phone again bricks and not turning on. Please help me to restore my phone. I think I should unbrick with H901 qfil instead of H90020w. Please support.
Click to expand...
Click to collapse
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
last gspian said:
Dear shan, sould have read these forums before updating, I had the same misfortune when i updated my v10 through LG bridge, chances are you have a refurbished phone like me, where the motherboard is of a different version/country/carrier than the software, I have a korean f600l which i came to know after bricking my phone, the only ,method to revive it is to use the h90020w method but it will convert your tmobile to AT&t with fingerprint , vpn issues, unable to uninstall apps and in extreme cases like mine no radio, but atleast it works that fine for me, but if you want to make calls then dont go for it, first identify your board then ask for help from other senior members ,or others who have the same model . andn please do update if you are successful so that others may benefit from your method.
Click to expand...
Click to collapse
hey, sorry for late reply. Thank you for your answer. I got solution but as you said, with no Radio, I cannot make calls. my imei shows only 0-17. I think my imei totally erased. my methode was to debrick with file H90021w and then flash with H90021w.dz file. I convert kdz file to dz file by using LG_Firmware_Extract_v1.2.6.1. these files are available on internet. I got my phone back to life but without network. Phone is booting with AT&T logo and working fine other then network issue.
can anyone help me with network issue now?