I've just upgraded my unrooted LG G Pro 2(D838) to lollipop. Charging through my car usb adapter is now very slow since I updated. I have tried two chargers, both of which were charging at the full rate before, one of which is a genuine samsung charger - they both have over 2A output. The phone does recognise the charger as an AC charging source, but currently isn't charging above about 200mA.
I am using a Samsung AC charger at home which works as normal. I've had a bit of a look online and people are experiencing the same issue with the LG and other lollipop devices. One of the suggestions was to short the data pins on the usb cable, which I have done but this doesn't seem to have fixed the issue. If the phone is off it charges at the faster rate.
What I can't work out is why the charging speed is different between the samsung AC adapter and the car charger, when it detects both as an AC source? Is there some communication between the two, or are there any car chargers that will provide high speed charging that will work?
any suggestions are appreciated!
Here there the main aim is to show the charging time from various charger
10W, 15W, 35W etc... etc....
QC1.0, QC2.0, QC3.0 Chargers & Powerbanks
Am waiting for my new Pixel phone when i got i will fill this thread by all the tests
It doesn't seem to support qualcomm's quick charge even though the chip has qc 3.0 capabilities. It uses USB c fast charging with Google's 18w charger.
No chance it will support Qualcomm Quick Charge as that technology breaks USB-C requirements.
No quick charge....
Is there anything wrong with using a QC2 charger with the pixel? I have one in my car from my old S6 and just swapped the cables. Seems to charge quick and without issues but I hope I'm not doing any unseen damage.
I was charging with the main google's 18w charger using the 'otg' and the usb 3 cable and the results was from 0% to 100% ~1.20hrs and just removing the otg from the charge and using the usb type C on both side the charge from 0% to 100% was ~40min..
Hi,
I will get the phone in the next weeks and i'm still trying to find good 3rd party charger as pixel in my country is sold without the original one.
Any good 18W chargers that you know that might work?
Are there any aftermarket chargers that will work like the oem Motorola Turbopower chargers?
Pretty much any USB-C charger will work. I've used an old USB power brick with a USB-B -> USB-C cable, I've used my Acer R13's USB-C 45W power brick, and I've used my Choetech 55W 6-port charging station with a USB-C -> USB-C cable. They all work.
If you're looking for something that works with the X4's Turbopower, that's basically just Qualcomm Quick Charge 2.0 under a different name. My charging station is QC 3.0, which works with QC 2.0 devices, which works with this Moto X4. It charges quite fast.
If all you're looking for is a product recommendation, I'd check out this: https://www.amazon.com/Anker-Charge-Type-C-Charger-PowerPort/dp/B01CJ90J6O
crazyates said:
Pretty much any USB-C charger will work. I've used an old USB power brick with a USB-B -> USB-C cable, I've used my Acer R13's USB-C 45W power brick, and I've used my Choetech 55W 6-port charging station with a USB-C -> USB-C cable. They all work.
If you're looking for something that works with the X4's Turbopower, that's basically just Qualcomm Quick Charge 2.0 under a different name. My charging station is QC 3.0, which works with QC 2.0 devices, which works with this Moto X4. It charges quite fast.
If all you're looking for is a product recommendation, I'd check out this: https://www.amazon.com/Anker-Charge-Type-C-Charger-PowerPort/dp/B01CJ90J6O
Click to expand...
Click to collapse
Think our X4 needs QC3.0 for turbo charging. I have several QC2.0 chargers left over from my last phone and they do not charge this device at full speed. Also I'm pretty sure the original Motorola charger that came with it is QC3.0 according to what I've seen. But I've just ordered my first after-market charger (a RAVPower car charger, model VC007003) and can report back when it arrives later this week.
Looks like QC3.0 is the ticket
Here are screenshots of the charging rates using both my old QC2.0 and new QC3.0 chargers. The new one activates the "TurboPower connected" toast message, which the old one did not, and charges at a much faster rate. Gonna check out some QC3.0 wall chargers in the near future now.
Yes.
Anything from Qualcomm's certified list.
The original charger is 5V, 3A (15 Watt). However, most Qualcomm QC 2.0 chargers from 1 or 2 years ago ran at 12V, not 5V for fast charging so they don't support the combination of 5V 3A. It's the same thing that happened with the Nexus 5X which technically didn't have Qualcomm QC either, despite having a Qualcomm CPU. Forget the branding on the charger since it is too unreliable, and just find yourself something that can support 5V, 3A.
Wireless charging station for Moto x4?
Anyone know of a wireless charging station that works on the Moto X4? Got my x4 from Project Fi back in October and now it won't charge with a standard usb c cable. The phone and usb plug gets hot.
I'm using Pleson Fast Charge stand and CHGeek Wireless Charging Patch. The charging patch is kind of unsightly but I don't care, it charges "Turbo" fast.
Uhmmm
SynbiosVyse said:
The original charger is 5V, 3A (15 Watt). However, most Qualcomm QC 2.0 chargers from 1 or 2 years ago ran at 12V, not 5V for fast charging so they don't support the combination of 5V 3A. It's the same thing that happened with the Nexus 5X which technically didn't have Qualcomm QC either, despite having a Qualcomm CPU. Forget the branding on the charger since it is too unreliable, and just find yourself something that can support 5V, 3A.
Click to expand...
Click to collapse
That may explain why my Nexus 5x charger can't charge this Moto x 4 (it takes forever to complete a charge) but technically it still works
I've gotten turbo speeds from several different Quickcharge3 chargers from Anker. As a side benefit, they also do a good job charging my wife's iPhone.
For me this cable and this wall adapter do the trick just fine.
I just bought this wireless charger for my S20+ and my buds+, but when i plug the charger than came with my S20+ it just won't work. It didn't come with a cable or charger.
When i plug my 5 year old Sony charger, then the led blinks and it works and charges my S20+ or Buds+ wirelessly.
How can it work with a crappy charger and not with the brand new official one? Im pretty sure it is compatible with Samsung fast charger. Should I contact the store to replace it? Is this malfunction?
Also, I believe that charging with the regular Sony charger plugged to the wireless will take longer than the Samsung fast charger in the wireless, right?
If your 20+ came with the Superfast power brick charger, chances are the wireless charger is not compatible with your power brick they do work with a standard Samsung Fast Charger and any standard power brick but only slow charging
you can test this by seeing if you can borrow one from a friend
What is the problem guys>/
I only have a single available power outlet.
Currently, I have my SAMSUNG 15W Fast Charge 2.0 Wireless Charger Stand's stock wall charger (USB-C) plugged into that electrical outlet. I would like to replace that stock wall charger with something that has an extra plug (USB-A) to accommodate second fast-charging device... my Samsung Tab S6.
Could someone tell me which wall charger to get that would be compatible with both fast charging devices and charge the respective devices at their maximum speeds?