Ok I tried to flash "Mind Blown" kernel this yesterday morning and I haven't been able to mount internal or external storage ever since. I was running Axura 2.2.8.8 with the lag fix disabled and flashed Eugene's kernel and upon booting was stuck in a boot loop. I decided to try and run recovery mode but noticed that my sd card read no data. Upon an odin back to stock I realized that I could no longer mount internal nor external storgae and got the error in recovery mode I
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(Invalid argument)
E:Can't mount SDCARD:
Once my vibrant boots it says internal storage damaged and external says missing or invalid mount point. I flashed kernels, roms and virtually everything I possibly know how to do, and now I need the help of an absolute wiz. Guys i really need your help with this one, I'm totally lost.
hi, i got a problem here. i was wiping my data and system and i accidentally format /emmc . now i couldn't do anything. i cant mount usb storage also.
i got E:unable to open ums lunfile. tried mount sd card also cant.
pls help me!
Re-flash the ROM or restore that is if you made any backups, you don't have to wipe your data this will solve the problem.
Just wanted to post this in case anyone runs into this problem with the EVO 4G LTE. I believe I caused it by trying to "Factory Reset" via bootloader.
I was unable to format /sdcard via busybox per instructions in other threads. I was, however, able to format fine with Windows 7. The proper options are:
File System: fat32
Allocation Unit Size: 4096
Perform a quick format: Unchecked
The other settings can be left on default. Similar settings should work from other operating systems. After this, you can mount the /sdcard via your recovery and transfer/flash your downloaded rom.
Edit: must mount via recovery so it will show up in Windows.
Thank your for this post. I was trying to load a ROM and something errored out. Then, I tried to load it again but noticed that I had to following:
E:failed to mount /sdcard (invalid argument)
I was able to format in Windows 7 and then sucessfully load the ROM.
I was actually stuck in a boot loop prior to me trying to reformat the card. To fix that, I pressed down the power button for about 45 seconds and then it eventually stopped rebooting. I was then able to get into recovery.
Anyway, hope this helps someone.
failed to mount /sdcard (Invalid argument)
Hi there, just got the same error message up. I've tried formatting in bootloader (cwm), also twrp and neither allow the sd card to be seen on pc. I've used minitool partition wizard to partition on the pc following instructions from the xda site and that doesn't show up on the android system either way i format from pc it comes up on mounting from android as the "failed to mount /sdcard (Invalid argument)" error
Any other solutions anyone??
Thanks
Dan
Hi Guys,
I'm pretty new here and hoping you can all help me with unbricking my phone.
So I have a Samsung S3 I9300, with CM 13.0 installed, I am using CW recovery v2.7.0.0
I've installed many custom ROMS to this device over the past few years without a problem, each time formatting and wiping Dalvik cache etc..
Today my phone randomly rebooted and a message came up that my phone failed to encrypt and it wiped all my data and that I had to reboot into recovery to perform a factory reset.
A bit random I thought.. So I rebooted into recovery and did a "reset to default" in CW.. this was successful, however I noticed some issues on the terminal screen...
Code:
E: Unable to find partition size for /boot
E: Unable to find partition size for /recovery
E: Primary block device /dev/block/mmcblk0p12 for mount point is not present!
E: Unable to mount internal storage
E: Unable to mount /data/media during GUI startup
E: Unable to mount /cache
Full SELinux support is present
E: Unable to mount /cache
E: Unable to mount /cache
E: Unable to mount /data/media/TWRP/.twrps when trying to read settings file
E: Unable to mount /data
Updating Partition details...
E: Unable to mount /efs
E: Unable to mount /data
E: Unable to mount /data
E: Unable to mount /cache
E: Unable to mount /system
E: Unable to mount /data
E: Unable to mount /preload
E: Unable to mount internal storage
I've tried to format but it shows failed.
I cannot install another ROM as both the internal memory and SD card both show 0MB
I've plugged the SD card into my computer and there are still files on the card.
I've had a look online and found that typing in a command into the terminal should fix it, however nothing happens..
I get an error that mmcblk0p12 does not exist.
Code:
mke2fs /dev/block/mmcblk0p12
Any help would be great! Although i'm pretty sure it's bricked
Cheers Guys!
Chris
Gizzy00360 said:
Hi Guys,
I'm pretty new here and hoping you can all help me with unbricking my phone.
So I have a Samsung S3 I9300, with CM 13.0 installed, I am using CW recovery v2.7.0.0
I've installed many custom ROMS to this device over the past few years without a problem, each time formatting and wiping Dalvik cache etc..
Today my phone randomly rebooted and a message came up that my phone failed to encrypt and it wiped all my data and that I had to reboot into recovery to perform a factory reset.
A bit random I thought.. So I rebooted into recovery and did a "reset to default" in CW.. this was successful, however I noticed some issues on the terminal screen...
Code:
E: Unable to find partition size for /boot
E: Unable to find partition size for /recovery
E: Primary block device /dev/block/mmcblk0p12 for mount point is not present!
E: Unable to mount internal storage
E: Unable to mount /data/media during GUI startup
E: Unable to mount /cache
Full SELinux support is present
E: Unable to mount /cache
E: Unable to mount /cache
E: Unable to mount /data/media/TWRP/.twrps when trying to read settings file
E: Unable to mount /data
Updating Partition details...
E: Unable to mount /efs
E: Unable to mount /data
E: Unable to mount /data
E: Unable to mount /cache
E: Unable to mount /system
E: Unable to mount /data
E: Unable to mount /preload
E: Unable to mount internal storage
I've tried to format but it shows failed.
I cannot install another ROM as both the internal memory and SD card both show 0MB
I've plugged the SD card into my computer and there are still files on the card.
I've had a look online and found that typing in a command into the terminal should fix it, however nothing happens..
I get an error that mmcblk0p12 does not exist.
Code:
mke2fs /dev/block/mmcblk0p12
Any help would be great! Although i'm pretty sure it's bricked
Cheers Guys!
Chris
Click to expand...
Click to collapse
Did you have any success with this, Chris?
This sounds like what happened to my I9300 on CM12.1. It just froze and only rebooted to Samsung logo and stayed there.
When in TWRP recovery, there's just no access to internal memory or SD card.
The terminal mentions a lot of "E: unable to mount /data", /cache, /system, storage, etc
Most TWRP options fail to do anything, because of not being able to access partitions.
No factory reset, no wipes, no installing img's. When rebooting to system, it warns about no OS being installed.
Downloading a stock firmware now to see if it flashes via ODIN, but I don't have high hopes for it.
Does anybody know what would cause this? Or is it just bricked now?
petitgregory said:
Did you have any success with this, Chris?
This sounds like what happened to my I9300 on CM12.1. It just froze and only rebooted to Samsung logo and stayed there.
When in TWRP recovery, there's just no access to internal memory or SD card.
The terminal mentions a lot of "E: unable to mount /data", /cache, /system, storage, etc
Most TWRP options fail to do anything, because of not being able to access partitions.
No factory reset, no wipes, no installing img's. When rebooting to system, it warns about no OS being installed.
Downloading a stock firmware now to see if it flashes via ODIN, but I don't have high hopes for it.
Does anybody know what would cause this? Or is it just bricked now?
Click to expand...
Click to collapse
Hey there,
Nope the cmd I found on-line I found (above) didn't work.
Its currently just stuck on the Samsung splash screen and fails to do anything.
Gizzy00360 said:
Hey there,
Nope the cmd I found on-line I found (above) didn't work.
Its currently just stuck on the Samsung splash screen and fails to do anything.
Click to expand...
Click to collapse
Ah well, mine seems dead too. The recovery doesn't work anymore, only download mode, but ODIN can't get anything on it...
I think the main storage just died.
petitgregory said:
Ah well, mine seems dead too. The recovery doesn't work anymore, only download mode, but ODIN can't get anything on it...
I think the main storage just died.
Click to expand...
Click to collapse
Damn, I dunno what happened.. My CM was a nightly though, SO I can only assume it was unstable.
Just bizarre how my phone rebooted and gave the message that it was unable to encrypt the device and needed to be factory reset.
Gizzy00360 said:
Damn, I dunno what happened.. My CM was a nightly though, SO I can only assume it was unstable.
Just bizarre how my phone rebooted and gave the message that it was unable to encrypt the device and needed to be factory reset.
Click to expand...
Click to collapse
I was running a quite stable CM12.1 version for a couple of months now. Only had two reboots all this time.
petitgregory said:
I was running a quite stable CM12.1 version for a couple of months now. Only had two reboots all this time.
Click to expand...
Click to collapse
I had a few reboots when it was working, then it just suddenly bricked my phone
Sounds like the eMMC brickbug. You need to get the eMMC replaced. All of you that face the problems.
Well, after four years my S3 was getting very slow. It was bearable with CM, but I decided to say farewell now.
Also, my microphone was busted when I dropped it at some point, so I could only call with a headset anyway.
It's not worth replacing I think, time to move on
The same happened to my Beelink GT1 S912 9377 TV-box (after failed OTA update). Will check eMMC brickbug (from TWRP) ...
Hi all.
I'm trying to make a last backup of the stock Android of my Swift 2x before flashing LineageOS. But TWRP (version 3.3.0-0) Seems unable to use the /data partition. I got various messages like:
Could not mount /data and unable to find crypto footer.
Failed to mount '/data' (Invalid Argument)
I tried to format the partition: Wipe -> advanced wipe -> repair or change filesystem -> change filesystem -> ext4 but it didn't change anything.
What's wrong? What can I do?
Thanks a lot for any hint.
bumping this thread as I also ran into this issue.
When using TWRP, the data and system partitions can't be mounted. they also show up as being 0mb in size.
Because of this, no backups can be made and a full system wipe also yields errors.
What I did was change the filesystem to ext2 and then change it back again to ext4.
Doing this at least allowed me to flash crdroid, but making backups still doesn't work.
Whenever i go into TWRP again, it's the same thing again: unable to mount and partitions show up as 0 mb in size.
Anyone know what's causing this?
Wileyfox encrypts there data when you factory reset your device or after youve rooted your device .To get around this you need to do a factory reset using stock recovery once thats done then turn off the device. Then using minimum adb and fastboot type (fastboot boot twrp.img) that will boot your already installed twrp now erase data internal storage etc you'll notice you can finally delete stock os youll see internal storage is showing mbs available again etc worked for me perfectly.