Android 9.0 ROM come? - Xiaomi Redmi Note 4 Questions & Answers

Is this ROM true?
https://androidfilehost.com/?fid=890129502657592149

well, there is only one way to find out.
(flash it).

Fake, I brushed.

This one has the flashing / brushing script:
https://androidfilehost.com/?fid=673956719939829481

twrp 3.2.1 error 6?

Screenshot please

Tenshou170 said:
This one has the flashing / brushing script:
https://androidfilehost.com/?fid=673956719939829481
Click to expand...
Click to collapse
How do you mean by brushing? Can it actually be flashed successfully?

Tenshou170 said:
This one has the flashing / brushing script:
https://androidfilehost.com/?fid=673956719939829481
Click to expand...
Click to collapse
It seems that it gives error 6 on TWRP. Will inspect the system and also the flashing/brushing script later.
---------- Post added at 01:57 PM ---------- Previous post was at 01:56 PM ----------
dustmalik said:
How do you mean by brushing? Can it actually be flashed successfully?
Click to expand...
Click to collapse
Brushing is equivalent of flashing, but for Chinese people. In other word, brushing means flashing, but in Chinese.
---------- Post added at 02:43 PM ---------- Previous post was at 01:57 PM ----------
I have a some mixed news, good and also bad.
The good news is, the "system.new.dat.br" file is indeed Android P.
But the bad news is, the person who made the ZIP, doesn't know how to port Treble ROM.
He just copy-pasted the Full fastboot image of Pixel 2 XL, which contain the file of the fastboot & bootloader for Pixel 2 XL only to run those and also android on it. Which will brick our phone.
Also, he messed up with the scripts.
So, I recommend to ignore all of @IkerST's Android P releases.

Tenshou170 said:
He just copy-pasted the Full fastboot image of Pixel 2 XL, which contain the file of the fastboot & bootloader for Pixel 2 XL only to run those and also android on it. Which will brick our phone.
Also, he messed up with the scripts.
So, I recommend to ignore all of @IkerST's Android P releases.
Click to expand...
Click to collapse
I don't really it would be a brick, just error in TWRP or something similar but not a brick. Other than that, the mounting point of system is also wrong.

The rom is mine, I got a mess in my google cloud and used the taimen build instead of mido (wich isn't building), also the zip file isn't flasheable, it won't work on this device, and I recommend you to not try to install any builds I upload until I post them properly on xda.
Any mod please close this thread

IkerST said:
The rom is mine, I got a mess in my google cloud and used the taimen build instead of mido (wich isn't building), also the zip file isn't flasheable, it won't work on this device, and I recommend you to not try to install any builds I upload until I post them properly on xda.
Any mod please close this thread
Click to expand...
Click to collapse
Hey, at least you tried

Tenshou170 said:
This one has the flashing / brushing script:
https://androidfilehost.com/?fid=673956719939829481
Click to expand...
Click to collapse
***abcd

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gtrmdhn said:
Screenshot please
Click to expand...
Click to collapse

Jishan Ali said:
Click to expand...
Click to collapse
Oops, it's broken.

When we get Android 9 for moto e2 surnia device?

If your phone has treble rom and treble twrp
Go to
https://forum.xda-developers.com/redmi-note-4/how-to/experimantal-android-p-dp3-t3817446

Related

Need some advice on upgrading

Currently I'm on a discontinued ROM SkyFall which works fine. I've used xposed to customize to my liking. It's a 1.58.502.1 base rom. What would be the advantages to upgrading to a 4.4.3 rom or higher based rom like Sky Dragon? Will I see enough improvements or additions to warrant the hassle of backing up everything and starting fresh? Any thoughts appreciated. P.S. Only talking about stock roms, not interested in any others.
Well I was using Viper One and missed the feel of my Nexus 5 so I to chose Skydragon and its definitely worth it.here is some pics of the Skydragon version I run and a pic of how small the System is .simple and smooth.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Oh and I'm on the same firmware base
Well there is a sinless sense version, but I'm not sure if its been updated lately..I'm pretty sure you'd need to update your firmware though
---------- Post added at 04:45 AM ---------- Previous post was at 04:44 AM ----------
this is InsertCoin (Sense)
http://forum.xda-developers.com/showthread.php?t=2704539
Here's Sinless (Sense)...
http://forum.xda-developers.com/showthread.php?t=2722578
jxcorex28 said:
Well there is a sinless sense version, but I'm not sure if its been updated lately..I'm pretty sure you'd need to update your firmware though
That's the main issue. I've been looking at the international roms but someone mentioned that they don't play well with our radio. Now that 4.4 is out I really want to upgrade my firmware but it looks daunting according to the forums. I really need a good guide to walk me through. I've read a few guides in the international forums but they are a little vague. I'm s-off and could go super cid if needed. Do I just download a firmware off the forums and fastboot flash or is there more to it?
Click to expand...
Click to collapse
I just flashed the T-Mobile L24G radio and my data is doing great.
S-OFF and Supercid required
Radio link
http://forum.xda-developers.com/showthread.php?t=2736921
http://forum.xda-developers.com/showthread.php?t=2824048
Take a look at the above link. The links created by Skulldreamz...He doesn't have the latest .7 firmware included though. I'm sure he'd be able to help you get it. With these zips (included on the 1st page). The easiest and most hassle way of flashing these firmware zips is naming the zip (0P6BIMG.zip), and flashing while in boot loader mode...you can also remove the contents of other firmware zips. Using a file explorer such as ES or Solid Explorer, delete the recovery .img and boot.img. then rezip the file,rename to 0P6BIMG, and flash in bootloader
---------- Post added at 11:55 PM ---------- Previous post was at 11:48 PM ----------
You should ask skulldreamz about the tmobile firmware he's included in his thread. Skulldreamz removed the recovery.img from those zips (I believe). If you had a custom revovery, then you flashed a firmware zip that hadn't been modified and still contained the recovery.img. you could have unexpected results. If you flash a firmware zip like that you have to fastboot flash another recovery omg after you flash the firmware zip. You're on Tmobile, so it's best to ask skulldreamz,mike1986, or sneakyghost as those guys are more knowledgeable on firmwares
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
Do not flash AT&T firmware on a T-Mobile phone. I do not know if having s_off alone will work. I don't know what would happen, but I'm sure nothing good would happen...ask the guys I mentioned in my previous replies...
Flashed ROM and radio and have no issues at all
Nice...did you find T-Mobile firmware ?
jxcorex28 said:
Nice...did you find T-Mobile firmware ?
Click to expand...
Click to collapse
Who are you asking ?

Vivo Y55. We need developer in vivo y55 please.

Hey guys, Im am VIVO Y55 user. We have no developer so we do not know how to root this phone,flash custom rom,custom recovery. Please we need you. Thanks.
Vivo Y55 user.
me go work
Yes please! Update us here
Please made twrp for vivo y55
qiurigao said:
me go work
Click to expand...
Click to collapse
How to root vivo y55l ?
genzoy said:
How to root ?
Click to expand...
Click to collapse
需要解释,我试过fastboot erase aboot结果手机砖了,说明aboot分区是可擦写的,我下载了8937源码尝试编译出了aboot但是systenimage无法编译
---------- Post added at 03:08 AM ---------- Previous post was at 03:07 AM ----------
make: *** 没有规则可以创建“out/target/product/msm8937_32/dex_bootjars/system/framework/arm/boot.art”需要的目标“out/target/common/obj/JAVA_LIBRARIES/com.qti.dpmframework_intermediates/javalib.jar”。 停止。
How to root vivo y55l ??
Recovery.img.dtb
Not found..please help.
bootloader unlocked !!!!
genzoy said:
How to root vivo y55l ??
Click to expand...
Click to collapse
https://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
---------- Post added at 02:53 AM ---------- Previous post was at 02:51 AM ----------
genzoy said:
bootloader unlocked !!!!
Click to expand...
Click to collapse
how unlock bootloader?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There's a way I guess, judging that we can flash a ROM via QcomDloader. We just simply need to replace the recovery.img and flash it. But there's no one compiling a TWRP for Y55.. If we can do that, we might get a TWRP in our Y55 without unlocking bootloader. This is similar to the Xiaomi MiFlash, flashing custom rom without unlocking the bootloader.
morizuki said:
There's a way I guess, judging that we can flash a ROM via QcomDloader. We just simply need to replace the recovery.img and flash it. But there's no one compiling a TWRP for Y55.. If we can do that, we might get a TWRP in our Y55 without unlocking bootloader. This is similar to the Xiaomi MiFlash, flashing custom rom without unlocking the bootloader.
Click to expand...
Click to collapse
You are wrong in the vivo start mechanism, there is a safe start program, do not unlock can not start custom rec
qiurigao said:
You are wrong in the vivo start mechanism, there is a safe start program, do not unlock can not start custom rec
Click to expand...
Click to collapse
Well I'm just throwing some ideas. I didn't say we can, I just said we might. If that's the case then, I think there's Y55 might be a fool proof anti-custom rom/recovery
morizuki said:
Well I'm just throwing some ideas. I didn't say we can, I just said we might. If that's the case then, I think there's Y55 might be a fool proof anti-custom rom/recovery
Click to expand...
Click to collapse
yes is goot REwork root
View attachment 4139277
View attachment 4139278
Sucses ?
genzoy said:
Sucses ?
Click to expand...
Click to collapse
no
genzoy said:
Sucses ?
Click to expand...
Click to collapse
https://github.com/qiurigao/vivo_y55
qiurigao said:
https://github.com/qiurigao/vivo_y55
Click to expand...
Click to collapse
Bst dongle ?

Revert to OxygenOS 3.1.0 from HydrogenOS 2.5.1/OxygenOS 3.5.5 made easy

Here is the solution for you guys who have flashed HydrogenOS 2.5.1 or OxygenOS 3.5.5 and want to revert to OxygenOS 3.1.0:
1-Flash HydrogenOS 2.5.1/OxygenOS 3.5.5 and back up it via twrp recovery
2-Download this Nandroid Backup package: https://mega.nz/#!UUUThSqb!ySGhPUYIP6gjPY_M_c9nTvQ3LMhk07LRsCd1LqE5sEE
3-Extract it and put it in the same folder as your twrp back up(Put it where you see the date)
4-Boot to recovery and make a full wipe
5-Restore the Nandroid Backup that you have downloaded above
6-Reboot and Enjoy
With this you will have zero issue. No IMEI2 shows 0 problem, no signal drops, no issue at all.
Just make sure you strictly follow the instruction
Don't forget to press my thanks button
Note: That's not something I just imagine. It's something I did personally and shared it with you.
Tested and worked also for reverting from OxygenOS 3.5.5 to OxygenOS 3.1.0
Thx for the guide, but can I use CM 14.1 after following this guide?
Without any random reboots and drops?
Cryer said:
Thx for the guide, but can I use CM 14.1 after following this guide?
Without any random reboots and drops?
Click to expand...
Click to collapse
Of course you can.
Yousvel said:
Of course you can.
Click to expand...
Click to collapse
Ty, but it does not work for me.
I full wiped the system and still got the wallpaper of shelf, anything else still wiped tho
And IMEI2 is still 0 :crying:
Cryer said:
Ty, but it does not work for me.
I full wiped the system and still got the wallpaper of shelf, anything else still wiped tho
And IMEI2 is still 0 :crying:
Click to expand...
Click to collapse
You have to do that prior to flashing H2OS.
Please, flash HydrogenOS, then follow the instructions
Yousvel said:
You have to do that prior to flashing H2OS.
Please, flash HydrogenOS, then follow the instructions
Click to expand...
Click to collapse
dosent work i did the instructions
With this guide, i will have old oxygen os modem on my oneplus 2?
levis007 said:
With this guide, i will have old oxygen os modem on my oneplus 2?
Click to expand...
Click to collapse
it worked for you?
Mikeyy233 said:
it worked for you?
Click to expand...
Click to collapse
I haven't tried it yet.. Just taking precautions.
levis007 said:
I haven't tried it yet.. Just taking precautions.
Click to expand...
Click to collapse
is it a hardware issue or software? i have to pay oneplus 103$ to get repaired.. i tried the intstructions in the post didnt work for me
Mikeyy233 said:
is it a hardware issue or software? i have to pay oneplus 103$ to get repaired.. i tried the intstructions in the post didnt work for me
Click to expand...
Click to collapse
Most probably software issue. Did you used that modem erase command ???
yes
---------- Post added at 02:47 AM ---------- Previous post was at 02:47 AM ----------
the camera wont load without IMEI 2?
---------- Post added at 02:55 AM ---------- Previous post was at 02:47 AM ----------
Should i pay them?
levis007 said:
With this guide, i will have old oxygen os modem on my oneplus 2?
Click to expand...
Click to collapse
Yes
Number 1 of the Instructions updated
Yousvel said:
Here is the solution for you guys who have flashed HydrogenOS and want to revert to OxygenOS:
1-Flash HydrogenOS and back up it via twrp recovery
2-Download this Nandroid Backup package: https://mega.nz/#!UUUThSqb!ySGhPUYIP6gjPY_M_c9nTvQ3LMhk07LRsCd1LqE5sEE
3-Extract it and put it in the same folder as your twrp back up(Put it where you see the date)
4-Boot to recovery and make a full wipe
5-Restore the Nandroid Backup that you have downloaded above
6-Reboot and Enjoy
With this you will have zero issue. No IMEI2 shows 0 problem, no signal drops, no issue at all.
Just make sure you strictly follow the instruction
Don't forget to press my thanks button
Note: That's not something I just imagine. It's something I did personally and shared it with you.
Click to expand...
Click to collapse
Quick question.. will it matter in the slightest if my SIM is in the phone or not?
It worked!!! It worked 100% as stated!!! SIM2 (which I don't use but tested earlier was dead) now it's working!!!! IT'S FIXED!!!!!!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
which h2os 2.5.1??
or older one
The only issue I'm having is this bizarre problem when I'm disconnected from WiFi my data signal defaults to H+ and not LTE.. I have to cycle airplane mode... It just won't stick to LTE ..
Sent from my ONE A2005 using Tapatalk
In step 1, which partition to backup?
gocke55014 said:
In step 1, which partition to backup?
Click to expand...
Click to collapse
I didn't change any if the default selections..
Sent from my ONE A2005 using Tapatalk

MIUI 9.7.11 Android Q released

I can not send outside links
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for posting, I guess you need to be here longer to post links? here it is:
http://bigota.d.miui.com/9.7.11/miui_CEPHEUS_9.7.11_50e56ce0f7_10.0.zip
I wonder if it has a desktop mode when connected to HDMI...
Cmon xiaomi.eu
Cook it
Cant wait for it
Thanks! Flashing right now :good:
EDIT: Could someone tell me how to flash? :silly: In recovery it says Zip Treble compatibility error... :|
edmondt said:
Thanks for posting, I guess you need to be here longer to post links? here it is:
http://bigota.d.miui.com/9.7.11/miui_CEPHEUS_9.7.11_50e56ce0f7_10.0.zip
I wonder if it has a desktop mode when connected to HDMI...
Click to expand...
Click to collapse
Is this the Chinese developer?
_MartyMan_ said:
Thanks! Flashing right now :good:
EDIT: Could someone tell me how to flash? :silly: In recovery it says Zip Treble compatibility error... :|
Click to expand...
Click to collapse
you need to remove the compatibility.zip inside the rom zip package (most likely)
Some change ou feature added?
Edit: I mean.. Android Q* feature.
Is anyone installed it ? Some screen shot please
is it possible someone could make it TWRP-ready.
So no problems with compability etc, just choose install zip and tadaa
i have flashed this rom right now. have to.delete compatibility.zip fromthe rom as said before. 1st thing I have notices, in the settings it says android 10 but when I presse the android version some times, a P appears...
Installed it
Nothing special
---------- Post added at 05:57 PM ---------- Previous post was at 05:43 PM ----------
And its china base
But i'd install over xiaomi.eu rom and i have all googles staffs
as this is xiaomi "official" is there a way to flash without unlocked bootloader? the "install update" from 3 dot "about phone" menu isnt there
Whats cons?
mautz001 said:
as this is xiaomi "official" is there a way to flash without unlocked bootloader? the "install update" from 3 dot "about phone" menu isnt there
Click to expand...
Click to collapse
Only if you come from China Stable, no other way
NunoRocha89 said:
i have flashed this rom right now. have to.delete compatibility.zip fromthe rom as said before. 1st thing I have notices, in the settings it says android 10 but when I presse the android version some times, a P appears...
Click to expand...
Click to collapse
what changes on android Q?
mautz001 said:
as this is xiaomi "official" is there a way to flash without unlocked bootloader? the "install update" from 3 dot "about phone" menu isnt there
Click to expand...
Click to collapse
Hello
Its a closed alpha/beta version of Q for testers i think. Users need to send bug report daily. So i think flashing this is not a good idea. (Need unlocked bootloader imo) Just wait for China Public beta
Is true . Waiting for public beta . This version have bugs . return back official eu MIUI 9.7.11 on android 9 .

[GSI Android 12][Twrp Flash able][For Your Devices]

Yes...you can do it...
What is needed?:
1.Device with twrp or any other installed.
What is working?:
1.Root access work.
2.Brightness slider work.
3.Auto Brightness work.
4.Gapps include.
5.Migrate work.
What is not working?:
1.Fingerprint lock is missing from setting.
2.your stroge is force encrypted...twrp cn cannot decrypted data...use pen drive or memory card to flash thing from twrp..
How to flash?:
1.Backup your data because You need to format data.
2.Download extract and rename it as system.img(from below link)
Generic System Image releases | Platform | Android Developers
developer.android.com
2.Download Gsi flasher.zip and system_resize.zip(From my post)
3.Keep system.img and Gsi flasher.zip and system_resize.zip in same location.
4.Boot into Twrp and Flash System_resize.zip.
5 Reboot into recovery and flash Gsi_flasher.zip.
6.Download vendor from below link and install it via Twrp.
a11-vendor-lancelot.zip
drive.google.com
7.Flash Magshik v23.zip for magshik support
8.Formats data.
9.Boot your device.
10.Flash auto brightness gsi.zip(from my post) through magisk to autu brightness support
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gonna flash it, hoping it goes well.
didn't like it that much as i had higher expectations
Applepear said:
gonna flash it, hoping it goes well.
didn't like it that much as i had higher expectations
Click to expand...
Click to collapse
It is only testing... don't take it as daily driver
New method is update...
Shas45558 said:
New method is update...
Click to expand...
Click to collapse
You can install it via recovery
Beta 2 is release....try new android 12
Shas45558 said:
Beta 2 is release....try new android 12
Click to expand...
Click to collapse
Will install, i think material you and wallpaper based theming is integrated in it, correct me if im wrong
Applepear said:
Will install, i think material you and wallpaper based theming is integrated in it, correct me if im wrong
Click to expand...
Click to collapse
Yes you are r8
Screenshot is added
can't flash vendor(( getting error1
Shas45558 said:
kerim9551 said:
can't flash vendor(( getting error1
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Look it works this work only with redmi 9(Lancelot and galahed)...
If your device is Lancelot or galahed and you get the error then plz send me screen shoot
Shas45558 said:
Look it works this work only with redmi 9(Lancelot and galahed)...
If your device is Lancelot or galahed and you get the error then plz send me screen shoot
Click to expand...
Click to collapse
I'm using lancelot. problem was that I was on modified chinese miui, first i flashed ancient rom, after that I was able to flash this GSI. Is there any way to flash gapps on this gsi, because i want to use it as daily driver? thanks in advance
kerim9551 said:
I'm using lancelot. problem was that I was on modified chinese miui, first i flashed ancient rom, after that I was able to flash this GSI. Is there any way to flash gapps on this gsi, because i want to use it as daily driver? thanks in advance
Click to expand...
Click to collapse
Downloaded the gsi with gapps including..
Their are two options... downloaded gsi what gms ...(first one)
Shas45558 said:
Downloaded the gsi with gapps including..
Their are two options... downloaded gsi what gms ...(first one)
Click to expand...
Click to collapse
thanks a lot

Categories

Resources