Hey there,
I would be grateful for any problem solving tips to get my phone back to booting up to my home screen, so far i have tried every option available in the bootloader menu but it just loops me back to the same screen. The OS is 1.02.771.1 it is unrooted same official software from HTC. I have found some similar problems were the suggestion was to install an RUU file, not very tech savvy but i know for sure my OS is very outdated, perhaps unbricking the phone and manually installing the OS upgrade would fix the problem??
Pls help me i can follow instructions but need advice, dont want do f***k up the phone any more than it is currently.
DaKemist115 said:
Hey there,
I would be grateful for any problem solving tips to get my phone back to booting up to my home screen, so far i have tried every option available in the bootloader menu but it just loops me back to the same screen. The OS is 1.02.771.1 it is unrooted same official software from HTC. I have found some similar problems were the suggestion was to install an RUU file, not very tech savvy but i know for sure my OS is very outdated, perhaps unbricking the phone and manually installing the OS upgrade would fix the problem??
Pls help me i can follow instructions but need advice, dont want do f***k up the phone any more than it is currently.
Click to expand...
Click to collapse
Hi send me your imei on private message , I will post here what you need .
Related
Sir,
can any one tell me how to restore my htc p3400i back to normal. i have a device HTC P3400i GENE100. i use a guide on this site of KRAZY_ABOUT i successfully install orefkov and after install that i upgrade my original ROM WM6.0 to cooked wm6.1 (by lemlon). after install the cook rom i get my device too slow so then i reinstall RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship.exe i was really dont know it was for old gene. after install it my HTC is restart and not booting up and not going into bootloader mode and i tried evey combination of key (camera+power button or vol+cam+power or press both "-" button and insert batt.)to go in bootloader mode.... PLZ Help me i m suffer with this problem.
http://forum.xda-developers.com/showthread.php?t=506467
now only gene jtag method can help u !
search for gene_jtag_restore_revised and u will find
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
amolji said:
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
Click to expand...
Click to collapse
install a new ROM thats it
PRoblem solved
Even my device is bricked because of this ROM
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
amit_nikharge27 said:
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
Click to expand...
Click to collapse
hi amit,
i am also finding the solution for this. but now i m sure i have only last way to restore this with JTAG method, so i m collecting information about this JTAG method, if i able to restore my GENE with this i will definitely create a full guide for new bee who are struggling with this problem...
so keep u r eye on thread.....
bye....///
Hey hi, guru,
did u managed to restore your device using JTAG method.
could you please share me the steps if you have resolved it.
any one need information on j-tag.....?coz i recovered my lost gene b4 6 months ago using this j-tag.....so simple.....
Why do people go around flashing ROM's blindly?? :angry:
It is clearly mentioned everywhere i read not to flash original ROM's without removing the radio parts..
Please don't flash a rom who contains IPL, SPL or GSM. It will brick your device. Sometimes in a irreparable way.
People should pay more attention to everything mentioned here..
Hi rony_z367,
b4 8 months i lost my mobile due to upgrading spl,but it was in warranty...
now my gene is working fine with cooked roms but still i want to know about J-Tag.
sry abt my english
It is the process of recovering the memory addresses of ur ARM where u can directly connected to the respected hardware & re-program that h/w with ur given addresses.....but its so risky.....finaly ur addresse comes to 00....
Actually i didn't understand it completely..
but thx for info..
the pleasure is all mine.....thnx......
Hi everybody,
I have an issue with my TFPrime (latest build JB 4.1.1, unlocked bootloader). I was trying to install CyanogenMod but I ended up messing a procedure and my device seems to be bricked
Let me explain : I followed the Urkel's fresh start procedure and made a spell mistake in the system.blob name. The procedure failed and now my device is stuck on the splashscreen though I can still access fastboot and the bootloader screen.
I tried to use IRC to fix it with people who know what they are dealing with but despite the helpful tips I got, the tab is still stuck and currently battery-low (it keeps rebooting I could'nt shut it down).
When I chose RCK in the bootloader menu I hava a unrecoverable bootloader error 0x00000000
When I chose Android "Cold booting linux / Signature match" and then it just freezes
I can use fastboot.
Do you think there's something I could do to try to fix it or should I buy a grave?
Any help would mean a lot to me,
Thanks for reading my post!
It's been two weeks, does nobody have the solution? Should I try somewhere else, any other forum that could help? I am quite desperate (and I feel stupid and ashamed)...
Hi, please you this thread http://forum.xda-developers.com/showthread.php?t=1514088
It seems you have 'brick 2'. Unfortunately this is a hard brick and the device can not be recovered sorry for the bad news
Thanks for your concern!
I'm not sure it's brick 2, I think it's more likely brick n°3 since I can still access fastboot. I'm losing hope to see it turn on normally again :'(
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
but my htc can not get to its recovery. just appears the android screen several times and nothing. plz help
shaheddj said:
but my htc can not get to its recovery. just appears the android screen several times and nothing. plz help
Click to expand...
Click to collapse
Really helps people who want to help you by describing what caused your issues. Typically though, you'll need to find an RUU from your carrier to flash while in bootloader mode.
Its my new set oonly been two months . suddenly this happens . tried sp tool process BT can't connect to PC. U see I can see only the bootloader then it can't take boot or get to recovery . the phn isn't rooted so I can't flash any custom ROM. Showed to a servicing shop he said it's basband had crashed. tried htcdev desire 616 source file .no fruit can't get any solve.
Can u please give me the link of that RUU and process , am really new at this.
I need help with my mediapad S8-301L i can only get it to the logo screen on boot. and if i plug it in to my laptop i can get it in to fastboot mode. is there a way i can recover this device using fastboot????
i had rooted it and installed twrp like i had before. but due to formatting and starting a fresh to installing skygo i found my self rooting it again this time the same method bricked my device.... any help would be loved thanks in advance...
:good::good::good::good:
M1 s8 301l
hi m8, did u manage to fix this issue? im currently experiencing the same thing with mine, its just sitting at The EE splash screen, i can access fastboot, but it will not flash the system.img located from the update file,
would love to find out if there was a fix to this, i can even find the original EE rom that came supplied with the device...
Did you solve this , mines bricked due to overheating n desperately need a list from /dev/block/platform/msmxxxxx/by_name
That way I can extract the update.app correctly
Any help obliged
Rgds