Hi
I have a chinese android phone, it displays "SUSAN" when it starts up and here are the techincals:
Development Device ID
J3RF-M3EP-6USW-6
MODEL NUMBER
M5
ANDROID VERSION
5.1
BASEBAND VERSION
SC7731
BUILD NUMBER
DW_X10_H2.0_GT022X_M5_BOE_QG_FL_V1.0_20171202
HARDWARE VERSION
HW_V2.0
I am trying to find ANY rom that will actually allow me to use the phone.
It has an Octa Core, 2GB ram, 32GB storage.
Problem is, the firmware that is installed at the moment will not allow me to install ANYTHING as it says there is not enough space.
I have done fill hardware resets and it still reports this. I have even put a 32GB Micros SD and set that to be the install location, and it still wont allow me to install anything.
The phone is already unlocked.
I have NEVER flashed a firmware before so please, make the instructions as idiot proof as possible.
Thank you in advance.
Dude, that phone is the classic sh*tty clone that dont have what they say, just use a sdcard and is done
Related
It's hard to me to actually find a whole lot of information so I'll just like you to the Tablet that I purchased. I know it is an AllwinnerA10 Boxchip processor speed runs at 1.2 GHZ. So basically when I first got it it was running fine, I attempted to flash an updated rom which ended up failing, so I decided to install a new recovery System. I do not recall the original recovery system, but what happened is I installed the wrong recovery system. I have an a10 and I accidentally installed a A13 Recovery System "version 6.0.2.8." instead of an A10 Recovery System. Basically the Recovery Mode is only partially functional due to it being programmed for an A10. It will not let me install/flash an android image and the screen flashes, it will also not allow me to mount files from my internal SD card, I believe that it will allow me to install from a external micro-sd. However, it needs to be charged at the moment so my memory is a little hazy on whether it allows me to. So lets assume that it doesn't allow me to do that for now. How would I go about fixing this problem, and unbricking my Tablet. Since I haven't made enough posts I am unable to send you a direct link. I can however give you some keywords so that it pops up when you are looking for it. It is from LightintheBox.com, it should be the 4th url on a google search.
DesireTab - Android 4.0 Tablet with 9.7 Inch Capacitive Touchscreen (16GB, 1G RAM, 1.2GHz, 3G, Dual Camera, HDMI Out,8000mA)
jrockfever said:
It's hard to me to actually find a whole lot of information so I'll just like you to the Tablet that I purchased. I know it is an AllwinnerA10 Boxchip processor speed runs at 1.2 GHZ. So basically when I first got it it was running fine, I attempted to flash an updated rom which ended up failing, so I decided to install a new recovery System. I do not recall the original recovery system, but what happened is I installed the wrong recovery system. I have an a10 and I accidentally installed a A13 Recovery System "version 6.0.2.8." instead of an A10 Recovery System. Basically the Recovery Mode is only partially functional due to it being programmed for an A10. It will not let me install/flash an android image and the screen flashes, it will also not allow me to mount files from my internal SD card, I believe that it will allow me to install from a external micro-sd. However, it needs to be charged at the moment so my memory is a little hazy on whether it allows me to. So lets assume that it doesn't allow me to do that for now. How would I go about fixing this problem, and unbricking my Tablet. Since I haven't made enough posts I am unable to send you a direct link. I can however give you some keywords so that it pops up when you are looking for it. It is from LightintheBox.com, it should be the 4th url on a google search.
DesireTab - Android 4.0 Tablet with 9.7 Inch Capacitive Touchscreen (16GB, 1G RAM, 1.2GHz, 3G, Dual Camera, HDMI Out,8000mA)
Click to expand...
Click to collapse
bump
Ok, so I'm an amateur Android root hacker and I was trying to install a DL'd Android file (volt) to swap external SD to internal phone staorage. I messed up. Now the tablet will not boot, as it gets stuck in the logo screen. I have tried ALL reset methods including recovery mode. When I try to select recovery mode, it only gives "NO" as as an option to factory reset. I have read online that I may be able to boot Android from an Micro SD card but this is where I get stumped. Can I use ANY 4.2.2 build, or is it device specific? If so, how do i find my build on a generic tablet such as mine? Here is what I can tell you about my tablet. It is a Tagital 9" A23 running 4.2.2. Here is title to the exact tablet on Amazon that may include some useful information. I can;t post the direct link because of my NEWB status.
Tagital® 9" Android 4.2.2 A23 Dual Core Dual Camera Tablet PC Play Store Pre-installed (Enhanced Version of A13)
As you can see, I'm only into the device for $75, but I would not only enjoy a working tablet, but also a solution to the original issue of partioned internal storage being all out of whack (502mb for device storage and then 4.8gb available, partitioned internal storage, not being used).
I apologize in advance if this is not the correct area to post, but I am a newbie. Please help!
Yikes. Sounds like you made a brick. I'd recommend looking for support via the manufacturer web site some have stock Roms for devices. Did you see if anyone had a thread here for that device? Good luck.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Crap...
janustarrangodlike said:
Yikes. Sounds like you made a brick. I'd recommend looking for support via the manufacturer web site some have stock Roms for devices. Did you see if anyone had a thread here for that device? Good luck. :e
Yeah, that's what I was afraid of...I just bought a duplicate tablet today, having it shipped overnight, do you think I can mount a recovery image from the new tablet and install on the first?
Click to expand...
Click to collapse
Crap...
Yikes. Sounds like you made a brick. I'd recommend looking for support via the manufacturer web site some have stock Roms for devices. Did you see if anyone had a thread here for that device? Good luck. :e
Yeah, that's what I was afraid of...I just bought a duplicate tablet today, having it shipped overnight, do you think I can mount a recovery image from the new tablet and install on the first?
just wondering...
i'm kinda stumped.. but if you can get into recovery I believe you may be able to either download a compatible rom several that sound like they would work on your device(search via Google) or maybe backup the new one you just bought and push those file to it(Maybe via adb)/ make a flashable zip and reinstall via sd... speculating ovi cause I don't have that style of tab...
Guys,
Yesterday my cousin, who lives in Korea, gave me his old LG-KU5900 smartphone.
Phone is good. Has 1 GB internal storage, has a 5.5 GB SD card along with it.
But problem is I cannot install WhatsApp on it because it when I try to install, it says that my current Android version is not compatible.
The current Android version on this phone is Android 2.2.2.
How can I be able to install WhatsApp on it and if not then can I upgrade it using some tool/procedure?
I have previously flashed/installed custom ROMS on my HTC set, but don't know how to do that for LG.
Can someone please guide. Many thanks in advance.
Hi
I have a chinese android phone, it displays "SUSAN" when it starts up and here are the techincals:
Development Device ID
J3RF-M3EP-6USW-6
MODEL NUMBER
M5
ANDROID VERSION
5.1
BASEBAND VERSION
SC7731
BUILD NUMBER
DW_X10_H2.0_GT022X_M5_BOE_QG_FL_V1.0_20171202
HARDWARE VERSION
HW_V2.0
I am trying to find ANY rom that will actually allow me to use the phone.
It has an Octa Core, 2GB ram, 32GB storage.
Problem is, the firmware that is installed at the moment will not allow me to install ANYTHING as it says there is not enough space.
I have done fill hardware resets and it still reports this. I have even put a 32GB Micros SD and set that to be the install location, and it still wont allow me to install anything.
The phone is already unlocked.
I have NEVER flashed a firmware before so please, make the instructions as idiot proof as possible.
Thank you in advance.
Hey,
Did u get anywhere with this, I have been looking around for a ROM / flashing procedure for one of these phones to make it usable.
Thanks.
---------- Post added at 01:02 PM ---------- Previous post was at 12:50 PM ----------
Found this
https://www.needrom.com/download/susan-m5-x8-x10/
Although I haven't tried to flash it yet.....
I just replied to another member What a strange coincidence. I have a friend of mine who owns a pawn shop and he always lends me "acquired" phones so I can analyze them and see if I want to buy them I have on my person the X8 5.1 susan. I'm Canadian and usually were pretty limited to our choices from providers. how a china phone got here? i've never even heard of this brand I don't even know what it is root would be an option. if I could know if I can get it to nougat. I started up with S6 then s7 and now I'm at the S8 (oreo) can't root and S8 Plus rooted nougat. I can't have an unrooted phone it's like driving a Porsche that's an automatic. Anyway so far my used with it has been very frustrating because it's it's not very touchscreen friendly at least mine is in and I don't know what version of Android experience it is but it's not very opening to the user. I've come to the conclusion that I think pixels are the way to go I just don't want to pay 1300 bucks for one because I know that I'll drop it in the sewer two days after I own it. he wants $80 for it.
OS flawed
there must be bugs in OS ... 8GB but access to 2% ???
susan M5 Phone
Did you get a solution for the susan M5 phone not having enough storage to download an app as I have the same problem. thanks
hogman_1 said:
Hi
I have a chinese android phone, it displays "SUSAN" when it starts up and here are the techincals:
Development Device ID
J3RF-M3EP-6USW-6
MODEL NUMBER
M5
ANDROID VERSION
5.1
BASEBAND VERSION
SC7731
BUILD NUMBER
DW_X10_H2.0_GT022X_M5_BOE_QG_FL_V1.0_20171202
HARDWARE VERSION
HW_V2.0
I am trying to find ANY rom that will actually allow me to use the phone.
It has an Octa Core, 2GB ram, 32GB storage.
Problem is, the firmware that is installed at the moment will not allow me to install ANYTHING as it says there is not enough space.
I have done fill hardware resets and it still reports this. I have even put a 32GB Micros SD and set that to be the install location, and it still wont allow me to install anything.
The phone is already unlocked.
I have NEVER flashed a firmware before so please, make the instructions as idiot proof as possible.
Thank you in advance.
Click to expand...
Click to collapse
Is a joke. It doesn't have 8 GB storage. It have 87 MB.
Same on RAM and CPU. It have 256 MB RAM and a 2 x @1.00 GHZ CPU (sc8825).
You can root this phone and put LINK2SD which moves your apps to sdcard.
Please keep the stock firmware (in this case, you can make a backup if you want to flash an firmware).
hogman_1 said:
Hi
I have a chinese android phone, it displays "SUSAN" when it starts up and here are the techincals:
Development Device ID
J3RF-M3EP-6USW-6
MODEL NUMBER
M5
ANDROID VERSION
5.1
BASEBAND VERSION
SC7731
BUILD NUMBER
DW_X10_H2.0_GT022X_M5_BOE_QG_FL_V1.0_20171202
HARDWARE VERSION
HW_V2.0
I am trying to find ANY rom that will actually allow me to use the phone.
It has an Octa Core, 2GB ram, 32GB storage.
Problem is, the firmware that is installed at the moment will not allow me to install ANYTHING as it says there is not enough space.
I have done fill hardware resets and it still reports this. I have even put a 32GB Micros SD and set that to be the install location, and it still wont allow me to install anything.
The phone is already unlocked.
I have NEVER flashed a firmware before so please, make the instructions as idiot proof as possible.
Thank you in advance.
Click to expand...
Click to collapse
Hi There,
at first I would recomand to Root.
Try king root, Frama root and so one (playstore or use xda search)
Then You can look after read and Write permissions in your Device.
That should solve your Problem.
Susan X5
Your smartphone has less than 30MB of system storage. I have my brother's Susan X5 and I checked it via commands.
adb shell
df
The image shows it. Any app you want to install has to have less than 30 MB size and you have to forcefully install it to your sdcard. Even if your sdcard is not full, since the system partition is less than 30 MB, it will be not able to copy it from system to sdcard.
Install everything in sdcard with the storage option in settings, "install everything on sdcard".
That Chinese smartphone is not even lollipop. You can tell it from the icons size and ui. The sdcard directory is write protected, so you cannot check it and test the scam. The texts saying Android version number and storage size are fake. If you can build a rom you can fake these numbers.
My brother bought from the Wish company. I have seen Wish adverts, the products they sell... well, they lack any common sense.
Now you know why.
I have a phone which displays susan and model is y6,can i get its flash rom?
Hello people, ive got the Huawei Mediapad T3 7" MODEL NO BG2-001 (3G/Wifi) edition
the problem is it only had 8GB, i have an SD cart inserted but i cant move or install apps to the SD card to safe space, i tried the following:
https://forum.xda-developers.com/an...wei-gr3-p8-lite2017-enable-adoptable-t3689850
And
https://www.fonepaw.com/memory/move-apps-to-sd-card-android.html
And
http://www.tomsguide.com/forum/id-3342138/move-apps-card-stylo-android-nougat.html
But all of them no use!
I tried Rooting but also that is not done successfull since i cant find a proper BOOT IMG
Annyone got suggestions/idea's how to get the job done?
This is a terrible device. I thinking they are idiots. It’s have only 1 GB ram and never stabiles work. It’s don’t useful. I want update a android lite version like android Oreo go. Maybe will speed work.