I replaced my screen. It did not display. The supplier provided me with a ROM and FlashTool. I flashed it and it worked. Then I tried to flash a new ROM. From there the phone is locked at logo. I have flashed with the original ROM provided by the supplier of the screen, but it does not work anymore. I have flashed another recovery (TWRP) which was correctly flashed. When trying to flash SuperSU_1.zip and SuperSU_2.zip, or Nougat ROM from inside TWRP, I get lots of red error messages saying something like "failed to mount ... " some directories. With the original recovery, it does not work neither (install ROM from sd, or through adb, nothing has worked so far). Any idea how to unlock?
Thanks
Best regards
Ibrahim
Related
Things went from bad to worst, I fixed my market update and had the utlities on the device i needed to i tryed flashing the Neutrino Rom.
After it was done it rebooted and said "failed to boot 2 starting rsd".
So I downloaded RSD Lite and found the unlock SBF which I applied. Now I can get into the FastBoot menu's and go to Android Recovery and try to do the back to stock option, it says it completes then reboots...
Then it just sits and sits and sits on the motorola Dual core logo.
Can someone please help me here. I cant seem to find any of my backups i made with system recovery or rom manager. I also didnt load RomRacers Recovery (which i just now noticed)
Any help is greatly appreciated.
So, did you unlock the bootloader before trying to flash the ROM?
Does it say "Unlocked" at the boot logo now?
Get back into fastboot and flash romracer's recovery and then try to mount the storage and get another rom on there.
SDRAKE101085 said:
Things went from bad to worst, I fixed my market update and had the utlities on the device i needed to i tryed flashing the Neutrino Rom.
After it was done it rebooted and said "failed to boot 2 starting rsd".
So I downloaded RSD Lite and found the unlock SBF which I applied. Now I can get into the FastBoot menu's and go to Android Recovery and try to do the back to stock option, it says it completes then reboots...
Then it just sits and sits and sits on the motorola Dual core logo.
Can someone please help me here. I cant seem to find any of my backups i made with system recovery or rom manager. I also didnt load RomRacers Recovery (which i just now noticed)
Any help is greatly appreciated.
Click to expand...
Click to collapse
i unlocked the bootloader after the update failed (i panicked) and yes it does say unlocked at the top now
Well, you mentioned you can get into fastboot so that's a start. You can try to flash a proper recovery and try to boot into recovery and see if you can mount the storage, or if you have a card reader you can just put a ROM on your sd card and then flash. If you can't get into recovery but you can get into fastboot you can flash a rom that way. You'll have to search for the procedure but I'm almost certain it can be done. If all else fails, you can install the unlocked "Full" SBF through RSD Lite, but it is not really recommended but should work.
SDRAKE101085 said:
i unlocked the bootloader after the update failed (i panicked) and yes it does say unlocked at the top now
Click to expand...
Click to collapse
Thanks so much. I got radracers on there and reflashed the neutrino rom again. Everything appears to be working. Now to just figure out the rest.
Thanks again.
Look tke the sd card and load the rom and google apps. Then go and fastboot wipe and re install the rom and try to boot honestly it just sounds like you got a corrupted rom
I have a slight problem with my phone right now. I got the great idea to try and build a rom just for myself in kitchen based off the Telus 1.15.661.11 base. Everything appeared to work correctly, I got my rom flashed and working fine, haven't had any problems with it besides a FC issue with the HTC Sense input but i just uninstalled it as i use swiftkey anyways.
The problem is I can no longer access TWRP, I can get into the bootloader fine just when i select recovery it shows the TWRP logo then goes to a black screen and then proceeds to boot into the system. I have no idea how to fix it and but here's what I've tried so fair:
-Reflashing the recovery via fastboot
-Flashing a rom via fastboot (Can't be done gives me some remote denied error, i assumed because its still s-on?)
-Reflashing boot.img via fastboot (Figured it was worth a attempt?)
-Trying to reboot into recovery (Same thing happened, went from black screen to boot. Also i should note I could not get the phone to reboot via adb but could via the cwm rom manager (I just used it to reboot nothing else))
-Factory Reset from bootloader (didn't appear to do anything)
The one thing I have not tried is an RUU, however this was because first off i had difficultly locating one (I had the link somewhere but lost it) and second I don't think there is one for Telus (Although i would assume an ATT one would work?). Also ill try to locate the rom that i flashed, and maybe someone would be able to look at it and see what went wrong. Any help/ideas would be greatly appreciated to try and help restore my recovery.
EDIT: So i ran the ATT RUU and it failed towards the end of the process and I went through the recovery process. Then i re locked and unlocked my bootloader and after that i went to reboot into recovery and it works again. So im not sure what happened but if anyone has some insight it would be nice to know for the future.
Ok guys, Heres what I do & what happens,
(model # C6833)
1- root device
2- install new boot kernel (adv-stock-v4) (( Even tried v5))
3- unlock bootlader (only had to do it the first time, bootloader stays unlocked)
4- install cwm/TWiRP
5- get into TWIRP or CWM & wipe as I should
6- install rom. (It wont install)
7- reboot
8- stuck @ sony logo. & then reboots,
9- reinstall stock rom
This happens every time I try to install a rom.
I also get the message before I reboot, no root, would you like cmw/twirp to fix it, I go with yes. & ive tryed no as well. no difference. Still get stuck @ Sony logo & get reboot loop.
Any ideas ?
Im not new at rooting & roming.
Hey, it sounds like you're installing NUT's dual recovery and are trying to flash a CM/AOSP based ROM? I didn't find it possible to flash non-Sony ROMs using that recovery, myself. What you need to do is to first flash the kernel (boot.img) from the ROM you're trying to flash. You can do this using fastboot with the phone set to fastboot mode. The FlashTool program comes with what you need, and there's a guide to using it in the development forum. The kernel contains the recovery (either CWM or TWRP), so after flashing that, you can boot to recovery and install any CM/AOSP ROM you wish.
Triflot said:
Hey, it sounds like you're installing NUT's dual recovery and are trying to flash a CM/AOSP based ROM? I didn't find it possible to flash non-Sony ROMs using that recovery, myself. What you need to do is to first flash the kernel (boot.img) from the ROM you're trying to flash. You can do this using fastboot with the phone set to fastboot mode. The FlashTool program comes with what you need, and there's a guide to using it in the development forum. The kernel contains the recovery (either CWM or TWRP), so after flashing that, you can boot to recovery and install any CM/AOSP ROM you wish.
Click to expand...
Click to collapse
I did the flashtool thing. ( I'll edit my post ) I did the boot.img & Im trying to use SlimRom. Everything seems to be fine until I try & install the rom. Then it goes to hell.
Btw, Slimrom is compatable.
So what's the actual error message you get upon installing a ROM?
Something like, installation canceled. could not install rom. It goes threw a few steps. gets a few things installed (or so it seems) & then it hangs & I get that message. I thought, at first, it may have been a corrupt download. But after a few times of downloading it. I kinda think its no longer that.
Have you tried another ROM? Someone else is also having boot trouble with Slim in its development thread.
No actually, I have not. I will soon though now. And report back. First I need a stock U.S. rom. Just in case. Cant seem to find one.
Been using a CE (Central Europe) based stock rom.
Dear fellow Android diggers,
I have encountered the strangest thing so far since i'm flashing custom roms. so i had flashed OwnRom with cwm 6.0.3 and it all went good until one day it crashed so bad that it got stuck at logo on startup. finally i have managed to enter recovery, but it gave the infamous "can't mount" errors: cache/recovery/command, and /log as well. i have tried to format every possible partitions, but it doesn't finish, it says that can' mount or open some partitions. i have also tried to flash a new and a different recovery as well, without success, it is still the same recovery. i yave even trie to flash a new recovery with fastboot, which said it was successful, but still nthe same recovery. i have also tried to flash different firmwares after wiping, including ownrom, other ones as well and still stuck at the lg logo. i have also tried to flash the original fw with different lg flashing tools, but they all gave errors. so now i'm out of options and holding a practically working but useless phone in my hands and i'd like to find some way to make it work. any help will be much appreciated. cheers
Hello. I own prestigio multiphone3450duo, its mt6582 based. I downloaded custom ROM for mt6582 devices from mtkroms site called PussyFapv4. And my problem is that I cant flash ported ROM, I was able flash trought CWM only original one I downloaded, and when I try flash ported, it says aborted. Even if I replaced only boot.img file. Cant. And with original one I am stucked on bootloop as well, I let for 12mins to boot up, but its like phone turn off and again turn on. First I get logo,then grey screen, then black as turned off and again logo screen. So where is problem, why I can flash only non-ported one? At least I thought it will work but nah :/...PS: I restored system, everything works, I can boot now to my stock rom , but there is still pussyfap logo at start of booting instead prestigio one. Its necessary to flash stock rom using sp flash tool, or that logo doesnt affect anything?