My xperia when i connect to the flash mode even if i disconnect phone from the usb it still keep geen led for another 15 sec then when i press power it still boot to flash mode
the same happen with the fast boot
I have to keep the volume+power for a 15 s then it boot normally is that a guaranty
phone is in the locked original boot loader simfree ->original condition
When i restart phone it start in the flashmode it does matter whether the usb is in or out
I flashed twice already but every time i couldnt exited and power up android i have to do the hard reset trick (battery) before it turn to the android
marcoplo said:
My xperia when i connect to the flash mode even if i disconnect phone from the usb it still keep geen led for another 15 sec then when i press power it still boot to flash mode
the same happen with the fast boot
I have to keep the volume+power for a 15 s then it boot normally is that a guaranty
phone is in the locked original boot loader simfree ->original condition
When i restart phone it start in the flashmode it does matter whether the usb is in or out
I flashed twice already but every time i couldnt exited and power up android i have to do the hard reset trick (battery) before it turn to the android
Click to expand...
Click to collapse
Could be something wrong with the volume keys! Try contacting the service centre.
yea that sound resonable
Hi there
I have recently been given a broken Sony Xperia Tablet Z. When the power button is pressed a red light flashes 3 times but nothing happens. When the vol+ and power is pressed nothing happens. When the vol- and power is pressed the red light flashes three times again.
Is there anything I can do to fix it?
Many thanks!
mustango said:
Hi there
I have recently been given a broken Sony Xperia Tablet Z. When the power button is pressed a red light flashes 3 times but nothing happens. When the vol+ and power is pressed nothing happens. When the vol- and power is pressed the red light flashes three times again.
Is there anything I can do to fix it?
Many thanks!
Click to expand...
Click to collapse
charge it for several hours, and then try to switch it on or flash with flashtool..
Rootk1t said:
charge it for several hours, and then try to switch it on or flash with flashtool..
Click to expand...
Click to collapse
Hi there!
I've had on charge for a while now and still nothing. Would I need to be able to get into Download mode to flash with flash tool?
Thanks!
After charging the tablet for several hours, do this.
Press vol up + power button and hold until white led blinks 3 times.
(This will make sure the tablet is properly powered off. If after a long period no 3 blinks of white led, then it might mean that tablet state is already off. Press and hold just the power button and see if white led will blink just once then let go power button. The Sony logo should follow. All this is to see if tablet can shut down or power up properly or not. If it cannot do even the basic, then I have no idea how to proceed. This is why I don't trust my important data's in the internal emulated sdcard. I prefer my data to be in removable microsd. If tablet becomes dead and cannot be switched on, then any data that is stored in the unremovable internal emulated sdcard will be trapped. )
If you are lucky, the white led blinks 3 times it means that the tablet can be properly shut down, then ..
Then, connect a usb wire to the tablet. Do not plug the cable to the pc yet. without pressing power button, plug the cable to the PC WHILE you press and hold vol up button.
If you get a blue led at the side of the tablet, it means your tablet can be put into fastboot mode.
Do this first. I believe that once the tablet can be put into fastboot mode, then the tablet can be restored by flashing a recovery boot loader.
If you cannot get the tablet into fastboot mode, then I do not have enough knowledge about how to proceed. You will need to bring it to a service center for repairs.
cphilip said:
After charging the tablet for several hours, do this.
Press vol up + power button and hold until white led blinks 3 times.
(This will make sure the tablet is properly powered off. If after a long period no 3 blinks of white led, then it might mean that tablet state is already off. Press and hold just the power button and see if white led will blink just once then let go power button. The Sony logo should follow. All this is to see if tablet can shut down or power up properly or not. If it cannot do even the basic, then I have no idea how to proceed. This is why I don't trust my important data's in the internal emulated sdcard. I prefer my data to be in removable microsd. If tablet becomes dead and cannot be switched on, then any data that is stored in the unremovable internal emulated sdcard will be trapped. )
If you are lucky, the white led blinks 3 times it means that the tablet can be properly shut down, then ..
Then, connect a usb wire to the tablet. Do not plug the cable to the pc yet. without pressing power button, plug the cable to the PC WHILE you press and hold vol up button.
If you get a blue led at the side of the tablet, it means your tablet can be put into fastboot mode.
Do this first. I believe that once the tablet can be put into fastboot mode, then the tablet can be restored by flashing a recovery boot loader.
If you cannot get the tablet into fastboot mode, then I do not have enough knowledge about how to proceed. You will need to bring it to a service center for repairs.
Click to expand...
Click to collapse
Rootk1t said:
charge it for several hours, and then try to switch it on or flash with flashtool..
Click to expand...
Click to collapse
Hi there!
Thank you both for your help! I can successfully get the device into fastboot mode.
When trying to enter flashmode the device flashes green then goes back to red.
Is there anyway of fixing the device?
Many thanks!
First thing you need is a recovery boot loader.
This link helped me but I use Ubuntu linux to install recovery boot loader into my Tablet z wifi. (I think it is also possible to do it in windows but you will need to install proper drivers)
Before this step, I also used Flashtool under windows 7 to unlock my bootloader. It is not difficult to use Flashtool and unlock bootloader but you must decide how important it is to you to backup TA before unlocking bootloader. In my case, I didn't feel I need SONY bravia engine, so I didn't backup my TA.
1. Use Flashtool to UNLOCK
2. Use Fastboot to install TWRP recovery loader
3. Download a Custom Rom (CM11/CM12/Omnirom./PAC) and save it to microsd
4. Boot into TWRP Recovery, clean data / cache partitions and flash custom rom from microsd
http://forum.cyanogenmod.org/topic/93490-soft-bricked-my-xperia-installing-cm/
To fix the problem, I downloaded CMB from http://forum.xda-dev...d.php?t=2463423. I unzip'd it, and used fastboot to install the boot.img: "sudo ./fastboot -i 0xfce flash boot pollux-windy/cmb/boot.img". Then I rebooted into TWRP recovery, and wiped/reformatted everything (including /data, which CWM wouldn't mount or wipe). I then sideloaded the CM11 ROM, booted back into TWRP, and installed CM11 from within TWRP. I ended up reflashing the CMB boot.img back on, even after installing CM11, and everything seems to be running great now.
Hi, same problem. Good answer was here : https://fr.ifixit.com/Réponses/Afficher/273255/black+screen+and+red+led+blinking+3+times#
In fact, my Aukey Quick charger did the thing: https://www.amazon.fr/AUKEY-Charge-Chargeur-Secteur-Samsung/dp/B01AHY1XAY
Hey Guys, so i never usually post because i can usually solve my own problems, but i think this time i've out done myself.
So last night when installing CM12.1 using TWRP my xperia Z2 everything was looking rosy. Then when I tried to turn the phone on to boot the first time it gave me just a single little vibe but would not turn on.
I've tried ALL combinations of button resets - Nothing
I've tried to re-flash a stock image using flashboot - Nothing - it won't recognise flash or download mode when i plug it into my computer while holding down volume down
I've tried holding the volume up button while plugging it into my computer to try FASTBOOT mode - Nothing - the blue LED on the top comes on, but neither OSX or WIN7 recognises anything has been plugged into the computer and it doesn't register on ./fastboot devices
So have I actually properly ****ed my device? Or am i missing something?
Any help would be so massively appreciated. Like i said, i usually never ask.
Did you try another cable? Blue LED is good, so fastboot mode should work.
When it would be bricked, there would be no blue LED...
Did you look into device manager on WIN7? Any device like "S1boot" or "Sony ADB Interface" there?
Sony logo showing up, when turning the phone on?
Try "fastboot reboot or "fastboot reboot bootloader" even though "fastboot devices" doesn't show up as anything (weird). It should boot back to bootloader and register your device. This happened to me once.
I think it's "fastboot reboot-bootloader" and i think it won't work...
Try
Try holding the power button and volume up button in until it vibrates. Then you should be able to hold power button and volume button to get to download mode. This works on mine when all else fails, lol.
Hi
My Z Ultra stays on android logo. Reset button don't work and power too. I tried reboot from adb (because its connecting normaly) and now stuck on black screen with red led. It's not charging, i left for like 2 hours and its only reboots to baterry symbol and reboot again. Can't get into flashmode and fastboot, red led appears and nothing else. What can i do?
Did u try power button + vol up for 10 sec? Then when he vibrate put charger in and go to bootloader for fastboot kernel or whatever you want
I just tried and it's don't vibrate
I think if I remember correctly red LED and no response is a motherboard/flex cable issue (could be wrong) this happened to me when I flashed the wrong software, I was still under return policy.
But yeah if flashtool isn't picking it up, you're SOL.
Hi!
M4 Aqua, E2303
Brief history, what I did before:
- On a full stock OS, first, I unlocked bootloader with fastboot oem unlock, which went through nicely.
- After that, I followed this thread to install custom recovery (twrp). Went through nicely (fastboot flash recovery recovery.img and fastboot flash boot boot.img).
- I was able to boot into recovery (twrp), and with the Install function, selecting Conceptify .zip it installed, rebooted.
- On the boot, the Conceptify gear logo was stuck spinning for a very long time. Then I just tried going into TWRP again to install Conceptify again, maybe for the second try it installs without the boot issue.
After this, I was no longer able to enter twrp recovery again. Okay, tried to flash the .img's again (boot and recovery), maybe I can at least get into TWRP recovery again, but no luck, despite both flash commands going through (both sending, writing were OKAY), without errors.
Current symptoms at this point:
- I still can get into fastboot (vol Up + usb plug in; LED red, then blue), and my PC can recognize the phone being in fastboot correctly, with serial number (in fastboot devices). It can still perform the flash/erase commands, but whenever I try fastboot reboot or fastboot reboot-bootloader, it doesn't reboot the phone. At this point, fastboot devices gives back a device in fastboot mode, but with a lot of question marks (?) instead of the serial number. On unplugging it, LED stays blue, like it is frozen or somthing. I kill the phone off with the power cutoff switch (next to microsd).
- holding just Power to turn on phone: Sony logo on the white background and is stuck. After a while I kill off with power cutoff.
- holding Power + vol Up, it vibrates once every 2 seconds or so. Nothing on screen, when I stop holding the buttons, stop vibrating. It however stays in a weird state, cause I can't get into fastboot for example (vol down + usb plug in; like I can do when it was powered off completely). I kill off with power cutoff.
- holding Power + vol Down: Sony logo on the white bkg, and stuck. After a while I kill off with power cutoff.
- tried the all-button hold: Power + vol Down + vol Up for 30 seconds, it was just vibrating every 2-seconds.
- flashmode with Flashtool: I downloaded a stock .ftf, loaded into FlashTool, but upon asking to connect the phone while holding vol Down, it can't detect it. The phone however lights red, then green on the LED light. Tried with both a new Flashtool (0.9.32.0, and a recommended older one as well: 0.9.18.6).
Is there something else I could try to get a working TWRP recovery again, and be able to boot into it?
Thanks for your help!
My M4 (E2312) have pretty much the same symptoms: can not boot anything and just stuck on SONY logo, Flashtool does not recognize phone in flashmode (Vol -), just fastboot. And using fastboot to flash system, boot, recovery shows finished processes but phone does nothing new. And phone does not response well to USB, only after a reset then it updates the status.
I have Pexo ROM v3, custom TWRP, SkyMelon 9 I think,Rooted SuperSU and Magisk( has conflicts so when I boot some pop up says X app has stopped working. When I install some more apps to use it was ok, then the pop ups show up more and more and then it decides to boot loop to the stage we are now.
I have tried install 0.9.33 and 0.9.23.1( somehow only 0.9.23.1 can install 3 drivers), Xperia Companion, Emma, ggsetup 3.2.0.1, Driver SONY so0104 (so0113 ADB interface- status show it cannot start),
So either it is the drivers on computer, the computer USB ports, the phone's software or hardware defects lead to software that caused it.
bdnlspam said:
Hi!
M4 Aqua, E2303
Brief history, what I did before:
- On a full stock OS, first, I unlocked bootloader with fastboot oem unlock, which went through nicely.
- After that, I followed this thread to install custom recovery (twrp). Went through nicely (fastboot flash recovery recovery.img and fastboot flash boot boot.img).
- I was able to boot into recovery (twrp), and with the Install function, selecting Conceptify .zip it installed, rebooted.
- On the boot, the Conceptify gear logo was stuck spinning for a very long time. Then I just tried going into TWRP again to install Conceptify again, maybe for the second try it installs without the boot issue.
After this, I was no longer able to enter twrp recovery again. Okay, tried to flash the .img's again (boot and recovery), maybe I can at least get into TWRP recovery again, but no luck, despite both flash commands going through (both sending, writing were OKAY), without errors.
Current symptoms at this point:
- I still can get into fastboot (vol Up + usb plug in; LED red, then blue), and my PC can recognize the phone being in fastboot correctly, with serial number (in fastboot devices). It can still perform the flash/erase commands, but whenever I try fastboot reboot or fastboot reboot-bootloader, it doesn't reboot the phone. At this point, fastboot devices gives back a device in fastboot mode, but with a lot of question marks (?) instead of the serial number. On unplugging it, LED stays blue, like it is frozen or somthing. I kill the phone off with the power cutoff switch (next to microsd).
- holding just Power to turn on phone: Sony logo on the white background and is stuck. After a while I kill off with power cutoff.
- holding Power + vol Up, it vibrates once every 2 seconds or so. Nothing on screen, when I stop holding the buttons, stop vibrating. It however stays in a weird state, cause I can't get into fastboot for example (vol down + usb plug in; like I can do when it was powered off completely). I kill off with power cutoff.
- holding Power + vol Down: Sony logo on the white bkg, and stuck. After a while I kill off with power cutoff.
- tried the all-button hold: Power + vol Down + vol Up for 30 seconds, it was just vibrating every 2-seconds.
- flashmode with Flashtool: I downloaded a stock .ftf, loaded into FlashTool, but upon asking to connect the phone while holding vol Down, it can't detect it. The phone however lights red, then green on the LED light. Tried with both a new Flashtool (0.9.32.0, and a recommended older one as well: 0.9.18.6).
Is there something else I could try to get a working TWRP recovery again, and be able to boot into it?
Thanks for your help!
Click to expand...
Click to collapse
Yes, I also tried installing conceptify but it doesnt work. At this point its better if you stick with the stock rom, remove as much bloatware as possible and consider it a phone because almost none of the ROMs here work stability wise, or they maybe stable but some features like display brightness or speakers dont work. So I recommend you install stock rom via flashtool and then unlock the bootloader via flashtool again and install twrp again. Also if possible try reinstalling the drivers for the phone in flashtool. Hope this works mate.
Not my name said:
Also if possible try reinstalling the drivers for the phone in flashtool.
Click to expand...
Click to collapse
Thanks for your answer!
Unfortunately, I still can't make Flashtool recognize my M4 as booted in flashmode. Tried installing the drivers with \Flashtool\drivers\Flashtool-drivers.exe , but choosing the "Flashmode drivers" option, it failed during the install (I guess cause there wasnt a connected device that supports it), tried both with phone being connected in flashmode (volDown + plug-inUSB), and phone disconnected as well.
bdnlspam said:
Thanks for your answer!
Unfortunately, I still can't make Flashtool recognize my M4 as booted in flashmode. Tried installing the drivers with \Flashtool\drivers\Flashtool-drivers.exe , but choosing the "Flashmode drivers" option, it failed during the install (I guess cause there wasnt a connected device that supports it), tried both with phone being connected in flashmode (volDown + plug-inUSB), and phone disconnected as well.
Click to expand...
Click to collapse
Can you try it on a Linux PC I guess?