[you can use this tool to solve brick problems https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279]
Hi everyone, I'm "new" on the forum. "New" because they are days looking for answers to repair my Honor 9...
After unlocking it, installed twrp and RRos 6.0 I made a mistake, I uninstalled the gapps from the system manually, and after restarting the phone, various error messages continued on terminated processes (com.google... stopped working).
I tried again to reinstall the gapps via twrp but nothing to do, after trying to reinstall the RRos (with full wipe), new error messages kept going out, but this time not only the gapps.. (trebuchet etc ...).
Trying several wipes and reinstallations of the RRos, I tried to go back to the EMUI 8.0, so I tried to install the European firmware via SD and folder DLOAD, but once I got to 5% the installation crashes.
Via fastboot I also tried to install the twrp again, but the recovery stock continues to appear.
Looking on xda and generally on the internet I have found various people with this problem and they have tried to solve with programs like DC-Unlocker or Phoenix, but they had locked bootloader or frp .. I from fastboot I have PHONE Unlocked and FRP Unlock.
I also tried to flash the img contained in the UPDATE.APP file, but nothing happens ... just recovery stock. Help please i am desperate :crying: and sorry for my english.
EDIT - 27/03/2018
-I solved many of the problems I had in this post, now I'm still in the twrp and I can not flash the stock firmware.
-I'm trying to format the microsd in exfat and then install update.app.
-I can not copy the 4.66GB update.app file to the MicroSD in exfat, fat or ext4 via twrp / PC. I will try with another SD reader.
-I formatted the sd in exfat and I managed to copy the dload folder, run the restore and no longer blocked at 5% (gave a 99% error). The system started and I went back to the b130 with nougat, now I try again to install the b120 to restore the captive keys. (trying again with hwota)
-Hwota worked, now with the b120 everything works correctly, now I'm looking for a way to restore OTA Updates.(I will try to install the b183)
-With the b183 ota works, but not the keys / flash. I will try to downgrade to b120, than reupdate to b183 without wipe anything .
-b120 keys working, update to b183 and not working again, I try update ota oreo and search for a kernel.
-Almost everything resolved! After switching from the b183 to the b360, I reunlocked the Honor and installed the kernel with the fix to the capacitive keys. Relock the phone but the Google Logo appears at boot, even after installing the stock kernel.
Kodex_99 said:
Trying several wipes and reinstallations of the RRos, I tried to go back to the EMUI 8.0, so I tried to install the European firmware via SD and folder DLOAD, but once I got to 5% the installation crashes.
Via fastboot I also tried to install the twrp again, but the recovery stock continues to appear.
Click to expand...
Click to collapse
If you were on oreo, it's normal the nougat service repair files don't work with dload.
You're still on RRos ?
oslo83 said:
If you were on oreo, it's normal the nougat service repair files don't work with dload.
Click to expand...
Click to collapse
Can I try with non-European firmware such as Russian or Chinese upgraded to Oreo?
oslo83 said:
You're still on RRos ?
Click to expand...
Click to collapse
No, I did several wipe and tried to restore other system.img
Kodex_99 said:
Can I try with non-European firmware such as Russian or Chinese upgraded to Oreo?
No, I did several wipe and tried to restore other system.img
Click to expand...
Click to collapse
To my knowledge, they are no oreo service repair firmware publicly available yet. So, for now, no flashing firmware with dload once on oreo.
You could use HWOTA8to8 or HWOTA8to7 or the translated russian TOOL from last febuary.
oslo83 said:
You could use HWOTA8to8 or HWOTA8to7 or the translated russian TOOL from last febuary.
Click to expand...
Click to collapse
I only find missing files
Honor 9 multitool eng (feb2018)
https://forum.xda-developers.com/hon...5#post75662105
oslo83 said:
Honor 9 multitool eng (feb2018)
https://forum.xda-developers.com/hon...5#post75662105
Click to expand...
Click to collapse
========================================================================================
Copying the firmware files to the SD card
Please wait ....
========================================================================================
adb: error: failed to get feature set: no devices/emulators found
unfortunately when I try to install the EMUI 8 (the one I had previously installed) from fastboot I get this error message..
Kodex_99 said:
Copying the firmware files to the SD card
Please wait ....
========================================================================================
adb: error: failed to get feature set: no devices/emulators found
unfortunately when I try to install the EMUI 8 (the one I had previously installed) from fastboot I get this error message..
Click to expand...
Click to collapse
You need to be in twrp or system to copy file from your pc to sdcard with adb.
oslo83 said:
You need to be in twrp or system to copy file from your pc to sdcard with adb.
Click to expand...
Click to collapse
The problem is just that... also flash system or twrp, I always get eRecovery, I can try to copy the files on sd from another system however (as I did previously with the dload) but erecovery stucks at 5%
Kodex_99 said:
The problem is just that... also flash system or twrp, I always get eRecovery, I can try to copy the files on sd from another system however (as I did previously with the dload) but erecovery stucks at 5%
Click to expand...
Click to collapse
Once in fastboot boot, what command did you typed to flash stock recovery ?
---------- Post added at 20:20 ---------- Previous post was at 20:20 ----------
Or twrp
oslo83 said:
Once in fastboot boot, what command did you typed to flash stock recovery ?
---------- Post added at 20:20 ---------- Previous post was at 20:20 ----------
Or twrp
Click to expand...
Click to collapse
As I had an official oreo, I used it "fastboot flash recovery_ramdisk twrp.img"
I have just discovered that I can not even wipe from the recovery stock :/
Good, maybe you're doing the key combination wrong:
https://4pda.ru/forum/index.ph...72246&st=800#entry55689846
---------- Post added at 20:27 ---------- Previous post was at 20:26 ----------
So you manage to boot to stock recovery or was it erecovery again ?
oslo83 said:
Good, maybe you're doing the key combination wrong:
https://4pda.ru/forum/index.ph...72246&st=800#entry55689846
Click to expand...
Click to collapse
404
oslo83 said:
So you manage to boot to stock recovery or was it erecovery again ?
Click to expand...
Click to collapse
I have Stock recovery with + button, eRecovery with normal system boot and Fastboot with - button
So, boot to fastboot and flash oreo twrp.
Then boot to twrp recovery like you would have done for booting to stock recovery.
---------- Post added at 20:37 ---------- Previous post was at 20:31 ----------
https://4pda.ru/forum/index.php?showtopic=772246&st=800#entry55689846
oslo83 said:
So, boot to fastboot and flash oreo twrp.
Click to expand...
Click to collapse
I flash it, but when I try to start it I always go back to the recovery stock...
Previously I had installed the twrp but I do not know why the stock returned after several wipes
Do again:
fastboot devices
Then
fastboot flash recovery_ramdisk twrp.img
Then
fastboot reboot recovery
Paste us your output.
What twrp do you used ? 0.2 or 0.3 ?
oslo83 said:
Do again:
fastboot devices
Then
fastboot flash recovery_ramdisk twrp.img
Then
fastboot reboot recovery
Paste us your output.
Click to expand...
Click to collapse
" PS C:\Users\Kodex\Downloads> fastboot devices
7BK0217B04002898 fastboot
PS C:\Users\Kodex\Downloads> fastboot flash recovery_ramdisk twrp.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (27144 KB)...
OKAY [ 0.689s]
writing 'recovery_ramdisk'...
OKAY [ 0.289s]
finished. total time: 0.979s "
unrecognized reboot command.
oslo83 said:
What twrp do you used ? 0.2 or 0.3 ?
Click to expand...
Click to collapse
Up to a few hours ago the 0.2, now the 0.3 but does not change anything...
Keep trying to boot to twrp recovery
---------- Post added at 21:03 ---------- Previous post was at 21:02 ----------
Usb must be unpgugged
oslo83 said:
Keep trying to boot to twrp recovery
Click to expand...
Click to collapse
nothing.. only stock recovery
oslo83 said:
Usb must be unpgugged
Click to expand...
Click to collapse
i tried this
PS C:\Users\Kodex\Downloads> fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.690s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.696s
Related
Hi,
I have bricked my Honor 5x after flashing custom recovery. This these the steps I followed:
1) Unlocked the bootloader
2) Flashed TWRP recovery
3) Flashed root
4) Tried to update OTA
Now the phone is stuck at boot screen. I can enter recovery by pressing volume down and power, but now is stock recovery. And I don't know what to do.
Can someone help me?
OK u can't OTA update with twrp AND U SHOULD try adb flashing twrp through fastboot and maybe restoring a nandroid if u have one if not there's some u can download around here
Hey, my phone is bricked too. How did you manage to flash adb during twrp. How did you restore the backup and where did you get it from?
Or could someone please explain to me how I can get back to stock. I saw one thread with the .app file, but there you had to go the setting or something, which I can't do.
I have twrp installed and I have the L21 version.
Ok, I figured it out. I took the backup and the instructions from this thread: http://forum.xda-developers.com/honor-5x/development/unrooted-stock-rom-t3308902
heinzwilli6 said:
Hey, my phone is bricked too. How did you manage to flash adb during twrp. How did you restore the backup and where did you get it from?
Or could someone please explain to me how I can get back to stock. I saw one thread with the .app file, but there you had to go the setting or something, which I can't do.
I have twrp installed and I have the L21 version.
Click to expand...
Click to collapse
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
I tried to do that too. But the problem was that my adb didn't recognize my phone. Of course I had everything installed.
When I unlocked the bootloader earlier, it worked. But there I had to enable USB debugging. When my phone was broke, I couldn't enable it. Maybe that's why?
However, my phone is working right now, so thanks anyway.
fixed
jperez1132 said:
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
Click to expand...
Click to collapse
I have a practically dead honor 5x, flashed a L-24 firmware on L-22. TWRP doesnt let me do anything, no touch functions work so i cannot restore my back up.
Fastboot commands on format /data and flash cust cust.img fail with the error "Remote: Command not allowed", bootloader is unlocked, pls help.....I need to flash back the default cust.img to get it back to normal
SOLVED: Downloaded the official firmware, placed the "dload" folder which contains the update.app in the root of the sd card, went into download mode on phone (vol up + vol dow + power) and the system installed the firmware automatically.....booted back into the stock system now, next will reflash TWRP and restore back up
nandakalyan said:
I have a practically dead honor 5x, flashed a L-24 firmware on L-22. TWRP doesnt let me do anything, no touch functions work so i cannot restore my back up.
Fastboot commands on format /data and flash cust cust.img fail with the error "Remote: Command not allowed", bootloader is unlocked, pls help.....I need to flash back the default cust.img to get it back to normal
SOLVED: Downloaded the official firmware, placed the "dload" folder which contains the update.app in the root of the sd card, went into download mode on phone (vol up + vol dow + power) and the system installed the firmware automatically.....booted back into the stock system now, next will reflash TWRP and restore back up
Click to expand...
Click to collapse
WORKED: update.app in dload folder WORKED !!! Thanks a lot
narengowda said:
WORKED: update.app in dload folder WORKED !!! Thanks a lot
Click to expand...
Click to collapse
Glad it worked! did you figure out what caused the issue?
jperez1132 said:
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
Click to expand...
Click to collapse
Is your fingerprint ID working good?
---------- Post added at 09:14 AM ---------- Previous post was at 08:46 AM ----------
fastboot flash cust CUST.img
target max-download-size: 254MB
sending 'cust' (196335 KB)...
OKAY [ 6.493s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 6.493s
Cant flash cust. How did you do that?
sad1996 said:
Is your fingerprint ID working good?
---------- Post added at 09:14 AM ---------- Previous post was at 08:46 AM ----------
fastboot flash cust CUST.img
target max-download-size: 254MB
sending 'cust' (196335 KB)...
OKAY [ 6.493s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 6.493s
Cant flash cust. How did you do that?
Click to expand...
Click to collapse
Yes, it is working perfectly.
Hi, sorry for hijacking a thread but I thought it'd be better than making a new one.
I did pretty much the same as the OP, unlocked the bootloader, flashed TWRP recovery, rooted and then stupidly tried to do an official update on the phone (I believe it was kiw-l21c432b140)
The phone is just now stuck at the boot screen, I can get into fastboot mode but cannot use ADB, says device isn't found no matter what I try. I also tried putting stock firmware on the SD card and going into download mode (EMUI) but it just says software install failed.. Any help appreciated, only got the phone today and have spent longer trying to fix it than I have using it..
Thanks!
tomblast66 said:
Hi, sorry for hijacking a thread but I thought it'd be better than making a new one.
I did pretty much the same as the OP, unlocked the bootloader, flashed TWRP recovery, rooted and then stupidly tried to do an official update on the phone (I believe it was kiw-l21c432b140)
The phone is just now stuck at the boot screen, I can get into fastboot mode but cannot use ADB, says device isn't found no matter what I try. I also tried putting stock firmware on the SD card and going into download mode (EMUI) but it just says software install failed.. Any help appreciated, only got the phone today and have spent longer trying to fix it than I have using it..
Thanks!
Click to expand...
Click to collapse
As long as you are able to boot into fastboot you still have hope
Are you able to get into TWRP? (Power + Vol up) If yes, download the L-21 stock rom in the file repository thread and flash it. In all likelihood, that will solve any corruption of system files. If not, read on.
Did you check if you have installed the ADB drivers? I am assuming it should have been installed considering you flashed TWRP, but better to check and reinstall. Device not found is usually a driver error. Alternatively, you can install HiSync, it refreshes and replaces the drivers needed for Honor 5X. Further to installing that, try adb fastboot commands and flash the stock recovery using the steps in this post:
http://forum.xda-developers.com/showpost.php?p=65659088&postcount=5
nandakalyan said:
As long as you are able to boot into fastboot you still have hope
Are you able to get into TWRP? (Power + Vol up) If yes, download the L-21 stock rom in the file repository thread and flash it. In all likelihood, that will solve any corruption of system files. If not, read on.
Did you check if you have installed the ADB drivers? I am assuming it should have been installed considering you flashed TWRP, but better to check and reinstall. Device not found is usually a driver error. Alternatively, you can install HiSync, it refreshes and replaces the drivers needed for Honor 5X. Further to installing that, try adb fastboot commands and flash the stock recovery using the steps in this post:
http://forum.xda-developers.com/showpost.php?p=65659088&postcount=5
Click to expand...
Click to collapse
When I do power and vol up I get EMUI recovery, not TWRP I put the stock rom on the SD card and tried to install it and it just says "Software install failed" and the only option is to shut the phone down again.
I had all the ADB drivers installed, will reinstall it all and see if it helps. When I run adb now and use the "adb devices" command it just says "List of devices attached" and doesn't show anything..
tomblast66 said:
When I do power and vol up I get EMUI recovery, not TWRP I put the stock rom on the SD card and tried to install it and it just says "Software install failed" and the only option is to shut the phone down again.
I had all the ADB drivers installed, will reinstall it all and see if it helps. When I run adb now and use the "adb devices" command it just says "List of devices attached" and doesn't show anything..
Click to expand...
Click to collapse
Oh then you have stock recovery, are you using the update.app provided by Huawei? Or using any ROMs/images posted here? It is possible that you may have a corrupted download, look up the Huawei site for downloads in the support section for your region and download the official update.app, try with that
nandakalyan said:
Oh then you have stock recovery, are you using the update.app provided by Huawei? Or using any ROMs/images posted here? It is possible that you may have a corrupted download, look up the Huawei site for downloads in the support section for your region and download the official update.app, try with that
Click to expand...
Click to collapse
It wasn't stock recovery before, after the phone updated it went back to stock and wouldn't boot. I downloaded the firmware from http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 and that's what I try to install through recovery and it says there's an error, a load of other texts flashes up before it says error but it's too quick to read. When I have better internet I'll re-download it in case it was corrupt. Thanks for your help, hopefully I can get it fixed as I only just got this to replace my old phone. Would be a shame to spend the money on it and have no use from the device.. Just wish the computer would detect through adb as I can get into fastboot easily enough.
tomblast66 said:
It wasn't stock recovery before, after the phone updated it went back to stock and wouldn't boot. I downloaded the firmware from http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 and that's what I try to install through recovery and it says there's an error, a load of other texts flashes up before it says error but it's too quick to read. When I have better internet I'll re-download it in case it was corrupt. Thanks for your help, hopefully I can get it fixed as I only just got this to replace my old phone. Would be a shame to spend the money on it and have no use from the device.. Just wish the computer would detect through adb as I can get into fastboot easily enough.
Click to expand...
Click to collapse
Sure, we all help each other
BTW, just to be sure, you using the single "Update.app" file, that runs into a couple of gigs or the extracted one? You can't flash extracted Update.app through stock recovery.
HiSync (the official Huawei tool) also provides an option to recover the phone, tried that?
nandakalyan said:
Sure, we all help each other
BTW, just to be sure, you using the single "Update.app" file, that runs into a couple of gigs or the extracted one? You can't flash extracted Update.app through stock recovery.
HiSync (the official Huawei tool) also provides an option to recover the phone, tried that?
Click to expand...
Click to collapse
It's the single one, about 2.66GB I believe, I tried the recovering through the Huawei tool and it says "Your device is not supported for system recovery".
tomblast66 said:
It's the single one, about 2.66GB I believe, I tried the recovering through the Huawei tool and it says "Your device is not supported for system recovery".
Click to expand...
Click to collapse
Oops! I am no techie, so am at the end of my wits, but thing I do suspect is a corrupted download, so if you can try downloading the file again from a stable connection and try is all I can think of. I've had this corrupted file thing quite a few times, so suggesting.
Stuck on "Powered by ANdroid". No recovery, only fastboot & rescue mode.
Hello,
I have Honor 7 PLK-UL00, and it is stuck on "Powered by Android" screen. The bootloader is unlocked. I can only go into fastboot or rescue mode. I cannot enter recovery or erecovery mode. I have tried flashing img files through fastboot of Android 6.0 B360, Android 5 B130 and Android 5 B788 but still no luck . The only option that seems left to me is flashing zip through fastboot. Does anybody here have the zip of stock or custom rom that i can flash through fastboot or anybody help me in making the zip.
The problem occurred after I had restored Modem, 3rdmodem, Dtimage, etc using "Partition Backup & Restore" app. Then I restarted, and this problem occurred.
Any help would be appreciated.
Thanks.
I had the exact same problem, i think its because modem partition is corrupted. I tried to extract modem.img from update.app and flash it by twrp dd command, its not working. so if some one with normal system can use dd if=/dev/block/mmcblk0p30 of=/sdcard/modem.img to dump a valid backup maybe it can be used to restore modem.
---------- Post added at 10:01 AM ---------- Previous post was at 09:09 AM ----------
crazyboy24 said:
Hello,
I have Honor 7 PLK-UL00, and it is stuck on "Powered by Android" screen. The bootloader is unlocked. I can only go into fastboot or rescue mode. I cannot enter recovery or erecovery mode. I have tried flashing img files through fastboot of Android 6.0 B360, Android 5 B130 and Android 5 B788 but still no luck . The only option that seems left to me is flashing zip through fastboot. Does anybody here have the zip of stock or custom rom that i can flash through fastboot or anybody help me in making the zip.
The problem occurred after I had restored Modem, 3rdmodem, Dtimage, etc using "Partition Backup & Restore" app. Then I restarted, and this problem occurred.
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
flash zip via fastboot wont work:
Y:\>fastboot update fb.zip
target reported max download size of 471859200 bytes
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
getvar:version-bootloader FAILED (remote: Command not allowed)
finished. total time: 0.002s
walterclozet-g said:
I had the exact same problem, i think its because modem partition is corrupted. I tried to extract modem.img from update.app and flash it by twrp dd command, its not working. so if some one with normal system can use dd if=/dev/block/mmcblk0p30 of=/sdcard/modem.img to dump a valid backup maybe it can be used to restore modem.
---------- Post added at 10:01 AM ---------- Previous post was at 09:09 AM ----------
Click to expand...
Click to collapse
Did you try flashing zip through twrp? Stock or custom?
My device is not even entering in recovery mode, not even TWRP or erecovery.
flash zip via fastboot wont work:
Y:\>fastboot update fb.zip
target reported max download size of 471859200 bytes
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
getvar:version-bootloader FAILED (remote: Command not allowed)
finished. total time: 0.002s
Click to expand...
Click to collapse
Can you upload fb.zip, so that the devs here can have a look and help.
crazyboy24 said:
Did you try flashing zip through twrp? Stock or custom?
My device is not even entering in recovery mode, not even TWRP or erecovery.
Can you upload fb.zip, so that the devs here can have a look and help.
Click to expand...
Click to collapse
1. i tried to flash custom zip rom(includes system.img, cust.img, boot.img) by twrp, not working.
2. i tried to extract system.img, cust.img, boot.img from stock 7.5.1 and 7.4.16 rom to replace custom rom files and flash by twrp, not working.
3. i can enter rescue mode by pressing vol+ vol- and power key let it boot twice usb should not be plugged. i can enter twrp or stock recovery(it will try to flash /sdcard/dload/update.app, but always fail at 5%)
4. i tired to flash 3rdmodem by twrp then flash stock recovery in fastboot mode, enter rescue mode, the ui now shows in english, but still fail at 5%.
5. i tired to extract 3rdmodem, modem use twrp command dd to ovewrite thoese partitions, not working.
6. i tired to pack modem.img to flashable zip using huawei update extractor, set it to /dev/block/mmcblk0p30, not working.
7. you can flash twrp in fastboot unplug usb cable then press vol+ vol- power, the phone will reboot, then screen bacame black, release those buttons, twrp should boot. it may take 30 seconds to enter.
https://drive.google.com/open?id=0Bw7c08wWGiqic2EyZ0R0QzAyR0E replace those img files.
i used dc phoenix tool to unbrick my phone, it boots, but sim can only use 2g network. if the card slot is set to be 4g one, card will be unable to enable or just wont detect sim card.
walterclozet-g said:
i used dc phoenix tool to unbrick my phone, it boots, but sim can only use 2g network. if the card slot is set to be 4g one, card will be unable to enable or just wont detect sim card.
Click to expand...
Click to collapse
Can you explain the steps in detail?
crazyboy24 said:
Can you explain the steps in detail?
Click to expand...
Click to collapse
first contact dc-tool for free test, then buy 15 credits from the website. then download dc-phoenix tool, reboot phone to fastboot, using method 1 with correct update.app(using the wrong one, it will fail when trying to flash). when it finished, if the phone can boot normally, use vol + vol- power to force flash from sd:\dload\update.app. then the phone will be ok. if method 1 didn't work, then you may try method 2, i tried that, but my phone won't work with gsm sim if set as 4g card, only cdma card can.
detail info: https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
if the phone is unbricked, they will require you to post a thread explaing how to unbrick the phone, send the thread link to them, you will get refund. i did that last week.
this is the thread i posted, you can see what i did. but remember try not to use method 2, you may lost serial number and gsm sim card may not be supported, i cant fix that.
after fastboot oem relock I can boot just to TWRP, PWR+Vol- will boot only to TWRP, also if if press reboot to bootloader in TWRP it boots into TWRP.
tried to install update.zip but throws errors
what state am I in an any idea how to recover?
I just wanted to unroot/relock
Thanks for any advise
Phone was working, unlocked and still rooted ?
Then, you decided to boot to bootloader to send a 'fastboot oem relock' command then you rebooted ?
Now you stated bootloader is replaced with twrp ?
When trying to flash random update.zip throught twrp, it gives you error message.
What's the problem here ?
---------- Post added at 15:16 ---------- Previous post was at 15:14 ----------
xequtor said:
what state am I in an any idea how to recover ?
Click to expand...
Click to collapse
...
oslo83 said:
Phone was working, unlocked and still rooted ?
Then, you decided to boot to bootloader to send a 'fastboot oem relock' command then you rebooted ?
Now you stated bootloader is replaced with twrp ?
When trying to flash random update.zip throught twrp, it gives you error message.
What's the problem here ?
---------- Post added at 15:16 ---------- Previous post was at 15:14 ----------
...
Click to expand...
Click to collapse
yes, was working, unlocked and still rooted
also yes to 'fastboot oem relock'
bootloader was TWRP before
not flashing random update.zip, just the b120.
I don't think trying to flash stock update.zip through twrp will achieve anything...
oslo83 said:
I don't think trying to flash stock update.zip through twrp will achieve anything...
Click to expand...
Click to collapse
I just extracted what's in update.app, recovery.img, boot.img etc, any idea what do I can or must flush?
I suspect the bootloader is locked, is there a way to unlock it from within TWRP, same as with fastboot oem unlock xxxxxxx ?
I'll assume you meant bootloader was twrp AFTER you locked bootloader and was still bootloader before you locked it ?
By the way, before you locked you're bootloader, you were on which firmware and wich region ?
oslo83 said:
I'll assume you meant bootloader was twrp AFTER you locked bootloader and was still bootloader before you locked it ?
By the way, before you locked you're bootloader, you were on which firmware and wich region ?
Click to expand...
Click to collapse
yes, correct TWRP was before I locked and it is still now.
I was on B120 EU
Ok, from your C432B120 you could try to restore the dload way to stock C432B130 with this file :
http://androidhost.ru/v5
(instructions are inside the file, and you will need a formated exfat >8GB sdcard)
Source:
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
oslo83 said:
Ok, from your C432B120 you could try to restore the dload way to stock C432B130 with this file :
http://androidhost.ru/v5
(instructions are inside the file, and you will need a formated exfat >8GB sdcard)
Source:
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
Click to expand...
Click to collapse
update.app in /sdcard/dload/ folder
volume down+ volume up+ power button
just did that, nomather which key combination I press, TWRP will boot
I did try to flash recovery.img in TWRP and now I'm in this, no more TWRP but ERROR MODE
soo, I guess I reach the point of no return just send for repair? I'm still under warranty
after draining the battery overnight as turning off did not work, I'm back to TWRP, TWRP appeared "magically" again
now the question ist, what can I flush in TWRP to go in to fastboot/bootloader again?
update:
forced to reproduce the ERROR MODE (see previous photo) with flashing boot.img and recovery.img in TWRP and could unlock bootloader again with:
c:\adb>fastboot oem unlock xxxxxxxxxx
< waiting for any device >
--------------- hier I pressed Vol- plus PWR to force reboot after that fastboot unlocked and had on the phone the question if I want to unlock------------------
...
(bootloader) The device will reboot and do factory reset...
OKAY [ 20.001s]
finished. total time: 20.021s
now I have to figure out what to flash with fastboot, anyone have an idea?
update2:
drained the battery, rebooted Vol- + PWR
and I'm in fastboot now, stange stuff happens here
but same question, what to flash with fastboot to get it working again?
update 3:
extracted recovery.img and recovery2.img from B120 FW and flashed with fastboot
then B130 from https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
now everything works.
the important thing was to unlock bootloader, even if you get the ERROR MODE you still have fastboot ad can lock/unlock the bootloader, see post #13
Congratulations
Hi there
I think my phone is briked. I wantet to downgrade my phone to the 108 version becaus there was android auto working.
So i tried to flash the System.img from the 108 Software. I tried 2 different:
http://pro-teammt.ru/firmware-database/?firmware_model=ANE-lx1&firmware_page=0
and the Middle east from the thread here.
Id did flash over fastboot, but after every start the Build number was still on the 112 Firmware.
So i tried the Trebel ASOP, RR and LOS. ASOP Booted but had only forceclose on every service. RR and LOS did not work.
Then i tried to flash the ramdisk, recovery, vendor kernel etc from the update.app from the 108 Firmware. No my phone is briked.
I tried to flash eveyrthing from the .112 updateapp from the Official thread but nothing happend.
Then i tried to flash every possible .img file from the .112 app but most of them gave "Error Command not allowed"
So here i Am. Bootlooping phone and i dont know what else to do.
Since the beginning i could flash every system.img but it still was on the 112 Build and suddenly it bricked. I cant get to the 112 Version back with flashing system.img because it bootloops. Same for Treble and the newest 126 Version or the old 108 Build.
The only thing booting is ASOP Treble but i cant navigate coz of the 1000 of forceclosed errors.
I formated the userpartition as i was asked from Huawei, and bevore i did those installations i did a fullwipe with EMUI.
The Recovery cant connect to the server, and yeah.. i dont know what to do next. ofc i have unlocked bootloader. I bought the Phone in Switzerland with Dual Sim. ANE-LX1.
Does anyone have another idea?
Cheers
EDIT:
After 10000 billions klicks i managed to get through the treble wizzard, even when the com.android.phone has stopped is comming every second.
At the Moment im in the About Phone Screen and i see this: (I am in the newest ASOP Treble SU with gapps)
Model: ANE-LX1
Android Version 8.1
Baseband: unknown
Kernel Version 4.4.23+ (gcc version 4.9x 20150123 (prerelease) (GCC))
Fri Mar 9 09:51:47 CST 2018
Build Number ANE-LX1 8.0.0.112(c432) <------- WTF ?!?
I hope this informations is something to work with.
SIM CARD is not readable.
Edit2:
I connected it to HI SUit. It says my device running properly on the .112 Version (WTF i got Treble installed)
I cant connect anything. How the hell can i get rid of this ****ing wong Build number??
Same for Checking Updates. .112 should be newest (its not its 126) Any ideas?
Edit3:
Can only Flash with fastboot. Twrp cant mount the partitions. Trying to installing the zip or adb sideload gives me an error code or command not allowed :\
i think the best way is
download a FULL-Update for your build
https://forum.xda-developers.com/9-lite/help/huawei-honor-firmware-download-t3790327
read this https://forum.xda-developers.com/hon...flash-t3778085
if you understand and have the know how : good luck
with this way i have my Ho9L reflash to stock-rom
you have to know what you're doing
use Magisk (search inside xda the thread)
this work by me better as SuperSU (with less problem's)
use this twrp, it's work WITH encryption
ttps://forum.xda-developers.com/huawei-p20-lite/development/recovery-testing-t3783587
if you understand what i am write - you can reset your phone to "delivered-state" and beginning by zero (initial-setting's) and
what ever you flash - you have a chance to reset your phone
first look on bootloader-screen if
- bootloader unlocked
- FRP unlock
THIS is essential !
last tip: let the fingers from custom-rom if this not expressly build for OREO
OREO is other as NOUGAT ! very different !
Relock your bootloader before trying an Erecovery...
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
heindrix said:
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
Click to expand...
Click to collapse
I'm getting this error when I'm trying to extract UPdate.app of anE-LX1 8.0.0.108(C185)
https://ibb.co/k0HmGy
haidermiz said:
I'm getting this error when I'm trying to extract UPdate.app of anE-LX1 8.0.0.108(C185)
https://ibb.co/k0HmGy
Click to expand...
Click to collapse
go to settings, untick all options that have "verify" in it, and try extract again.
heindrix said:
go to settings, untick all options that have "verify" in it, and try extract again.
Click to expand...
Click to collapse
thanks it worked
heindrix said:
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
Click to expand...
Click to collapse
When i did fastboot flash vendor vendor.img it says
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460706 KB)...
OKAY [ 18.084s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
haidermiz said:
When i did fastboot flash vendor vendor.img it says
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460706 KB)...
OKAY [ 18.084s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
Click to expand...
Click to collapse
Hi there, if you have TWRP, you could flash system and vendor using TWRP. boot into TWRP, choose install, choose use image file, and flash system.img to system, and vendor.img to vendor.
heindrix said:
Hi there, if you have TWRP, you could flash system and vendor using TWRP. boot into TWRP, choose install, choose use image file, and flash system.img to system, and vendor.img to vendor.
Click to expand...
Click to collapse
Tried then phone was stuck at installing update 5% after 5 mins there was a screen android written on it then again it booted to erecovery i factory reset data, wiped cache then again it rebooted and it's finally open now thanks
heindrix said:
Hi there, if you have TWRP, you could flash system and vendor using TWRP. boot into TWRP, choose install, choose use image file, and flash system.img to system, and vendor.img to vendor.
Click to expand...
Click to collapse
I did that a installed stock rom after that I tired to reset data it said failed, it failed at 20% then I WIPED CHAHE and now when It opened I sign in and downloaded snapchat but it's noy opening and in settings about phone there's no model number mentioned it says unknown I don't know what to do
haidermiz said:
I did that a installed stock rom after that I tired to reset data it said failed, it failed at 20% then I WIPED CHAHE and now when It opened I sign in and downloaded snapchat but it's noy opening and in settings about phone there's no model number mentioned it says unknown I don't know what to do
Click to expand...
Click to collapse
if you could, please provide screenshot so i can see it more clearly.
after you flashing the rom, one thing you must do is to format the data and cache through emui erecovery, as long as you're not format the data and cache successfully, the rom will not works properly.
for another reference, please refer to my other post here : https://forum.xda-developers.com/ma...0-pro-help-t3776050/post76916307#post76916307
heindrix said:
if you could, please provide screenshot so i can see it more clearly.
after you flashing the rom, one thing you must do is to format the data and cache through emui erecovery, as long as you're not format the data and cache successfully, the rom will not works properly.
for another reference, please refer to my other post here : https://forum.xda-developers.com/ma...0-pro-help-t3776050/post76916307#post76916307
Click to expand...
Click to collapse
Greetings, I downloaded the rom of my Huawei p20 EML-L09 and it has two Update.app
How and in what order should I install them?
Udpate.app that weighs 4.62gb and
update_EML-L09_hw_la.app which weighs 1.5gb
Thanks a lot.
ajbn7 said:
Greetings, I downloaded the rom of my Huawei p20 EML-L09 and it has two Update.app
How and in what order should I install them?
Udpate.app that weighs 4.62gb and
update_EML-L09_hw_la.app which weighs 1.5gb
Thanks a lot.
Click to expand...
Click to collapse
Hi,
this guide is two years old, if you want to recover your phone, download Service ROM from androidhost.ru website, and flash it using dload method .
Which EMUI version are you running? Your region is C605 ?
-Alf- said:
Hi,
this guide is two years old, if you want to recover your phone, download Service ROM from androidhost.ru website, and flash it using dload method .
Which EMUI version are you running? Your region is C605 ?
Click to expand...
Click to collapse
Correct, my region is 605. I already downloaded the latest version available for download on that page which is 8.1.
Before my phone went into brick, it had version 9.1
And bring those two update.app
ajbn7 said:
Before my phone went into brick, it had version 9.1
Click to expand...
Click to collapse
For 9.1 you can download
https://androidhost.ru/2bCG
Unpack .zip archive , find dload file and simply transfer it to the SD card, without unpacking it! (instructions can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo.
Note: Service ROM L-29 contains both version - L-29 & L-09 .
-Alf- said:
For 9.1 you can download
https://androidhost.ru/2bCG
Unpack .zip archive , find dload file and simply transfer it to the SD card, without unpacking it! (instructions can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo.
Note: Service ROM L-29 contains both version - L-29 & L-09 .
Click to expand...
Click to collapse
I struggled so hard to download the file, and to my surprise it does not include the software version for the L-09, only for the L-29
Are there any risks if I try to install version 8.1?
Another thing, the Huawei p20 does not have a micro sd slot, I guess I should do it through a USB OTG?
ajbn7 said:
I struggled so hard to download the file, and to my surprise it does not include the software version for the L-09, only for the L-29
Click to expand...
Click to collapse
Are you sure?
I'm really sorry, but most of the packages are universal.
ajbn7 said:
Are there any risks if I try to install version 8.1?
Click to expand...
Click to collapse
It may brick your phone definitively.
ajbn7 said:
Another thing, the Huawei p20 does not have a micro sd slot, I guess I should do it through a USB OTG?
Click to expand...
Click to collapse
Yes, you can.
ajbn7 said:
I struggled so hard to download the file, and to my surprise it does not include the software version for the L-09, only for the L-29
Are there any risks if I try to install version 8.1?
Another thing, the Huawei p20 does not have a micro sd slot, I guess I should do it through a USB OTG?
Click to expand...
Click to collapse
Okay, I definitely don't get the 9.1 for Eml-09 for free.
So last query (I hope), what is less risky, install Rom 8.1 which is for my region and exact model, or install Rom 9.1 with my region but for model L-29 or install a Rom 9.1 for my model but with a different region?
Thank you for your support.
ajbn7 said:
what is less risky?
Click to expand...
Click to collapse
L29 EMUI 9.1 C605. Even if it succeeds the phone will not work correctly.
Most probably you will get the wrong model or in build number "system_0.46 (xxxx)" . HiSuite will not recognize your device (and no OTA update).
Hi,
Here is a long story of bricking my device, I wanted to downgrade my device from Oreo to Nougat, and somehow I installed wrong software, mine is RNE-L21 and after successful downgrade with this method:
https://www.youtube.com/watch?v=_3vqb8hPZIQ
version of software I installed: RNE-L21C461B153CUSTC461D001
my device was NEO-something, in settings it showed 3GB of RAM instead of 4GB, screen resolutution 1280x720 instead of fullHD and 32GB of internal memory instead of 64, so I wanted to change that.
This time I downloaded (not so sure about this now) proper version of firmware: RNE-L21C432B135CUSTC432D001, and used another method because previous method didnt work, link:
https://forum.xda-developers.com/showpost.php?p=76503686&postcount=46
the HuRUpdater scrpit worked fine, I booted up the device and nothing was changed, so I was like, well, ok then.
but then I noticed that my bootloader was locked, so I wanted to unlock it, and after typing the *fastboot oem unlock code* and selecting yes on my device, It rebooted and just stuck at the "Powered by andriod" logo.
I was trying to enter TWRP but id doesnt work, its stuck at the loading screen, I was unable to enter fastboot, but now I figured out that when I discharge it, I'm able to enter fastboot.
So now I'm stuck, I don't know what should I do.
I saw a guide for flashing .img files from UPDATE.APP, but that guide was for Oreo, and I've got diffrent .img files inside my Nougat UPDATE.APP so I don't want to risk:
https://forum.xda-developers.com/mate-10/help/mate-10-lite-bricked-t3794236
sentavn said:
you should format by using fastboot. First download your stock ROM and extract with Huawei Firmware Extracter. Select UPDATE.APP and extract following files:
erecovery_kernel.img
erecovery_ramdisk.img
erecovery_vbmeta.img
cust.img
erecovery_vendor.img
kernel.img
ramdisk.img
recovery_vbmeta.img
recovery_vendor.img
system.img
Reboot your device in to fastboot mode (recovery mode) and flash those files one by one:
fastboot flash erecovery_kernel erecovery_kernel.img
...
fastboot flash system system.img
//
Erase your userdata space:
fastboot -w
//reboot
fastboot reboot
Now go to your stock recovery and do factory reset, wide cache.
Now your device back to stock OREO
Click to expand...
Click to collapse
Any Ideas?
HOW I FIXED:
I downloaded this EMUI 5 Nougat, Thanks to bozka1:
https://androidhost.ru/5SZ
I extracted UPDATE.APP file using Huawei Update Extractor.
I was trying to flash everything via fastboot: BOOT.img, RECOVERY.img, RECOVERY2.img, CUST.img, SYSTEM.img but nothing helped me.
I found out what you can flash via fastboot here:
https://forum.xda-developers.com/general/general/huawei-fastboot-commands-t3850123
There was no hope for me, so I tried to flash USERDATA.img
fastboot flash userdata USERDATA.img
Click to expand...
Click to collapse
And then cmd promped something unusual:
target reported max download size of 471859200 bytes
sending 'userdata' (24576 KB)...
OKAY [ 0.646s]
writing 'userdata'...
(bootloader) success to erase cryypt info in oeminfo
OKAY [ 1.401s]
finished. total time: 2.049s
Click to expand...
Click to collapse
Then I proceeded to flash: BOOT.img, RECOVERY.img, RECOVERY2.img and CACHE.img
I didn't flash SYSTEM.img because I flashed it before like 1500 times.
My phone didn't work yet so I used the DLOAD method because RECOVERY finally worked, so I shut down the device and used three buttons combo:
First holding Volume Up, Volume Down and then pressing Power Button.
There is a documentation in the firmware I downloaded, SDcard must be in exFAT format.
Thank You bozka1.
voltzero2 said:
Hi,
Here is a long story of bricking my device, I wanted to downgrade my device from Oreo to Nougat, and somehow I installed wrong software, mine is RNE-L21 and after successful downgrade with this method:
https://www.youtube.com/watch?v=_3vqb8hPZIQ
version of software I installed: RNE-L21C461B153CUSTC461D001
my device was NEO-something, in settings it showed 3GB of RAM instead of 4GB, screen resolutution 1280x720 instead of fullHD and 32GB of internal memory instead of 64, so I wanted to change that.
This time I downloaded (not so sure about this now) proper version of firmware: RNE-L21C432B135CUSTC432D001, and used another method because previous method didnt work, link:
https://forum.xda-developers.com/showpost.php?p=76503686&postcount=46
the HuRUpdater scrpit worked fine, I booted up the device and nothing was changed, so I was like, well, ok then.
but then I noticed that my bootloader was locked, so I wanted to unlock it, and after typing the *fastboot oem unlock code* and selecting yes on my device, It rebooted and just stuck at the "Powered by andriod" logo.
I was trying to enter TWRP but id doesnt work, its stuck at the loading screen, I was unable to enter fastboot, but now I figured out that when I discharge it, I'm able to enter fastboot.
So now I'm stuck, I don't know what should I do.
I saw a guide for flashing .img files from UPDATE.APP, but that guide was for Oreo, and I've got diffrent .img files inside my Nougat UPDATE.APP so I don't want to risk:
https://forum.xda-developers.com/mate-10/help/mate-10-lite-bricked-t3794236
Any Ideas?
Click to expand...
Click to collapse
What is your original location, C461?
Which oeminfo you have flashed?
bozka1 said:
What is your original location, C461?
Which oeminfo you have flashed?
Click to expand...
Click to collapse
My original location is C432, I don't remember flashing any oeminfo
voltzero2 said:
My original location is C432, I don't remember flashing any oeminfo
Click to expand...
Click to collapse
Single SIM/dual SIM ?
Try reboot your phone into fastboot mode and use command
fastboot oem get-build-number
you'll see the number of your current firmware
bozka1 said:
Single SIM/dual SIM ?
Try reboot your phone into fastboot mode and use command
fastboot oem get-build-number
you'll see the number of your current firmware
Click to expand...
Click to collapse
It's dual sim,
the number of current firmware: System 5.1.0.98(08K5)
voltzero2 said:
It's dual sim,
the number of current firmware: System 5.1.0.98(08K5)
Click to expand...
Click to collapse
Okay, phone still locked ? What shows the screen in fastboot mode - phone and FRP ?
bozka1 said:
Okay, phone still locked ? What shows the screen in fastboot mode - phone and FRP ?
Click to expand...
Click to collapse
It says its unlucked:
https://imgur.com/a/LEDKWFr
I hope this link works
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
bozka1 said:
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
Click to expand...
Click to collapse
So I'll have to wait a little before I'll download Service ROM, my internet connection isn't the greatest, but I flashed Your TWRP and unfortunately it doesn't work;
If I hold the Power button and Volume Up - the same story as before, I see the loading TWRP screen and nothing happends,
If I let the device to boot up and then press only the Volume Up button - it says "Your device is booting up" and nothing happens.
By the way, what can happen when I'll use "fastboot flash recovery something.img" instead of recovery2?
EDIT:
I did some testing and Your TWRP doesn't boot at all on my device, I flashed another one, Catuva21 3.1.1 Nougat, and that is the one that I had before - it is booting but never loads.
voltzero2 said:
By the way, what can happen when I'll use "fastboot flash recovery something.img" instead of recovery2?
Click to expand...
Click to collapse
TWRP will automatically overwrite Stock recovery, it's impossible to flash something from dload without Stock recovery .
Using command "recovery2" you will install TWRP over eRecovery .
Try flash Service ROM from SD card without TWRP & oeminfo flashing, but Im not sure... your system is heavily damaged and incomplete .
bozka1 said:
TWRP will automatically overwrite Stock recovery, it's impossible to flash something from dload without Stock recovery .
Using command "recovery2" you will install TWRP over eRecovery .
Try flash Service ROM from SD card without TWRP & oeminfo flashing, but Im not sure... your system is heavily damaged and incomplete .
Click to expand...
Click to collapse
So the phone would boot up the TWRP without pressing anything? Damn, I might have done that typo error... Do You know if I can restore the stock recovery from the UPDATE.APP file? I mean flash it
voltzero2 said:
So the phone would boot up the TWRP without pressing anything? Damn, I might have done that typo error... Do You know if I can restore the stock recovery from the UPDATE.APP file? I mean flash it
Click to expand...
Click to collapse
Use Huawei Update Extractor and extract RECOVERY.img , copy it to the "Minimal ADB and fastboot" folder . Command :
fastboot flash recovery RECOVERY.img
bozka1 said:
Use Huawei Update Extractor and extract RECOVERY.img , copy it to the "Minimal ADB and fastboot" folder . Command :
fastboot flash recovery RECOVERY.img
Click to expand...
Click to collapse
Yeah, I've done it already, unfortunately nothing changed. How about BOOT.img? Can this influence something?
EDIT:
I also wonder about just following the steps in my first post, I've got UPDATE.APP for Oreo, but I don't know if it will only make it worse.
bozka1 said:
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
Click to expand...
Click to collapse
Do I have to install oeminfo to be able to use the "three buttons combo"? Because I tried it today and it doesn't work, phone is just stuck at "Your device is booting.." screen, guess I'm out of luck
I fixed it, solution will be attached to first post.
Thanks to bozka1 who gave me this helpful link:
https://androidhost.ru/5SZ
voltzero2 said:
I fixed it, solution will be attached to first post.
Thanks to bozka1 who gave me this helpful link:
https://androidhost.ru/5SZ
Click to expand...
Click to collapse
You're welcome
Hi help me
Bozka1
My huawei mate 10 lite is brick stock on erecovery what can i do now
Lj08 said:
My huawei mate 10 lite is brick stock on erecovery what can i do now
Click to expand...
Click to collapse
Hi, have you tried to do something with your phone? Can you provide some info?
voltzero2 said:
Hi, have you tried to do something with your phone? Can you provide some info?
Click to expand...
Click to collapse
Voltzero2
I try factory reset wipe catch and no result just going back to erecovery
Lj08 said:
Voltzero2
I try factory reset wipe catch and no result just going back to erecovery
Click to expand...
Click to collapse
Alright, so did it just happened randomly or did you tried to do something with your phone? Did you unlocked bootloader or flashed custom recovery etc? You need to explain what happened, that's quite important if you want someone to help you.