N950N Android Oreo 8.0 official firmware download - Samsung Galaxy Note 8 Guides, News, & Discussion

Hello,
Oreo is out for Korean N950N devices:
updato-
https://updato.com/firmware-archive-select-model?record=A791A467319411E89F15FA163EE8F90B
Mega-
https://mega.nz/#!9yYBkYpD!29PjlmDfL0_FJI7LqSdAEYFwqFyV0GLPBP_9IlFtslE
flashable only using the latest odin
odin 3.13.1-
https://forum.xda-developers.com/galaxy-s8+/how-to/odin-available-3-13-1-oreo-fws-t3755957

Do u have flashable to twrp?
N950n oreo?

Kailey17 said:
Do u have flashable to twrp?
N950n oreo?
Click to expand...
Click to collapse
odin 3.13.1 only
https://forum.xda-developers.com/galaxy-s8+/how-to/odin-available-3-13-1-oreo-fws-t3755957

bober10113 said:
Hello,
Oreo is out for Korean N950N devices:
updato-
https://updato.com/firmware-archive-select-model?record=A791A467319411E89F15FA163EE8F90B
Mega-
https://mega.nz/#!9yYBkYpD!29PjlmDfL0_FJI7LqSdAEYFwqFyV0GLPBP_9IlFtslE
flashable only using the latest odin
odin 3.13.1-
https://forum.xda-developers.com/galaxy-s8+/how-to/odin-available-3-13-1-oreo-fws-t3755957
Click to expand...
Click to collapse
It locks you out of ims settings you can't turn on volte
Don't down load

hhoffa said:
It locks you out of ims settings you can't turn on volte
Don't down load
Click to expand...
Click to collapse
you should CC samsung

Why... why did I update to this ****... UGH... Camera start lags now and then the shudder doesn't start taking a picture when you hit the shudder button which has a large delay... Other stuff don't work as well before Oreo....

You can flash back to Nougat, many have, as have I.

I also went back to nougat but kept bootloader and modem. dont know if its just the weather that is more agreeable but my reception seems to be way better on oreo CRC1 than nougat BRA1.
what is a real deal breaker for me is titanium backup FC's. i cant even run it for more that 5 seconds.
Xposed and gravity box module seems to be dodgy.
some of the new security features are also a bit annoying and i think is what is causing my xposed and titanium issues.
Also has anyone noticed that the csc regions for some regions are missing.
ie:
im on rogers, i usualy extract csc files from xac firmware and keep rwc.
when i open the n950w oreo firmware only bell csc is there. all other canadian providers are absent...

Related

Oreo OTAs

Close thread
Is there one for the S7 Active?
ThunderingLight said:
Is there one for the S7 Active?
Click to expand...
Click to collapse
Hasn't been found yet
Ok can you update the post once it has been found?
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
So, I did this. Pretty impressed with the overall device feel now, SE9 is nice . No hang ups other thank it took a long friggin' time, also remember this will WIPE all the data, so make sure to do a backup prior to. The initial/first phone setup is very iPhone-ish, imo.
bobloblaw1 said:
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
Click to expand...
Click to collapse
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
PGHammer said:
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
Click to expand...
Click to collapse
Will it work for sm-g930u at&t ????
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
HIGHLY doubtful - not with a specific firmware check in place.
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
miko12312 said:
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
Click to expand...
Click to collapse
What's your bootloader version? (5th from last letter in build number)
Sent from my SM-G955U using Tapatalk
FatalONEM8 said:
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
If it weren't for this being a daily driver, I'd consider it. However, because it is, that's not an option. So I'll have to wait for either a neutral version or one that will work with the SM-G930T.
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
micallan_17 said:
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
Click to expand...
Click to collapse
Try using PrinceComsy Odin
Sent from my SM-G955U using Tapatalk
oreo otas
Goodnight friends, I started to update my phone to version 8.0 but it has more than 30 min in the option of patchin system files is normal or my step to better life is my s7.
Excuse me for my English since it is not my native language.
spend the fright of my life but finally install now approve to see how it works on android 8.0
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Has anyone been able to successfully downgrade back to RA1 after sideloading 8.0?
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
Just reboot in recovery mode and wipe cache
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
I had the same issue. The recommendation of rebooting into recovery and wiping Cache works.
:good:

SM-A520F Got oreo in Russia

Thanks also @corsicanu for that
●CaloMarzi● said:
Thanks also @corsicanu for that
Click to expand...
Click to collapse
Will install it and give some feedback later..
And some screens of ota notification: :good::good::good:
LOL
Link pleas
It would be cool if someone who got this update installed TWRP and did a system dump. nevermind
What's new in Oreo update?
What about performance?
7.0 was terrible...
Castle Of Glass said:
What about performance?
7.0 was terrible...
Click to expand...
Click to collapse
Really? Mine has been very good, but to be honest I didn't try Marshmallow extensively, the Nougat update was already rolled out when I bought the device.
Let's see what Oreo brings to the table!
This are the main differences I noticed so far, the speed animation was increased by double.
The only app with exclusive features I have is YouTube, yo can detach the video window onto the home screen, and the notifications change color based on the video playing.
And first Oreo rom out here :good:
I got the download A520FXXU4CRD5
I want system dump of stock oreo
can you share us a zip file?
DartzSoryu said:
This are the main differences I noticed so far, the speed animation was increased by double.
The only app with exclusive features I have is YouTube, yo can detach the video window onto the home screen, and the notifications change color based on the video playing.
Click to expand...
Click to collapse
May I ask how did you get the update? I noticed you're on a Mexican carrier
rashisp said:
May I ask how did you get the update? I noticed you're on a Mexican carrier
Click to expand...
Click to collapse
4 posts above yours you will find a custom rom based on oreo. Also you can download full fw from sammobile or with samfirm.
corsicanu said:
4 posts above yours you will find a custom rom based on oreo. Also you can download full fw from sammobile or with samfirm.
Click to expand...
Click to collapse
Yes I saw it! You're fast my friend, I'm glad to see your Hades ROM once again!
hi,
was any of you able to disable force-encryption for the /Data partition?
I am not able to do this with my A3 on stock Oreo
do anyone have fingerprint problem after oreo update? in lockscreen fingerprint don't work, but when screen turns off, it recognizes my finger and unlocks phone. other than this problem, oreo is better than nougat in every aspect
A320F Oreo
Guys I installed Oreo (not a big improvement to android 7) but I can't root it now. Before I used TWRP with Magisk but now it won't install TWRP. Can anyone help me to root it?
Did anybody succeed to install the Stock firmware from this via Odin? My JOdin r1035 says corrupt files detected and won't do anything.
Then I unpacked all the files and flashed with heimdall 1.4.1 to the respective partitions.
That seemed to work to a degree but tripped my warranty bit and the phone wouldn't boot past the Galaxy A5 screen. Then I installed TWRP and HadesRom and now I am on this until further notice. I would like to get back to stock at some point but this doesn't seem to work with the old JOdin. I don't have a Windows computer. All I have is a Mac from work for a couple of weeks and at home all Linux.
Installing firmware via Odin
r0ckarong said:
Did anybody succeed to install the Stock firmware from this via Odin? My JOdin r1035 says corrupt files detected and won't do anything.
Then I unpacked all the files and flashed with heimdall 1.4.1 to the respective partitions.
That seemed to work to a degree but tripped my warranty bit and the phone wouldn't boot past the Galaxy A5 screen. Then I installed TWRP and HadesRom and now I am on this until further notice. I would like to get back to stock at some point but this doesn't seem to work with the old JOdin. I don't have a Windows computer. All I have is a Mac from work for a couple of weeks and at home all Linux.
Click to expand...
Click to collapse
I just did it, there was some error with the Odin version so I had to find the v3.13.1 Turns out that v3.12.x can't read some lz4 (or smt like that) files. Might want to try with that. Check on this link https://forum.xda-developers.com/galaxy-s8+/how-to/odin-available-3-13-1-oreo-fws-t3755957

//SM-G930A\\ **Stock Oreo Odin G930AUCU4CRE4**

Here is stock Oreo, You can use this to return back to stock or update enjoy!
AP_G930AUCU4CRE4_CL13527040_QB18162296_REV02_user_low_ship_MULTI_CERT_meta.md5
BL_G930AUCU4CRE4_CL13527040_QB18162296_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930AUCU4CRE4_CP9711955_CL13527040_QB18162296_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G930AATT4CRE4_CL13527040_QB18162296_REV02_user_low_ship_MULTI_CERT.tar.md5
You can always go back to Nougat since Revision4
https://www.androidfilehost.com/?fid=818222786056037245
So cool! Thank you so much ^.^
Thanks
Legendary
deleted
JUSMEJOSE said:
Here is stock Oreo, You can use this to return back to stock or update enjoy!
AP_G930AUCU4CRE4_CL13527040_QB18162296_REV02_user_low_ship_MULTI_CERT_meta.md5
BL_G930AUCU4CRE4_CL13527040_QB18162296_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930AUCU4CRE4_CP9711955_CL13527040_QB18162296_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G930AATT4CRE4_CL13527040_QB18162296_REV02_user_low_ship_MULTI_CERT.tar.md5
You can always go back to Nougat since Revision4
https://www.androidfilehost.com/?fid=818222786056037245
Click to expand...
Click to collapse
The AP is .tar. how do i repack it into an .md5?
SamGuy2020 said:
The AP is .tar. how do i repack it into an .md5?
Click to expand...
Click to collapse
Why? It works as is.
Totally missed this earlier, much appreciated. Thank you...
does this require TWRP?
jrkruse said:
Why? It works as is.
Click to expand...
Click to collapse
stuck at file analysis. Or do tar images just take a lot longer?
so this may be a silly question, but my att s7 is currently at Baseband Version: G930AUCS4APK1 and on Android Version: 6.0.1. When clicking software update, it always tell me there is no update available so I've been stuck with this.
is this something I can download and install via Odin?
imocoolcool said:
so this may be a silly question, but my att s7 is currently at Baseband Version: G930AUCS4APK1 and on Android Version: 6.0.1. When clicking software update, it always tell me there is no update available so I've been stuck with this.
is this something I can download and install via Odin?
Click to expand...
Click to collapse
Quick update, I tried to install it and it failed with all the Odin versions I had, but then I used the "Odin3 v3.13.1_3B_PatcheD" version, and its working like a charm now finally I'm out of that 6.0.1 and at the latest!
Deleted
imocoolcool said:
so this may be a silly question, but my att s7 is currently at Baseband Version: G930AUCS4APK1 and on Android Version: 6.0.1. When clicking software update, it always tell me there is no update available so I've been stuck with this.
is this something I can download and install via Odin?
Click to expand...
Click to collapse
i don't think at&t updates phones if your sim card is from another carrier . you will have to flash probably nougat first then oreo. at&t files are scarce but if you search here at "AT&T Samsung Galaxy S7" forums to see what you can find. you might have to go through a whole series of flashes before you can get oreo though. Alternatively, you can flash G930U firmware from sammobile just to get to about BRA1 or so then start flashing the most resent at&t files posted here or you can just. You could also just stay on g930u. If you are with at&t you should call customer service or go to your nearest retail location. if you've never used odin you should look up on youtube how to flash
imocoolcool said:
so this may be a silly question, but my att s7 is currently at Baseband Version: G930AUCS4APK1 and on Android Version: 6.0.1. When clicking software update, it always tell me there is no update available so I've been stuck with this.
is this something I can download and install via Odin?
Click to expand...
Click to collapse
You can download the firmware that i posted and go straight to Oreo update with no problem just make sure you backup eveverything and if for some reason you can always go back to Nougat since u can rollback
Update to Oreo
Hi guys,
I have g930aucs4bqe1 version can i do the update directly?
Hi
My actual baseband version is : G930AUCU4BQF3. I can't update via OTA update because I live outside US (no AT&T sim) so I'm stuck to that baseband version. My question is do I need to update to the latest update of Nougat or can I update directly to Oreo with these files. Thanks
jrkruse said:
Why? It works as is.
Click to expand...
Click to collapse
Hi it's stuck at file analysis, is it a case where tar files take longer because it would not flash regardless of how long i had it plugged in.
flashing SM-G930A and I keep getting model dismatch FAIL! I'm screwed I got work in 2hrs and I need my phone
AP File
jrkruse said:
Why? It works as is.
Click to expand...
Click to collapse
AP file is only .tar not md5. does it works fine? Or do I need to change the extension?
Thanks

SM-G965U G965USQS4CSC8 & SM-G965U1 G965U1UEU4CSC7 Apr-21-19 Official PIE Firmware

SM-G965U G965USQS4CSC8 & SM-G965U1 G965U1UEU4CSC7 Apr-21-19 Official PIE Firmware
Introduction:
Download official G965USQS4CSC8 (carrier) and G965U1UEU4CSC7 (unlocked) firmware for the SM-G965U and SM-G965U1 here. You can flash either onto a SM-G965U or SM-G965U1 using the patched Odin linked below. Flashing back and forth is safe because they are both on bootloader version 4.
Click to expand...
Click to collapse
Patch Level:
Carrier SM-G965U 04-01-19 (CSC8)
Unlocked SM-G965U1 03-01-19 (CSC7)
Click to expand...
Click to collapse
So, what is userdata?
A lot of people think this is carrier bloat only. However, userdata also contains the files necessary to activate carrier specific features. Without it, you may not be able utilize all of the carrier features that the phone is capable of providing. Please note that carrier userdata may not be available for your carrier.
Click to expand...
Click to collapse
SM-G965U1 (unlocked version) users read here:
Drawbacks of flashing carrier version G965USQS4CSC8 firmware on the unlocked phone (SM-G965U1):
CallerID no longer works unless you subscribe to carriers CallerID service.
Installs carrier bloat.
Benefits of flashing carrier version G965USQS4CSC8 firmware on the unlocked version phone (SM-G965U1):
Will enable all carrier specific features (video calling, etc, etc).
Click to expand...
Click to collapse
SM-G965U (carrier version) users read here:
Drawbacks of flashing unlocked version G965U1UEU4CSC7 firmware on the carrier version phone (SM-G965U):
Will disable all carrier specific features (video calling, etc, etc).
Benefits of flashing unlocked version G965U1UEU4CSC7 firmware on the carrier version phone (SM-G965U):
CallerID works without subscribing to carriers CallerID service.
Eliminates carrier bloat.
Click to expand...
Click to collapse
Installation Instructions:
Reboot to download mode:
Power off your Galaxy S9 Plus completely until it vibrates.
Press and hold the Volume Down + Bixby + Power buttons simultaneously. Release the buttons when you see the warning message.
Now just press Volume up button to continue.
Congratulations, you're now in download mode.
Connect your phone to your PC:
Start the patched Odin 3.13.1 that you downloaded from the provided link.
Plug the cord your phone came with into your phone and PC. Other cords may not work.
The Odin log will display a <ID:0/005> Added!! message once it connects.
Flash the firmware:
First, extract the compressed firmware to a folder on your PC.
In Odin, begin with the BL (bootloader) box, navigate to the firmware folder and select the file beginning with BL_.
Wait for each file to initialize and appear to the right of its corresponding box before attempting to proceed to the next step.
Now select the AP (Application Processor aka System) box, it should open the correct folder, then select the file beginning with AP_.
AP takes a while to initialize, don't worry.
Now select the CP (Core Processor aka modem) box, then select the file beginning with CP_.
Now select the CSC (Consumer Software Customization aka Carrier Settings) box, then select the file beginning with CSC_.
Choose HOME_CSC to not wipe your phone, or CSC_ (preferred option when switching between unlocked and carrier versions) to wipe your phone .
Optionally, select the userdata (User Data) box, then select the file beginning with USERDATA_.
Now, click start and wait for the magic.
Disconnect the cord when the phone reboots.
The phone should boot to recovery to automatically cleanup, then reboot again.
Click to expand...
Click to collapse
Downloads:
Download SM-G965U Firmware Here
Download SM-G965U1 Firmware Here
Download patched Odin Here
Click to expand...
Click to collapse
Your post title made it seem like the v2 version for the U1 was out...
Anyone spot a full download or patch for G965USQS2ARF4?
Canadian S9's are already running May security patch,build number G965WSWVLU2ARE6
Full version of G965USQS2ARF4 uploading now
Full version of G965USQS2ARF4 uploading now
You do realize how misleading the thread topic is? Your implying there's a U1 version of the ARF4 firmware.
The 965U ARF4 Odin files have also been out for days. I flashed 2 days ago.
todd3835 said:
You do realize how misleading the thread topic is? Your implying there's a U1 version of the ARF4 firmware.
The 965U ARF4 Odin files have also been out for days. I flashed 2 days ago.
Click to expand...
Click to collapse
It's not misleading, the firmware can be flashed on either version and it is official firmware. Further no one has posted the full version (includes HOME_CSC and USERDATA) for download until now. What's your beef?
Edit
rmarinella said:
This is the official G965USQS2ARF4 firmware for all SM-G965U Samsung Galaxy S9+ devices.
Click to expand...
Click to collapse
Thanks for posting this!
I had the ARE6 but the ARF4.
There is also an ARF5 out too! I think thats what @Ellywiggy said?
Scott said:
Thanks for posting this!
I had the ARE6 but the ARF4.
There is also an ARF5 out too! I think thats what @Ellywiggy said?
Click to expand...
Click to collapse
The ARF5 Isn't official, at least not yet. If you use apps like SamsungPay that rely on safety net, you're best off not to use that version, at least until or if it becomes official.
rmarinella said:
The ARF5 Isn't official, at least not yet. If you use apps like SamsungPay that rely on safety net, you're best off not to use that version, at least until or if it becomes official.
Click to expand...
Click to collapse
Gotcha!
Also, in the OP you could help clarify what the other guy was talking about by stating that this firmware is US Xfinty which is a Verizon MVNO. I think thats what the other guy may have meant. When you look at the OP quickly you do get the impression that this may be for the unlocked U1. But eitherway... Thanks for posting it! Much better than trying to download from SamMobile!!!
rmarinella said:
It's not misleading, the firmware can be flashed on either version and it is official firmware. Further no one has posted the full version (includes HOME_CSC and USERDATA) for download until now. What's your beef?
Click to expand...
Click to collapse
The reason I say it *was* misleading is because the title made it seem like there was a U1 version of the 2ARF2 release. While I'm not in that boat, there are people looking to swap carriers, which requires flashing to the U1 to remove carrier settings, before then flashing to a new carrier.
rmarinella said:
The ARF5 Isn't official, at least not yet. If you use apps like SamsungPay that rely on safety net, you're best off not to use that version, at least until or if it becomes official.
Click to expand...
Click to collapse
Samsung Pay does usually work on the unoffial / pre-release releases. Samsung Pay only relies on Knox.
todd3835 said:
The reason I say it *was* misleading is because the title made it seem like there was a U1 version of the 2ARF2 release. While I'm not in that boat, there are people looking to swap carriers, which requires flashing to the U1 to remove carrier settings, before then flashing to a new carrier.
Click to expand...
Click to collapse
Yep, that's me!
Waiting and Waiting....
Just got the ARF4 update for my SM-G965U1 with OTA this morning. So far so good.
sonymd said:
Just got the ARF4 update for my SM-G965U1 with OTA this morning. So far so good.
Click to expand...
Click to collapse
yeah I stared at it in shock and disbelief lol
sonymd said:
Just got the ARF4 update for my SM-G965U1 with OTA this morning. So far so good.
Click to expand...
Click to collapse
I just checked and I just got the OTA too!
Samfirm has the G965U1 ARF4 ODIN files available for download.
ChadH42 said:
Samfirm has the G965U1 ARF4 ODIN files available for download.
Click to expand...
Click to collapse
Anyone able to download and upload it here?
geoff5093 said:
Anyone able to download and upload it here?
Click to expand...
Click to collapse
I did. Flashed and all functions are working. I downloaded the TFN version.
ChadH42 said:
I did. Flashed and all functions are working. I downloaded the TFN version.
Click to expand...
Click to collapse
Do you have a link to it here? I'm on the T-Mobile firmware but want to flash it to Verizon, and need to flash it to the U1 unlocked firmware first.

Galaxy S9 & S9+ Android Pie update.

My friend recieved the Android Pie on his S9(SM-G960F) about a week ago. Since then I'm checking for updates every day and still no Android Pie Update on my S9+(SM-G965F). Both phones are Unlocked. Country: Cyprus/Europe.
Just flash the pie update via odin
If i do this with odin i will lose all my data right??
No it won't erase your data. Im using pie on 960u1
john1890 said:
If i do this with odin i will lose all my data right??
Click to expand...
Click to collapse
If you use the home CSC file, it won't wipe. If you use the plain CSC file, it will.
todd3835 said:
If you use the home CSC file, it won't wipe. If you use the plain CSC file, it will.
Click to expand...
Click to collapse
For Verizon you can use either and it will not wipe.
riveralc said:
For Verizon you can use either and it will not wipe.
Click to expand...
Click to collapse
What files did you use to get to pie on Verizon? I have been searching...
vperriceli said:
What files did you use to get to pie on Verizon? I have been searching...
Click to expand...
Click to collapse
Used G965USQS3BRK2_CL14537343_QB20783371_REV01_user_low_ship_MULTI_CERT_meta.tar which I believe was posted in this thread earlier.
Wee, i got pie update OTA today
sisterfister09 said:
My friend recieved the Android Pie on his S9(SM-G960F) about a week ago. Since then I'm checking for updates every day and still no Android Pie Update on my S9+(SM-G965F). Both phones are Unlocked. Country: Cyprus/Europe.
Click to expand...
Click to collapse
Same.issue with my s9 plus (phone unlocked country lebanon)
PIE for S9+ it's already on a stable version?
eivind82 said:
Wee, i got pie update OTA today
Click to expand...
Click to collapse
Nice one. Which version of the S9+ do you have? and which firmware were you running?
I have a korean S9+ that i got from my father in law, when i was in Korea last summer. Im running G965NKSU1CRLL/G965NOKR1CRLL/G965NKOU1CRLK.
First impression of PIE , is stabile atm. But need to run it for abit more. Visually i like that they have moved the clock to top left corner
And that there is more settings for the navbar, now i can almost hide it and only use swipe gestures at the bottom of the screen.
I checked my co-workers S9+ norwegian non carrier bound phone today, he also got the PIE OTA update today.
How to fix "app not installed on Samsung s9+"

Categories

Resources