Got some problem when I tried to flash the stock ROMs on acer A3-A40 tablet.
I have got the files from ACER support web sites, the zip file contains these dir/files :
--
META-INF/
boot.img
file_contexts.bin
lk.bin
preloader_neostra8167_tb_n.bin
scatter.txt
system.new.dat
system.patch.dat
system.transfer.list
type.txt
tz.img
I can boot into Recovery now but from the Recovery menu, it always said "package file not exist" (or not found) when I select "Apply update from SD card".
Should I rename the xxx.zip file to something like 'update.zip' ??
BTW, these are the files I have downloaded now:
--
- OS_Acer_AV0M0.RV03RC04.WW.GEN1_A60M_A.zip
- OS_Acer_RV09RC01.WW.GEN1_A60M_A.zip
- SD_ACer_AV0M0_A3-A40_RV07RC01_WW_GEN1.zip
none of them works for me......
Any advice here?
yes.
Koumeles.
Can someone send me RV07 rom?
RV07RC01
I can't download it anywhere. Everyone saying to download ti from ftp, but I cannot access it.
have about the same problem, during the update the power was turned off and after charging the battery the tablet hung on the Acer screensaver.
1. archives do not need to be unpacked when writing to a memory card.
2.Could you send me an archive - SD_ACer_AV0M0_A3-A40_RV07RC01_WW_GEN1.zip
The service center said that it could not access the FTP site to download this archive.
Look here if you can help firmwarefile_com/acer-iconia-one-10
Related
I got clockworkmod working fine, but I am unable to loan ROMs. Whenever I downloand a ROM it opens in muiltiple files and it also happens with TNT, Thi is where Im stuck
Step 3.
Copy whatever ROM you wish to install (it should be a .zip file) to the ROMs folder on your tablet. (Leave it zipped, Clockwork will install it from the .zip file as is). trying to get VEGan 5.1 final
Note: If the ROM you downloaded has multiple files, look for the one named “update.zip” and rename it to whatever you want (something to help you differentiate it from other ROMs), then copy that to the tablet. If an “update.zip” doesn’t exist, and you’re lost…read through that ROM’s thread and see if anybody else asked about it…if not then you probably should (on that ROM’s thread…each one is different).
I cant fiqure how to get the update.zip. When I do open the files i get 3 files
META_INF,boot, and system. I tried to copy and paste all three files in the ROMs, but it never show the update.zip
You don't need an update.zip with clockworkmod recovery... you just need the rom that is zipped and can be named anything.
Stop unzipping the rom you are downloading and just copy it to your device. Install that with clockworkmod recovery.
Sent from my Viewsonic 10" GTab...
novicexda said:
I got clockworkmod working fine, but I am unable to loan ROMs. Whenever I downloand a ROM it opens in muiltiple files and it also happens with TNT, Thi is where Im stuck
Step 3.
Copy whatever ROM you wish to install (it should be a .zip file) to the ROMs folder on your tablet. (Leave it zipped]/B], Clockwork will install it from the .zip file as is). trying to get VEGan 5.1 final
Note: If the ROM you downloaded has multiple files, look for the one named “update.zip” and rename it to whatever you want (something to help you differentiate it from other ROMs), then copy that to the tablet. If an “update.zip” doesn’t exist, and you’re lost…read through that ROM’s thread and see if anybody else asked about it…if not then you probably should (on that ROM’s thread…each one is different).
I cant fiqure how to get the update.zip. When I do open the files i get 3 files
META_INF,boot, and system. I tried to copy and paste all three files in the ROMs, but it never show the update.zip
Click to expand...
Click to collapse
you've answered your own question, the rar or zip file you downloaded might be in diff names, but always leave it in zip format. if in rar, unrar and the zip file should be in it.
in clockwork recovery, you can update by update.zip or choose your own zip
tcrews said:
You don't need an update.zip with clockworkmod recovery... you just need the rom that is zipped and can be named anything.
Stop unzipping the rom you are downloading and just copy it to your device. Install that with clockworkmod recovery.
Sent from my Viewsonic 10" GTab...
Click to expand...
Click to collapse
That is my problem, if automaticly unzips when it downloads. I am not sure if its my windows setting becaue I am unable to download TNT lite because I keep getting " windows can no opem" message. Is there a way i can prevent it from unzipping? Thanks BTW
maybe use a diff browser to download or right click on link and "save as"
You might be hitting open instead of save ...
down load it direct to your Gtab
Download the file directly to your tab. Use ES file explorer to move it to your SD card if necessary. Reboot in to clock work - choose file from SD card-select it and install.
Hi guys.
I want my phone back to standard and restores don't work.
I downloaded the sammobile I9300XXELLA_I9300OXAELLA_BTU.zip and I unzipped (to see the containing files) which are KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 and SS_DL.dll
I then transferred the .zip to my SD card.
Opened mobile ODIN
I then selected open file... (or which one do I choose if not) it then said that "this is not an OTA / Update ZIP file ! ZIP files containing partitions are not supported"
So what do I do?
oli3107 said:
I then selected open file... (or which one do I choose if not) it then said that "this is not an OTA / Update ZIP file ! ZIP files containing partitions are not supported"
Click to expand...
Click to collapse
read this sentence again what does it mean? The zip file you have is not supported. Hence unzip and just transfer the md5 file and it should work.
Hi,
I´m getting software install failed! on my Huawei wile doing an OTA ROM update.
It is an intermediate update so update.app does not have system.img, but rather the update.zip has folders with a patch for the /System.
As of that, I wanted to know what's wrong, so, is there any log file created from the update procedure?
G Play Mini - CHC-U01 Update to V100R001C434B120
OTA URL:
http://update.hicloud.com/TDS/data/files/p3/s15/G854/g104/v29161/f1/full/update.zip
Inside update.zip is update.app (and the folders to patch the /system) which in turn compacts another update.app inside.
So, either "open inside" update.app or extract update.app from update.zip, rename that update.app to update.zip and open the last update.zip to get the update.app that can be opened with HuaweiUpdateExtractor to get the *.img files (exept system.img).
Since I can´t adb in recovery I can´t do a logcat.
Can anyone help me debug the OTA update?
Build Number
This is getting more like a diary...
I found the log file in ./splash2/recovery.log
Now, where is the system getting the information of the build number other than from build.prop, because the info on the "about" menu is different form what is in ro.build.display.id or any other variable on the file.
I'll appreciate any help!
I found that the variable is stored in ./cust/hw/eu/prop/local.prop (on my case the path "eu" is because my CustCVersion is European, on Russian should be .../ru/prop/local.prop").
Unfortunately I didn´t know that CWM doesn´t include cust.img on nandroid backups, so i don´t have the original ./cust structure to replace the original settings.
i have update fail with chc-u01 firmware 6.0.
how cani do?
Hello!
So, I have a Android Box MXQ 4K and I'm trying to create an update.zip from the latest update (wich I only found in .IMG format).
I know the box can do a update from a update.zip file. So I extracted the files from the IMG, extracted the system.img, and created the update.zip file using instructions that I found here in the forum. But it gave me an error that wasn't a valid package (yes, I signed it). I didn't tried to aply the update.zip direct from the Recovery Menu, because if I stay too much time (30s+) on the recovery menu, it gives me a Green Screen. What are my options?
Hi all recently purchased the Mecool KM8 P 2GB/16GB S912 Amlogic, updated the firmware to 7.1 but lost root access. I have managed to find some instructions on a Russian website to root the stock firmware but can't make head nor tale of it and don't want to brick the device.
The google translate version of the instructions reads as follows:
To get root 7 Androide did:
1.Nado SuperSu create a text file without an ending .txt textBOOTIMAGE = / dev / block / boot
2. Flash card throw Recovery for 7 Androyd created Fail SuperSu and SuperSU.zip (5,63 MB)
3. Boot into Recovery with USB there "Advanced" ==> "File Manager" find the file on a flash drive that put his name it .SuperSu in and copy it into the folder / system
3. Without leaving the Recovery go to "Set" and set SuperSU.zip (5,63 MB)
Can someone please help to decipher the above?
Here's the link to the instructions website. The downloads are pinned to the top of the page. Please let me know if you have any success...
http://4pda.ru/forum/index.php?showtopic=807465&st=1100#entry62380504
1. Create a texfile with this content:
BOOTIMAGE = /dev/block/boot
If I am not mistaken then this file should be saved wit the name .SuperSU and no extension.
2. Copy this file and the Supersu.zip onto a SD with a working TWRP recovery.
3. The file .SuperSu is now to be copied into the system folder - it does not specify if the one from the box or the one from the recovery is used - I assume the one on the box. But needs to be tested to be sure.
4. Without ending the recovery session go back and install install SuperSu.
Thing is you need a recovery that works with Nougat to do any of this.
But then again translators suck and someone capable of reading russing could bring some light on it....
Managed to get it to work. Steps in common English are as follows:
To get root on Android 7.1:
1. Create a text file (eg in Notepad) and name it Supersu without an ending .txt with the folowing text BOOTIMAGE = / dev / block / boot
2. On a microsd card copy Recovery.img (TWRP 7), the created SuperSu file (from step 1) and SuperSU.zip (5.63 MB)
3. Insert the card into Boax and boot into Recovery.
4. Using theTWRP recovery got to Advanced" then "File Manager" find the created Supersu file (from step 1) and copy it into the folder / system.
5. Without leaving the Recovery go to "Install" and flash SuperSU.zip (5.63 MB) from the Microsd card
can you post the required Files here?
i dont understand russian so i dont know what they wrote on 4pda.ru
I have found all file and attached at end of the Post
1. decompress km8p.zip to the root of your TF-Card so you have 3 Files on the root of your TF-Card (.SuperSU, SuperSU.zip and recovery.img)
2. power off your KM8P
3. Press Reset and hold it
4. Power your Box on and hold Reset
5. If you see the TWRP-Logo you can stop press Reset
6. On the Screen accept write and modifying Systemfiles
7. go to Advanced" then "File Manager" copy .Supersu file from TF-Card in/ system of your Box
8. then go to "Install" and flash SuperSU.zip (5.63 MB) from the TF-Card
9. Reboot and now you have root installed
MetaIIica said:
I have found all file and attached at end of the Post
Click to expand...
Click to collapse
I think you uploaded the wrong file, as the zip file you uploaded only contain one file (km8p), which has no file extension (it is probably a .zip file).
However it is missing the other files you are talking about, so could you upload the right files?
Thanks for the effort!
afehst said:
I think you uploaded the wrong file, as the zip file you uploaded only contain one file (km8p), which has no file extension (it is probably a .zip file).
However it is missing the other files you are talking about, so could you upload the right files?
Thanks for the effort!
Click to expand...
Click to collapse
I attached the TWRP for Android 7 here, if you still need it.
I have also started a thread on how to root with Magisk instead of supersu, as supersu wouldn't work for me.
https://forum.xda-developers.com/android-stick--console-computers/amlogic/howto-km8-p-2gb-8gb-s912-amlogic-tv-box-t3745937