need help
i accidendly flashed wrong rom in vivo y15s using sp flash tool now it just show black for couple of seconds and turn off whenever i hit powe button
i tried to flash correct rom using sp flash tool using all mtk drivers also all combination of keys but in all sp fash tool show error sbrom download da failed 2004
i can acess fastboot of rom currently in my mobile and can connect to pc
since bootloader is locked i cannot pass any helpful command
Related
My Lenovo A2107A-H 16 GB doesn't switch on after trying a cmw installation using SP Flash Tool. following a tutorial I formatted the device using sp flash tool. Help me to find solution to boot it again. but it is still detected on SP Flash Tool, the drivers are working well. But the screen remains black, nothing happens when pressing power button and trying to enter recovery mode.
you have to flash a new ROM ! I flash CWM with Mobileuncle and works fine ...my tablet the same with yours...the are tutorial of syserr in youtube ...
I flashed 4.4.2 Kitkat ROM to my Lenovo S5000-H using SP Flash Tool but it got Invalid IMEI and NVRAM error. I tried reflashing the ROM but this time it gave me an error TOOL Download image Fail!!!! I cant boot to Recovery and fastboot as well.
whenever I connect my device to my Laptop running on Win7(now updating to Win10) it detects the device but it connects the disconnects several times before I could fix the problem with my Driver which is why I cant flash the ROM to my Lenovo S5000-H using SP Flash Tool.
Is there another way to fix this or if you guys know how I can fix the connect-disconnect problem please Reply. Thanks
HadesGacheru said:
I flashed 4.4.2 Kitkat ROM to my Lenovo S5000-H using SP Flash Tool but it got Invalid IMEI and NVRAM error. I tried reflashing the ROM but this time it gave me an error TOOL Download image Fail!!!! I cant boot to Recovery and fastboot as well.
whenever I connect my device to my Laptop running on Win7(now updating to Win10) it detects the device but it connects the disconnects several times before I could fix the problem with my Driver which is why I cant flash the ROM to my Lenovo S5000-H using SP Flash Tool.
Is there another way to fix this or if you guys know how I can fix the connect-disconnect problem please Reply. Thanks
Click to expand...
Click to collapse
Well I had the same problem, am not an pro, and man u gotta understand, I opened device manager (Right click my computer, properties, device manager) then i realized that there was a new unknown device, I updated it from All MTK USB Driver 2014 i had downloaded earlier, then back to SP Flash Tool. and it completed the installation of my cutome rom
Hello everyone,
I post this message because I have a problem with my new Ulefone T1 I would like to flash.
I try to program the last ROM posted on needrom by strictly following each steps with SP Flash Tool.
It is not the first time I program a smartphone with a ROM and generally I encounter no problem.
I click on the 'Download' button and I plug my smartphone. Windows is well detecting the device in preloader mode. The SP Flash Tool starts by downloading DA and quickly reachs 100%.
But at this step, I hear that device is disconnecting and I get this error message : STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003).
Even by google'ling with the error message I found only a few results on some forums but never solution on it.
Is there someone can help me with this problem? And how to resolve it ?
Remark: It is no more possible to go in the recovery mode. Because with Android 7 the bootloader is locked, I tried a procedure to unlock it and to program a TWRP recovery in the fastboot mode. ("adb reboot boatloader", once in fastboot mode "fastboot oem unclock" and then program with "fastboot flash recovery recovery.img").
But now I have the following message when I start the smartphone: "orange state, your device has been unlocked and can't be trusted. Your device will boot in 5 seconds''.
And effictively, the device reboot but as soon as it starts again I get the same message and so on.
I try to go in recovery mode or fastboot mode but each time I get this message.
Thank you in advance if you can help me.
François.
Having the same issue.
In my case i did a factory reset and now im trying to install the stock frimware. But i got the same error while trying to Flash on SP.
Steps to reproduce:
-I turn off my mobile phone.
-Press Download (SP Button)
-Connect the phone to the PC
-And the same message appear!
Any help guys?
TehFox said:
Having the same issue.
In my case i did a factory reset and now im trying to install the stock frimware. But i got the same error while trying to Flash on SP.
Steps to reproduce:
-I turn off my mobile phone.
-Press Download (SP Button)
-Connect the phone to the PC
-And the same message appear!
Any help guys?
Click to expand...
Click to collapse
Hello,
Finally I found the way to program the smartphone.
- Turn off your mobile phone
- Press Download (SP Button) in SP Flash Tool
- Press Volume Down on the mobile phone.
- Keep Volume Down pressed and connect to the USB
- Normally SP Flash tool starts to program and you can release the Volume Down key.
Hop it will work for you.
Hello,
Finally I found the way to program the smartphone.
- Turn off your mobile phone
- Press Download (SP Button) in SP Flash Tool
- Press Volume Down on the mobile phone.
- Keep Volume Down pressed and connect to the USB
- Normally SP Flash tool starts to program and you can release the Volume Down key.
Hop it will work for you.
REDMi Note 3G MTK6592 hardbricked & not able to unbrick with SP flash tool,
I am able to connect the phone to sp flash tool with batterry in as well as battery removed. Flash tool detects the same, also it download procedure gets completed & Flash tool shows "Flash OK" but finaly not booting, no indication on charging, not responding to power key or any key combinations & no logo. please help if someone has came across the same problem & able to get out of the same.
Hello, my android phone could not power on, no recovery, no fastboot and is not charging at all. Not responding. But it is being detected with sp flashtool. I am only able to flash the preloader only. I am also able to format the device with sp flashtool also. The error i get is "error: Status_invalid_gpt"
kindly guide me through and provide a possible solution. Thanks https://s18.postimg.cc/4vuzw6uh5/screen_Shot_20171210155209.png