Related
hi everyone, i have researched on this for hours and idk what to do.. I am using KIW-AL10 chinese version. It recently got updates to MM with EMUI 4.0.1. i installed TWRP. made the full backup wiped all the partitions and installed cm 13 but it is stuck in bootloop. It reaches the CM bootup screen but reboots. i reflashed my stock MM and tried again but no use. The stock firmware is B430. I even tried flashing the boot.img again but no use. Please guide me in how can i install custom roms. I tried cm 14.1 also but same results. Thanks for the help
sublimeace said:
hi everyone, i have researched on this for hours and idk what to do.. I am using KIW-AL10 chinese version. It recently got updates to MM with EMUI 4.0.1. i installed TWRP. made the full backup wiped all the partitions and installed cm 13 but it is stuck in bootloop. It reaches the CM bootup screen but reboots. i reflashed my stock MM and tried again but no use. The stock firmware is B430. I even tried flashing the boot.img again but no use. Please guide me in how can i install custom roms. I tried cm 14.1 also but same results. Thanks for the help
Click to expand...
Click to collapse
Downgrade to B350 or until B310. That will fix it.
Sent from my honor 5X using XDA Labs
adriansticoid said:
Downgrade to B350 or until B310. That will fix it.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
430 also causes bootloop?? i thought it was b360 and b370, only for indian variant!
adriansticoid said:
Downgrade to B350 or until B310. That will fix it.
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
i am on chinese variant.. KIW-AL10. Can i downgrade to those?? are those marshmallow firmwares? Thanks for the reply
some help guys, please!
sublimeace said:
some help guys, please!
Click to expand...
Click to collapse
downgrade to much previous firmware and try flashing custom roms.. will work
thilak devraj said:
downgrade to much previous firmware and try flashing custom roms.. will work
Click to expand...
Click to collapse
I reverted back to lolipop and now going to try and flash B422 for AL-10. I'll post back if that works
sublimeace said:
I reverted back to lolipop and now going to try and flash B422 for AL-10. I'll post back if that works
Click to expand...
Click to collapse
i would hightly suggest you flash something like B3xx..
thilak devraj said:
i would hightly suggest you flash something like B3xx..
Click to expand...
Click to collapse
aren't they for L21 and L22?
sublimeace said:
aren't they for L21 and L22?
Click to expand...
Click to collapse
there aren't for your model??
what is the beginning marshmallow firmware for your model??
thilak devraj said:
there aren't for your model??
what is the beginning marshmallow firmware for your model??
Click to expand...
Click to collapse
noooooooo! my model if KIW-AL10!! that's why i am having so much problem with it. and the update i got was b430. but i can find B422 and B427.. so i think i'll revert to lolipop and try flashing those.
sublimeace said:
noooooooo! my model if KIW-AL10!! that's why i am having so much problem with it. and the update i got was b430. but i can find B422 and B427.. so i think i'll revert to lolipop and try flashing those.
Click to expand...
Click to collapse
then try b422
thilak devraj said:
then try b422
Click to expand...
Click to collapse
hey, so i am running lolipop B254. and when i try to update to MM B419, it fails at about 15 to 20%. i read on some chinese firmware that it needs to be on B419. Its an OTA update and i have made a dload folder in my sd card and copied to update.zip file. but it fails everytime. what could be the problem?
sublimeace said:
hey, so i am running lolipop B254. and when i try to update to MM B419, it fails at about 15 to 20%. i read on some chinese firmware that it needs to be on B419. Its an OTA update and i have made a dload folder in my sd card and copied to update.zip file. but it fails everytime. what could be the problem?
Click to expand...
Click to collapse
I don't know, this is a.strange issue.. May be 419 is not the beginning build of marshmallow
In case somebody in this thread is interested in a solution, I managed to install LineageOS on a Honor 5X KIW-AL10 with the latest stock firmware KIW-AL10C92B437.
Once you have unlocked the bootloader, flash TWRP with adb, you need to flash Lineage OS & a zip that will fix the loop (see: https://jira.lineageos.org/browse/BUGBASH-222?attachmentViewMode=list). I used Fix_boot(422+).zip. Voilà!
sidgboy said:
In case somebody in this thread is interested in a solution, I managed to install LineageOS on a Honor 5X KIW-AL10 with the latest stock firmware KIW-AL10C92B437.
Once you have unlocked the bootloader, flash TWRP with adb, you need to flash Lineage OS & a zip that will fix the loop (see: https://jira.lineageos.org/browse/BUGBASH-222?attachmentViewMode=list). I used Fix_boot(422+).zip. Voilà!
Click to expand...
Click to collapse
woohoo thx im looking for this
and now my honor can boot properly
i've flashed 2 custom roms but always bootloop so many thx
Put a new stock ROM of your previous version
sublimeace said:
hi everyone, i have researched on this for hours and idk what to do.. I am using KIW-AL10 chinese version. It recently got updates to MM with EMUI 4.0.1. i installed TWRP. made the full backup wiped all the partitions and installed cm 13 but it is stuck in bootloop. It reaches the CM bootup screen but reboots. i reflashed my stock MM and tried again but no use. The stock firmware is B430. I even tried flashing the boot.img again but no use. Please guide me in how can i install custom roms. I tried cm 14.1 also but same results. Thanks for the help
Click to expand...
Click to collapse
I have suffered this same issue previously,
Put a new stock ROM of your previous version you had , download it from huawei website in sdcard and put that sdcard in your phone. And follow the procedure to how to install a stock ROM
Murtaza Latiwala said:
I have suffered this same issue previously,
Put a new stock ROM of your previous version you had , download it from huawei website in sdcard and put that sdcard in your phone. And follow the procedure to how to install a stock ROM
Click to expand...
Click to collapse
I made this guide after being stuck on AL10 with no info anywhere so I solved the problem, good luck
https://forum.xda-developers.com/honor-5x/how-to/solution-to-downgrade-netcom-al10-3gb-t3718355
I've attempted to flash resurrection remix rom v6.1 and also tried 6.0 on my Xiaomi redmi note 4 (snapdragon) but it gave me the Error:7.
What do I do? I have no backups and the official site for MIUI rom is down for maintenance.
I need help urgently, Thank You.
meeds said:
I've attempted to flash resurrection remix rom v6.1 and also tried 6.0 on my Xiaomi redmi note 4 (snapdragon) but it gave me the Error:7.
What do I do? I have no backups and the official site for MIUI rom is down for maintenance.
I need help urgently, Thank You.
Click to expand...
Click to collapse
You flashed with a non treble recovery. Use this and flash.
https://drive.google.com/a/my.smccd.edu/uc?id=1DXuos3BhwqaReN54AFB6mVWH7G67ip2a&export=download
donkeey_kong said:
You flashed with a non treble recovery. Use this and flash.
https://drive.google.com/a/my.smccd.edu/uc?id=1DXuos3BhwqaReN54AFB6mVWH7G67ip2a&export=download
Click to expand...
Click to collapse
Worked it out by removing the assert column. Thanks anyways.
donkeey_kong said:
You flashed with a non treble recovery. Use this and flash.
https://drive.google.com/a/my.smccd.edu/uc?id=1DXuos3BhwqaReN54AFB6mVWH7G67ip2a&export=download
Click to expand...
Click to collapse
I have the error 7 if I flash this via twrp will that sort it out ?
stevegtrlmk said:
I have the error 7 if I flash this via twrp will that sort it out ?
Click to expand...
Click to collapse
Yes it will.
I have my 7t pro from china and it's running h2os 10.0.3 now! after I downloaded oos 10.0.4 international version I notice I can't upgrade from h2os ,it says my system has a higher version the oos zip.
so i wander how i can flash the full update zip via twrp?
I tried it in twrp by sideload function but doesn't work!
https://forum.xda-developers.com/7t-pro/how-to/op7tpro-unbrick-tool-to-restore-device-t4002909
This should be can help
xiaNLJ said:
I have my 7t pro from china and it's running h2os 10.0.3 now! after I downloaded oos 10.0.4 international version I notice I can't upgrade from h2os ,it says my system has a higher version the oos zip.
so i wander how i can flash the full update zip via twrp?
I tried it in twrp by sideload function but doesn't work!
Click to expand...
Click to collapse
You could downgrade your os then try local update with 10.0.14
ricky886 said:
https://forum.xda-developers.com/7t-pro/how-to/op7tpro-unbrick-tool-to-restore-device-t4002909
This should be can help
Click to expand...
Click to collapse
I get it done! thanks mate~
jaythenut said:
You could downgrade your os then try local update with 10.0.14
Click to expand...
Click to collapse
after backup my data~its done now,thanks~
Anybody have TWRP for Mi Mix4 with Android 12?
TWRP Is not available for android 12 yet.
now？
What do you mean TWRP is not avaialable for android 12 yet ?!?!
I have Android 12 on MIUI13(weekly xiaomi.eu), and I booted to twrp via fastboot.
Didn't flash the partition, but still...
Blitzz.666 said:
What do you mean TWRP is not avaialable for android 12 yet ?!?!
I have Android 12 on MIUI13(weekly xiaomi.eu), and I booted to twrp via fastboot.
Didn't flash the partition, but still...
Click to expand...
Click to collapse
Hello,
On the xiaomi.eu website, MIUI 13 is only available for fastboot, not for twrp.
CoCooN^ said:
Hello,
On the xiaomi.eu website, MIUI 13 is only available for fastboot, not for twrp.
Click to expand...
Click to collapse
I know, but I had MIUI 12.5 with TWRP and flashed the MIUI 13 beta via TWRP. so...I had MIUI13 A12 with TWRP.
Yep, official is working for me. Tethered only but working Magisk installed
Blitzz.666 said:
I know, but I had MIUI 12.5 with TWRP and flashed the MIUI 13 beta via TWRP. so...I had MIUI13 A12 with TWRP.
Click to expand...
Click to collapse
How did you do that? The MIUI 13 zip have the files for fastboot, not recovery! Can you explain?
Mrdream94 said:
How did you do that? The MIUI 13 zip have the files for fastboot, not recovery! Can you explain?
Click to expand...
Click to collapse
Mrdream94 said:
How did you do that? The MIUI 13 zip have the files for fastboot, not recovery! Can you explain?
Click to expand...
Click to collapse
I can't be more clear than that. I had MIUI 12.5 xiaomi.eu stable, with TWRP, downloaded MIUI 13 beta China(in zip file), flashed it on top of the current firmware. Then I had MIUI13 beta china with TWRP...but switched to stock recovery due to fastboot rom xiaomi.eu weekly and lack of zip roms.
Blitzz.666 said:
I can't be more clear than that. I had MIUI 12.5 xiaomi.eu stable, with TWRP, downloaded MIUI 13 beta China(in zip file), flashed it on top of the current firmware. Then I had MIUI13 beta china with TWRP...but switched to stock recovery due to fastboot rom xiaomi.eu weekly and lack of zip roms.
Click to expand...
Click to collapse
Ah ok, I meant that the xiaomi EU 13 is only for fastboot, this was my doubt
Hi all
Where can i get xiaomi mi pad 5 pro 12.4 original stock rom. and how do i flash it.
Thankyou
Regards Chris
chris_t462000 said:
Hi all
Where can i get xiaomi mi pad 5 pro 12.4 original stock rom. and how do i flash it.
Thankyou
Regards Chris
Click to expand...
Click to collapse
There are several models.
Settings/my phone/detailed info/model .
Example: M2105K81C
NOSS8 said:
There are several models.
Settings/my phone/detailed info/model .
Example: M2105K81C
Click to expand...
Click to collapse
MIUI Global 13.1.4.0(SLZCNXM)
chris_t462000 said:
MIUI Global 13.1.4.0(SLZCNXM)
Click to expand...
Click to collapse
This was not the expected response. Nevermind.
Xiaomi Pad 5 Pro 12.4 (dagu).
rom: https://xiaomifirmwareupdater.com/archive/miui/dagu/
Installing Fastboot roms
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Recovery with a Twrp/O.f if existing.
The bootloader must be unlocked.
NOSS8 said:
This was not the expected response. Nevermind.
Xiaomi Pad 5 Pro 12.4 (dagu).
rom: https://xiaomifirmwareupdater.com/archive/miui/dagu/
Installing Fastboot roms
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Recovery with a Twrp/O.f if existing.
The bootloader must be unlocked.
Click to expand...
Click to collapse
Is the rom original firmware?
chris_t462000 said:
Is the rom original firmware?
Click to expand...
Click to collapse
Of course.Provided by(Recognized Developer).
yshalsager
forum.xda-developers.com
NOSS8 said:
Of course.Provided by(Recognized Developer).
yshalsager
forum.xda-developers.com
Click to expand...
Click to collapse
will it update ota
chris_t462000 said:
will it update ota
Click to expand...
Click to collapse
What do you mean?
the OTA is done from your device.
What i mean is i will be notified on the phone when there is an update
chris_t462000 said:
What i mean is i will be notified on the phone when there is an update
Click to expand...
Click to collapse
If the OTA works on your device with a stock rom, it will still work.
NOSS8 said:
If the OTA works on your device with a stock rom, it will still work.
Click to expand...
Click to collapse
I looked inside the rom and its a custom rom is there no way to download an original rom
chris_t462000 said:
I looked inside the rom and its a custom rom is there no way to download an original rom
Click to expand...
Click to collapse
Which rom(full name)?
NOSS8 said:
Which rom(full name)?
Click to expand...
Click to collapse
the one you recommended
chris_t462000 said:
the one you recommended
Click to expand...
Click to collapse
These roms are the roms provided by Xiaomi, 100% original.
You can check the hash without any problem.
You should via OTA go to V13.1.6.0.SLZCNXM or V13.1.7.0.SLZCNXM but sometimes no OTA.
If you install the latest use Miflash with a Fastboot rom or downloaded the rom and manually update it via OTA.
What makes you say it's a custom rom?
_________________________________________________________________________________________________________________________
Device: Xiaomi Pad 5 Pro 12.4 China
Codename: dagu
Version: V13.1.7.0.SLZCNXM
Branch: Stable
Type: Fastboot
Size: 5.2 GB
Release Date: 2022-10-17
Package Name: dagu_images_V13.1.7.0.SLZCNXM_20221017.0000.00_12.0_cn_d908fe27b2.tgz
MD5: d908fe27b205c4aea4dfa9b3bf536402
NOSS8 said:
These roms are the roms provided by Xiaomi, 100% original.
You can check the hash without any problem.
You should via OTA go to V13.1.6.0.SLZCNXM or V13.1.7.0.SLZCNXM but sometimes no OTA.
If you install the latest use Miflash with a Fastboot rom or downloaded the rom and manually update it via OTA.
What makes you say it's a custom rom?
_________________________________________________________________________________________________________________________
Device: Xiaomi Pad 5 Pro 12.4 China
Codename: dagu
Version: V13.1.7.0.SLZCNXM
Branch: Stable
Type: Fastboot
Size: 5.2 GB
Release Date: 2022-10-17
Package Name: dagu_images_V13.1.7.0.SLZCNXM_20221017.0000.00_12.0_cn_d908fe27b2.tgz
MD5: d908fe27b205c4aea4dfa9b3bf536402
Click to expand...
Click to collapse
Thankyou your most helpful
chris_t462000 said:
Thankyou your most helpful
Click to expand...
Click to collapse
Hi
Just Flashed your rom nice, was wondering if there is a global version?
chris_t462000 said:
Hi
Just Flashed your rom nice, was wondering if there is a global version?
Click to expand...
Click to collapse
Nope, this version is intended only for the Chinese market.
Trying to view an AOSP rom like Lineage
If your OEM unlocked download the tgz from xiaomi firmware updater and boot to fastboot with the little commie bunny and to ./flash_all.sh on Linux then fastboot -w and fastboot reboot. Don't do flash_all_lock.sh otherwise you'll OEM lock the device.
Austcool said:
If your OEM unlocked download the tgz from xiaomi firmware updater and boot to fastboot with the little commie bunny and to ./flash_all.sh on Linux then fastboot -w and fastboot reboot. Don't do flash_all_lock.sh otherwise you'll OEM lock the device.
Click to expand...
Click to collapse
I don't recommend using a rom outside of the rom made by the OEM. Also DO NOT USE LINUX BUILT IN FASTBOOT FROM DEBIAN/UBUNTU REPOS IT'LL BRICK IT! download the Google ones from the website instead.
NOSS8 said:
Nope, this version is intended only for the Chinese market.
Trying to view an AOSP rom like Lineage
Click to expand...
Click to collapse
Try out Lineage OS, or a pixel experience GSI. It runs well.
- Matt @ N3RDP0RT4L.