I am not on Android P dp1 but made some mods based on the Android P apks.
Clock mods
Navbar height adjustment 30-48 dip
Internet Speed indicators
Battery icon remover
3 Minit Battery Mod (install MinitBatteryResources.apk first)
Enabled stock WiFi-Data in-out arrows
Custom one percent batteries
Colored statusbar icons
Colored Notification Backgrounds
Colored Notification Text
Colored QS backgrounds
Colored QS text
3,4,5,6,7 column QS tiles
Navbar swap of back and recents
Invisible power menu button in far right hand corner of statusbar. Tap closes the screen, long press brings up the power button menu.
Remove carrier text
Remove NavBar completely, choices of 3,4,5,6,7 column QS.
Invisible home button on far left of status bar option in case LMT or other mods don't start on reboot.
Flash the base first. It is in the first menu. After that you can flash away. No need to boot between flashing. There is a stock restore option as well.
Edit: AOD version clocks show up on lockscreen instead of the system icons. Can't seem to get all off together.
Aroma dp1
https://www.androidfilehost.com/?fid=818070582850506348
Tulsadiver said:
I am not on Android P dp1 but made some mods based on the Android P apks.
Aroma dp1
https://www.androidfilehost.com/?fid=818070582850506157
Click to expand...
Click to collapse
Thank you for this. I'm not on P right now or I would just flash and find out, but can you give any insight as to what is included?
Thanks again for sharing. :good:
Namolas said:
Thank you for this. I'm not on P right now or I would just flash and find out, but can you give any insight as to what is included?
Thanks again for sharing. :good:
Click to expand...
Click to collapse
My bad. Updated op. Same as my other aroma thread.
Thanks for this. Find a little bug.
Whatever option I choose for center clock (day /am/pm) I always got 2 clocks on status bar when I boot up.
See the screenshot.
I m on P Of course.
If u need any log let me know.
Tulsadiver said:
My bad. Updated op. Same as my other aroma thread.
Click to expand...
Click to collapse
I was really interested in trying this so I flashed the Android P preview to both slots, boot and set up as new device. But then after installing the mod installer I am getting "Your device is corrupt" prompt several times and then it doesn't boot.
Any idea how to avoid this or what caused it?
EDIT: Thought I could just boot back into recovery and flash the stock restore option but I can't get into recovery at all. Even fastboot TWRP image just gets me to the "Your device is corrupt." screen and I cannot proceed. No big deal as I have everything backed up properly, but just wondering how to avoid this next time?
Namolas said:
I was really interested in trying this so I flashed the Android P preview to both slots, boot and set up as new device. But then after installing the mod installer I am getting "Your device is corrupt" prompt several times and then it doesn't boot.
Any idea how to avoid this or what caused it?
EDIT: Thought I could just boot back into recovery and flash the stock restore option but I can't get into recovery at all. Even fastboot TWRP image just gets me to the "Your device is corrupt." screen and I cannot proceed. No big deal as I have everything backed up properly, but just wondering how to avoid this next time?
Click to expand...
Click to collapse
Did you flash 3minit battery? Did you flash a base first?
dukat0s said:
Thanks for this. Find a little bug.
Whatever option I choose for center clock (day /am/pm) I always got 2 clocks on status bar when I boot up.
See the screenshot.
I m on P Of course.
If u need any log let me know.
Click to expand...
Click to collapse
The clock is in a different place. Forgot about that. I'll try and fix that and rerun my aroma.
What happens if you choose a right side clock?
Tulsadiver said:
The clock is in a different place. Forgot about that. I'll try and fix that and rerun my aroma.
What happens if you choose a right side clock?
Click to expand...
Click to collapse
Gimme a sec I try it
Tulsadiver said:
Did you flash 3minit battery? Did you flash a base first?
Click to expand...
Click to collapse
Didn't flash any 3 minute battery stuff. Yes flashed the base first unless I misunderstood how that works. You said flashing base would be at the end but it's the very first thing you have to do before it will continue.
I chose,
WiFi data arrows
30 point navbar
Swap navbar buttons
Remove battery icon
7 column QS tile
Tulsadiver said:
The clock is in a different place. Forgot about that. I'll try and fix that and rerun my aroma.
What happens if you choose a right side clock?
Click to expand...
Click to collapse
Here my friend. If I choose right side clock its work fine
Namolas said:
Didn't flash any 3 minute battery stuff. Yes flashed the base first unless I misunderstood how that works. You said flashing base would be at the end but it's the very first thing you have to do before it will continue.
I chose,
WiFi data arrows
30 point navbar
Swap navbar buttons
Remove battery icon
7 column QS tile
Click to expand...
Click to collapse
It is possible to skip selecting a base so you don't have to start from scratch each time to add or change a mod. Which base did you pick?
Tulsadiver said:
It is possible to skip selecting a base so you don't have to start from scratch each time to add or change a mod. Which base did you pick?
Click to expand...
Click to collapse
So I started again from fresh factory image again just now,
Flash "SystemUIbase Signal"
Next, Next, Install.
Then Install in TWRP again, this time choosing,
"Traffic Speed Single" Traffic Right,
"Navbar Height" Dynam30,
"Navbar" Swap Navbar Swap 30,
"Remove Battery Icon" Remove Battery Icon7 Col QS WiFi up-down,
"QS Column Options" SystemUI7QS Column
Next, Install, Reboot
Your Device is corrupt!
Namolas said:
So I started again from fresh factory image again just now,
Flash "SystemUIbase Signal"
Next, Next, Install.
Then Install in TWRP again, this time choosing,
"Traffic Speed Single" Traffic Right,
"Navbar Height" Dynam30,
"Navbar" Swap Navbar Swap 30,
"Remove Battery Icon" Remove Battery Icon7 Col QS WiFi up-down,
"QS Column Options" SystemUI7QS Column
Next, Install, Reboot
Your Device is corrupt!
Click to expand...
Click to collapse
Flash again and flash stock. Try those again minus traffic speed.
Tulsadiver said:
Flash again and flash stock. Try those again minus traffic speed.
Click to expand...
Click to collapse
Ok. I tried again without the traffiic indicators.. Same result. Sorry to muddy up your thread.... I'm just gonna let it go. Log is attached if it gives you any helpful info.
Thanks for all your help.
EDIT: So its driving me nuts that this isn't working for me so I tried again. Flashed P to both slots WITH wipe ( I NEVER flash without the -w), setup, boot TWRP and installed just the base and reboot and I get the corrupt device error. Got that log too but its too big to upload.
So I can't even get past flashing the base. Seeing as how nobody else is having the problem it must be something I am doing specifically. (although I can't see any fault in my flashing methods). I'm happy to try anything anybody suggests but as things sit now, I give up.
dukat0s said:
Thanks for this. Find a little bug.
Whatever option I choose for center clock (day /am/pm) I always got 2 clocks on status bar when I boot up.
See the screenshot.
I m on P Of course.
If u need any log let me know.
Click to expand...
Click to collapse
Can you try this one? Just trying some things.
https://www.androidfilehost.com/?fid=818070582850506348
Tulsadiver said:
Can you try this one? Just trying some things.
https://www.androidfilehost.com/?fid=818070582850506348
Click to expand...
Click to collapse
Thanks this work great.
Namolas said:
Ok. I tried again without the traffiic indicators.. Same result. Sorry to muddy up your thread.... I'm just gonna let it go. Log is attached if it gives you any helpful info.
Thanks for all your help.
EDIT: So its driving me nuts that this isn't working for me so I tried again. Flashed P to both slots WITH wipe ( I NEVER flash without the -w), setup, boot TWRP and installed just the base and reboot and I get the corrupt device error. Got that log too but its too big to upload.
So I can't even get past flashing the base. Seeing as how nobody else is having the problem it must be something I am doing specifically. (although I can't see any fault in my flashing methods). I'm happy to try anything anybody suggests but as things sit now, I give up.
Click to expand...
Click to collapse
If you flash 7 column remove battery, do not flash the SystemUI 7 column qs at the bottom. I probably should move that option up to the top. That is really for people that are only interested in a 7 col mod and nothing else. Also, you can only select one option per section. It appears you are trying to select more than one in some. Only the last one selected will install.
Hi Tudaviser,
Is there any way to apply different color to different QS toggles only for the round background (e.g wifi and mobile data are blue, battery is green...)?
Related
Hello, I'm trying to find a way to put that cool circular battery I see in many screenshots in my status/notification bar. I found this cool website: circle [dot] glx [dot] nl.
However the zip file it returned caused a bootloop on my device. Every time, the phone boots so far that I can see the new icon, but then it crashes and automatically reboots. Do you know how could I solve this annoying bug? Is there an alternative (and safer) way to replace the battery icon in the notification bar?
riva.dani said:
Hello, I'm trying to find a way to put that cool circular battery I see in many screenshots in my status/notification bar. I found this cool website: circle [dot] glx [dot] nl.
However the zip file it returned caused a bootloop on my device. Every time, the phone boots so far that I can see the new icon, but then it crashes and automatically reboots. Do you know how could I solve this annoying bug? Is there an alternative (and safer) way to replace the battery icon in the notification bar?
Click to expand...
Click to collapse
Try connect via adb shell with
adb bugreport and look what it shows you. Maybe you find something.
The_ERROR said:
Try connect via adb shell with
adb bugreport and look what it shows you. Maybe you find something.
Click to expand...
Click to collapse
Well, there will be almost 20 pages of output in there... I really don't know where to look. Is this helpful?
Code:
------ DUMPSYS (dumpsys) ------
Currently running services:
lgdrm
media.audio_flinger
media.audio_policy
media.camera
media.player
nexdrmservice
-------------------------------------------------------------------------------
DUMP OF SERVICE lgdrm:
-------------------------------------------------------------------------------
DUMP OF SERVICE media.audio_flinger:
I tried different times with different themes, but the outcome is always the same. Last time I even trid to re-sign the zip before flashing, but it didn't help at all. I'll be in need of a new Volume Down button very soon...
riva.dani said:
I tried different times with different themes, but the outcome is always the same. Last time I even trid to re-sign the zip before flashing, but it didn't help at all. I'll be in need of a new Volume Down button very soon...
Click to expand...
Click to collapse
Do you use this with the stock ROM? I think this won't work because it is not deodexed. Try flashing my AmberHome 1.1 ROM (this is completely deodexed) and then flash your battery icon zip.
corwin42 said:
Do you use this with the stock ROM? I think this won't work because it is not deodexed. Try flashing my AmberHome 1.1 ROM (this is completely deodexed) and then flash your battery icon zip.
Click to expand...
Click to collapse
Thanks, I'll give it a shot asap, even if I have no idea of what deodexed means.
Any news?
riva.dani said:
Thanks, I'll give it a shot asap, even if I have no idea of what deodexed means.
Click to expand...
Click to collapse
What is deodexed? I didn't know that too.
Check up on this!
LINK
you can check out this thread:
http://forum.xda-developers.com/showthread.php?t=953648
Hi. Wanna ask for something again. I want ot have full reboot menu (with Power Off, Reboot, and CWM) and the Small apps at same time. But i cant do this, because when im installing Reboot menu mods, my small apps and Xperia S lockscreen disappearing and changing to stock ones. How i can include this menu (on russian) to small-aps compatible framework-res? (what file i must edit?)
Sorry, i'm total noob, and it's my first day here.
at first day you are daring to edit framework-res.apk...really???
http://forum.xda-developers.com/showpost.php?p=32656670&postcount=601
reebot working ,,,flash this 3 dot menu
sankoranga said:
http://forum.xda-developers.com/showpost.php?p=32656670&postcount=601
reebot working ,,,flash this 3 dot menu
Click to expand...
Click to collapse
Here don't work on Pestanod v4. i don't have menu with reboot and reboot recolvery
jobayer said:
at first day you are daring to edit framework-res.apk...really???
Click to expand...
Click to collapse
Yeah, so what, i'm HERE first day but i have many work in this way already
eltonpestana said:
Here don't work on Pestanod v4. i don't have menu with reboot and reboot recolvery
Click to expand...
Click to collapse
im on real ics 6 working for me....
Translate by @Lafirel, Thanks.
Based on 6.2.A.1.100 official, add some new features, UI improved. All functions should work.
X.A.H ROM
1. Ported from LT22I6.2.A.1.100.
2. Add SuperSU and binary files
3. RE r/w fixed
4. Speaker’s voice fixed, mic fixed
5. Front camera fixed
6. Ambient light sensor fixed
7.Advance power menu
8.Remove lock screen vibration
9 .Remove income call avatar
10.Add data info to status bar
11.Lock screen UI improved
12. The status bar brightness control now can adjust led bar intensity
13. Shutters lock screen removed
14.Led bar fixed
15. Stuck on second boot fixed
16. Long press the home button to show immediate tasks, add “one key ram clean” button.
17. Add ram info when you long press home button.
18.Fix in some device touch not working
Kernel
1.Based on 6.2.A.1.100
2.Auto ROOT
3. Init.d support
4. init.d script support
5. Preinstalled Wi-Fi Modules
6. LZO Compressed zImage
7.LED bar fixed
Recovery
1.Based on CWM 6.0.2.8
2.Remove excess “no” option, when you flash some zip, there are only yes or no choice, I hope you know what I mean, or just try it.
3.Replace background picture.
4 .Support USB mount SD card
How to install
1.Download XAH, put it in SD card.
2.Reboot to recovery.
3.Full wipe
4.Flash the XAH zip.
5.Reboot, after about 2 minutes, REMOVE your battery from XU to make it power off , and then put the battery back and reboot again, then it will boot successfully.(I will fix this in the future, but now you have to do this)
Download: http://d-h.st/OcM
Google APPS download: http://d-h.st/U1y
Kernel source code : https://github.com/xiangxin19960319/xiangxin
waww,,, downloading,,,
Seems Promising Downloading..
ιits very fast
god ram 169mb at start up
missing quick settings and extended power menu
but its fast and stable
sv2hqx said:
ιits very fast
god ram 169mb at start up
missing quick settings and extended power menu
but its fast and stable
Click to expand...
Click to collapse
did u used experimental kernel or xiangxin's kernel ????
viki_beginner said:
did u used experimental kernel or xiangxin's kernel ????
Click to expand...
Click to collapse
xiangxin
sv2hqx said:
xiangxin
Click to expand...
Click to collapse
that was quick thank you..
viki_beginner said:
that was quick thank you.. where is the link i don't find that in OP..
is it in his other ROm ?
and do we have to do below steps ??
Recovery
1.Based on CWM 6.0.2.8
2.Remove excess “no” option, when you flash some zip, there are only yes or no choice, I hope you know what I mean, or just try it.
3.Replace background picture.
4 .Support USB mount SD card
Click to expand...
Click to collapse
Download: http://d-h.st/OcM
Google APPS download: http://d-h.st/U1y
just flash both
if you want you can extract kernel from zip and flash separately
there is no link only for kernel
Good work...
Yeah nice.. ROm.. the Brightnes slidebar.. :good: @xx214718247
Rom is Smooth and fast No lag i see.. till now...
Battery Life is Normal...
Small apps missing..
+ Beautiful Wallpapers.. brother loved them..
Good Work..
Anyone can provide the kernel for led bar working??
Sent from my ST25i using xda premium
bibhu059 said:
Anyone can provide the kernel for led bar working??
Sent from my ST25i using xda premium
Click to expand...
Click to collapse
updater-script:
package_extract_file("kernel.elf", "/dev/block/mmcblk0p9");
package_extract_file("kernelxx.elf", "/dev/block/mmcblk0p13");
which one do u need?
mohammadagha said:
updater-script:
package_extract_file("kernel.elf", "/dev/block/mmcblk0p9");
package_extract_file("kernelxx.elf", "/dev/block/mmcblk0p13");
which one do u need?
Click to expand...
Click to collapse
Give me both..I will try on my rom
Sent from my ST25i using xda premium
bibhu059 said:
Give me both..I will try on my rom
Sent from my ST25i using xda premium
Click to expand...
Click to collapse
http://d-h.st/yg9
impossible to enter in recovery mode via vol+
any idea?
zuNN said:
impossible to enter in recovery mode via vol+
any idea?
Click to expand...
Click to collapse
keep press vol- during boot bro.
Lafirel said:
keep press vol- during boot bro.
Click to expand...
Click to collapse
thanks
i dont know if it is a bug or a feature... when i pull down the notification bar, the status bar is hidden.
is it possible to keep the status bar when the notification panel is open??
(visible on screenshot in the first post)
what is the difference from v4? and why dont you update it all in one thread?
jatinrungta said:
what is the difference from v4? and why dont you update it all in one thread?
Click to expand...
Click to collapse
more wall papers, more speed but in settings <more<mobilenetworks<no wdcma/gsm option is missing, every time we have to select 2g or 3g via net work operator, @jatinrungta, can u help me how to get this option in mobile networks, and sim services r also missing in apps(i am using BSNL Sim), he added some tweaks also, i think, i hope u will help me, thank u.
guyz.z.z i'm unable to boot this ROM?
stuck at bootanimation...
i tried several time flashing...
does this hapened to anybody else?
and yes i've tied this method
"
5.Reboot, after about 2 minutes, REMOVE your battery from XU to make it power off , and then put the battery back and reboot again, then it will boot successfully.(I will fix this in the future, but now you have to do this)""
regards
kantry123
I recently installed RomAur from here http://forum.xda-developers.com/showthread.php?t=2723935 on my Xperia Z2 and it has been working well.
However, the ROM appears to default the statusbar clock into the center, and if possible I'd like to shift it back to the right.
I have checked all the xposed module settings to see if changing things there would help, but it doesn't seem to.
Does anybody know where I might find the setting for this?
Thank you kindly for reading, and I can of course provide additional information if it'll help.
lordmeerkat said:
I recently installed RomAur from here http://forum.xda-developers.com/showthread.php?t=2723935 on my Xperia Z2 and it has been working well.
However, the ROM appears to default the statusbar clock into the center, and if possible I'd like to shift it back to the right.
I have checked all the xposed module settings to see if changing things there would help, but it doesn't seem to.
Does anybody know where I might find the setting for this?
Thank you kindly for reading, and I can of course provide additional information if it'll help.
Click to expand...
Click to collapse
Reflash the ROM without wipe and make sure you uncheck the "center clock" option in AROMA.:good:
rowlers said:
Reflash the ROM without wipe and make sure you uncheck the "center clock" option in AROMA.:good:
Click to expand...
Click to collapse
Thank you for the super quick reply! I had tried this, but I tried it again just now to make sure I hadn't messed it up the first time.
Unfortunately this did not work. However, I did a full wipe and reflashed and this did indeed fix the clock.
Thanks again mate. Feel free to resolve/close thread.
lordmeerkat said:
Thank you for the super quick reply! I had tried this, but I tried it again just now to make sure I hadn't messed it up the first time.
Unfortunately this did not work. However, I did a full wipe and reflashed and this did indeed fix the clock.
Thanks again mate. Feel free to resolve/close thread.
Click to expand...
Click to collapse
Next time use gravity box to center clock. That way you can turn it on and off without flashing.
Hello World,
I have been on pac_quincyatt-nightly for a while now, my last version/update was pac_quincyatt-nightly-20140710 and had camera issues (resolved) but screen flickering, which XDA helped me and mentioned go into developer options and check HW Overlay box....having similar issue in latest update but not as bad. Flickers when using keyboard on any app, and wallpaper flickers.
1. how to keep HW overlay option permanently checked?
2. Anyone else have random freezing? (I leave roms/settings stock and close/exit unused apps constant)
sincerely,
The Noob
Pac_QuincyATT-Nightly-20140825
4.4.4RC-1
3.0.101-Cyanogenmod-g21fdfb2 (Monday 25 aug 14)
hehe figured out how to get developer options by accident honest truth...
si1entONE said:
Hello World,
I have been on pac_quincyatt-nightly for a while now, my last version/update was pac_quincyatt-nightly-20140710 and had camera issues (resolved) but screen flickering, which XDA helped me and mentioned go into developer options and check HW Overlay box....having similar issue in latest update but not as bad. Flickers when using keyboard on any app, and wallpaper flickers.
1. how to keep HW overlay option permanently checked?
2. Anyone else have random freezing? (I leave roms/settings stock and close/exit unused apps constant)
sincerely,
The Noob
Pac_QuincyATT-Nightly-20140825
4.4.4RC-1
3.0.101-Cyanogenmod-g21fdfb2 (Monday 25 aug 14)
hehe figured out how to get developer options by accident honest truth...
Click to expand...
Click to collapse
Download and flash this in recovery.. http://forum.xda-developers.com/showthread.php?t=2741733
Its an aroma installer with many options..one being disable he overlays..FYI..uber kernel never ran great for me with PAC nightlies. So I just stuck with original kernel during aroma install.
Don't forget to thank pollution.
Gil81 said:
Download and flash this in recovery.. http://forum.xda-developers.com/showthread.php?t=2741733
Its an aroma installer with many options..one being disable he overlays..FYI..uber kernel never ran great for me with PAC nightlies. So I just stuck with original kernel during aroma install.
Don't forget to thank pollution.
Click to expand...
Click to collapse
Thank you for the link, directions are simple a little to simple to be true. I installed what I wanted and even flashed cache as it was an option. A noob I am and now I have "the process com.android.phone has stopped" now I can not get rid of it. Going back into recovery and see what I can do. Last resort a whole device reflash and then install this patch piece by piece (I only selected what is needed 3 items).
si1entONE said:
Thank you for the link, directions are simple a little to simple to be true. I installed what I wanted and even flashed cache as it was an option. A noob I am and now I have "the process com.android.phone has stopped" now I can not get rid of it. Going back into recovery and see what I can do. Last resort a whole device reflash and then install this patch piece by piece (I only selected what is needed 3 items).
Click to expand...
Click to collapse
Reflash the ROM of choice..clean install ( wipe cache, dalvik cache, data, and system ) not internal or external sdcard.
Let ROM boot and chill for about ten minutes..then reboot recovery and flash pollution aroma. Don't flash the uber kernal..or any other. Just pick disable hw overlays and a boot animation, if you want. Then pick clear cache and dalvik and reboot. Should be good to go. Let me know how it goes.
si1entONE said:
Thank you for the link, directions are simple a little to simple to be true. I installed what I wanted and even flashed cache as it was an option. A noob I am and now I have "the process com.android.phone has stopped" now I can not get rid of it. Going back into recovery and see what I can do. Last resort a whole device reflash and then install this patch piece by piece (I only selected what is needed 3 items).
Click to expand...
Click to collapse
Gil is giving some solid advice. The only thing I might add is flashing the rom once by itself, then flash the rom again with the gapps. you can get 2 different results from 2 different flashes. It merely helps embed the rom in a bit better.
I rarely have issues with my cleanliness.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app