I have Xiaomi Redmi Note 4 Nikel MTK (MediaTek) 64GB ROM with Global MIUI 8.0.5.0
my phone has China Mobile 4G LTE logo at its back cover.
i want to Upgrade to STOCK MIUI 9.5 Global ROM with Fastboot on SP Flashtool...
BROM ERROR : STATUS_DEVICE_CTRL_EXCEPTION (0xC0050001)
I always have the same error, and I never find anything about this Error Solution on the Internet. When I try to do a Firmware Upgrade, the red bar stop at 100%, it's not moving for 3 minutes approximatly, and i always get this ERROR:
My Laptop used for Flash ROM is:
- Windows 10 64bit
- SP Flash Tool v5.1804 (downloaded from AndroidMTK.com)
- Android CDC Driver (downloaded from AndroidMTK.com)
I don't know what to do... If someone have a solution... Please Respond
Thank you !
Related
Hi all:
I came to this forum in search for help with mi xiaomi redmi 3 pro.
I bought this phone a few weeks ago, and so far i'm really very happy with it, but unfortunately the rom installed has not my language completely, some parts are in PT/BR and aome in english.
So I would like to install the EU rom that has the full portuguese package included.I have already taken the first steps.Asked to xiaomi permission to unlock bootloader, which was already granted, but this step is my firs problem.I follwoed all the instructions connected the phone in FASTBOOT mode to the PC but whenever it reaches the 50% I get a message saying: "couldn't verify device-not connected to MI phone.try again"
Someone told that this is because I don't have the CHINA DEV installed, and this is my 2nd problem.I have downloaded the last china developer to my phone, I go to config-update-choose update package then I select the downloaded version, but then again I get the message error : can't verify update !!!
And this is it, i'm really blocked !! what to do ?? do I have to root my phone using something like KingoRoot and lose my warranty ??
PLease help me.
Modified bootloader
Try this modified bootloader and then flash xiaomi.eu ROM
sSo if I understood it right I have to do this:
Installation :
1. Unrooted device
- download file ido-TWRP-3.0.2.0-miflash.zip
- extract and flash using miflash in download mode
this will also install official TWRP 3.0.2.0 to the device
and next step I have to instal the xiaomi.eu rom. right ??
Ok after reading a lot I found that to do that I need a PC with a 64 bit windows (mine is 32 )
Besides that for any strange reason I can't onstall the drivers !!!
Hey guys,
I got my RN3 a month ago and since last 2 weeks i am trying to unlock the bootloader using the official method.
I had asked MI for permission and I got it within 3 days. Now since 2 week I am trying to unlock the bootloader but I keep getting the error on MIUnlock "Couldn't verify Device".
I am using the latest MIUnlock version.
I have searched extensively for a solution to the problem but unfortunately all the work arounds are not working for me.
I have tried it on the stock ROM that the phone came with.
The latest stable global ROM from MI V7.3.7.0. MIUI7
The beta global ROM from MI MIUI8
Same error everywhere. The process stops at 50%.
I am skeptical to try the unofficial method since it could brick my phone. But may go through with it if there is no other option.
Basically I want to root the phone and flash a CM13 ROM.
Please help me out
Thanks
Mine had said the same error failed at 50% - mine shipped with miui V7.3.6.0 (some vendor firmware I guess), here is what I did to fix it.
I have the redmi note 3 pro so this will apply only for the kenzo (snapdragon version)- I am not familiar with the mediatek one.
1. Install Xiao Mi Flash (beta) , then boot the phone into fast boot mode (from power off state - hold vol down + power until you see it say fast boot.), in Mi Flash at the bottom select clean all
2. extract the kenzo "fast boot" firmware
http://en.miui.com/a-234.html (find the firmware in the list)
IE:
Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot
(kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global)
3. Select the extracted firmware folder in the Mi Flash program, hook the phone up and you should see it in the list, then click flash to flash it.. (this will erase all data)
after it finishes let it boot up it might take 10-15 minutes, then you can try to unlock it again, at this point it should pass now verification and unlock officially. - after success let it reboot again and it might take another 10-15 minutes to finish up.
(this is because it clears the phone data so it has to re-optimize all the apps).
do at own risk it worked for me but due to all the various methods the vendors use to flash this phone who knows if it will work for everyone...
otyg said:
Mine had said the same error failed at 50% - mine shipped with miui V7.3.6.0 (some vendor firmware I guess), here is what I did to fix it.
I have the redmi note 3 pro so this will apply only for the kenzo (snapdragon version)- I am not familiar with the mediatek one.
1. Install Xiao Mi Flash (beta) , then boot the phone into fast boot mode (from power off state - hold vol down + power until you see it say fast boot.), in Mi Flash at the bottom select clean all
2. extract the kenzo "fast boot" firmware
http://en.miui.com/a-234.html (find the firmware in the list)
IE:
Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot
(kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global)
3. Select the extracted firmware folder in the Mi Flash program, hook the phone up and you should see it in the list, then click flash to flash it.. (this will erase all data)
after it finishes let it boot up it might take 10-15 minutes, then you can try to unlock it again, at this point it should pass now verification and unlock officially. - after success let it reboot again and it might take another 10-15 minutes to finish up.
(this is because it clears the phone data so it has to re-optimize all the apps).
do at own risk it worked for me but due to all the various methods the vendors use to flash this phone who knows if it will work for everyone...
Click to expand...
Click to collapse
hello,
i am not able to use miflash(beta) due to some qualcomm driver error because i am on 32 bit system. Instead i am using miflash 2015 10.28.0 which have 3 options like flash all, flash all except storage ,flash all except data and storage.which one to choose?
look at the image i have attached for your reference
first I suggest installing the Mi PC Suite (just to get the correct drivers installed), then try XiaoMiFlash again
http://en.miui.com/thread-92720-1-1.html
here is the Xiao Mi Flash I used.
http://en.miui.com/thread-281979-1-1.html
MiFlashSetup-Beta.zip (29.53 MB, Downloads: 96818)
I had to link my phone first before the Unlock tool would work. So login into you Mi Account on the phone first.
I had the same problem because i hadnt installed the miui dev rom yet..
the only solution is flashing DEV ROM
it worked for me
Hi, I have a problem with the xiaomi redmi note 3 pro of snapdragon that I can not solve, the issue is that the mobile when it is left in the logo of mi.com and fails to progress, I tried with all the roms in there The official page of xiaomi with miflash, and I do not get any ideas work? , The installation process with miflash finishes correctly, so I do not know where the problem may come from, thank you.
Try flashing stock rom
flash twrp and unlock bootloader (officially or unofficially)
then try rebooting or flash a custom rom
Gl
Friend already I have installed all the developer rom the Chinese, the global and I do not boot, the bootloader has blocked, I do not know what else to do.
hey!
i get my MI note 3 bricked by flashing TWRP recovery ! but then through EDL method i put MIUI 7 on it. it get on but now my network signals are not stable sometimes they show {no service} and sometime one of them get lost I . They not getting any network only {no service}. I dont know what happend to them. Please help me please.
MIUI7 has issues and will lead to loss in mobile networks. Flash latest MIUI8 Global Stable ROM using EDL Mode via latest Mi Flash Tool.
Hello I need help with my Note 5. Downloaded latest global rom and mi flash tool.. entered edl mode with test point and i got a proplem saying "Only nop and sig tag can be recevied before authentication.".... now i assume i need authorized mi account to flash the rom but i dont have one and i see no way of getting one. I am currently on fake rom on a global version of the phone (the one with dual camera xiaomi note 5)
What i want right now is to flash any rom that can request for bootloader unlocking since in this fake rom that is disabled and my loader is locked..
any help?
This forum is for Redmi 5 Plus / Note 5 (India).
Please go there and ask for help for your problem:
https://forum.xda-developers.com/redmi-note-5-pro
Best regards,
skrubxgt
Use EDL mode if your device bricked and it works only with designated rom, china to china and global to global because in this case your bootloader is locked. And before proceeding flashing thru EDL, you have to prepare eveything properly, such as disabling driver signature enforcement and installing correct driver (QD Loader 900D)
So, have you prepared and done all those things properly? 2 days ago I just flashed my device thru EDL due to failure flashing and now my baby is waking up