Related
GidGat™ Ultimate White Edition v6.0 Released by Muzzamil IhsanRom Features
Based on Hyperion Kernel 4.4.2 KitKat
90%White Rom
Free ram 500-600mb
Best Ever Battery Backup
Flux Contacts
Dolby Atmos for Greater Sound Quality
Sound Patch Attached for High Volume
Nexus Boot Animation
Wifi Highly Tweaked
3G on both sims
GidGat Settings
Torch Added
Smoothy Performance Tweaks
and much more better to check in roms.
NOTE
Flash using Philz Recovery
-Flash at your own risk.We are not responsible for bricked devices or any damages caused due to the ROM.You loose warranty whenever you root your device or flash custom ROM's.
-Keep your device 100% charged before flashing any ROM.
-Take a backup from the recovery in case you mess up with something.
-Do not mirror links without permission
-I won't guarantee anything about my ROM. If you like it keep it otherwise the most simple thing you can do is switch to other ROM.
Instructions
Code:
Reboot to recovery
Wipe data factory reset
Clean to install a new rom
yes,i will install new rom
go back and select install zip from sd card
Select GidGat Ultimate white Edition v6
Flash it
Flash Dolby
Flash Any Modem patch if you have week signal strength
Flash Sound Patch
Reboot
Enjoy!
Screenshots:https://www.facebook.com/MuziTechsbyMuzzamil/posts/386634891542616?comment_id=387082144831224¬if_t=feed_comment
Credits: @silence abd @orochi of Turkdevs Forum:highfive: @hyperion70 for his Kernel for MT6589:good: @MuzzamilIhsan (Me) for porting rom:good:
Downloads
Sound Patch :http://d-h.st/CaVU
Dolby Atmos: http://d-h.st/ociP
PhilzTouch Recovery : http://d-h.st/Euf
FAQ:
For Multiwindow: Download and install Xposed Installer then download Xmultiwindow from Xposed Download section install it and reboot
Please Hit Thanks on XDA as I'm working hard to provide some good rom
XDA:DevDB Information
GidGat White Edition, ROM for the Micromax A116
Contributors
MuzzamilIhsan
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Micromax A116 Device or Clone
Version Information
Status: Stable
Current Stable Version: 6.0
Stable Release Date: 2015-06-22
Created 2015-06-22
Last Updated 2015-06-22
Network Fix
Network Fix
If anyone is facing Network Signals issue then you can flash this Network Fix Patch
https://drive.google.com/file/d/0B0qDIfEwABG4VV9VeUxnYmR3ajg/view?usp=sharing
Download it
Go to recovery
Install zip from sd card
flash it
Hi. I can't download your ROM. Can u plz authorize the download on google drive ?.
Thks bro.
Edit:
Downloading now...
@MuzzamilIhsan Great downloading now. And another thing bro in ur forum there are roms for qmobile a 600 can we flash all those roms on a116???
Pi Darksider said:
@MuzzamilIhsan Great downloading now. And another thing bro in ur forum there are roms for qmobile a 600 can we flash all those roms on a116???
Click to expand...
Click to collapse
Yes bro yo can flash all those because A600 is clone of A116
Done
Request for Color Os
Was jus wondering that can u port latest Color OS if you don mind bro
is there any option or patch to make white theme into black??
thesandyrock said:
is there any option or patch to make white theme into black??
Click to expand...
Click to collapse
No Bro
MuzzamilIhsan said:
No Bro
Click to expand...
Click to collapse
Is there any option to get brightest flash light, flash light in color os roms are the brightest ever
Android M
About Inspired 6
Android 6 inspired rom
De-odexed
Pac**** tweaks added
Dolby Atmos
Android M Platlogo
Android M bootanimation
Android M Launcher
dGreat Music Plus added
Dynamic Staturbar on Display settings
Developer Settings:
* Engineer mode
* Top notification
* Power menu
* Network traffic
* Battery styles
Credit me & vishwaRjeet
Maximum Dev/Port Team
Maximum Dev/Port Team Chat Group
SKK Lynx United Admins Chat Group
SKK Lynx United Octa Group
Fuze Q390 Groups
FMD – Scripts
1https://mega.nz/#!T8hSlSKQ!CW9juVinInG6Fv9w0t9iKHx_tuaSRYOveIn0Qn5rVxE
2https://mega.nz/#!7oYyjIDK!OJNVa5dA309LvJO9WMq3Vitx-YQAJQds-oIHiJTZkqc
3https://mega.nz/#!rtQgiQjL!UuQS19mKc2oUrWcpYRvgieiQbJJHDQZKUEllMXJo25Y
4https://mega.nz/#!TxhxHI7B!6ywFXsxe2qmthsWwZW-Zvnwpq9y8j17BYNQTPOdLarc
5https://mega.nz/#!24Jzna4Z!jfEQm6kJ7A5g3760grpDLk8zO_TcBxNRwyTFU0iR9k0
6https://mega.nz/#!y9BxjTQD!FtsD8zAHpP7NmCHUUsbDD3x0DrolL_-d0y22xM4RiAs
[ROM download link]
https://drive.google.com/file/d/0BwbnrTaT94IHd2oycEJUbVE1YU0/view?pli=1
Root link
https://drive.google.com/file/d/0BwbnrTaT94IHWW4taHhmTjNFLTg/view?pli=1
Medium sound patch
Flash this for sound fix. http://d-h.st/PtqI
How to install:
* Boot into custom recovery
* Look for the zip file
* Flash…
* Wait til finish
* Done
* Reboot device..
* Enjoy
Guys thank you very much providing such cool ROMs and with only 1-2 bugs atmost thank you very much.
But the ui is not smooth like cm 12 lollipop and it is not for a310
Can someone please upload some screenshots? Thanks in advance
---------- Post added 01-10-2015 at 00:18 ---------- Previous post was 30-09-2015 at 23:44 ----------
You have posted this in the wrong place. It should be in the android development thread.
Awesome Work Kishan Bro...
bugs?
What is working and not working?
Even lollipop still has bugs & not completely gone, so can you please mention the bugs remaining?
Thank you for your effort you put in to this ROM.
I am new so dev
Hey can anyone provide volume patch for i phone rom for a310 and htc 820+ rom for a310?
unfortunately android.process.acore has stopped
Not for A310
girijad40 said:
But the ui is not smooth like cm 12 lollipop and it is not for a310
Click to expand...
Click to collapse
Yes, this ROM is not for A310 and this is not known until you start to flash it. Wish it was indicated on the file itself.
Tried it on A310. MAC address is not stable, changing with each reboot, therefore cannot connect to WiFi. Networking stopped working after sometime. Google Store stops working and cannot be revived.
All apps on the Google store are not compatible with M6. Some crash after installation.
Maybe developers can throw in a compatible GAPPS? And give us a ROM suited for A310?
Thanks in advance.
IS it not for A310?
can i flash this ANDROID M ROM on my A310 or not?
This Rom works on Nitro A310
Thanks buddy, i tried this rom on my Micromax Nitro A310 and its works smoothly. There is no lag as mentioned in one of the comment.
I followed below steps.
1. Clean all files of previous OS.
2. Then I flash "UPDATE-SuperSU-v2.14.zip"
3. And then i flash the rom "android M 6.0.1 for nitro by krishan & vishwaRjeet.zip"
4. That's It done.
Hope this will help someone
Yes, you can give a try on your risk as i did.
Alexlee049 said:
can i flash this ANDROID M ROM on my A310 or not?
Click to expand...
Click to collapse
Yes, you can give a try as i did. Follow the steps i mentioned (#12). Disclaimer: Do it at your own risk
can anyone post screenshot of 6.0 rom
Alexlee049 said:
can i flash this ANDROID M ROM on my A310 or not?
Click to expand...
Click to collapse
I tried this sequence and installed the ROM on my A310 a second time.
I confirm that on my A310:
1) MAC address changes every time A310 reboots, which makes it difficult to connect to my Wi-Fi router.
2) The rear camera resolution is stuck at 5MP max (A310 has a 13MP rear camera).
3) Up volume button does not work.
Apart from the above, the ROM is working fine on A310.
Khanrehaan said:
Thanks buddy, i tried this rom on my Micromax Nitro A310 and its works smoothly. There is no lag as mentioned in one of the comment.
I followed below steps.
1. Clean all files of previous OS.
2. Then I flash "UPDATE-SuperSU-v2.14.zip"
3. And then i flash the rom "android M 6.0.1 for nitro by krishan & vishwaRjeet.zip"
4. That's It done.
Hope this will help someone
Click to expand...
Click to collapse
How do you clean all files of previous OS?
ninadajbe said:
How do you clean all files of previous OS?
Click to expand...
Click to collapse
By wipping/clearing data and dalvik cache in custom recovery
I am not able to flash this sound fix patch for my mobile MICROMAX CANVAS NITRO A311..........
Help me to do.......
Otherwise give a new sound fix patch for canvas nitro A311
Hey Bro,
Please Provide Gapps for this ROM as "GOOGLE APP continuously STOPS"
Provide Gapps for this ROM as GOOGLE APP continuously STOPS
Please Provide Gapps for this ROM as "GOOGLE APP continuously STOPS"
It shows error that "unfortunately, google app has stopped"
and this goes on continuously....
Hello, so I have a Posh E500a and i recently ported over Cm12.1 Based exodus ROM. Everything works except one problem. I cant add a google account. Every time I open play or settings to add an account, I get the error listed in the title.
I have already:
Flashed CM 12.1 Gapps
Reflashed ROM
Tried adding # in hosts file
Deleted hosts
Reinstalled play and play services
Everything else connects fine and I can access google websites on browser. I'm at a total standstill so I wanted to ask you wonderful devs here.
I can also send a screenshot of the error if necessary.
Thanks!
same problem
I'll post later my Resurrection 5.5.9/Lollipop 5.1.1/CM12.1 port later for this device. It's completely bugless for me on my POSH TITAN E500A HD (MT6592M), but it was a PITA to get working fully. Don't even tinker around with CM13/Marshmallow 6.0.1 for this device, it's just too buggy and doesn't work for me on this device. I also ported TWRP Recovery 3.0.0-0 to this device. Also, always use PICO GAPPS from http://opengapps.org they are always up to date DAILY and working. For this device just download the generic ARM, 5.1, & PICO version.
ALL CREDITS GO TO:
- MTKROMS.COM
- Fire855 - First bootable CM12.1/Lollipop 5.1.1
- Ajit Guraya - Built this ROM "from source"
- Stylopia King - Ported the ROM to MT6592
- Ashutosh Dubey - Ported the ROM to MT6591
- ME - Ported ROM to POSH TITAN E500A HD
This ROM has been powered by http://mtkroms.com, the original ROM can be found at http://mtkroms.com
Anyways, here's my Lollipop 5.1.1 Resurrection Remix 5.5.9 ROM for the Posh Titan E500A HD:
http://forum.xda-developers.com/android/general/rom-resurrection-remix-5-5-9-posh-titan-t3385111
Credits are found within the post.
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
AbhinavIsgrt said:
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
Click to expand...
Click to collapse
You will get performance close to deodexed KitKat stock rom .. No problems so far .. surely upgrade your device to cm13 :good:
definitely no problems.. just great.
latest nightly works flawlessly..
there is plethora of feature in marshmallow and in being cyanogenmod
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
ulises.rodriguez said:
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
Click to expand...
Click to collapse
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
ABSathe said:
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
Click to expand...
Click to collapse
ABSathe, 1000 Thanks for the quick reply, for letting me know that I can directly clean flash cm13 over 5.1 and for the link to official nightlies !
Please confirm if this is the correct method to flash the CM13 ROM:
1) Boot into latest TWRP and Format Data: Wipe > Format DATA > Yes
2) Transfer ROM to SDCARD or Internal Storage: CM13 ROM + gapps 6.0
3) TWRP > Wipe > Factory reset and flash CM13 ROM, and then Flash gapps 6.0 (flash cm13 and gapps in a single session)
4) Reboot.
However, since I have already installed in my Moto-T, the version 2.8.7 of TWRP ( http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3100879 ), I would like to know if is better and also you recommended me to install first ( using fastboot flash recovery) the cm-13.0-20160810-NIGHTLY-condor-recovery.img (instead of TWRP 2.8.7) ? :
CyanogenMod Recovery:
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor-recovery.img
And then the:
CyanogenMod Build
cm-13.0-20160810-NIGHTLY-condor.zip (322.76 MB)
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor.zip
And Finally - Flash gapps 6.0:
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
https://www.androidfilehost.com/?fid=24533103863139560
One last question, since I know that the CM13 is not based in an official Motorola release, I would like to know what is working flawlessly, and what is not working with in the Moto-E if I use this CM13 ROM ?
Please excuse all the questions, but I will like to be fully sure of the method and the correct files, that I have to use to successfully flash my Moto-E to CM13, to avoid future problems.
Thanks again for all your help !!
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
ABSathe said:
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
Click to expand...
Click to collapse
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
ulises.rodriguez said:
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
Click to expand...
Click to collapse
All the sensors are working perfectly
And regarding gapps .. I have installed older package (which I downloaded in July) .. but the latest one will just work fine
And latest nightly of cm13 is working perfectly for me.. so go for it
Sent from my Nexus 5X using XDA Labs
* I HAVE NOT PORTED THIS ROM. CREDIT GOES TO ORIGINAL DEVELOPER *
Funtouch OS is for Android BBK VIVO phones. It is best known for audiophile phones and one of those is model X3S.
This particular rom is ported from X3S. You will find some nice features in phone's audio settings. Really impressed with the sound quality.
Rom is very smooth, almost like AOSP although is filled with many features. It consumes 0.6 - 1.2GB RAM at average.
What's in:
Google Play and services
Liquid Smooth UI
iTheme - Customize Wallpapers, Effects, Unlock Style and Font
iMusic - SRS audio effect with VIVO Hi-Fi
ViPER4Android FX
One touch 2G/3G SWITCH
Supersaver Mode [Extreme Battery Saver]
Added useful apps (Quick Boot app, Miui file manager, APN setup app)
What's bad:
Camera doesn't shoot in full resolution for 13mp and led notification is green
Download:
ROM: https://goo.gl/tDWIR9
Gapps: https://drive.google.com/open?id=0B9h_-xPUAzqAZUQ5eGhDMHJzZGs
Installation instructions:
- Install ROM (prefer CWM/ Philz)
- Reboot to system
- Gapps included (no need to flash, just download zip file from above link and extract to SD card, then install)
- Reboot again
Leave your phone now for 5 minutes, let it take a breath.
(don't format Data if you use TWRP recovery, only do first four wipes in menu)
Screenshots: home + power button
Bugs:
None till now..
REFER SCREENSHOTS TAB
XDA:DevDB Information
Funtouch OS, ROM for the Micromax Canvas Nitro A310/A311
Contributors
Swagat4187, DAKOK, 77CHEDU
ROM OS Version: 4.4.x KitKat
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 2
Created 2016-10-13
Last Updated 2016-11-07
where is the gapps ? i cant able to found
Do not flash gapps as included in rom. The link for gapps given is to extract the zip file and install the apps post flashing rom.
Games can't be played on this ROM..
:crying::crying::crying:
Installed but not able to download high resolution games, Play store says this device is incompatible due to 4.2.2 OS.
Swagat4187 said:
* I HAVE NOT PORTED THIS ROM. CREDIT GOES TO ORIGINAL DEVELOPER *
Funtouch OS is for Android BBK VIVO phones. It is best known for audiophile phones and one of those is model X3S.
This particular rom is ported from X3S. You will find some nice features in phone's audio settings. Really impressed with the sound quality.
Rom is very smooth, almost like AOSP although is filled with many features. It consumes 0.6 - 1.2GB RAM at average.
What's in:
Google Play and services
Liquid Smooth UI
iTheme - Customize Wallpapers, Effects, Unlock Style and Font
iMusic - SRS audio effect with VIVO Hi-Fi
ViPER4Android FX
One touch 2G/3G SWITCH
Supersaver Mode [Extreme Battery Saver]
Added useful apps (Quick Boot app, Miui file manager, APN setup app)
What's bad:
Camera doesn't shoot in full resolution for 13mp and led notification is green
Download:
ROM: https://goo.gl/tDWIR9
Gapps: https://drive.google.com/open?id=0B9h_-xPUAzqAZUQ5eGhDMHJzZGs
Installation instructions:
- Install ROM (prefer CWM/ Philz)
- Reboot to system
- Gapps included (no need to flash, just download zip file from above link and extract to SD card, then install)
- Reboot again
Leave your phone now for 5 minutes, let it take a breath.
(don't format Data if you use TWRP recovery, only do first four wipes in menu)
Screenshots: home + power button
Bugs:
None till now..
REFER SCREENSHOTS TAB
XDA:DevDB Information
Funtouch OS, ROM for the Micromax Canvas Nitro A310/A311
Contributors
Swagat4187, DAKOK, 77CHEDU
ROM OS Version: 4.4.x KitKat
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 2
Created 2016-10-13
Last Updated 2016-10-15
Click to expand...
Click to collapse
Use Xposed module for playstore fixes.
Wat is the rom source bro? From where you buid this rom? I mean from which device you ported.
ahmed alisha said:
wat is the rom source bro? From where you buid this rom? I mean from which device you ported.
Click to expand...
Click to collapse
i have not built this rom however this was ported from vivo x3s
FunTouch OS 11 Official itheme Manager For Vivo V20 SE kindly provide the link below