hello,
i have a Mate 10 Pro BLA-L09, CLARO, LAT, and use chimera tools for unlock and convert to dual sim and ok, but trying flashing to international rom (BLA-L29 HW SPSEAS) but i was for made for mate 10, without rebrand, i have a mate 10 pro without model and without imei. i need repair,
i tryed flash in fastboot mode but I can not flash the boot and the recovery since it has separate parts.
tanks for your help!
gabriel8adk said:
hello,
i have a Mate 10 Pro BLA-L09, CLARO, LAT, and use chimera tools for unlock and convert to dual sim and ok, but trying flashing to international rom (BLA-L29 HW SPSEAS) but i was for made for mate 10, without rebrand, i have a mate 10 pro without model and without imei. i need repair,
i tryed flash in fastboot mode but I can not flash the boot and the recovery since it has separate parts.
tanks for your help!
Click to expand...
Click to collapse
Solved!
FHRebrandToool New Version 20180410
Related
I have an Mate 10 AL-L29. 2 days ago l tried to rebrand it to chinese model android 8.1, firmware 321. After rebrand l saw my emei is 0000000000. l did it some days ago and all was fine! Now if l make downgrade to a old firmware, my imei is fine, but if l do an upgrade to a new firmware, it doesn't matter ALP-L29 or ALP-AL00, my imei is gone!
Any solution guys? Thanks!
manager77 said:
I have an Mate 10 AL-L29. 2 days ago l tried to rebrand it to chinese model android 8.1, firmware 321. After rebrand l saw my emei is 0000000000. l did it some days ago and all was fine! Now if l make downgrade to a old firmware, my imei is fine, but if l do an upgrade to a new firmware, it doesn't matter ALP-L29 or ALP-AL00, my imei is gone!
Any solution guys? Thanks!
Click to expand...
Click to collapse
hi, I am Brazilian and I have a mate 10 ALP l29 8.0.0.141 and I want to do rebrand for the Al 00 Chinese version but I already tried to generate the unlock code of the bootloader by the unlocked DC but I could not someone help me
Vasodealabastro said:
hi, I am Brazilian and I have a mate 10 ALP l29 8.0.0.141 and I want to do rebrand for the Al 00 Chinese version but I already tried to generate the unlock code of the bootloader by the unlocked DC but I could not someone help me
Click to expand...
Click to collapse
It's not possible anymore, Huawei patched the method dc uses to generate code. They also updated bootloader so it's impossible to downgrade to a build where it does work. There is a thread in the P20 section which has a solution to get code, but it cost 30 euro and I'm only aware of it being tested on P20 (it claims to work on all phones/new firmware)
Hi everyone:
Here is my situation.
I have a mate 10 6+128G. Device information:
Version: EMUI: 8.0.8
Firmware: ALP-AL00 8.8.8.129 (SP2C00)
Bootloader was unlock, I also root my phone, install TWRP, Magisk ... I also install Google Play, Google Service ..
Everything seems fine until I try to use Google Pay.
I got stuck when trying to register VISA credit card in Google Pay, MasterCard is fine.
I did a lot of search on China Huawei forums, and found China version of firmware got issues when register VISA credit card.
I have consulted my friends who have Mate 10, and they said they don't have such problem.
In my country, Mate 10 firmware version is ALP-L29C636, so I would like to rebrand my Mate 10 to this firmware.
But I still have some doubts regarding rebrand.
1. OEMINFO:
Should I replace my OEMINFO before rebranding ? From some post, seems it's necessary to replace OEMINFO with L29C636 version.
If I replace OEMINFO, will I lost my IMEI ?
2. After rebranding, Bootloader will be locked again. So I should use the same unlock code to unlock my Bootloader ?
3. After rebranding, I still want to root my phone. Can I follow the same method to root my phone after flashing new version of firmware ?
Thanks.
Hawco said:
Hi everyone:
Here is my situation.
I have a mate 10 6+128G. Device information:
Version: EMUI: 8.0.8
Firmware: ALP-AL00 8.8.8.129 (SP2C00)
Bootloader was unlock, I also root my phone, install TWRP, Magisk ... I also install Google Play, Google Service ..
Everything seems fine until I try to use Google Pay.
I got stuck when trying to register VISA credit card in Google Pay, MasterCard is fine.
I did a lot of search on China Huawei forums, and found China version of firmware got issues when register VISA credit card.
I have consulted my friends who have Mate 10, and they said they don't have such problem.
In my country, Mate 10 firmware version is ALP-L29C636, so I would like to rebrand my Mate 10 to this firmware.
But I still have some doubts regarding rebrand.
1. OEMINFO:
Should I replace my OEMINFO before rebranding ? From some post, seems it's necessary to replace OEMINFO with L29C636 version.
If I replace OEMINFO, will I lost my IMEI ?
2. After rebranding, Bootloader will be locked again. So I should use the same unlock code to unlock my Bootloader ?
3. After rebranding, I still want to root my phone. Can I follow the same method to root my phone after flashing new version of firmware ?
Thanks.
Click to expand...
Click to collapse
Hi, anyone has experience to rebrand your Mate 10 can help about this ?
Thank you.
Hawco said:
Hi, anyone has experience to rebrand your Mate 10 can help about this ?
Thank you.
Click to expand...
Click to collapse
Talk to this guy: https://ministryofsolutions.com/
Its better and safer to spend some small $ and allow someone who is familiar with rebranding to do the job instead of risking and ends up in a brick. He did a rebrand on my Mate 10 from ALP-L09(C109) to ALP-L09(C432) and I can say it it's not so easy (in my opinion) so my recommendation is to contact him.
I got, to days ago, the B161 (Android 9 + Emui 9) stable version on my Mate 10 Pro BLA-L29 (nordic european).
I'm using two sim, the first one is an italian sim from a virtual operator, the second one is a Vodafone (business) sim.
After a while, i have received a new specific update for the operator I use in the second slot (Vodafone). The update installed itself!
Now, I have the BLA-L29 9.0.0.161 (C432E4R1P11) Emui 9 with a custom version named VDF.IT 9.0.0.6 (LT.F01).
I have never seen an operator custom version installed on a no brand version.
How can I remove this custom version without doing a factory reset?
Thanks to all want help me
NolanBart said:
I got, to days ago, the B161 (Android 9 + Emui 9) stable version on my Mate 10 Pro BLA-L29 (nordic european).
I'm using two sim, the first one is an italian sim from a virtual operator, the second one is a Vodafone (business) sim.
After a while, i have received a new specific update for the operator I use in the second slot (Vodafone). The update installed itself!
Now, I have the BLA-L29 9.0.0.161 (C432E4R1P11) Emui 9 with a custom version named VDF.IT 9.0.0.6 (LT.F01).
I have never seen an operator custom version installed on a no brand version.
How can I remove this custom version without doing a factory reset?
Thanks to all want help me
Click to expand...
Click to collapse
I'm sure a factory reset won't sort it, AFAIK you are stuck with it, unless you are bootloader unlocked, it fancy the FH route.
NolanBart, any succes with debranding?
ghostofcain said:
I'm sure a factory reset won't sort it, AFAIK you are stuck with it, unless you are bootloader unlocked, it fancy the FH route.
Click to expand...
Click to collapse
Did you find solution?
https://forum.xda-developers.com/huawei-p20-pro/help/how-to-carrier-custom-version-update-t3929370
I want to refuse offer to install Custom Version on P20 Pro.
Problem on Huawei P30 Pro [carrier custom patch]
How can we remove such custom patches (carrier custom patches) without rooting?
(I got an update while I was traveling in Singapore. But now I don't need that. EMUI 10 update also contains update for carrier custom patch... I need to remove it before upgrading to EMUI 10)
Can you downgrade (roll back) in hisuite?
Tried my luck on a factory reset and it did remove the carrier config for Starhub SG which automatically installed when I inserted a Starhub SIM. Now I can join beta programs again ?
What carrier config? I use Starhub SIM as well but nothing was installed except APN.
hello guys,
i have a huawei p20 lite and i want to root my phone. but can you root it? i tried dc unlocker for the bootloader code but it says unable to read chipset. And all the tutorials i found are outdated cuz they say i have to go to the huawei website to get my code but you can't do that anymore. is there anyone who can help me root my phone?
phone: huawei p20 lite
model: ANE-LX1
EMUI version: 9.1.0
android version: 9
i dont have an external sd card so i wont be able to do it that way either.
would appreciate all help.
Hello
Step 1 Downgrade with HiSuite
Step 2 Flash old service firmware 8 android , your location
geogsm_1 said:
Hello
Step 1 Downgrade with HiSuite
Step 2 Flash old service firmware 8 android , your location
Click to expand...
Click to collapse
Okay so i have succesfully downgraded my phone from 9.0 to emui 8.0. Need a bit help to flash the firmware. I have read and tried so many things that i don't know what to do anymore. This is the first time im rooting my phone this way so kinda new to this. Got a link or guide? don't want to mess it up.
Ok
now what about build and region ? C432 or ?
geogsm_1 said:
Ok
now what about build and region ? C432 or ?
Click to expand...
Click to collapse
yes c432 region the netherlands
https://androidhost.ru/5O5
geogsm_1 said:
https://androidhost.ru/5O5
Click to expand...
Click to collapse
don't i need to unlock the bootloader before i can flash it?
Step 1 needed downgrade and read booloader code
no, you won’t be able to read the code until you patch the low patch, then you can
Hi I want to root same phone. Did you make it work. I don't have sd card or bootloader code either. I am new in this
Hi,
I bought 1 year ago the Media Pad M5 Pro unbranded from eBay.
I never received any update till now Still on Android 8.0.0 ( Build Nr CMR-AL19 8.0.0.199 (C431)
Huawei Support told me multiple times there is no update available for my device.
But I think they are wrong.
I think it just got the wrong Cust (C431 is made for "providers" but mine has no brand but this firmware)
C432 receives all the updates from Huawei.
So my question is how I can change my Cust from C431 to C432 or directly flash a C432 firmware?
I hope someone can help me in easy steps I think I am not the only one on the whole internet with this problem but in non-forum a solution.
Thanks
4r44444 said:
Hi,
I bought 1 year ago the Media Pad M5 Pro unbranded from eBay.
I never received any update till now Still on Android 8.0.0 ( Build Nr CMR-AL19 8.0.0.199 (C431)
Huawei Support told me multiple times there is no update available for my device.
But I think they are wrong.
I think it just got the wrong Cust (C431 is made for "providers" but mine has no brand but this firmware)
C432 receives all the updates from Huawei.
So my question is how I can change my Cust from C431 to C432 or directly flash a C432 firmware?
I hope someone can help me in easy steps I think I am not the only one on the whole internet with this problem but in non-forum a solution.
Thanks
Click to expand...
Click to collapse
changing to c432 (which is the m5 wifi version, with Kirin 960s not Kirin 960) is quit risky - bootloop
but u could go for the testpoint method and flash treble gsi android 10, need to open bootloader
https://forum.xda-developers.com/mediapad-m5/how-to/downgrade-unbrick-huawei-device-methods-t3915693
its a bit easier with HCU client and dc phoenix( u need the dc unlocker anyway -to unlock bootloader - unfortunatly no other way) but HCU is 20 bucks time license for 3 days
if you really want the the super easy way there is a guy doing it for 30 bucks but u need to give him access to your windows pc(i wouldnt do that) https://ministryofsolutions.com/paid-services
if u find an easier way pls tell me, i gave an cmr-w09 (m5 wifi) and its running super smooth on havoc os(custom android 10)