BLA-L29 8.0.0.140(C432) coming with Face-Unlock - Huawei Mate 10 Questions & Answers

All,
just installed am firmware -available on Funky Huawei- and surprisingly recognized that this FW is coming with Face-Unlock....
Unfortunately, when trying to set-up face recognition I am always getting a message "face-criteria not recognized". Ok tried with with different distances, lightning, moved, unmoved etc....but without any sucess.
Did anybody tried Face-Unlock as well and can advice how to get it set?
THX!
---------solved------just tried it some more times....but finally this feature is coming to the Mate 10------

after a couple of hours, I can say it works great and with the right settings you only need to lift up the phone and it is unlocked....nice fature, hopefully it will be OTAed officially soon!

Funky Huawei down it seems would like to try this

Not paying what they want for 5 credits, only want 1, what a rip off ! I'll wait for firmware finder to get the 140 update.

I notice that my phone is more quick with this update

Can this be ported to C567?
Sent from my BLA-A09 using Tapatalk

Related

Zune Update Now Being Pushed To Lumia's

Nokia is pushing the newest update out to Lumia's now, available through Zune update. Firmware version: 1600.2483.8106.11500
This is meant to be the battery fix. Read more here.
Happy updating
tjramage said:
Nokia is pushing the newest update out to Lumia's now, available through Zune update. Firmware version: 1600.2483.8106.11500
This is meant to be the battery fix. Read more here.
Happy updating
Click to expand...
Click to collapse
I got an update from Zune, but it was OS update only. There was no firmware. Should I restore and try it again?
It'll come later, some have got the firmware and not the OS.
Thanks for letting me know.
I just got a similar reply on Nokia Support. They're being pushed seperately. The user I replied to had received the firmware, but not the OS update yet.
I'll try to be more patient.
I just did the disconnect trick, and it's downloading 8107, will report what firmware I have when it's done
---------- Post added at 09:42 PM ---------- Previous post was at 09:18 PM ----------
Got 8107 + new firmware in one go
Tried the disconnect trick when the last update was being rolled out but wasn't working. :S I thought they fixed it?
Clearly not
Also, MVNO's are better supported now, my phone shows Giffgaff instead of O2-UK, not seen that in a while!
I'll give it a go.. Hopefully it works this time around.. Any tips?
Took me about 5 goes to time it right. Best tip is preserver I guess. I also turned flight mode on as I read that helps.
Rusty! said:
Took me about 5 goes to time it right. Best tip is preserver I guess. I also turned flight mode on as I read that helps.
Click to expand...
Click to collapse
+1 to this. took a few attempts, worked in the end
Just managed to get it updating. It's getting new Windows verison, not sure about FW tho, will have to wait for it to finish and check.
Any noticable improvements yet? I know it's too early though
Mine only said Windows version, but firmware was included too. Auto-brightness seems better, diagnostic app contains more stuff. Charging now to see new capacity.
I just flashed back to 11451 via NCS, then forced the update through Zune.
I got both the OS update and firmware (8106.11500). I'm hoping this firmware is the answer to all our battery problems. Full charge capacity is sitting at 1483mAh. Will post back if it starts to drop (like on all the other firmwares)...
T-Mobile USA Zune Force Update Worked..
Flashed and have joy now..
Like others mentioned above, battery capacity reads 1481 rather than 1517; so was this the correction I wonder?
Will have to see how it performs over the coming days.
Autobrightness seems to work MUCH better; that alone will conserve some power.
Going to close down my system and go home now; I am curious if Bluetooth will be any better. I have a Nokia J - works better than non-Nokia, but have had to re-pair it a few times due to repeated connection dropoffs. Want to see if A2DP will work now. And of course, will try the camera to see if there is anything else good there (in spite of prior reports..)
Cheers
[1st Edit]
Ok, so far BT is holding together but we'll see.. I'll have to see if the belt holster throws it off. Still no A2DP though.. Podcasts, music, and Nokia Drive voices still play through speaker and won't route through headset.
[Edit 2]
Camera.. Nuts.. Spoke too soon. At work under fluorescents.. No pink spot. Came home .. Under halogen, spot is still there unless I use flash. So looks like nothing changed after all except the focus default setting (whoop dee dee... )
[Edit 3] Bluetooth seems very stable.. Going to try now with a non-Nokia earpiece..
apollo15rover said:
Flashed and have joy now..
Like others mentioned above, battery capacity reads 1481 rather than 1517; so was this the correction I wonder?
Will have to see how it performs over the coming days.
Autobrightness seems to work MUCH better; that alone will conserve some power.
Going to close down my system and go home now; I am curious if Bluetooth will be any bettery. I have a Nokia J - works better than non-Nokia, but have had to re-pair it a few times due to repeated connection dropoffs. Want to see if A2DP will work now. And of course, will try the camera to see if there is anything else good there (in spite of prior reports..)
Cheers
[1st Edit]
Ok, so far BT is holding together but we'll see.. I'll have to see if the belt holster throws it off. Still no A2DP though.. Podcasts, music, and Nokia Drive voices still play through speaker and won't route through headset.
Camera.. Hey whaddaya know? The horrid pink spot on non-flash indoors is GONE!!! Hoorah
Now I gotta see if the camera still paints outdoor night shots in the ghastly green as before..
Click to expand...
Click to collapse
Wait... did you flash or update via Zune?
anseio said:
Wait... did you flash or update via Zune?
Click to expand...
Click to collapse
Zune. Didn't appear at first so did a force update..same as how I got Mango before..
apollo15rover said:
Zune. Didn't appear at first so did a force update..same as how I got Mango before..
Click to expand...
Click to collapse
And you got the firmware update, as well as the OS update? No fair! I only get the OS update. I hate being patient.
anseio said:
And you got the firmware update, as well as the OS update? No fair! I only get the OS update. I hate being patient.
Click to expand...
Click to collapse
Nah. Just the f/w.. Got the OS via cab sender 2-3 wks ago. Took the risk because the disappearing keyboard was driving me crazy.
apollo15rover said:
Nah. Just the f/w.. Got the OS via cab sender 2-3 wks ago. Took the risk because the disappearing keyboard was driving me crazy.
Click to expand...
Click to collapse
I'll keep trying. It'll come up one of these days.
I didn't notice the keyboard issue until it was pointed out.
Not getting any updates at all?
Im using the mac os x windows phone connector not sure if thats the problem...
Regions are UK

A2017G Asian Roms B11 update

I just take a look and it appears that B11 is up to download from http://www.ztedevice.com/support/detail?id=98CEB24F9FFD433EA99EC424163149A6 but i've yet to get an OTA from my device is self.... ZTE really need to step up their software strategy and dev and it going to hit them hard if they continue to deliver crappy OS to users.
Same hardware and they are putting different kind of software variant and this is really stupid....
ramnkc said:
I just take a look and it appears that B11 is up to download from http://www.ztedevice.com/support/detail?id=98CEB24F9FFD433EA99EC424163149A6 but i've yet to get an OTA from my device is self.... ZTE really need to step up their software strategy and dev and it going to hit them hard if they continue to deliver crappy OS to users.
Same hardware and they are putting different kind of software variant and this is really stupid....
Click to expand...
Click to collapse
Have you tried forcing the German firmware update? The updates seem pretty universal for G models.
I'll admit, the current approach ZTE adopted for firmware updates for G models is poorly thought out, but at least the German dev team has been as active as the US one, so we still can receive updates/fixes pretty frequently.
Hamburgle4 said:
Have you tried forcing the German firmware update? The updates seem pretty universal for G models.
I'll admit, the current approach ZTE adopted for firmware updates for G models is poorly thought out, but at least the German dev team has been as active as the US one, so we still can receive updates/fixes pretty frequently.
Click to expand...
Click to collapse
Haven't did that yet as i'm busy with my stuffs... but will find some time to do it over the weekend.
I just need to put 7.0 nougat downloaded from http://www.ztemobile.de/support/downloads/?product_id=2100, rename it to update.zip then move it to my root folder. Update via the updater software, after successfully updated i need to wait for the OTA to 7.1.1 again right? Is there anyway to 7.1.1 B02? I'm currently still on MM B10
ramnkc said:
Haven't did that yet as i'm busy with my stuffs... but will find some time to do it over the weekend.
I just need to put 7.0 nougat downloaded from http://www.ztemobile.de/support/downloads/?product_id=2100, rename it to update.zip then move it to my root folder. Update via the updater software, after successfully updated i need to wait for the OTA to 7.1.1 again right? Is there anyway to 7.1.1 B02? I'm currently still on MM B10
Click to expand...
Click to collapse
I think you need to put it onto an SD card. After updating to 7.0, if you aren't prompted for an update to 7.1.1 (I dunno if this has changed since), you want to manually update again, this time to B01 using any of the links floating around the forums.
Once you are on 7.1.1 B01, it should this time prompt you with the B02 update.
ramnkc said:
I just take a look and it appears that B11 is up to download from http://www.ztedevice.com/support/detail?id=98CEB24F9FFD433EA99EC424163149A6 but i've yet to get an OTA from my device is self.... ZTE really need to step up their software strategy and dev and it going to hit them hard if they continue to deliver crappy OS to users.
Same hardware and they are putting different kind of software variant and this is really stupid....
Click to expand...
Click to collapse
So is this the official upgrade from B02 (7.1.1)?
Apparently no just ZTE remove the B10 rom file and placed B11.
What's the point of doing that with so many months delay.
ZTE should had upload the latest B02(7.1.1) and not old B11(6.0.1) to everyone want manually upgrade to latest version since many users don't get OTA anytime.
Sent from my iPad using Tapatalk
paatha13 said:
So is this the official upgrade from B02 (7.1.1)?
Apparently no just ZTE remove the B10 rom file and placed B11.
What's the point of doing that with so many months delay.
ZTE should had upload the latest B02(7.1.1) and not old B11(6.0.1) to everyone want manually upgrade to latest version since many users don't get OTA anytime.
Click to expand...
Click to collapse
Whether that B01 is a final release or a leaked version, you will get an official B02 update prompt.
Regarding the update strategy, It's a poorly thought out process by ZTE. Clearly the German devs are the only ones actively working to keep our devices (G variant) up to date. ZTE should've made this clear to users in other markets once the nougat updates started rolling imo.
It definitely isn't perfect, but it's at least reassuring knowing that we can at least receive updates for our model.
Finally upgraded to nougat 7.1.1 B02 (normal way isn't working now... i had to use this - https:// in front :
dl1.ztems.com/zxmdmp/download.do?doWhat=getUp&filename=firmwarepackages/HK/ZTE/ZTE A2017G/401523/B01%20to%20B02.zip
And issues at MM still exists in Nougat... SO SO SO disappointed.
1. Whatapps voice playback issues still exists
2. Still no prevent pocket dial features
ramnkc said:
Finally upgraded to nougat 7.1.1 B02 (normal way isn't working now... i had to use this - https:// in front :
dl1.ztems.com/zxmdmp/download.do?doWhat=getUp&filename=firmwarepackages/HK/ZTE/ZTE A2017G/401523/B01%20to%20B02.zip
And issues at MM still exists in Nougat... SO SO SO disappointed.
1. Whatapps voice playback issues still exists
2. Still no prevent pocket dial features
Click to expand...
Click to collapse
Might be an isolated problem. I'm not having any WhatsApp playback issues. And no problems with pocket dialing, even with double tap to wake on and thin pockets. Have you considering doing a factory reset?
I'm also using a HK purchased A7.
Hamburgle4 said:
Might be an isolated problem. I'm not having any WhatsApp playback issues. And no problems with pocket dialing, even with double tap to wake on and thin pockets. Have you considering doing a factory reset?
I'm also using a HK purchased A7.
Click to expand...
Click to collapse
Big issues on voice playback, when u playing a voice message try cover the proximity sensor the voice message play out loud via laud speaker. It supposed to play with interspeaker instead. I am hitting hard when I tried to listen to my private voice message by putting near my ear and u know what happened next... It boom at close encounter... Wth.
As the prevent pocket dial feature is never there... It prevent phone accidentally unlock and press while in my pocket. Not dialling in my pocket.
ramnkc said:
Big issues on voice playback, when u playing a voice message try cover the proximity sensor the voice message play out loud via laud speaker. It supposed to play with interspeaker instead. I am hitting hard when I tried to listen to my private voice message by putting near my ear and u know what happened next... It boom at close encounter... Wth.
As the prevent pocket dial feature is never there... It prevent phone accidentally unlock and press while in my pocket. Not dialling in my pocket.
Click to expand...
Click to collapse
Not entirely sure what you mean by the first part. I tried playing back messages (sound from both speakers) then moving the phone to my ear/covering proximity sensor to listen and it seemed to work as intended (sound only from the top speaker). It also adjusted automatically from full blast, to a lower/safer volume level. Sounds like the opposite of what you're experiencing.
I'm curious how your phone is unlocking by itself. I'm on fingerprint/pin setup which seems improbable that it could unlock itself. If you're using smart unlock... I guess the only work around for now is to not use it. Or is it dialing with the emergency dialer? That would be a problem...
Hamburgle4 said:
Not entirely sure what you mean by the first part. I tried playing back messages (sound from both speakers) then moving the phone to my ear/covering proximity sensor to listen and it seemed to work as intended (sound only from the top speaker). It also adjusted automatically from full blast, to a lower/safer volume level. Sounds like the opposite of what you're experiencing.
I'm curious how your phone is unlocking by itself. I'm on fingerprint/pin setup which seems improbable that it could unlock itself. If you're using smart unlock... I guess the only work around for now is to not use it. Or is it dialing with the emergency dialer? That would be a problem...
Click to expand...
Click to collapse
That's strange, it play from the top speaker but it's at full blast.
Manage to update to B04 manually and seems smoother data speed is faster... but my battery drain more faster compare to MM.
ramnkc said:
Manage to update to B04 manually and seems smoother data speed is faster... but my battery drain more faster compare to MM.
Click to expand...
Click to collapse
That's my feeling too but compared to B02.
Faster battery drain while on standby and using it.
Let's see next couple of days for more safe conclusion.
Sent from my iPad using Tapatalk

uk lgv30 gets oreo update .... finally

hi there
my uk lgv30 just got the oreo update with all the ai features .... finally
just thought id give any uk users a heads up , have a great day
Thanks just checked it's now dloading
About time though
Came here to say the same.
Finally, with the required(for me anyway) Bluetooth codec support too, nice.
Got mine too, however it would be nice to know what's changed and improved...
yeah, it finally came but....
i get this annoying notification sound going on constantly, even though there is no apparent notification
anyone know how to fix this ?
buxz777 said:
hi there
my uk lgv30 just got the oreo update with all the ai features .... finally
just thought id give any uk users a heads up , have a great day
Click to expand...
Click to collapse
can you post some screenshots and newly added features.
Oreo update broke fingerprint unlock!
I got mine today. Model number: LG-H930DS (so HK import)
And I can no longer unlock phone with finger scanner! Tried just about everything - restart, fingerprint remove/add, factory reset and setup fresh.
Also notice a glitch in how icons have the square look even after setting "original" style in settings.
Could someone kindly shed some lights on this if they know? Thanks
In the UK here, H930... I've had it running for a few days now, the only thing it has done has destroyed the battery life.
Not very happy; I can still, just, get through a day but I now have to think about carrying my battery pack with me...
I would not update if I were you's...
Update arrived in the uk on a sim unlocked h930ds.

Mate 10 Pro US Firmware Update Finally!

I'm on AT&T in the US and just got the notification this morning for my Mate 10 Pro. Update from 8.0.0.112 to 8.0.0.119 (C567). First update since April. Has anyone installed it yet? Any issues?
I havent received it yet.
This is in the ROM's forum. Sounds like the update is creating camera issues.
Huawei USA Mate 10 Pro BLA-A09 (c567)
khadkapramod said:
I received the new update for US model. But the night mode and lights trail mode doesn't work after the update.
Click to expand...
Click to collapse
Yes. This update breaks night shot and lights trail mode. Also, there is no face unlock. Is there a way to rollback the firmware?
Hope Huawei will release the patch to fix this.
swordstool said:
I'm on AT&T in the US and just got the notification this morning for my Mate 10 Pro. Update from 8.0.0.112 to 8.0.0.119 (C567). First update since April. Has anyone installed it yet? Any issues?
Click to expand...
Click to collapse
In the us on ATT with the same model as well but have not received the update yet. Maybe a good thing
I'm going to hold off on updating then, until more people report in on it's effects .
I got the update this morning and it broke my camera. Night mode does not work at all and the screen is unresponsive. I tried to do a reboot and still night mode didn't work.
Powellw said:
I got the update this morning and it broke my camera. Night mode does not work at all and the screen is unresponsive. I tried to do a reboot and still night mode didn't work.
Click to expand...
Click to collapse
WOW so the screen in the Camera app is unresponsive, or the screen in general? I'm glad I didn't do this update yet!
So this means that Huawei IS supporting US phone with updates! A very good sign.
swordstool said:
WOW so the screen in the Camera app is unresponsive, or the screen in general? I'm glad I didn't do this update yet!
Click to expand...
Click to collapse
It is unresponsive in night mode. Whenever I try to take a photo it will simply not take one
At last , Huawei get us an update, and all is bad jajaja ???????
I am on the same model and AT&T haven't received any update yet. I think they might have stopped the updates after issues being reported.
shreyashmalani said:
I am on the same model and AT&T haven't received any update yet. I think they might have stopped the updates after issues being reported.
Click to expand...
Click to collapse
I can still get it, even after a phone restart, but am going to wait it out.
Any update on the night mode issue? I still don't have a notification for the update
Sent from my BLA-A09 using Tapatalk
shreyashmalani said:
Any update on the night mode issue? I still don't have a notification for the update
Sent from my BLA-A09 using Tapatalk
Click to expand...
Click to collapse
I talked with customer care. They told me that they have pulled back the update after knowing the issues. They will be releasing another update to fix the issue in near future. Could be 1-2 weeks/months/years.
khadkapramod said:
I talked with customer care. They told me that they have pulled back the update after knowing the issues. They will be releasing another update to fix the issue in near future. Could be 1-2 weeks/months/years.
Click to expand...
Click to collapse
I can still see the update, but it's no longer notifying me and asking to implement it. I assume it will be replaced by the new one when they put it out.
Man, that sucks...and no face unlock to boot? Way to go Huewai.
Well, you're all in a good spot, for some reason I cannot update my device, I'm stuck on 8.0.065, and not being able to update.
Hi everyone!
This morning, Aug.1, I received a notification that 8.0.0.119 update is available for Mate 10 PRO (c567).
This means Huawei either didn't pull the faulty update, or they already fixed it. Unfortunately, the update notes say nothing about this.
Having huge doubts whether I should install it and messaged Huawei support to get more info.
Dimmmmkko said:
Hi everyone!
This morning, Aug.1, I received a notification that 8.0.0.119 update is available for Mate 10 PRO (c567).
This means Huawei either didn't pull the faulty update, or they already fixed it. Unfortunately, the update notes say nothing about this.
Having huge doubts whether I should install it and messaged Huawei support to get more info.
Click to expand...
Click to collapse
That's the one I have and it will mess up night mode.

Xperia 1 finger print censor issue

Anyone has the same problem like mine? about yesterday suddenly my fingerprint scanner on Xperia 1 doesn't work properly, always get alert "Not Recognize" my finger when i try to unlock with my finger.
i already tried, re-register my finger, washing my hands, restart myphone, but the censor always keep not recognize, sometime it can read but after 1 or 2 times try it will be back not recognize, anyone has the same issue? is this the software problem or my finger hw problem?
w4lkm4n said:
Anyone has the same problem like mine? about yesterday suddenly my fingerprint scanner on Xperia 1 doesn't work properly, always get alert "Not Recognize" my finger when i try to unlock with my finger.
i already tried, re-register my finger, washing my hands, restart myphone, but the censor always keep not recognize, sometime it can read but after 1 or 2 times try it will be back not recognize, anyone has the same issue? is this the software problem or my finger hw problem?
Click to expand...
Click to collapse
The software update that just got released a day or 2 ago sorts the issue
Mackay53 said:
The software update that just got released a day or 2 ago sorts the issue
Click to expand...
Click to collapse
I had the same issue, even after updating to the new firmware. what i did was i restored/reset (Repaired) via the Xperia companion app. Now at least for me the fingerprint reader works flawless every single time.
So if formatting your phone is an option for you, that should work. (Was a pain re-installing all apps and re-setting all logins and all, but this really ironed out lot of issues for me)
I am on June update and I can tell you that formatting the device does NOT help. I don't have the July update yet to say if that they fixed the issue.
I hate the fact that it doesn't recognize my FP. It feels like Xperia Z5 all again. Then again FP is so deep seated and it's really difficult to use it when there's a case on.
Mackay53 said:
The software update that just got released a day or 2 ago sorts the issue
Click to expand...
Click to collapse
Will update the result of update if the new firmware hit my region.
So far my fingerprint work flawless as it should be after no reason lol.
Xperia 1 - July Firmware FPR Lag Solved/Fixed
As i mentioned before, after the july firmware my FPR works mostly every single time. I guess every phone is different or maybe you can try what i did, it may just work for you.
I did a factory reset using the "Software repair" function in the Xperia Companion with the latest firmware, now the UI is amazingly smoother and the FPR reader works flawlessly.
I have made a small video showing exactly how good the reader works now. If you have the time please watch it and also follow the steps mentioned above if you have the time to restore all the apps and setting, but trust me its better than just living with an awful finger print function.
https://www.youtube.com/watch?v=Rmtl1txPCIo&t=19s
accuracy fingerprint sensor on latest update has significantly improved..
but unfortunately for speed still remain same
It works perfectly for me what I have to get used to the power button, Although it is not necessary to unblock it
Enviado desde mi J9110 mediante Tapatalk
i faced the same issue this awhile
first the sensor worked perfectly but now its a mess
10 try's and 7 not successful
just updated to July security update but nothing is better
DanielMode said:
i faced the same issue this awhile
first the sensor worked perfectly but now its a mess
10 try's and 7 not successful
just updated to July security update but nothing is better
Click to expand...
Click to collapse
to me perfect, register them again
Enviado desde mi J9110 mediante Tapatalk
i did and also each Finger twice...helped a bit but still a gamble to have successful unlock
DanielMode said:
i did and also each Finger twice...helped a bit but still a gamble to have successful unlock
Click to expand...
Click to collapse
have you update to latest firmware?
i'm at 55.0.A.2.314
i tried 20 time now and jsut 1 time successfull unlock
Ditto, no problem with sensor. Clean it possibly?
Just updated to .314. Definitely notice a difference withj fingerprint sensor. Much more accurate.
not here ...mostly i pick up the phone from the table put the finger to the sensor and nothing....not even the display is getting on
then a double tap to see the lockscreen and its telling me i tried to offten ...trie again later
thats it....and i already rescanned my finger prints couple times.....and for the first few hours its working better but than back to the issiuse
DanielMode said:
not here ...mostly i pick up the phone from the table put the finger to the sensor and nothing....not even the display is getting on
then a double tap to see the lockscreen and its telling me i tried to offten ...trie again later
thats it....and i already rescanned my finger prints couple times.....and for the first few hours its working better but than back to the issiuse
Click to expand...
Click to collapse
did you already reset your phone after update?
nope cause the prob popped up couple weeks after i bought it new ....so before the update was out
To me alone with touching it is already unblocked
Enviado desde mi J9110 mediante Tapatalk
I'm on August update and I get this frequently. There is a bug somewhere on this and when I hit the fingerprint issue, I just restart the phone and its perfect again (well after initial pin login due to reboot haha)
It's quite annoying but haven't had time to figure it out. Something with music app running while locked or?

Categories

Resources