Instructions (Short Guideline): >>> More Details Will Be Added Later
1st Method: By Using ADB&FastBoot- Download Lenovo A6000 USB Driver From This Link & Install It
- Download Minimal ADB and Fastboot Tool From This Link & Install It
- Restart The Computer
- Turn-Off The Phone [Remove The Battery & Insert It Again After 5 Seconds]
- Download The Suitable/Proper Custom Recovery For The Last Flashed Rom
-----> For Kitkat, Download This File
-----> For Lollipop/Marshmallow/Nougat, Download This File
- Extract the Compressed File of Custom Recovery & Copy/Move recovery.img To The Folder Of The Installed Application (Minimal ADB and Fastboot)
- Without Removing The Battery Hold (Vol+) Only [Or (Vol+)+(Vol-) Or (Vol-) Only]
- Connect The USB Cable
- Release Vol Button(s)
- Now Open cmd-here From The Folder Of The Installed Application (Minimal ADB and Fastboot) & Type The Following
PHP:
adb devices (Then Click On Enter)
adb reboot bootloader (Then Click On Enter)
fastboot flash recovery recovery.img (Then Click On Enter)
- It Will Be Rebooted Into Recovery Mode
- P.S. In-Case Of Installing A Different Rom, There Are Additional Instructions Must Be Taken In Consideration
- Now Flash The Rom On Lenovo A6000
Kindly Check This Thread Also >>> Installing Custom Rom/Root Lenovo A6000/+Step By Step Easy Guide by ShivaY
Created: Apr.10.2018
Updated: Apr.12.2018
-------------------------------------------------------------------------------------------------------------------------------------------
Click On Thanks Button If The Post Is Useful (Dreamer(3MF))
>>> Sharing A Good Thought Is Gold <<<
-------------------------------------------------------------------------------------------------------------------------------------------
Dreamer(3MF) said:
Instructions:
- Turn-Off The Device
- Hold (Vol+) or (Vol+)+(Vol-) Then Connect The USB Cable
- Now Open command.bat OR cmd-here From The Extracted Folder (Minimal ADB and Fastboot) & Type The Following
adb devices
adb reboot bootloader
fastboot flash recovery recovery.img
- Where recovery.img is a Suitable TWRP Recovery for the Last Flashed Rom & Located In The Extracted Folder (Minimal ADB and Fastboot)
- It will be Rebooted Into Recovery Mode. Now Do The Rest Of Instructions To Flash The Required Rom On Lenovo A6000
-------------------------------------------------------------------------------------------------------------------------------------------
If The Post is Useful, Click on Thanks Button (Dreamer(3MF))
-------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
At least care to edit the kanged post a bit. :sigh:
Thanks To [email protected]
[email protected]_ said:
At least care to edit the kanged post a bit. :sigh:
Click to expand...
Click to collapse
Thanks For Your Comment & Concern. I will take This Opportunity To Thank You For Your TRB Kernel Which is The Greatest Custom Kernel For Lenovo A6000.
Concerning This Post, I tried to search to get the Original Link but Without Any Success so Please If You could help me for Getting That Link, It will be Highly Appreciated To Put This Link Instead Of My Post.
Thanks Again For Your Time & Efforts.
Dreamer(3MF) said:
Thanks For Your Comment & Concern. I will take This Opportunity To Thank You For Your TRB Kernel Which is The Greatest Custom Kernel For Lenovo A6000.
Concerning This Post, I tried to search to get the Original Link but Without Any Success so Please If You could help me for Getting That Link, It will be Highly Appreciated To Put This Link Instead Of My Post.
Thanks Again For Your Time & Efforts.
Click to expand...
Click to collapse
I told you because there's many guides available on xda, and it would be great if you combine all of them including hard brick and imei restore guide into one
hi, there is bootloop problem in my Lenovo a 6000 plus
I install custom rom in twrp but after successful installation, phone do not turn on and stuck at Lenovo logo,
is this battery problem or corruption in phone or twrp.
Ajudia said:
hi, there is bootloop problem in my Lenovo a 6000 plus
I install custom rom in twrp but after successful installation, phone do not turn on and stuck at Lenovo logo,
is this battery problem or corruption in phone or twrp.
Click to expand...
Click to collapse
Kindly Send More Details
- What Is The Last Working Installed Rom? And What About The Android Version?
- What Is The Last Faulty Rom? And What About The Android Version?
- What Is The Version Of TWRP Recovery?
- How Did You Installed/Flashed The Custom Rom?
Last working ROM aex Oreo, twrp 3.x,
Flashed ROM via twrp.
Edit: problem solved by replacing new battery.
Really...?
Ajudia said:
Last working ROM aex Oreo, twrp 3.x,
Flashed ROM via twrp.
Edit: problem solved by replacing new battery.
Click to expand...
Click to collapse
Are you sure that was a battery problem...?
I'm having the same issue, My phone is stuck on the LENOVO logo...not proceeding to boot animation.
I'm using RR 5.8.5.
I tried reflashing the rom....That solved the problem but after a few minutes same problem (Automatically off and stuck on brand logo).
plz reply, i'm looking for help..
Yes, battery replacement solved bootloop, after 2-3 years battery need replacement a
BYes, battery replacement solved bootloop, after 2-3 years battery need replacement as it has small battery almost twice charge daily make life shorter.
First try with another battery or direct power check
SOLVED
Thanks... I'll try with a new battery...
Edit: Problem solved by replacing old battery with new one..:victory:
and Thanks Ajudia....:good::good:
U.Mirza said:
Thanks... I'll try with a new battery...
Edit: Problem solved by replacing old battery with new one..:victory:
and Thanks Ajudia....:good::good:
Click to expand...
Click to collapse
Hello
All of a sudden my Lenovo A6000+ went into bootloop.
Is it the problem of battery ?
I have never replaced my battery since 2-3 years and nowadays the battery capacity is very weak.
Thanks in advance.
yes , you can try direct power supply to phne, or with new battery
Even with direct on power supply it doesn't boot...just stuck at "android" logo(lineage 14.1). I tried other Rom's like RR,ASOP and experience but same thing happening.. any further suggestion will be appreciated.
Hi there.. l need some guide how to solve this problem. l have samsung s3 mini RR7.1.2 .My phone keep restart after i update magis 17. how to fix this.. sorry for my bad english..
Thanks for sharing the guide
my lenovo a6000 after install dotos and it stuck on bootloop when i reboot.
Dreamer(3MF) said:
Instructions (Short Guideline): >>> More Details Will Be Added Later
1st Method: By Using ADB&FastBoot- Download Lenovo A6000 USB Driver From This Link & Install It
- Download Minimal ADB and Fastboot Tool From This Link & Install It
- Restart The Computer
- Turn-Off The Phone [Remove The Battery & Insert It Again After 5 Seconds]
- Download The Suitable/Proper Custom Recovery For The Last Flashed Rom
-----> For Kitkat, Download This File
-----> For Lollipop/Marshmallow/Nougat, Download This File
- Extract the Compressed File of Custom Recovery & Copy/Move recovery.img To The Folder Of The Installed Application (Minimal ADB and Fastboot)
- Without Removing The Battery Hold (Vol+) Only [Or (Vol+)+(Vol-) Or (Vol-) Only]
- Connect The USB Cable
- Release Vol Button(s)
- Now Open cmd-here From The Folder Of The Installed Application (Minimal ADB and Fastboot) & Type The Following
PHP:
adb devices (Then Click On Enter)
adb reboot bootloader (Then Click On Enter)
fastboot flash recovery recovery.img (Then Click On Enter)
- It Will Be Rebooted Into Recovery Mode
- P.S. In-Case Of Installing A Different Rom, There Are Additional Instructions Must Be Taken In Consideration
- Now Flash The Rom On Lenovo A6000
Kindly Check This Thread Also >>> Installing Custom Rom/Root Lenovo A6000/+Step By Step Easy Guide by ShivaY
Created: Apr.10.2018
Updated: Apr.12.2018
-------------------------------------------------------------------------------------------------------------------------------------------
Click On Thanks Button If The Post Is Useful (Dreamer(3MF))
>>> Sharing A Good Thought Is Gold <<<
-------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
my lenovo a6000 after install dotos and it stuck on bootloop when i reboot. please help me solve it thanks
hi,,, i was rinning custom rom(android 10) in my lenovo a6000,, as i wanted to install a new rom i went to Twrp recovery and wiped all data....then turned of my phone but now im not able to enter the recovery mode through the vol+ +power button and my phone is not recognised in my laptop in abd...... CAN SOMEBODY PLEASE HELP ME SOLVE THIS ISSUE???????????
i wipe my all data , rom , and recovery. Now When i turn or or plug in any cable to my phone, it stuck into android screen, i can not flash any recovery by adb method. when i want to use stock rom by QFIl, it does not active the download button, when i plug in my phone by laptop via data cable it recognized a android device....
I JUST WANT GET BACK MY PHONE IN NORMAL STAGE...
Related
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (master✱)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
I tried to install a new rom(cynogenmod 11 from xda forums) in my lenovo a6000 which i god a day before on my birthday. it had lollipop os and i installed TWRP recovery in it. but the instructions for installing rom said to clear data. dalvik, cache before installing and the twrp cleared cache and delvik cache but then it had been over 5 min and it still stated -"formatting data by mounting(bla... bla...) method". so i just reboot the phone by removing the battery and booted in the recovery again. i tried to clear them again but this time all of those three stated mounting problems while clearing. i went on installing the rom but it stuck too stating only these lines:-
1>no md5 checksum found.
2>skipping md5 checksum(bla.. bla...).
so i did the same mistake again and removed the battery to reboot but now it just shows the lenovo logo on bootup and nothing happens thereafter except frequent restarts. i tried to connect it to pc to load recovery via minimal adb and fastboot but the phone is just charging itself via usb cable and not connecting to the pc no matter i reinsert the battery.
i dont want to reach the service center or my dad will kill me for damaging a new phone. please if anyone can help then reply soon or i am gonna screwed.
Just press volume - & power key same time , now your phone is in boot loader mode now connect USB & flash twrp recovery through minimal adb method & restore your backup
Sent from my Lenovo A6000 using XDA Free mobile app
To be continued
Oh I somehow figures it out, I pressed all the keys I.e. volumeup + volumedown + power key even after the Lenovo powered by android logo and it suddenly booted into recovery. This method worked in my bq s37 I didnt expected it in this case. BTW thanks for your support and can u please help in in a new case related to same. The twrp recovery for a6000 lollipop is not installing cm11 properly. Every time I install using the same method as mentioned in a post of XDA. After installation it stops on the same screen:- Lenovo (powered by android) and after that no reboot just that screen forever till the battery dies. I even tried cleaning /system before installing cm11 ROM but still no progress. Please help!
You cannot install cm11 on top of stock Lollipop rom
Revert it back to kitkat flash recovery Then install cm11
Get it of one problem and the other awaits. Now when installing KitKat rom (the official one from techotally) it said unable to mount /data. I followed some tutorial which asked to write some codes from adb shell menu. One of the codes said something like -kill recovery, after what my recovery frooze. I restarted the phone by removing the battery but nothing is happening after that. I am trying to restart it in recovery or in bootloader or even normal restart. Everything in vain and nothing is shown on screen and not even boot logo or the lenovo powered by Android screen. But in my pc some drivers started installing out of which two were installed and two weren't please help.
Ahmad Tawfik said:
Follow this guide
QUOTE]
There is said that ensure the devise is connected as Qualcomm his 9008 drivers but for me windows iinstalls 9006 drivers and States failed to verify signature. I manually installed the 9008 drivers . the installed properly without error but in not cases m getting sahara error. Failed to download. Also my phone doesn't display anything, no display, no sound and no vibrating while powering on but the PC connats it as as Qualcomm hs..............
Click to expand...
Click to collapse
*in both the cases*
Ok I will help you
1- Download stock Lollipop firmware and place it in your sd and insert it in your phone
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S054_150915_WCAA.zip
2-hold volume down and power key and you will see fastboot under powered by Android
3- use fastboot to flash and boot into stock Lollipop recovery
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
http://www.mediafire.com/download/gcg2klu8fwam2sk/Recovery.img
4- in Stock recovery factory rest and wipe cache partition
5- apply update from Sd and select the stock Lollipop firmware the you placed on SDCard
6- Done your phone will boot to system successfully
If you want to install cm11 after fixing your phone
1-revert to kitkat stock firmware follow the guide (like the phone is bricked)
2- Install twrp recovery by fastboot
http://lenovo-forums.ru/index.php?app=core&module=attach§ion=attach&attach_id=36985
3- Install cm11 and enjoy
Note:
place the files you want to fastboot in the fastboot folder
Sent from my GT-I9300I using Tapatalk
You are not correctly getting it my friend. i said the phone doesnt boot at all no matter what key combinations are tried. it simply doesnt start. no display no vibration no sound nothing just the pc detects it as qualcomm hsusb.........
BTW in the mean time my father got to know about this condition. he scolded me but asked to fix it if i can before going to service center. i was just thinking what if they got to know that i rooted the phone? or installed custom recovery in it? anyway if i am to go to the service center the statement given by me will be that:- while updating via ota from kitkat to lollipop the battery died and this all happened. an yes i live in INDIA time zone=+5:30 GMT so tell me when i can find you online(time?) my friend so we can try fixing my phone also it will be help full if we become friends on facebook? so that we can chat live clearly and for as long as we want. so that i can ask you about any problem occouring in future directly without creating a forum in xda. so please buddy please....... .... .. .
The Boy Who Cried Wolf said:
You are not correctly getting it my friend. i said the phone doesnt boot at all no matter what key combinations are tried. it simply doesnt start. no display no vibration no sound nothing just the pc detects it as qualcomm hsusb.........
BTW in the mean time my father got to know about this condition. he scolded me but asked to fix it if i can before going to service center. i was just thinking what if they got to know that i rooted the phone? or installed custom recovery in it? anyway if i am to go to the service center the statement given by me will be that:- while updating via ota from kitkat to lollipop the battery died and this all happened. an yes i live in INDIA time zone=+5:30 GMT so tell me when i can find you online(time?) my friend so we can try fixing my phone also it will be help full if we become friends on facebook? so that we can chat live clearly and for as long as we want. so that i can ask you about any problem occouring in future directly without creating a forum in xda. so please buddy please....... .... .. .
Click to expand...
Click to collapse
My Facebook is [email protected]
I prefer hangout
[email protected]
Contact me any time and I will try to reply directly
Sent from my GT-I9300I using Tapatalk
After flashing the firmware link given by u , Ota will work or not ?
Sent from my Lenovo A6000 using XDA Free mobile app
amit1009000 said:
After flashing the firmware link given by u , Ota will work or not ?
Sent from my Lenovo A6000 using XDA Free mobile app
Click to expand...
Click to collapse
It will work and also this is the latest update
Sent from my GT-I9300I using Tapatalk
I know but only this update is not installing in my device 138mb , so i thinking to flash the full lolipop with this update by ur given link . can i do it ?
Sent from my Lenovo A6000 using XDA Free mobile app
amit1009000 said:
I know but only this update is not installing in my device 138mb , so i thinking to flash the full lolipop with this update by ur given link . can i do it ?
Sent from my Lenovo A6000 using XDA Free mobile app
Click to expand...
Click to collapse
Yes
Sent from my GT-I9300I using Tapatalk
Ahmad Tawfik said:
Ok I will help you
1- Download stock Lollipop firmware and place it in your sd and insert it in your phone
2-hold volume down and power key and you will see fastboot under powered by Android
3- use fastboot to flash and boot into stock Lollipop recovery
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
-- in Stock recovery factory rest and wipe cache partition
5- apply update from Sd and select the stock Lollipop firmware the you placed on SDCard
6- Done your phone will boot to system successfully
If you want to install cm11 after fixing your phone
1-revert to kitkat stock firmware follow the guide (like the phone is bricked)
2- Install twrp recovery by fastboot
http://lenovo-forums.ru/index.php?app=core&module=attach§ion=attach&attach_id=36985
3- Install cm11 and enjoy
Note:
place the files you want to fastboot in the fastboot folder
Sent from my GT-I9300I using Tapatalk
Click to expand...
Click to collapse
But why don't u understand that I can not boot in any mode the danm phone simply doesn't display anything no sound or vibrations and no change of mode too.just connected as quallcomm hsusb and nothing else and even with that and following the ways in the link provided before(boycracked unbrick a6000) I'm getting sahara download error.
Not Install
Dear
Ahmed
When I am try to install the zip its give an erro
phone does not switch to carrier can not install
status (101)
installation abbroat
Please help to install it.
amit1009000 said:
Dear
Ahmed
When I am try to install the zip its give an erro
phone does not switch to carrier can not install
status (101)
installation abbroat
Please help to install it.
Click to expand...
Click to collapse
You have to install it from stock recovery and to factory reset and wipe cache partition before installing the zip
Lenovo updates are very bad and may soft brick you phone
Sent from my GT-I9300I using Tapatalk
install
i tried with stock recovery but same problem.
So it seems I'm being ignored
Hey ahmed
Welcome dear xda_dev user,
Model:Prestigio Multiphone 5451 DUO
My device in the past months stuck in a boot-loop, and.. I googled for loads of threads to read,but they don't really help.
This is what the phone do, and not do:
Can/Works:
ADB sideload (PC see the device!)
Stock Recovery Menu
Can turn off/on the device,screen vibration,etc. works.
No/Not Works:
Can't listen to ADB while booting.
NO TWRP and other Recovery menus installed, only the stock android one.
NO official ROMs available from this company.
Click to expand...
Click to collapse
This is what I tried:
Tried to load 1-5Mb "firmware" updates via ADB Sideload /throwing permission problems/
Tried to Wipe data/cache /didn't boot after this/
Tried to unplug battery <- make it 0% (uncharge)
Tried to load non-company driven ROMs via ADB /permission problems/
Click to expand...
Click to collapse
NO official ROMs available from this company, I asked them to share, but they said I need to go a city (200km) away from me who have "authorized access"..
I kept this thread as simple as possible, BTW I have bought a new device, I still need this mobile because it still worth $50 I think..
Thank you if you can help, and ignore the grammar problems.
Not sure if these are legit firmware files for the duo but seeing you are in this fix it is worth a look i think
https://androidmm6.com/deviceinfo_1701.html
http://www.needrom.com/download/prestigio-pap-5451-duo/
Probably Scam/fake.
The file (rar) is locked via password and it's nowhere published, and it's only 1.65Mb so not really a ROM.
Anyways, I star you up for first and probably last replyer.
If you are able to sideload , then i think you can recover your phone in no time.
First I need you need to know that this procedure is complicated but You can recover your device.
go to mtkroms.com and Download any rom from there as per your wish.
-Remove boot.img from zip file and save it else where
-Sideload the rom
-After sideloading ,reboot device into fastboot by pressing power and both volume keys together until Boot Menu appears where you have the choice to Normal Boot , Boot into Fastboot(Bootloader) and Boot into recovery.
-Use Volume Down to navigate to Fastboot and press Volume Up (or Power button in some devices)
-After booting into fastboot , extract boot.img from .zip file to C:
-type in , fastboot flash boot "C:\boot.img"
-type fastboot reboot
If you are lucky , your device might boot (very slight chance to actually boot)
If it doesnt , no issues , this is where you show your skills as rom porter xD
You wont have access to Android OS , but after dalvik cache has been build , access to adb will be granted.
In the same above mentioned website , there is a tool which can port cwm for any mediatek device.
Download it in your PC , PC should not be windows 10 , Compatibility mode wont work.
Make sure you have Drivers necessary to proceed.
Use the tool and Click automatic porting and follow on screen option to Complete Porting recovery , once the recovery has been ported , reboot into recovery.
Now you will have complete access to adb without any problem.
Once you have a proper working recovery , with adb shell , do the following,
Code:
-adb shell
-df
-cat /proc/partitions
Once you have access to the mount points , you can start DeCompiling kernel and do the necessary changes in fstab
To decompile kernel , there are many tools for Windows and Linux
Google it , if you have any problem , PM me or reply back , I'll be happy to assist you
Hi all!!
This is for all the people who managed to softbrick (or hardbrick) their Lenovo Tab 3 8' (TB3-850F) tablets!
All you will need link, at the end of the post. I don't know for how long it will be up, but you can use it for now.
By the way.... Should you find something useful here... please hit the thanks button in the end
A. Unbrick
This requires flashing a clean stock rom. You will need:
a. stock rom for the TB3-850F (Google is you friend )
b. Sp Flashtool (you can download from their official site). From there, also download the MediaTek USB VCOM drivers and Driver Auto Installer v1.1236.00 (or any latest version).
Steps:
1. Install the windows drivers you downloaded
Note : If you encounter problems installing Windows drivers in Windows 10, google how to install unsigned drivers in Win10
2. Open the folder you extracted SP Flashtool and run it as administrator.
3. Unzip the rom file you downloaded.
4. Inside the folder of your unzipped rom file, look for a file similar to XXXXXXXXXX_scatter_file.txt
5. Load this in the SP Flashtool (click downlad tab, then scatter loading, load this file in there. It should load your rom you will see some colours, etc...
The tricky part:
Assuming you have correctly installed the drivers:
1. turn off the device (well if bricked it is turned off all ready) just make sure, and in SP Flashtool click options and 'with battery'.
2. Click the green download button on SP Flashtool.
3. Hold down the Vol down key on your device and connect it to a usb port.
4. If you see a red line and continue to yellow, all is probably good! Don't let go of the vol - button until yellow line reaches 100%
B. Root and TWRP recovery
This requires that you have or download:
a. platform tools (adb and fastboot)
b. a twrp.img (image file) for the lenovo TB3-850F copied to external SD Card and platform tools folder (google is... useful )
c. latest supersu.zip (flashable) copied to an external SD CARD
d. busybox.apk
Steps:
1. Grab tablet, go to settings ---> about tablet ---> click version number 7 times to enable developer options
2. From settings again click developer options and enable OEM Unlocking and usb debugging
3. Navigate in the platform tools folder. While holding SHIFT right click and select open commandline here (or similar)
4. Connect tablet to PC and in the command line issue: adb devices
If a weird number shows up and says device on the left you are all good to continue.
5. Now on the command prompt again issue: adb reboot bootloader
Your tablet should now reboot to fastboot (big Android, laying down)
6. Issue command: fastboot oem unlock (also check tablet screen for confirmation)
Wait a little bit and reboot your tablet. (should work with holding the power key down for a little longer than 10 seconds. If not hold down volume key and power button for the same amount of time - tested and working)
**At this point it is ESSENTIAL to leave the tablet to fully boot. The bootloader unlock triggers a FACTORY RESET which you must leave to complete and set up your tablet from the beginning.
** It is also ESSENTIAL to complete the boot and set up cycle because, after the automatic factory reset you will need to RE-ENABLE developer options and usb debugging. Once you are done continue to 7.
7. In the platform tools folder copy the twrp.img (you should have downloaded earlier, check upwards... )
8. Open the command line again and type:
a. adb reboot bootloader
b. fastboot boot twrp.img
** This will load up TWRP recovery only for this boot time.
****BE EXTRA CAUTIUS TO -NOT- ALLOW twrp to make modifications. Essential! Should you do otherwise go back to how to unbrick your tablet.
9. Choose install, and install supersu.zip.
10. Choose reboot to system and allow complete boot cycle! Essential!
11. Your tablet should now be rooted. However to succesfully flash the twrp recovery you need to have Busybox installed. Download as .apk and install it (at the time of writing this I believe Busybox 54 is the latest version).
12. Once installed back to the windows terminal and issue:
a. adb reboot bootloader
b. fastboot boot twrp.img
ONCE AGAIN - DO -NOT- ALLOW twrp to make modifications!!!!!
13. From you external SD Card install twrp.img, select recovery when prompted.
14. Reboot to system and enjoy!!!!
Note : Install an app that makes it easy to boot to recovery. (I personally use root essentials - Trying the combination keys did nothing for me, or just poped up the chinese options menu. That does not mean the recovery has not been installed correctly. Booting to recovery from rootessential menu, boots straight to twrp)
All you will need and credits:
https://drive.google.com/drive/fold...ourcekey=0-SDvJaXtWWk-TY9B53ct8dw&usp=sharing (thanks button, thanks button, thanks button!!! )
Results:
(it is in Greek, but you get the idea )
Hope I have helped! Happy playing with the commands and whole process! :good:
Lastly, if you get stuck at any point, you can either use this thread or PM me for further advice, explanation and/or any kind of assistance.
Note: Special thanks to @MotoJunkie01 for actually taking the time to further help people on this thread, as unfortunately I do not currently have the time to do so myself. It is worth checking out @MotoJunkie01 's threads also. There, you can find very useful and updated information.
r&xp said:
Hi all!!
This is for all the people who managed to softbrick (or hardbrick) their Lenovo Tab 3 8' (TB3-850F) tablets!
If you find it useful, just hit thanks in the end
A. Unbrick
This requires flashing a clean stock rom. You will need:
a. stock rom for the TB3-850F (Google is you friend )
b. Sp Flashtool (you can download from their official site). From there, also download the MediaTek USB VCOM drivers and Driver Auto Installer v1.1236.00
Steps:
1. Install the windows drivers you downloaded
2. Open the folder you extracted SP Flashtool and run it as administrator.
4. Unzip the rom file you downloaded.
4. Inside the folder of your unzipped rom file, look for a file similar to XXXXXXXXXX_scatter_file.txt
5. Load this in the SP Flashtool (click downlad tab, then scatter loading, load this file in there. It should load your rom you will see some colours, etc...
The tricky part:
Assuming you have correctly installed the drivers:
1. turn off the device (well if bricked it is turned off all ready) just make sure, and in SP Flashtool click options and 'with battery'.
2. Click the green download button on SP Flashtool.
3. Hold down the Vol down key on your device and connect it to a usb port.
4. If you see a red line and continue to yellow, all is probably good! Don't let go of the vol - button until yellow line reaches 100%
B. Root and TWRP recovery
This requires that you have or download:
a. platform tools (adb and fastboot)
b. a twrp.img (image file) for the lenovo TB3-850F copied to external SD Card and platform tools folder (google is... useful )
c. latest supersu.zip (flashable) copied to an external SD CARD
d. busybox.apk
Steps:
1. Grab tablet, go to settings ---> about tablet ---> click version number 7 times to enable developer options
2. From settings again click developer options and enable OEM Unlocking and usb debugging
3. Navigate in the platform tools folder. While holding SHIFT right click and select open commandline here (or similar)
4. Connect tablet to PC and in the command line issue: adb devices
If a weird number shows up and says device on the left you are all good to continue.
5. Now on the command prompt again issue: adb reboot bootloader
Your tablet should now reboot to fastboot (big Android, laying down)
6. Issue command: fastboot oem unlock (also check tablet screen for confirmation)
Wait a little bit and reboot your tablet.
**At this point it is ESSENTIAL to leave the tablet to fully boot. The bootloader unlock triggers a FACTORY RESET which you must leave to complete and set up your tablet from the beginning.
** It is also ESSENTIAL to complete the boot and set up cycle because, after the automatic factory reset you will need to RE-ENABLE developer options and usb debugging. Once you are done continue to 7.
7. In the platform tools folder copy the twrp.img (you should have downloaded earlier, check upwards... )
8. Open the command line again and type:
a.adb reboot bootloader
b.fastboot boot twrp.img
** This will load up TWRP recovery only for this boot time.
****BE EXTRA CAUTIUS TO -NOT- ALLOW twrp to make modifications. Essential! Should you do otherwise go back to how to unbrick your tablet.
9. Choose install, and install supersu.zip.
10.Choose reboot to system and allow complete boot cycle! Essential!
11.Your tablet should now be rooted. However to succesfully flash the twrp recovery you need to have Busybox installed. Download as .apk and install it (at the time of writing this I believe Busybox 54 is the latest version.
12.Once installed back to the windows terminal and issue:
a.adb reboot bootloader
b.fastboot boot twrp.img
ONCE AGAIN - DO -NOT- ALLOW twrp to make modifications!!!!!
13. From you external SD Card install twrp.img, select recovery when prompted.
14. Reboot to system and enjoy!!!!
Note 1: Install an app that makes it easy to boot to recovery. (I personally use root essentials - Trying the combination keys did nothing for me, or just poped up the chinese options menu. That does not mean the recovery has not been installed correctly. Booting to recovery from rootessential menu, boots straight to twrp)
Note 2: If you encounter problems installing Windows drivers in Windows 10, google how to install unsigned drivers in Win10
I apologize for not being able to post links, but I believe the required software is not particularly hard to find.
Hope I have helped! Happy playing with the commands and whole process! I will continue to help as much as I can :good:
Click to expand...
Click to collapse
Good guide. This tablet has temperamental steps involved with custom recovery and root. This guide gives a good outline of those steps. Here is a link to my thread for Stock Android 6.0 firmware for this tablet for members who need a stock ROM.
https://forum.xda-developers.com/android/general/rom-lenovo-tab-3-8-tb3-850f-android-6-0-t3593043
---------- Post added at 09:08 PM ---------- Previous post was at 09:06 PM ----------
Sorry, didn't mean to quote the entire OP....
MotoJunkie01 said:
Good guide. This tablet has temperamental steps involved with custom recovery and root. This guide gives a good outline of those steps. Here is a link to my thread for Stock Android 6.0 firmware for this tablet for members who need a stock ROM.
https://forum.xda-developers.com/android/general/rom-lenovo-tab-3-8-tb3-850f-android-6-0-t3593043
---------- Post added at 09:08 PM ---------- Previous post was at 09:06 PM ----------
Sorry, didn't mean to quote the entire OP....
Click to expand...
Click to collapse
Thank you, I appreciate your comment. I was really enthusiastic to read that you are working on a pure Stock Android 6.0 ROM for this device! Will definitely be waiting for that!
Thank you again!
r&xp said:
Thank you, I appreciate your comment. I was really enthusiastic to read that you are working on a pure Stock Android 6.0 ROM for this device! Will definitely be waiting for that!
Thank you again!
Click to expand...
Click to collapse
Thank you for the encouragement. I am in hopes that we can eventually get a dedicated device forum for the tb3-850f. I truly believe this tablet has the potential for plenty of future development.
@r&xp I love you so much, I was in the same predicament as you and you helped get my tablet running again. Just wanted to mention, I had to hold volume down when plugging in the USB for the SPFT step instead of volume up. THANK YOU AGAAAAAAAAAAIN <3
Rimmir said:
@r&xp I love you so much, I was in the same predicament as you and you helped get my tablet running again. Just wanted to mention, I had to hold volume down when plugging in the USB for the SPFT step instead of volume up. THANK YOU AGAAAAAAAAAAIN <3
Click to expand...
Click to collapse
Thanks for the comment!!! :silly:
Glad it worked for you. Isn' t it like a really good feeling when you actually see your bricked device boot correctly for the first time after you had almost deemed it unusable???
(also... a... small request... could you please click on that thingy... you know... that ehhh... thanks button??? :angel::angel:)
Just an update, since damaging my TB3-850F, I have since ordered another unit from Office Depot which is due to be delivered Monday or Tuesday. Once it arrives, I'll finish my TWRP flashable stock 6.0 ROM for this device and start back on the modified stock ROM.
r&xp said:
Thanks for the comment!!! :silly:
Glad it worked for you. Isn' t it like a really good feeling when you actually see your bricked device boot correctly for the first time after you had almost deemed it unusable???
(also... a... small request... could you please click on that thingy... you know... that ehhh... thanks button??? :angel::angel:)
Click to expand...
Click to collapse
Lol yessir, thanked!
MotoJunkie01 said:
Just an update, since damaging my TB3-850F, I have since ordered another unit from Office Depot which is due to be delivered Monday or Tuesday. Once it arrives, I'll finish my TWRP flashable stock 6.0 ROM for this device and start back on the modified stock ROM.
Click to expand...
Click to collapse
Looking forward to it. I picked mine up from walmart just yesterday for using as a google maps/car media center
My Lenovo Tab 3 replacement finally arrived in the mail. I'll be picking up where I left off on compiling both unmodified stock and custom stock-based ROMs for this tablet.
On my modified stock based ROM, I'm considering the implementation of Substratum (Root Ver) for theming, but I would like to get the input of other device owners first. So far, I have debloated, deodexed and zipaligned the OS. I am including the modified/patched boot image with SuperSU v2.79 SR3 binaries installed for systemless root, Nova Launcher, Pixel Icon Pack, BusyBox v1.26.2 binaries pre-injected in /su/xbin/, and Kernel Adiutor-Mod installed in /system/apps/ for user defined adjustments to the stock kernel and governors.
You guys please give me input on what you would like included in the ROM. Thanks
r&xp said:
Hi all!!
This is for all the people who managed to softbrick (or hardbrick) their Lenovo Tab 3 8' (TB3-850F) tablets!
Click to expand...
Click to collapse
I had a Lenovo Tab3 that bricked during the initial set up and this saved me for having an expensive paperweight! The process worked like a charm. You ROCK!
chienfou said:
I had a Lenovo Tab3 that bricked during the initial set up and this saved me for having an expensive paperweight! The process worked like a charm. You ROCK!
Click to expand...
Click to collapse
Really glad it worked for you!!!
Thumbs up! :good::good:
load the scatter file .txt in SP Flashrom is OK ... it show me purple color until finish loading the file.
but how come when I hit the green button Download, it seems like nothing downloading,
thanks God, and thank you so muchhh muchhh muchhh for saving my tablet... after 2 days struggling with this brick
thank you the topic thread and MotoJunkie01 led me here :crying::fingers-crossed:
yiukiang said:
thanks God, and thank you so muchhh muchhh muchhh for saving my tablet... after 2 days struggling with this brick
thank you the topic thread and MotoJunkie01 led me here :crying::fingers-crossed:
Click to expand...
Click to collapse
Try again to get TWRP installed to your /recovery partition or, alternatively, try to simply boot into TWRP from fastboot with the fastboot boot twrp.img command. It is common for members to experience some difficulty in installing custom recovery on this device. It has been my experience that most members are successful the second time around.
Thanks MotorJunkie!! But mine after was saved from brick from this thread, i was rooted it also by your instructions from other thread.. Now the gps from GoogleMap doesn't determine the location (even the location already turned on ) ... Plus i couldn't check the systemupdate ( it says connection network failed even i was connecting to wifi already) ...
What should i do, or do you know how to fix it?
yiukiang said:
Thanks MotorJunkie!! But mine after was saved from brick from this thread, i was rooted it also by your instructions from other thread.. Now the gps from GoogleMap doesn't determine the location (even the location already turned on ) ... Plus i couldn't check the systemupdate ( it says connection network failed even i was connecting to wifi already) ...
What should i do, or do you know how to fix it?
Click to expand...
Click to collapse
System updates (OTAs) won't install on rooted operating systems. To install an OTA, you must have unmodified stock /boot, /system, and /recovery partitions installed. On the GPS issue, go to Settings, Apps, and ensure Google Maps has been granted location access permission.
Hi ...
I followed this guide but during the unbricking' I unplugged the device from USB (since I could not see any input on device or indication in SP Flash Tool).
Now the device will not turn on at all (previously I would see the Lenovo Logo splash screen but then it would just stay at this screen. Now i do not see anything).
When I plug into computer by USB, it causes my computer to freeze up (Windows 10).
Any ideas or is this now completely bricked? (hard bricked).
xavier234 said:
Hi ...
I followed this guide but during the unbricking' I unplugged the device from USB (since I could not see any input on device or indication in SP Flash Tool).
Now the device will not turn on at all (previously I would see the Lenovo Logo splash screen but then it would just stay at this screen. Now i do not see anything).
When I plug into computer by USB, it causes my computer to freeze up (Windows 10).
Any ideas or is this now completely bricked? (hard bricked).
Click to expand...
Click to collapse
It sounds like a hard brick. I can't speak for the OP, @r&xp on this, so you may want to get his advice. Have you tried the OP's methods of using your hardware buttons for forcing the device into adb/fastboot recognition? I think this is your only chance of recovering it. By it not powering on, from my experience, a bootloader or bootloader dependent partition has been corrupted, thus hard bricking the tablet.
MotoJunkie01 said:
It sounds like a hard brick. I can't speak for the OP, @r&xp on this, so you may want to get his advice. Have you tried the OP's methods of using your hardware buttons for forcing the device into adb/fastboot recognition? I think this is your only chance of recovering it. By it not powering on, from my experience, a bootloader or bootloader dependent partition has been corrupted, thus hard bricking the tablet.
Click to expand...
Click to collapse
Hello, I'll weigh in on this one. There are multiple threads above the TB3-850F on this forum and also another forum.
I initially followed a different thread and instructions which caused my problem. Notably do not allow TWRP write access !!! This mistake caused the soft-brick.
Anyone following any other advice about TB3-850F or downloading any other image BEWARe. Only follow the advice in this thread by r&xp:
https://forum.xda-developers.com/android/help/lenovo-tab-3-8-tb3-850f-unbrick-root-t3598727
Following this advice I now restored original image and then rooted in just a few hours.. Thank you r&xp for the good advice. :laugh:
Hi everyone,
first of all, I guess there should be a section dedicated to the Z5 to keep the forum clean!
Other than that, I'm really having trouble with my Z5. I can't find a way to move on from fastboot mode! Can't boot to edl, tried to flash recovery but they won't boot and so on...
Do someone has some idea? I can provide every information you need to troubleshoot that!
Thank you in advance,
Lorenzo Benevento.
Hi , inside stock firmware which .img files you have ?
Hello guys,
Could any of you create a brick troubleshooting thread in this model?
I need help with unbricking my Z5. I think I messed up with the recovery partition.
I can't turn it on at all after I press all the button combinations.
I tried the suggestions on the Sahara error that they did on the Lenovo Zuk Z2 with no success.
Does anyone have a workaround for this kind of thing?
edsmanco said:
Hello guys,
Could any of you create a brick troubleshooting thread in this model?
I need help with unbricking my Z5. I think I messed up with the recovery partition.
I can't turn it on at all after I press all the button combinations.
I tried the suggestions on the Sahara error that they did on the Lenovo Zuk Z2 with no success.
Does anyone have a workaround for this kind of thing?
Click to expand...
Click to collapse
Look here for steps that you can try ...
https://blogthetech.com/flash-file-lenovo-z5-l78011-firmware-download-stock-rom/
Good luck : )
Teddy Lo said:
Look here for steps that you can try ...
https://blogthetech.com/flash-file-lenovo-z5-l78011-firmware-download-stock-rom/
Good luck : )
Click to expand...
Click to collapse
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
help
how do u fix it? i have the same problem here, please help
edsmanco said:
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
Click to expand...
Click to collapse
Yes, how do u fix it? Share withy us.
xplozia said:
Yes, how do u fix it? Share withy us.
Click to expand...
Click to collapse
Join the telegram group: Lenovo Z5 Brasil, the guys there can help.
I used qfil to restore it.
I also used the video by rendroid. Send him a PM and he'll reply.
Hi there!
I've been trying out a few things and was wondering how on Earth you got it into fastboot mode in the first place? I can't find a way.
xplozia said:
Hello,
I bricked my Lenovo Z5. I need your help, please!
I installed from fastboot, Pixel Dust ROM and after that, the phone not starting. When I connect the phone to PC, I have message with Unlocking Bootloader (was unlocked initialy, on old rom) then Lenovo logo and after a black screen.
I downloaded ZUI_3.9.075_ST for Lenovo, I installed Qualcomm drivers, I installed Qfill but when connect the phone I don't have 9008 Port, to me is 900E. I read few forums about this error (https://zukfans.eu/community/threads...e-easily.3504/ and https://club.lenovo.com.cn/thread-3021991-1-1.html), I makeed a USB cable for DEEP Flash,I peeled the usb-c cable and touched Green and Black wires, but without success.
I installed a new Lenovo USB driver and with USB cable for DEEP Flash, I put the phone in the 9008 port, and Installed with successful, many ROMs 3.9.075, 3.9.200, 4.0.390 but every time after the first reboot appear message with opened bootloader then Lenovo logo and restarting to infinite.
When the phone is connected to PC I have on the phone a menu with "First Boot Mode" and the phone is accesible from PC:
"C:\Users\user>fastboot devices
bb806aa3 fastboot"
I will apreciate yours help. Thank you!
Click to expand...
Click to collapse
Did you follow this guide? https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/guide-how-to-flash-android-8-1-9-0-t3840839
Yes I see your post and I solved my phone
greetings,
im rookie here but once my MEDIATEK phone got stuck in fastboot mode and i fixed it with connecting to pc and type " fastboot reboot " in adb
edsmanco said:
Hello Teddy,
Thanks for taking the time to reply! Fortunately Rendroid15 helped me to fix it.
Click to expand...
Click to collapse
share the fix
Please refer to the replies above
Lenovo z5s stuck in fastboot
It's been a very long time since this thread was created, but maybe, with some hope i could get some answers, i have the same problem with the z5s, and i can't do anything, all because i mess with the recovery and i can't get out of the same, when i turn off my cellphone and connect a charger, my cellphone boot automatically into fastboot, i need some help, i don't even know if the telegram thing still exists
Thelostman said:
It's been a very long time since this thread was created, but maybe, with some hope i could get some answers, i have the same problem with the z5s, and i can't do anything, all because i mess with the recovery and i can't get out of the same, when i turn off my cellphone and connect a charger, my cellphone boot automatically into fastboot, i need some help, i don't even know if the telegram thing still exists
Click to expand...
Click to collapse
Before, you installed a new qfil rom? If yes, folow the instruction from https://forum.xda-developers.com/showpost.php?p=77583961&postcount=2 and install Pixel Experience:
2. fastboot flash vbmeta vbmeta.img
3. fastboot flash boot_a boot.img
4. fastboot flash boot_b boot.img
5. fastboot -w flash system_a PixelExperienceP-arm64-ab.img
6. fastboot -w flash system_b PixelExperienceP-arm64-ab.img
xplozia said:
Before, you installed a new qfil rom? If yes, folow the instruction from https://forum.xda-developers.com/showpost.php?p=77583961&postcount=2 and install Pixel Experience:
2. fastboot flash vbmeta vbmeta.img
3. fastboot flash boot_a boot.img
4. fastboot flash boot_b boot.img
5. fastboot -w flash system_a PixelExperienceP-arm64-ab.img
6. fastboot -w flash system_b PixelExperienceP-arm64-ab.img
Click to expand...
Click to collapse
Don't worry i've already solved with some CHINESE PIROMANCY!!!!!!! Even with effective IMEI restoration (I couldn't restore the 2nd IMEI because I didn't know how to set up this one manually with the method I've used with my lenovo)
Hello,
I have a Lenovo Z5s. I wanted to install new android rom like Pixel Experience
I managed to unlock the bootloader with adb fastboot.
I succeeded in flashing TWRP recovery 3.3.1-0529 for my device.
I've downloaded Pixe Experience GSI rom available here https://forum.xda-developers.com/z5...evelopment/lenovo-z5s-pro-twrp-3-3-1-t3953346
I have copied and pasted the Pixel Experience rom (.img file) on my SD Card.
With TWRP, I have wiped necessary files for a clean install.
I have launched the installation of the rom, installation was complete, the phone has reboot, I show Pixel Experience boot sequence with Google logo. The process asked me a password (Encrypted?) . I decided to reboot the phone.
Now, the phone is blocked with a bootloop in recovery mode. I can't access anymore to TWRP recovery. (Erased?)
To explain clearly the situation: I have the menu showing these options: Restart bootloader > Recovery mode > Power Off > Boot to FFBM > Boot to QMM I> Start
FastBoot Mode
PRODUCT_NAME - sdm710
VARIANT - SDM EMMC
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - ********
SECURE BOOT - yes
DEVICES STATE - unlocked
No Bootloader, no Baseband.
All of the options return the phone back to the same menu.
The situation seems to be critical (phone bricked) and I can't do anything and I don't know what to do. Is there a chance to save my phone?
Your help will be precious to make my phone work.
Thanks in davance . Best regards.
Hey guys i am also in bootloop with unlocked bootloader ,can you please help us to save our phone !!!???